For GR material Docc is not posted to backend
Hi,
I have a problem when try to do the GR. We have a PO for 2 line items. User has done the Invoice for these two line items for full Qun but with lesser amount than the PO. After that user have done confirmation for one line item. But this confirmation has not reflected in backend. But can see in SRM in Follow-on document tab. where the material document number (for backend) for this confirmation is not reflect in the follow-on document tab.
Now user is not able to do any other confirmation for 2nd line item or reverse the old one. Could any body inform me what exactly need to be done.
For your information we are using Classis scenario and we are doing the confirmation in SRM only.
Thanks,
Pijush
Pijush,
Since the confirmation is not reflected in the backend, but you are able to do the same in SRM, can you confirm if you have configured message type MBGMCR as outbound (from SRM to ECC) under partner profile in SRM and distributed the same?
Regards,
Nikhil
Similar Messages
-
Excise duty for some line item of material document is not posted
Dear CIN Exerts,
In my Scenario user is Posting Excise invoice for every GR (105) by J1IEX to generate Excise invoice.
In some Past cases, if there are more then one line item in a GR then Excise value for some material is not showing (May be that time user not Did J1ID (Excise rate maintenance ).
Now the problem is that we wants to post excise Duty for those material WRT material document for whom it was not posted.
Please let me know that how can we do so (excise posting against Material document) so that it get reflected (for those line items for which Excise deuty is not posted) in MIGO > Document Display> Excise items tab .
Regards,
AshutoshExcise posting is not recommended by sap for movements 103 or 105.
Refer or search for SAP notes with subject CIN Limited functionalities. -
Table for GL account which is not posted.
Hi,
Could any one help me out to find the table for fetching the GL information which is not Posted yet.
Thanks & Regards,
Sudheer.
Moderator message - Duplicate post locked
Edited by: Rob Burbank on May 12, 2009 12:35 PMIf you do not select the line item display in the master data, from FS10N you cannot go to drill down to see the line items.
Please make sure you have seeing the right account in FS10N and FBL3N
Please search the forum for RFSEPA01 program for differences between FS10N and FBL3N
Regards,
Ravi -
Report to check open reservations for production orders where GI not posted
Hi experts,
Can we get reservation details from any report/ table for production order where material has not been issued, report should also display the value of the reserved material.
I could not find desired details in RESB (it has price but not value) and MB25.
Thanks in advance, useful ansers will be rewarded.
Thnx
AnandHello Anand,
there is no report but you may use the production order info system with list "components" and create a layout contaning the issued quantity and/or the final issue indicator. With a correct sorting, the list should show all orders with non-issued components at the top.
Regards, Andreas -
Could you please help us for asset depreciation postings are not posted
HI
can any body help,
while creating asset acqistion date 22 january 2010 and Capitalized date is December 18 2009, but depriciation caliculating from acqisition date , where is the mistake happen we did not get , please guide me
thanks
RanamkaHi
we did custimization is correct as you said , multilevel level method Validity start is "from ordinary start data"
while creating asset using as01 we maitained depreciation start is 18.12.2009, but it is considering 22.01.2010 which is first acquisition date
as under stand , both dates calander year is different 2009,2010 and my fiscal year is calander year , so system automatically considering current fiscal year , becuase 2009 periods already closed
please let me know where was the mistake
thanks
Rananka -
Doing adjustment for FG material using MI10
Hi Guru's,
We just did our year end count SAP and also physical count.
We come to our knowledge that some of our FG materials still have physical stock but 0 already in SAP. (nothing).
Now were trying to adjust the stock in SAP and were trying to do that in MI10 transaction.
The problem is, the FG (finished good) material is handled by batches, and since no available open batches now for that material, we could not post it.
May i asked, are we going to create batches again for the qty? or we need to do the adjustment in different transaction.
Hoping for your positive feed backs.
Thank you in advance.
BR,
Tinathank you..
award given.. -
PS: WBS is not flowing for a Material, while creating delivery from Project
Hi,
While creating delivery from Project thro CNS0, WBS is not flowing for a Material in delivery, in turn WBS is not flowing in Billing document for same material, in turn not allowing to Post the Billing document to Accounting.
Error while releasing Billing to the Accounting: Accounting Entry is not generated. Error Message:Assign Condition type
YMRG in COPA.
Pls let me know, what can be the reason ?
Thanks.
Amit.Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul -
FI DOCUMENT NOT POSTED FOR 201 MOVEMENT
HI ALL,
In one of the my client having one issue for particular one material ,FI document not posted ,while issue the goods to shop floor 201 movement type & same document we cancelled ,but FI document posted. Same cancellation document again cancelled.
How do we post / Release the same 201 Movement type material documet to FI. Due this my valuation agaisnt GL is inconsistency in MB5L AND MB5B report. Could u please help.
Rgds
SumaManiHi,
the following things have to be concidered for your issue
1. FI Document is not generated if the price of material is ZERO
2. check whether during the movement type 261 the material price is ZERO or not
3. Check whether during the cancellation of that document the material price is changed some how?
i my opinion during the 261 for that material that material price was Zero and no FI Document was generated and during the cancellation of that document that material has got some price so the FI Document was generated
Best Regards,
Ravi Reddy, -
No stock posting for this material
I have create a material with item category LEIH for returnable packaging,while doing stock posting in MB1C error comes as "No Cmaterial posting for this material".plz help how to post the material.
