For all you folks trying to install a new DVD burner with no luck
I just bought a Panasonic UJ 841 for my Toshiba A100. It contains BOTH master and slave firmware. I installed the drive and like most of you it disn't see the drive in the BIOS. I contacted the guy in Taiwan who I bought the drive from and he showed me the slickest trick I have seen in a while. You DO NOT NEED TO FLASH THE FIRMWARE TO MAKE IT A SLAVE DRIVE. Here is his fix and photos telling you how to deal with the problem. I take no responsibility if you screw up your drive doing this. It requires no soldering. It worked for me like a charm. This is for your information only. If you do it you do it at your own risk. (which is very little).
www.meyersmultimedia.com/panasonicfix
Enjoy. Hope it helps you all out. May also work with other drives but this one I know for sure it does. If you need one of these drives they are 76.00 free shipping at http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350148525780&ssPageName=ADME:X:RTQ:US:1123
Message Edited by rick7653 on 01-20-2009 02:07 PM
Solved!
Go to Solution.
Works fine,on Toshiba a135...ASUS
Similar Messages
-
Trying to Install latest version of Adobe with no luck
I just purchased a new iMac running Mac OS X Lion 10.7.2. When I go to the adobe site to check my version of adobe it says I have 9.0.124.0. I follow the instructions for dowloading and running the uninstaller and I get a notice that the uninstall was successful. I reboot then return to the adobe page to see if the unisnstall was successful but the old 9.0.124.0 is still there. Any ideas why I can't install the latest player?
Adobe is a company name, not a product. Do you mean Flash Player? Or Shockwave Player?
-
I have not been able to copy and paste in firefox for the last two months. My research on the topic has led me to try the disabling all plugins, creating a new profile in safe startup, I removed appInit_dlls from my registry, could not find pushowxx adware, installed lastest version and updates of firefox, etc. All to no avail.
Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave -
See diagnostic report below. What is error 2355? I do not have a virtual DVD....
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv7 Notebook PC
iTunes 11.0.4.4
QuickTime not available
FairPlay 2.4.14
Apple Application Support 2.3.4
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CB7800AA5EE70
Current user is not an administrator.
The current local date and time is 2013-08-12 23:44:07.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9600M GT
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.4.4 (x64) is currently running.
iTunesHelper 11.0.4.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.3.0),
Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
G: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.By the way, Problem is now fixed
I just installed 11.0.3.42 64-bit edition of iTunes from
http://support.apple.com/downloads/
The problem is completely gone -
help ,me
Did you try anything suggested in the last thread you posted?
Views
Replies
Last Post
I uninstalled itunes for windows 7 and tried to install itunes 10.5 and it won't work. I deleted all existing apple programs from my computer but when I try to install again it says so long error involved with microsoft?I uninstalled itunes for windows 7 -
Hi All,
I am trying to install informatica 9.1 HF 2 connecting to 11g DB.
when installing Informatica, I am at the DOMAIN CREATION windows and inputting the DB connect details and for some reason, it cannot connect to the DB.
The DB is running
any ideas?
the error message states:
THE CONNECTION FAILED: CORRECT THE DATABASE INFO AND TEST THE CONNECTION AGAIN..any help please
thanksYup, that did it.
I actually had been made aware of the patch when I downloaded CF, but for some reason I thought it was difficult to install (I thought that you could only use the installer package if you could open Administrator). IAC I downloaded the appropriate patch file, ran it and Administrator ran. There was something in the install notes about reconfiguring the websites and removing the IIS6 Management feature but I'm not going to fool with anything because right now at least CF is running.
Thanks. -
has anyone ever had their apple ipod disappear from the computer? Mine did when I tried to install a newer version on my pC (vista), yesterday. Now I can't even see any apple icons on the screen or any other reference to my ipod tunes. I have had them on the computer for more than 6-years, and have spent a sizeable sum with apple buying iTunes. Help!
One more note. All my music on my iPhone was erased when I clicked on "Transfer Music from iPhone". I mistook the "from" for "to". I want the music to go from the PC to the iPhone, not the other way around. I've sync'ed many times since the latest version of iTunes, so I know that doesn't work.
