For Web_lansdale - No Phone Service - Internet and TV Work.

I hear you and wanted to reply but they closed the feature on your post....
Same problem here, mine is a repeat.  I wonder if they have some kind of central office structural failure affecting all of us (landline or fios)....
gudguy1 {edited for privacy}

Hi web_lansdale,
Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

  • No Phone Service - Internet and TV Work

    It's been 36 hours now and my FiOS Phone Service is still not working.  I called customer service more times than I can count and they haven't been able to do anything.  Nor have they called back when they promised to.  I finally got a tehcnician out here to make a service call.
    He was here for 4 1/2 hours.  The reason he was here for so long was because he had to wait for his service calls to his office to be answered.  He spent at least 3 hours on hold for his tech support.  He replaced all of the FiOS equipment in our house as instructed by the techs he was dealing with, and our phone still doesn't work.  He finally said there was no point in his staying here and left.
    I'm now on hold with tech support, again.  They've given me plenty of appologies, but no answers.
    I left Comcast a year ago because Verizon FiOS was cheaper and supposed to be superior.  It may be cheaper, but it is definitely not better.  In 7 years with Comcast, I never lost my phone service.  Not once.  When I left Comcast, the "Retention Specialist" said "You'll be back."  It looks like he was right.  I'm voiding the year I have left on my contract with Verizon for their failure to provide service and returning to Comcast as soon as they can get me connected.

    Hi web_lansdale,
    Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

  • Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!!

    Living in Japan and I'm an American who just signed up with Soft Bank the phone service here and spent a TON of money on an iPhone. I can't figure out how to connect my bank account at home to my app account so I can Skype my family. Please help!!!! I don't have a credit card nor do they gove debit cards to foreigners here, or at least it's really hard so I'm using my bank at home and still have a debit there. My phone number is 8 numbers plus the country code which is strange! Another thing is I was given a phone email that I was told to use for texting but I'm not sure how that works!! It's so frustrating too because no one speaks English here and I'm not very tech savvy. God bless you if you can help :)

    whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
    If you are in japan, you need to use the japan app store

  • I just hooked up Internet at my house today and I'm trying to connect to it on my IPhone and IPad but neither are connecting. My grandma's Android phone is connected and is working just fine. Why isn't any of my apple products working?

    I just hooked up Internet at my house today and I'm trying to connect to it on my IPhone and IPad but neither are connecting. My grandma's Android phone is connected and is working just fine. Why isn't any of my apple products working?

    Since you give no clue as to what make/model/version WiFi router you are using or how you have it configured it's hard to comment.
    Look here for some WiFi troubleshooting advice http://www.apple.com/support/ipad/wifi/.

  • Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?

    Can my husband and I use the same e-mail address/AppleID for our 2 phones, our iMac, and our Macbook?
    We share an e-mail account and would like to use the same e-mail address for both our phones, as well as our computers at home. Is this possible?
    We both have itunes and apple ID's of our own right now, but since getting married, we are deleting these e-mail accounts and sharing one. How can we make this work?

    You may use the same Apple ID for iTunes and App Store purchases, but using different iCloud Apple IDs is recommended.
    If you use the same iCloud account on your iPhones it will sync all of your contacts, reminders, and notes automatically and it could be a pain. I don't know exactly how you would want to have the iCloud accounts set up on the Macs, because I don't know exactly how you use them. (I am assuming you share?). But you can do whatever you like, you can even keep the same iCloud accounts, etc but you may want to disable the syncing of certain items, because reminders for ones phone popping up on the others automatically would probably get annoying, but that is just me.

  • What are Azure limitations for Websockets in Cloud Services (web and worker role)?

    A WebSocket Server should be built on Azure platform with OnPrem connections and have questions regarding limitations for Websockets in Azure Cloud Services - web and worker roles.
    Websockets can be configured for Web Sites and limitations are understood, but Azure Websites is not an option. 
    Nevertheless it is planned to run a web service (without UI - no web site) as a Cloud service which has secure websocket (WSS) connections to OnPrem machines. Websocket protocol is enabled for IIS8 on Cloud services web and worker roles. Azure Service Bus Relay
    is not an option.
    Questions:
    1) Are Websockets supported for Azure Cloud services web and worker roles? we assume yes
    2) What are potential limitations from Azure side to support concurrent Websocket connections? We are aware that CPU, memory etc are limitations, but are there additional limitations from MS Azure side? 
     

    Hi,
    As I know, azure cloud service web and worker role support Websockets, users can connect to the role via the special endpoint, if we use Azure cloud service, I think we can monitor the metrics such as CPU, memory, etc... and scale our cloud service via these
    metrics to keep the websockets working, refer to
    http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-scale/ for more information about how to scale a cloud service.
    Regards

  • In preferences- saved passwords for Chrome://weave (Mozilla Services password) and Mozilla Services Encription Passphrase) what are these and are they needed?