Duplicated thread no stock posting for this material
Please close this post.
Regards. -
Monthly depreciation for areas that do not post
We have dpreciation areas for tax purposes that do not post to the GL. Is there any way to get SAP to store the monthly depreciation amounts so that we can extract it for other processing?
Hi,
Use standard report S_ALR_87012936-Dpeeciation Simulation.
Click on All Selections button on the appilication tool bar, then you will be able to see more fields for selection in the selection screen.
Choose Evaluation Period as Month (depends on this selection system will show the output fields for selection in the change layout option after getting output.)
Give your desired depreciation area.
Once you got the output, check whether dep amount is showing for each month or not, if not go to change layout and choose fileds like DEP 01-XXXX, DEP 02-XXXX, and DEP 03-XXXx and so on. (Need to choose 12 fields/ months)
This will resolve your purpose.
Thanks,
Srinu -
How can we change the valuation type for a material created.
How can we change the valuation type for a material created.
Note : All open orders are closed for this material.3
Please guideHi,
You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
- you are not allowed to have open transactional data
- no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
- in case of valuation category setting batch archiving may be necessary
BR
Csaba -
Material column is not displayed in ME21N in NEW ECC 6.0 - Urgent
Hi Gurus
I am working in Technical upgradation from 4.6 C to ECC 6.0
We got new system last week only, in the new system (6.0) in ME21N - the filed for entering material no is not coming.
Please suggest
Muthu kumarHi,
After upgradtion some of the screens will changed from older version to new version. This is not common for all clients. Some upgradtion will have like this impact.
The Material number is there on the ME21N transaction but may be in the different column check that correctly, but may not be on the same column as in 4.6 C but in different column may be middle or last.
Other wise check the configuration on the top right of Item overview there is button when you click that system will show the Table settings there check any new variants are created or not. If there modify that and save then activate.
rgds
Chidanand -
Urgent issue REPORT FOR ALL MATERIAL BASED ON STOC TYPE
Hi
I want report for based on stock type
i want to check the stock for all mterial with stock type "quality inspction"
i want that type of material documents
is it possible to see the report
regards sesidharI CREATE material A...with out seleting QM view
I create one more material B.... with select QM view
both r ROH material type..
when i caeate GR for material A. with stoc type 'QYALITY INSPECTION.. for this material system does not creat quality LOT....
when i create GR for material B with stock type 'QYALITY INSPECTION.... for this material system created lot..
but are GR done by 101 movement..
but i want report for materials which are stock type QI...but does not display Material which r lot created...?
is it possible..
regards
sesidhar -
Dear All
Do we have a standard report where I could get the report for document is parked but not posted plant wise not Company code wise.
Or if any other option do generate this report.
Regards
ManojDear Manoj,
If you assign workflow for diffrent users to complete invoice document , user automatically get the list of parked invoice in his mail box which can help you to find out the parked invoices but not posted.
If found useful reward point.
Vivek Maitra -
Create Quality Management view for a Material in background mode
I want to know if there is a way to create a Quality Management View (Quality Management tab) on Material Master (material already extended to plant ) in background mode.
The requirement is to add inspection setup data for a material extended to a particular plant in background. I tried using 'BAPI_MATINSPCTRL_SAVEREPLICA' to add the data and it works perfect as required. Now the problem is this BAPI is creating the inspection setup data only for the material which has QM tab in MM02 for e.g. I manually created the inspection setup for a Material from MM01 and then deleted it , now the BAPI works fine for this material because when I created an inspection setup from MM01 it created the QM tab and after i deleted the entry the tab was still there with no entry in inspection setup.
I want to create inspection setup for a material which does not have QM tab.
I have to create everything is background mode. BDC is one option which I am list interested in.
Thank you for helping in advance.Thank you for looking into my issue. I have to do the inspection setup in background without using any front end transaction.
Maybe you are looking for
-
How to transfer the requirement from one plant to many plants(STO)
hai gurus, My scenario is as follows: 1) Plant "A" is Receiving plant. 2) Plant "B" ,Plant "C", Plant "D" is three production plant. 3) All the above 4 plant under same company code 1000. 4) Now plant "A" gets the requirements and pass on to all the
-
Can't playback ProRes422 with Mac OS X 10.5.5 and QT 7.5.5
I have a Quicktime file and the video track is ProRes422. When I try to play it I get audio only. I have Quicktime Pro so I opened the movie properties and I can see the video track but the "enabled" check box is not checked. The check box isn't gray
-
What is the use of control breaks in reoprts? and how can we use them?
hello all what is the use of control breaks in reoprts? and how can we use them in reports?
-
Need RFCs to call to update Position attributes....
Hi, We have a custom ISR scenarios installed. We're trying to take these 3 changes 1) Update title of an Unoccupied Position 2) Update cost center of an Unoccupied Postion 3) Make an Unoccupied Position Vacant We're trying to identify RFCs we can
-
1 table of 10 million vs. 10 tables of 1 million
If you had a Parts table which had a column Part_Color. And there were 10 colors. And for every Color, there were about 1 million different records (ie. there are about 1 million different parts). Would anyone on this board consider breaking that tab