-
I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DOcarter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software. -
Thanks for nothing. I tryed to install the 8.1 Update. And it deleted all my fotos and data. thanks...
Nope....I know. i need to blame myself. it just asked me when i pluged the phone to my pc for the first time since looong...
so. its okay. i had a back up with some pictures and some contacts and all that.
the install process just got an issue so it stoped half way through and i could only completely start over.
i was mad. now its okay -
I've been deploying flash updates thru SCCM for a long time using the MSI. With this update, many computers updated successfully, but about 200+ of them failed. Each computer I have looked at has the message "Product: Adobe Flash Player 14 ActiveX -- The version of the Player that you are trying to install is lower than what is currently installed." in event viewer. Attempting a manual install of the MSI produces a similar interactive message. The current installed version is definitely older than the one I am attempting to install. I am only able to re-mediate by manually uninstalling, and then installing 14.0.0.176. I could script and deploy an uninstaller, but I would rather the bug with the MSI be fixed.
Dear María,
Finally, I have been able to reproduce the error, both in ActiveX and plugin installers updating from version 15.0.0.246.
Here you have the logs:
ACTIVEX
=== Verbose logging started: 18/12/2014 16:12:54 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (E0:1C) [16:12:54:137]: Resetting cached policy values
MSI (c) (E0:1C) [16:12:54:137]: Machine policy value 'Debug' is 0
MSI (c) (E0:1C) [16:12:54:137]: ******* RunEngine:
******* Product: install_flash_player_16_active_x.msi
******* Action:
******* CommandLine: **********
MSI (c) (E0:1C) [16:12:54:138]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (E0:1C) [16:12:54:138]: Grabbed execution mutex.
MSI (c) (E0:1C) [16:12:54:155]: Cloaking enabled.
MSI (c) (E0:1C) [16:12:54:155]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (E0:1C) [16:12:54:158]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:162]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_active_x.msi
MSI (s) (30:E4) [16:12:54:162]: Grabbed execution mutex.
MSI (s) (30:4C) [16:12:54:163]: Resetting cached policy values
MSI (s) (30:4C) [16:12:54:163]: Machine policy value 'Debug' is 0
MSI (s) (30:4C) [16:12:54:163]: ******* RunEngine:
******* Product: C:\WINDOWS\system32\install_flash_player_16_active_x.msi
******* Action:
******* CommandLine: **********
MSI (s) (30:4C) [16:12:54:163]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_active_x.msi 3: -2147287038
MSI (s) (30:4C) [16:12:54:164]: MainEngineThread is returning 2
MSI (s) (30:E4) [16:12:54:177]: User policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:E4) [16:12:54:178]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:E4) [16:12:54:178]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:E4) [16:12:54:178]: Restoring environment variables
MSI (c) (E0:1C) [16:12:54:188]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (E0:1C) [16:12:54:188]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:12:54 ===
PLUGIN
=== Verbose logging started: 18/12/2014 16:15:40 Build type: SHIP UNICODE 5.00.7601.00 Calling process: C:\WINDOWS\system32\msiexec.exe ===
MSI (c) (28:44) [16:15:40:364]: Resetting cached policy values
MSI (c) (28:44) [16:15:40:364]: Machine policy value 'Debug' is 0
MSI (c) (28:44) [16:15:40:364]: ******* RunEngine:
******* Product: install_flash_player_16_plugin.msi
******* Action:
******* CommandLine: **********
MSI (c) (28:44) [16:15:40:364]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (28:44) [16:15:40:364]: Grabbed execution mutex.
MSI (c) (28:44) [16:15:40:384]: Cloaking enabled.
MSI (c) (28:44) [16:15:40:384]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (28:44) [16:15:40:384]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:384]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_plugin.msi
MSI (s) (30:2C) [16:15:40:384]: Grabbed execution mutex.
