For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme.  Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet.  More recently, I added an iMac and iPhone.   PROBLEMS:  A few months ago the Mac mini lost its connection to  the printer, and now it cannot locate the network at all. 

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

Similar Messages

  • My macbook seems to be very slow in connectivity to the internet using our airport extreme while others can just go buzzing along surfing the net and/or downloading items. What gives with mine?

    i don't understand why my Macbook seems to balk or go incredibly slow when I'm trying to connect or surf the internet at home. When I'm at work ( I use a company owned laptop and have used one of their laptops for several years, this one noe for about three years but have just started having this problem in the last 6 - 8 months) it works fine but at home slow, slow, slow!!! at home it takes about 3-5  minutes for any page to load in and if there are a lot of images or videos to load, well take a coffee break while it loads in when you come back the page might, might be loaded. I'm using my partners ibook G4 right now and connectivity is great no problem but mine had yet to even load in the apple homepage yet and I had to go get this one, turn it on, open up a browser, log in, type my question out and yet over on my laptop, it's still trying to load.Can anyone give me a clue as to what's going on?

    i don't understand why my Macbook seems to balk or go incredibly slow when I'm trying to connect or surf the internet at home. When I'm at work ( I use a company owned laptop and have used one of their laptops for several years, this one noe for about three years but have just started having this problem in the last 6 - 8 months) it works fine but at home slow, slow, slow!!! at home it takes about 3-5  minutes for any page to load in and if there are a lot of images or videos to load, well take a coffee break while it loads in when you come back the page might, might be loaded. I'm using my partners ibook G4 right now and connectivity is great no problem but mine had yet to even load in the apple homepage yet and I had to go get this one, turn it on, open up a browser, log in, type my question out and yet over on my laptop, it's still trying to load.Can anyone give me a clue as to what's going on?

  • My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?

    My westel modem (that I rent from my phone provider) quit working with the internet.  My airport extreme seems to be working from the dsl (phone) connection through the westel, then through the ethernet cabled to the airport extreme.  Do I need the modem?  Is the ethernet route less efficent that going throught the internet connection?  If I don't need the westel modem; how do I make the dsl conection to the pone port in the wall?  Thanks for help on this!

    Ok, so are you saying that your Internet is or isn't working?  Does it work if you plug your computer directly into your computer and bypass the router (make sure you power cycle the modem when you do this)?  If it is working this way, then a new modem isn't going to solve a problem with your Internet not working.  If it is going slow (try running a speedtest) then you need to call your phone company to have them take a look at why your Internet is slow.  If it runs fine this way and then slows back down when you go back through your router there is something else going on.  Try unplugging both the modem and the router, let the modem fully sign back in and connect to the Internet, after it gets signed in, plug your router in, and then after it boots up fully, try running the speedtest again...See if that helps any?  Sometimes it's just an IP conflict that happens when the dynamic IP that is assigned by your Internet Service Provider changes and the change doesn't flow smoothly.

  • HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password.  What am I doing wrong?

    My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password. 

    If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
    Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
    Select the AirPort Extreme and click Manual Setup
    Click the Wireless tab just below the row of icons
    Click the Wireless Network Options button
    Remove the check mark next to Create a closed network
    Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

  • Is it possible to access my DVR from the Internet using an Airport Express and Airport Extreme?

    I would like to use my Airport Express to connect to my DVR and use it to access the Internet by setting it up to wireless extend my Airport Extreme network?
    This would allow me great flexibility to place the DVR wherever I wanted.  I would create a static IP address for the DVR but would I also have to create one for the Airport Express as well?  What would I put as my Gateway address?  Would it be the IP address of the Airport Extreme or the Airport Express?
    Looking forward to the advice to see if this is possible...

    It may not be compatible with the iPad. See below for reference.
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • HT1126 I've just connected to a Time Warner cable modem and am no longer able to connect to the internet using our Airport Express.

    Would love some suggestions as to ho to get thi airport working again!