    In preferences- saved passwords for Chrome://weave (Mozilla Services password) and Mozilla Services Encription Passphrase) what are these and are they needed?

    They are only needed for firefox sync.

  • So I'm thinking about buying a Macbook pro with 512 gb harddrive and 8gb of ram. But I don't know whether to get a 2.4 ghz or 2.7 ghz processor? I mainly use my computer for a lot of music, internet, and other teenage things

    So I'm thinking about buying a Macbook pro with 512 gb harddrive and 8gb of ram. But I don't know whether to get a 2.4 ghz or 2.7 ghz processor? I mainly use my computer for a lot of music, internet, and other teenage things

    2.4ghz is plenty of processing, if it means you'll save money over the 2.7ghz. I'd have suggested 2.7 if you also do heavy video editing/rendering using FCP, etc... but the spec you have is plenty

  • HT1819 Since there is a new Itunes Version 11.0, I was wondering if there is any change of design specifications or sizes change for the podcast such as banners and art work cover.

    Since there is a new Itunes Version 11.0, I was wondering if there is any change of design specifications or sizes change for the podcast such as banners and art work cover.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Looking for some guidance on an Internet and Wan failover design

    Hey Everyone,
    I have a project that has been somewhat dropped my lap.  The person who was going to do the project has abruptly bowed out.  I'm stuck in a position where I can either find another contractor, or just do the work myself.  For sake of saving my company, and putting another notch in my belt, I think I'm just going to do it myself.  For background info, I am a CCIE Collaboration.  I have held a CCNA in route switch for several years, and have used it extensively.  I have done some pretty large networking projects.  But I've never done this particular aspect of route switch.  I'm hoping someone here can point me to a good location for reference materials or videos.
    Here is what I'm looking to do.  We have 30 branch offices, with 2 major data centers.  Both data centers have a 100mg internet, and a 50mg mpls connection.  Today our MPLS comes directly in to a Cisco 3945 router and then uplinks in to our datcenter on a 3750 stacked switch.  Our internet connection comes in to a HA pair of ASA 5510's and then also uplinks to our switches.  All of our branches come back to the datacenters over the MPLS for their internet services.  Today, all of our offices go to our west coast datacenter.  The only thing using our east coast datacenters internet is that office itself.  I want to achieve two goals:
    1) Make all internet connectivity load balance. If one site loses internet, all traffic routes to the other site.
    2) If the MPLS is lost, I want the datacenters to reroute traffic through a VPN tunnel between each other
    The way I understood it from the person who left the project is that I need to bring the internet connection and the MPLS in to a single router, or pair of clustered routers.  That router can then make the patch selection and handle the BGP with our carrier.
    Thank you all in advance.

    I acually have similar setup at home using a 2611 router and forwarding port ranges to multiple ips on the internal network and it works great! My issue is that I have one dynamic ip assigned by my ISP and eventually I will have to manually change the ip for each nat statement. I wanted to know if there is a way to point to the outside interface instead of using on ip address. I found out that you can use a static nat statment
    "ip nat inside source static tcp 10.0.0.2 22 interface fa0/0 22" instead of
    "ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable"
    but I cannot find how to point my route-map to the interface to fully resolve this dynamic ip change in the future. My config is listed below which works great if you have static ips assigned by your ISP!!! Though I would love some guidance on the dynamic issue if possible. Thanks
    ~Roman
    P.S. ip nat statements work like numbered access lists and have to be in order or it will not work. I found out the hard way!.
    interface fa0/0
    ip nat outside
    interface fa0/1
    ip nat inside
    interface s1/0
    ip nat inside
    ip nat inside source list 1 interface fa0/0 overload
    ip nat inside source static tcp 10.0.0.2 22 72.xxx.xxx.85 22 extendable
    ip nat inside source static 192.168.1.3 72.xxx.xxx.85 route-map DESKTOP extendable
    access-list 1 remark NAT OVERLOAD List
    access-list 1 permit 10.0.0.0 0.255.255.255
    access-list 1 permit 192.168.0.0 0.0.255.255
    access-list 1 permit 172.16.0.0 0.15.255.255
    access-list 100 remark Desktop computer port-forwarding
    access-list 100 permit tcp host 192.168.1.3 3389 any
    access-list 100 permit tcp host 192.168.1.3 28960 any
    access-list 100 permit udp host 192.168.1.3 range 28960 32000 any
    route-map DESKTOP permit 10
    match ip address 100

  • TS3274 Top left says "no service" but bars show Internet and email works. Why does it say no service as everything appears fine?

    At the top left it says No Servive but the bars indicating service are full. In settings it appears I am connected to the Internet. Email works. Everything seems ok. Why "No Service" in upper left?

    No service refers to no cellular service but you may be connected to a WiFi network.