MSI (s) (30:3C) [16:15:40:384]: Resetting cached policy values
MSI (s) (30:3C) [16:15:40:384]: Machine policy value 'Debug' is 0
MSI (s) (30:3C) [16:15:40:384]: ******* RunEngine:
******* Product: C:\WINDOWS\system32\install_flash_player_16_plugin.msi
******* Action:
******* CommandLine: **********
MSI (s) (30:3C) [16:15:40:384]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_plugin.msi 3: -2147287038
MSI (s) (30:3C) [16:15:40:384]: MainEngineThread is returning 2
MSI (s) (30:2C) [16:15:40:404]: User policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Machine policy value 'DisableRollback' is 0
MSI (s) (30:2C) [16:15:40:404]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (30:2C) [16:15:40:404]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (30:2C) [16:15:40:404]: Restoring environment variables
MSI (c) (28:44) [16:15:40:414]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (28:44) [16:15:40:414]: MainEngineThread is returning 2
=== Verbose logging stopped: 18/12/2014 16:15:40 === -
I have tried to install a new update of itunes and keep getting the same message:Service "apple mobile device"(apple mobile device)failed to start verify that you have sufficient privilages to start system services) also it has abort retry and ignore as choices below i have tried completley uninstalling itunes but not icloud and keep getting this message anyone know what this is or how i can fix it
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Tried to install a new game that I bought (Xiii) for my MBP. All system req have been met and exceeded, however when trying to install it I get an error message saying "You can’t open the application “XIII Install” because PowerPC applications are no longer supported."
I have since read online that the operating software Yosemite has got rid of PowerPC applications, meaning I can't install my new game.
Is there anything simple that I can do to get this game to work. I'll be gutted if not as I have opened the game therefore the shop will not give a full refund, I'm sure .
Regards
SimonA lot longer ago than that. PowerPC apps haven't been supported since Lion, 10.7.x.
You may have just purchased the game, but the developers obviously haven't kept up to date with the requirements for newer versions of the Mac OS.
You have three options, depending on how old your Mac is.
1) If it were ever able to boot directly to Snow Leopard, you could create a separate partition and install SL onto that partition. Make sure to turn on the option during the installation to install Rosetta. That is OS X's PPC emulator.
2) If your Mac is too new to install Snow Leopard, then you can purchase and install Snow Leopard Server within a VM, such as Parallels, VirtualBox, or Vmware.
3) Use a separate older Mac for running outdated software. -
I have received an error message when trying to install 13 new apps for Creative Cloud. It reads: "Error There was an error with this action. Try again later. 7b1f5f56-79b3-4a0d-8fd2-137b1a3e6b67" I don't know what to do.
AppTrial1 where are you seeing this error exactly? For information on how to install the Adobe Creative applications included with the Creative Cloud please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
-
I just purchased Adobe Photoshop Elements 13 for a Mac and trying to install. I am at the point to enter the serial number but it won't take letters. What do I do and where do I go for help?
If the code you are trying to enter has letters then you are not looking at a serial number. A serial number only contains numbers - 6 sets of 4 numbers.
Find your serial number quickly
You might be dealing with a redemption code. This is especially so if you purchased it from a store or the like.
Redemption Code Help
http://helpx.adobe.com/x-productkb/global/redemption-code-help.html -
The version of Adobe Flash Player ActiveX that you are trying to install is not the most current v
I'm installing Flash Player on my Windows 7 64-bit OS using IE 8 32-bit. The installation terminates and the log file contains the following. (Please note, this log file was in "C:\Windows\SysWOW64\Macromed\Flash"). Flash player (32-bit) has been working, but just currently quit working. Advise please.
Start Main Section - Date=13/05/2010 (Thursday)
Time=8:14:27
CreateDirectory: "C:\Windows\system32\Macromed\Flash" (1)
Call: 441
Safety Check
Call: 116
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll"
File: wrote 4096 to "C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll"
CheckAdminPermissions Name = Rich
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll"
File: skipped: "C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll" (overwriteflag=1)
CheckAdminPermissions Account Type = Admin
Jump: 148
Call: 148
Call: 74
GetWindowsVersion -
CheckSupportedPlatform - OS=
Call: 447
CheckFPPermissions
Call: 74
GetWindowsVersion -
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\fpinstall.dll"
File: wrote 8704 to "C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\fpinstall.dll"
ObjectExistsAndIsOwnedBySomeoneElse = 0
Jump: 490
MessageBox: 12582960,"The version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version.
Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version."
Delete: DeleteFile("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\fpinstall.dll")
Delete: DeleteFile("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\System.dll")
Delete: DeleteFile("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\UserInfo.dll")
RMDir: RemoveDirectory("C:\Users\Rich\AppData\Local\Temp\nsdB8C7.tmp\")That's a good question. I may have installed FP 10.1 Beta in many of the attempts to resolve the issue. I've scanned my registry for any reference to Flash and removed anything that remotely resembles Flash Player (of course backing up Registry first). I've run uninstall_flash_player.exe, which doesn't appear to do anything. I've checked logs and there's no reference to Flash Player being installed.
When I go to the link provided ( http://www.adobe.com/software/flash/about/) I get the messageThe version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version. Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version. and when I look at the log (install.log) I see an attempt to install Flash Player. Here's the most recent log file:
Start Main Section - Date=14/05/2010 (Friday)
Time=7:02:52
CreateDirectory: "C:\Windows\system32\Macromed\Flash" (1)
Call: 441
Safety Check
Call: 116
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll"
File: wrote 4096 to "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll"
CheckAdminPermissions Name = developer
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll"
File: skipped: "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll" (overwriteflag=1)
CheckAdminPermissions Account Type = Admin
Jump: 148
Call: 148
Call: 74
GetWindowsVersion -
CheckSupportedPlatform - OS=
Call: 447
CheckFPPermissions
Call: 74
GetWindowsVersion -
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\fpinstall.dll"
File: wrote 8704 to "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\fpinstall.dll"
ObjectExistsAndIsOwnedBySomeoneElse = 0
Jump: 490
MessageBox: 12582960,"The version of Adobe® Flash® Player ActiveX that you are trying to install is not the most current version.
Please visit http://www.adobe.com/go/getflashplayer to obtain the latest, most secure version."
Call: 1191
File: overwriteflag=1, allowskipfilesflag=2, name="C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\NSISArray.dll"
File: wrote 17920 to "C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\NSISArray.dll"
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\fpinstall.dll")
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\NSISArray.dll")
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\System.dll")
Delete: DeleteFile("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\UserInfo.dll")
RMDir: RemoveDirectory("C:\Users\DEVELO~1\AppData\Local\Temp\nspDCDD.tmp\")
Maybe you are looking for
-
How to input data from labview to executable application and export the results back to labview
I have a simple function written in m file under Matlab enviornment, function [c]=myadd2(a,b) c=a+b; I built it into a executable file (.exe), then I want to call it in labview and get the results. I followed this tutorial and some other information
-
Motion assistant: Cannot convert to LabView file
Hello, I would like to ask for help on problem: the file generation from Motion assistant to Labview Background: 1. Use Motion assistant to generate 2 or 3 steps of motion. 2. Save it. 3. Inside Motion assistant, Use Tools>>Generate Code>>LabView
-
I recently published a site to mac and it is working fine on my computer when i view it. However, when i try to load my site on other computers, it takes 20-30 seconds to load. We have already gone in and downsized all of our pictures. they are on th
-
Genclntst fail in oracle10g RAC environment
After installation of oracle 10gR2 RAC on two-node solaris10 environment ,we need to run $ORACLE_HOME/bin/genclntst to generate the Client Static Library(libclntst10.a) but it failed .We copy another successfully generated libclntst10.a file from a n
-
Imac clock needs to be set and bluetooth doesn't remember ethernet connection
My Imac is less than 2 years old. Upon startup, I am getting the error message "You computer's clock is set to a date before Jan 1, 2008. This may cause some applications to behave erratically." It also doesn't remember which ethernet connection i