    I too just got time warner. I now have a motorola surfboard sb 6141 attached to my airport extreme. I have had problems with the AE when I was on DSL. I had to unplug it on average every 2 days to reset it as I would loose my WIFI connection. I've updated it to the most recent firmware and I reset it to factory condition when I joined Time warner today.
    The modem and router are in the kichen and if I'm on my laptop there the connection is almost alway great. But occasionally it becomes bad. In my office on the iMac the eventhough the signal strength is excellent the speed is either great or exceedingly slow. If I unplug the router and plug it back it, it becomes speedy again in the office. So I guess I need a new router, but this one is only a year old. Any suggestions?

  • My iPhone will not connect to the internet at my Airport Extreme station

    Yesterday I updated my Aiport Extrems firmware, all configuration is the same as before, and all my macs connects fine to internet.My iPhone connect fine to the network, but will not connetc to the internet. In my neighbours network there is no problems with internet connection.
    It is weard that an Apple product no more fit to another Apple product...or what?
    Does anyone have a solution?

    Sorry, I found the error, FIXED

  • External antenna to extend the range of an Airport Extreme 802.11g

    What is the best external antenna for extending the range of my Airport Extreme? My studio is in an old metal building and I want to send the single to my house which is about 50' away. The metal blocks the signal so I believe I need some kind of directional antenna. Any advise?

    Here are a few you can check out ...
    o Dr. Bott's ExtendAIR Direct Antenna
    o QuickerTek 27dBm Transceiver

  • I am using an Airport Extreme for wireless and a Netgear VPN Switch for wired connections.  How do I get the two networks to connect?

    I am using an Airport Extreme for wireless and also have a Netgear VPN Switch (FV5318) for internal wired ethernet connections.  How do I get the two networks to connect to each other?

    Tesserax, I would like to keep the Airport Extreme in nplace before the Netgear FVS318 switch because I am using all of the 8 ethernet outputs distributed to 8 differerent locationsl  This way I can just use one of the LAN outputs from the Airport to feed the FVS318.  Here is what I think I am hearing you say:
    Tne reason why the wired and wireless devices are not communicating is because the FVS318G is also a DHCP server and in conflict with the AEBS.
    To remedy the situastion here is probably what I need to do in order:
    1. Change the LAN IP Address of the Netgear FVS318G to be the same subnet of the Airport Extreme.
    2. Then, disable the Netgear FVS318G as a DHCP server.
    3. Make sure the ethernet cable from the LAN port of the Airport Extreme connectis to the LAN port of the Netgear FVS318G.
    4. Restart everything.
    Can you provide me the steps I need to take to get the right IP addresses from the Airport Extreme to put into the Netgear to fix the conflict?  I have the Airport Utility.  I also have two airport express hot spots, and two Apple TVs in addition to computers attached to the 8 ethernet lines.
    Thank you.
    Steve

  • I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets.  Can I use an Airport Extreme as my router and not use the FiOs router?

    I want to use an Airport Extreme as my router.  I currently have a Verizon FiOS router.  I have Verizon for phone, internet and TV.  However, TV-wise, I just have a basic service for one TV with just a regular box.  No HD, no DVR.  Don't need access to a menu, widgets, on-demand.  Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

    I know that it will increase my wireless coverage in my house but will it increase the speeds?
    Not sure what you are asking here.  The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
    If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area.  But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
    If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

  • I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with it any more. I don't think I can upgrade the Spin Doctor without buying a new program.  Is there a way to undo the last iTunes update?

    I accepted a recent update for iTunes and now my version of Spin Doctor can't communicate with iTunes, specifically, I can't get music files to go over to iTunes.  Spin Doctor gives me a message indicating that iTunes isn't working properly.
    I am using iTunes 9.1.1(12) and Spin Doctor 3.1.1.304t.  I have investigated upgrading the Spin Doctor but I think too much time has passed and the version available are too far advanced. 
    Any ideas?  Can I undo the iTunes upgrade?  Is there a website that I can go to to get the upgrade for my Spin Doctor?
    Thanks.
    Mary

    If your iMac is an Intel CPU model, you can upgrade the OS to OS X 10.6 Snow Leopard.
    Then use software update to update 10.6 Snow Leopard to OS X 10,6.8.
    Then you can run the latest iTunes to sync your iPad running iOS 6
    You can purchase OS X 10.6 Snow Leopard by calling Apple at 1-800-MYAPPLE. Ask for retail software sales and purchase a copy of 10.6 for $19.99 plus shipping.

  • Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

    I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

    You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
    Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
    Open AirPort Utility, select the Time Capsule, and click Manual Setup
    Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
    Next, click the Wireless tab located to the right of the Time Capsule tab
    Change the setting for Wireless Mode to Off
    Click the Internet icon, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
    You are all set

  • I tried to do the download of a magazine pays when clicked buy my ipad shows a text saying that I have to communicate with the support of the itunes store. I do not know what I have to do and how.

    I tried to do the download of a magazine pays when clicked buy my ipad shows a text saying that I have to communicate with the support of the itunes store. I do not know what I have to do and how.
    Help me 

    Hi gmoll5,
    Welcome to the Support Communities!
    If you have updated to iTunes 11, click on View > Show Sidebar
    Then, select your playlist and choose File > Print
    You will have the option to print a jewel case like you did before
    iTunes 11: Frequently used features
    http://support.apple.com/kb/HT5649http://support.apple.com/kb/HT5649
    iTunes 11 for Windows: Create your own CDs and DVDs
    http://support.apple.com/kb/PH12348
    iTunes can print a playlist formatted for use as a jewel case insert; choose Command-P and select “CD jewel case insert.”
    Cheers,
    - Judy

  • Brand new MacBook -- how can it communicate with my old iMac

    I just got a new 2.2 GHz MacBook (black) with the current version of Leopard installed (10.5 I guess, I'm posting this from my PC at work, so I can't check). No real problems so far. I've been able to access the Internet through my cable modem at home (had to unplug my desktop, more on that below) and through Wi-Fi.
    I still have and plan to keep my G3 iMac desktop machine, running OS 10.2.8, and my basic question is how I can get my two Macs to talk with each other. I don't currently have any sort of network at home -- I'm the only computer user. Setting up an AirPort station would make sense, since it would allow me to use the MacBook anywhere in the house. I'd need to install an AirPort card in the iMac, and the card that's currently available in the online Mac store is AirPort Extreme, which I don't think would work with the old iMac. (The specs say "AirPort Extreme Cards cannot be used in AirPort-ready computers with an AirPort Card slot.") Does any one know if there's a way to use the same AirPort station with both computers.
    Since the primary reason for the computers to communication with each other would be to share files, connecting them with some sort of cable would be another option. When I asked the Apple store salesman what I would need, he sold me an Ethernet cable, but that doesn't seem to do the job. If I connect it to the Ethernet ports on both machines, they don't seem to see each other. Do I need some kind of router to connect both machines? Actually if there was a router that connected both computers to the cable modem, one cable could go to the iMac and the other to an AirPort station that would communicate with the MacBook, solving my issue above. Can I do anything via USB ports?
    If all else fails, I could e-mail files to myself, but seems a rather roundabout way of doing things.

    Usually you use a router as the hub for the computers to talk to each other over Ethernet wires or WiFi. When you hook the two computers up directly, you need a cross-over Ethernet cable, which is different from a standard Ethernet cable. (Although some of the newer computers can sense and use either, but I'm not sure about the older G3.)
    A wired/wireless router would definitely be the way to go, why not take advantage of your MacBook wireless capability? This will let you share the internet connection, share files, and a printer between the two computers. Just about any router would work from Netgear, Linksys, Newer Technology, or the Apple Airport. Using an Airport Extreme Base Station would allow you to use an Ethernet cable for the G3 iMac and the WiFi for the Macbook. I currently use one this way with my older G3 Desktop and a MacBook. (I think the first time you start up the Airport you configure it over the Ethernet cable, I don't remember if you can do it wirelessly or not the first time.) You plug the cable modem into the router, then each computer into the router, (or connect over WiFi).
    Once you have the Airport set up you can turn on file sharing and access each other's hard drive and printer over the network. Should you ever get a PC or have a visitor with one, they can connect also. Set up the password protected encryption and don't broadcast the network name so passersby can't see and connect to your network.