  • After connecting Ooma phone service, my airport still works fine but yellow light constantly flashes. Should I be concerned?

    After connecting Ooma phone service, my airport works fine, but it constantly blinks yellow. Should I be concerned?

    You will get error messages in the airport utility..
    Please go to the utility and click on the red circle on the airport. It should have a number in it.. which will be the number of issues you have.. eg double NAT.
    If you previously had the Airport setup as main NAT in the network.. the ooma device just took over.. so you need to redo the setup of the airport to have a subsidiary role.
    If you don't understand  the issues list them for us.. but certainly adding the ooma is not going to go without effect.

  • Please help! i need to make multiple custom shaped frames for different videos in one scene and cant work out how!

    hi there!
    im really stuck on this and cant work it out i hope you guys can help! i have been trying to make a single shot or scene whatever you want to call it with multiple videos playing all at the same time in it but i want them all to have their own custom shape. i know that i can just put them together into one frame and play them at once but they are all the original rectangle shape they where filmed in and i could put a mask over each one to make it a circle but i want to make each one a custom shape for example if you where to make a face out of 4 videos and one was the shape of the main part of the face one was the eyes one for the hair and one for the mouth now i would have to make the shape of each video the right shape for the corresponding body part then place them on top of each other and then i would have a face made from looping videos. i cannot work out how to make the frames of each video a custom shape after searching tutorials please can someone help me with this it would be greatly appreciated as it is a collage project. thanks very much for your time in the matter Josh.

    ok thanks yea thats helped alot im new to this so thats why it seems basic to you but not me. i have tryed to find out through tutorials but could work it out. im now able to do this but i want to draw my mask free hand and it seems you can only place points with the pen tool? is this the only way to make the shape of my mask? or example in photoshop which i know well i can use a paint brush and paint any shape i want to make a mask but i cant see how to do that in after effects? any help on this would be greatly appreceated. thanks josh

  • Bug Report for files first opened in Bridge and then worked in Photoshop

    I encountered a problem with files first opened in Bridge and then worked in Photoshop as follows:
    1.  I opened a raw file in Bridge and then after corrections sent to Photoshop with no problem, however, after correcting and saving the file I then went back to the option of closing file and going to bridge.  It closes file and stays in Photoshop.  In order to get back to bridge I must either click on the bridge logo at bottom of screen or request to go to bridge.
    2.  I tested the same thing in CS-5 and it works like it is suppose to you click on close and go to bridge and it immediately takes you back to bridge. 
    3.  Unless this is a new feature or suppose to work this way then it is a bug.
    NancyZ

    Hi Curt
    Yes, I am talking about opening a file in bridge doing necessary corrections etc and then sending on to Photoshop.  Once I do necessary corretions and save in Photoshop my next step would be to select close and open in bridge which is a choice.  In previous Photoshops that I have used (CS4 and CS5) when you did this it would close the file and then immediately take you back to bridge.  Now under CS6  if you select close and go to bridge it closes the file but remains in Photoshop.  If bridge is not a choice when you select close and open in bridge why even have that as a choice?  Why not just select close and then click on bridge logo or Control Alt O or select go to bridge? 
    Nancy

  • HT1430 while travelling i had my ipone on airplane mode then after powering down for landing turn phone back on and now will not pick up service and wifi connections  what do i do to restart my phone

    my phone wil not pick up service or wifi.  while travellingI put it on airplane mode  then for landing i shut ff my phone.  after \i turned on phone  shut off airplane mode it ill search for signal but keepssaying no service.  the ohr travellers  am with all have ful servce with their i phones
    Help please

    how do i reset ths phne

Maybe you are looking for

  • Match Case in Find/Replace in TextEdit

    Before updating to Lion, when using the Find/Replace function in TextEdit, I could choose to select "Ignore Case", or I could leave that deselected in which case it would only Find & Replace instances which matched the case of the text I entered. Now

  • Date/Time type not getting determined in ODO

    When ODO is created, it's date/time type is not getting determined automatically. due to this, the route determination is not happening which is further creating problem in POSC setup. I have setup  date/time types at the path IMG>EWM>Goods Issue Pro

  • Skipping/interference while listening to itunes on PC

    Hi everyone, I'd appreciate some advice on this if possible. When listening to music on itunes there doesn't seem to be a problem until I go and do something else, even something as simple as looking through the itunes store. If I start using the int

  • New feature of BO XI

    Hi, i want to know the latest feature web intelligence and Analytic report that BO XI is providing in 2007 -2008 year. And i want to know from where (From which link) we can up grade these feature in our BO XI. pls reply soon..

  • How to keep location in a table persistent when switching between pages

    Hi - How would I keep my last location persistent in a table when switching between pages? If I am on cell X and switch to another page, when returning to the previous page, I return to the top of the table. This can be very annoying when trying to f