  • "iChat can't communicate with the jabber account, disconnected unexpectedly"

    We are running a Snow Leopard server here in the office, but no one can connect to iChat with their given jabber id. I have tried manually putting the settings in, I have tried letting the computer configure them itself [through system preferences -> accounts -> login options and choosing the networked server], and I have gone through the manuals. I have gone into the server itself and made sure everything is on and functioning, but it just won't connect. I keep getting the same message. I'm guessing there's some small setting that I don't have set right, I'm just not sure what it is and don't even know where to start looking.
    "iChat can't communicate with the Jabber account "[email protected]". Disconnected unexpectedly"
    I've looked through the community and none of the given directions have helped.  I posted on the iChat section, but they suggested I post here. Can anyone out there help me out? We're a small design studio, so we don't have an IT person to do this for me.
    Thanks,
    Gretchen

    No, I know, you always have to assume the other person knows nothing   Okay, through some finagling, I managed to save the log to the server, copy it to my computer from there, and now can copy and paste in here. This is all that was in there at this point:
    3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: version: jabberd sm 2.1.24.1-326.6
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: attempting connection to router at 127.0.0.1, port=5347
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61278] connect
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'announce' added to chain 'pkt-sm' (order 6 index 11 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'help' added to chain 'pkt-sm' (order 7 index 17 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61278] authenticated as jabberd
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'echo' added to chain 'pkt-sm' (order 8 index 18 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'pkt-user' (order 0 index 3 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'presence' added to chain 'pkt-user' (order 1 index 12 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-vcard' added to chain 'pkt-user' (order 2 index 5 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'amp' added to chain 'pkt-user' (order 3 index 9 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'deliver' added to chain 'pkt-user' (order 4 index 13 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/s2s[98312]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [s2s] set as default route
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'pkt-user' (order 5 index 4 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [s2s] online (bound to 127.0.0.1, port 61276)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'offline' added to chain 'pkt-user' (order 6 index 10 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/s2s[98312]: [::, port=5269] listening for connections
    Jan  6 11:53:52 marquardtplus jabberd/s2s[98312]: ready for connections
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'pkt-user' (order 7 index 19 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-last' added to chain 'pkt-user' (order 8 index 0 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'session' added to chain 'pkt-router' (order 0 index 14 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco' added to chain 'pkt-router' (order 1 index 8 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-load' (order 0 index 20 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'user-load' (order 1 index 3 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster-publish' added to chain 'user-load' (order 2 index 21 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'privacy' added to chain 'user-load' (order 3 index 2 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'user-load' (order 4 index 19 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'user-load' (order 5 index 4 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-create' (order 0 index 20 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'template-roster' added to chain 'user-create' (order 1 index 22 seq 0)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'active' added to chain 'user-delete' (order 0 index 20 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'announce' added to chain 'user-delete' (order 1 index 11 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'disco-publish' added to chain 'user-delete' (order 2 index 19 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'offline' added to chain 'user-delete' (order 3 index 10 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'privacy' added to chain 'user-delete' (order 4 index 2 seq 4)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'roster' added to chain 'user-delete' (order 5 index 3 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'vacation' added to chain 'user-delete' (order 6 index 4 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-last' added to chain 'user-delete' (order 7 index 0 seq 3)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-private' added to chain 'user-delete' (order 8 index 7 seq 1)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: module 'iq-vcard' added to chain 'user-delete' (order 9 index 5 seq 2)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: version: jabberd sm 2.1.24.1-326.6
    Jan  6 11:53:52 marquardtplus jabberd/c2s[98309]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [c2s] online (bound to 127.0.0.1, port 61277)
    Jan  6 11:53:52 marquardtplus jabberd/c2s[98309]: [::, port=5222] listening for connections
    Jan  6 11:53:52 marquardtplus jabberd/c2s[98309]: ready for connections
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: attempting connection to router at 127.0.0.1, port=5347
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61279] connect
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61279] authenticated as jabberd
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [marquardtplus-server.local] online (bound to 127.0.0.1, port 61278)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98307]: ready for sessions
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: connection to router established
    Jan  6 11:53:52 marquardtplus jabberd/router[98308]: [marquardtplus.private] online (bound to 127.0.0.1, port 61279)
    Jan  6 11:53:52 marquardtplus jabberd/sm[98306]: ready for sessions
    Jan  6 11:53:52 marquardtplus servermgrd[81]: servermgr_jabber[N]: jabberd service startup completed.
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61284] connect
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61284] authenticated as conference.marquardtplus.private
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [conference.marquardtplus.private] online (bound to 127.0.0.1, port 61284)
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61285] connect
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61285] authenticated as pubsub.marquardtplus.private
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [pubsub.marquardtplus.private] online (bound to 127.0.0.1, port 61285)
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61286] connect
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61286] authenticated as proxy65.marquardtplus.private
    Jan  6 11:53:53 marquardtplus jabberd/router[98308]: [proxy65.marquardtplus.private] online (bound to 127.0.0.1, port 61286)
    Jan  6 11:53:54 marquardtplus jabberd/resolver[98305]: attempting connection to router at 127.0.0.1, port=5347
    Jan  6 11:53:54 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61289] connect
    Jan  6 11:53:54 marquardtplus jabberd/router[98308]: [127.0.0.1, port=61289] authenticated as jabberd
    Jan  6 11:53:54 marquardtplus jabberd/resolver[98305]: connection to router established
    Jan  6 11:53:54 marquardtplus jabberd/router[98308]: [resolver] online (bound to 127.0.0.1, port 61289)
    Jan  6 11:53:54 marquardtplus jabberd/resolver[98305]: ready to resolve
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] [::ffff:192.168.1.132, port=61291] connect
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] SASL authentication succeeded: mechanism=DIGEST-MD5; [email protected]
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: checking user "com.apple.notificationuser" access for service "chat"
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: mbr_check_service_membership returned 0
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: od_auth_check_service_membership: user "com.apple.notificationuser" is authorized to access service "chat"
    Jan  6 11:53:58 marquardtplus jabberd/c2s[98309]: [7] bound: [email protected]/icalserver.9c433d7eee6b45a 481f8d560b46ca943
    Jan  6 11:53:58 marquardtplus jabberd/sm[98306]: session started: [email protected]/icalserver.9c433d7eee6b45a 481f8d560b46ca943
    The only users I've tried to log on so far are [email protected] [myself] and [email protected], both got the same issue.
    If there's anything else I can provide, I will happily do so.
    Thanks,
    Gretchen

Maybe you are looking for

  • Why are some fonts not available?

    I have found that there are fonts in HD>Library>Fonts that are not showing up in any Collection in Font Book and are not available in apps that I'm working with. Font Book Help does not address this problem. Some help with this, please? Peter

  • Spry Validation Confirm Widget

    Ugh.  This is driving me nuts! I've used the Spry Validation Confirm Widget successfully before, but for some reason I can't spot, I get this error message every time I try to load the page: Spry.ValidationConfirm ERR: The element ConfirmPasswordWidg

  • Adobe Print form error: Initialization of the font server module failed.

    Hi all, When trying to open a PDF preview the error below is displayed: "Initialization of the font server module failed." The problem occurs with SAP GUI 7.10 patch 15 and Adobe Reader 9 With SAP GUI 7.10 patch 12 and 13 with Adobe Reader 9 the prob

  • Dynamic characteristics scenario

    Hi experts, Im facing a problem figuring out the best way to do this. In ECC I have data with this structure Msg class; No Msg; Char_name; char_value; numeric_value ZSOMETHING;1;POSTING_DATE; 01.01.2009      ZSOMETHING;1;SOME_RATIO_1; 9.5 ZSOMETHING;

  • Search terms: boolean and exact phrase

    I constructed my search terms per the "tips" to find messages containing the exact phrase "save as" and the word corrupt: "save as" AND corrupt the search returned a list of messages with the word "corrupt" highlighted as I would have hoped, but it a