Force Date "Display Pattern"??

Greetings,
We are having troubles with the "Display Pattern" of Date fields.  The scenario is that we receive data in XML, apply it to the form, and then want it displayed in a specific format on the Form, but it doesn't work like it should.
For example,
1. Our XML contains dates in the format MM/DD/YYYY (e.g. 05/11/2010).
2. We want it displayed as MMMM D, YYYY (e.g. May 11, 2010)
So we set the "Display Pattern" of the "Date" field in LiveCycle, to equal date{MMMM D, YYYY}
But when we receive the data in the MM/DD/YYYY format from the XML, it still gets displayed on the Form as MM/DD/YYYY.
If we re-select the date on the form itself, the correct pattern is displayed.  But we need these to be correct when the data is applied, and this doesn't seem to work.
Suggestions?  Something we're missing?
Thanks in advance!!
GS

The Date Control expects data in the format YYYYMMDD.. But your XML is sending the data in MM/DD/YYYY, so you need to convert the input data to the required format. Then only the Display pattern can work.
Put the below code in the Initialize event of the Date control..
Language: FormCalc
$.rawValue = Ltrim(Rtrim($.rawValue));
$.rawValue
= Num2Date(Date2Num($.rawValue,"M/D/YYYY"), "YYYYMMDD");
Thanks
Srini

Similar Messages

  • How to dynamically assign Display Pattern using FormCalc in Adobe PDF Form

    I am using Adobe PDF Form Designer. I am trying to dynamically assign a display pattern like MM/DD/YYYY to the Field tab - Display Pattern property. May I know how to do that?
    I am using FormCalc scripting.

    hi,
    After placing the date field in layout from data view, u will get tabs like field,layout,border etc..
    In field tab under the edit pattern specify the pattern in which you want to display the date field.
    hope this works.
    Reward points if helpful.

  • What else must I do to force data entry other than making the field required in LC 9 Forms Designer?

    I am trying to make sure that fields are populated with data prior to moving to the next field, but it seems that simply making the field required is not sufficient.  What else must I do to enforce data entry within required fileds?
    Thank you,

    There are a variety of scripting techniques that can be used based upon the form requirements, UI aesthetics, designer preference,... The script below forces data entry into a text field object called 'tf1' but it is a dangerous practice and should be used carefully. You may find yourself in a infinite loop based upon the tab order. A safer pattern includes global field validation upon submit.
    // form1.page1.subform1.tf1::exit - (JavaScript, client)
    if (this.isNull) {
      xfa.host.messageBox("tf1 is a mandatory field.","Text Field 1 Error",0);
      xfa.host.setFocus("form1.page1.subform1.tf1");
    Steve

  • Problems with date validation pattern DD.MM.YYYY in Form Builder

    (I am using LiveCycle Designer 8.0.)
    My form uses an input date field which consistst of DD.MM.YYYY.
    Display pattern, edit pattern, validation pattern and date pattern has been set to DD.MM.YYYY.
    "Validation Pattern Message"-box has been set to checked.
    "Validation Script Message"-box is not checked.
    1. When I type:      313101
    the system converts the digits to the date 01.01.3131
    2. When I type:      3131
    the system converts the digits to the date 01.01.3131
    3. When I type:       31   
    I get an error message "Date is not valid."
    I need a form to throw an error message if the user doesn`t type the correct input
    DD.MM.YYYY.  (01.03.2009)
    Thanks in advance.
    Tor

    Does anyone have any input on this matter?
    Thanks in advance.
    Regards,
    Tor

  • LiveCycle Designer 7, Display Pattern not working

    With Adobe LiveCycle Designer version 7.1.2295.1.242059:
    I have a Form that has fields that the user fills out and an "Email Submit Button" where when the user clicks it, it submits the form via email that attaches a .xml file. When I receive the email, I noticed that all the "Date" fields data does not have the slashes in them unless the user specifically uses the pop-up calendar form to set the date value for each of these fields. If the user just types in the date as "02192007", the data does not get converted to "02/19/2007".
    I tried modifying the various Pattern properties of the date fields on the form, but that does not seem to fix the problem.
    Also, if I set the following "date{MM/DD/YYYY}|date{M/D/YYYY}" as my "Validation Pattern:" for my Date fields, and everytime I enter "2/19/2007", I keep getting my "Validation Pattern Message", indicating that the format is wrong. However, if I enter "02" as the month, it works fine; only single digit months fail.
    The other settings for this field that I have are:
    (Field Tab): Display Pattern: MM/DD/YYYY
    (Field Tab): Edit Pattern: MM/DD/YYYY
    What am I doing wrong and how can I insure that slashes will come across on the XML file when it is submitted even though I have set the pattern properties?

    Designer 8 doesn't help either.
    I have the same settings Shweta proposes - but the exported date format is still different.
    You can fill the date field via script (like the following) then the date format is allright. To me it looks like the designer's "date format" is simply a string and the designer doesn't care a bit about the display patterns.
    var today = new Date();
    var dayOfWeek = today.getDay();
    var month = today.getMonth()+1;
    var year = today.getFullYear();
    var day = today.getDate();
    this.rawValue = day + "." + month + "." + year;

  • Change display pattern at  run time

    I have a date/time field which has display pattern set as MM/DD/YYYY...
    During run time, if user clicks on a check box...the display should change to DD/MMM/YYYY...How can i do that?

    You can do this with a little bit of script on your check box's Click event (in FormCalc in this example):
    if ($ == 1) then
    DateTimeField1.format.picture = "DD/MMM/YYYY"
    else
    DateTimeField1.format.picture = "MM/DD/YYYY"
    endif
    The trick is to know that in XFA, what Designer refers to as the "Display" picture is the <format> node which contains a <picture> which, in turn, contains the "display" picture; or, the picture used to
    format the field's value for display purposes.
    I've attached a sample form which demonstrates this.
    Stefan
    Adobe Systems

  • Display pattern of numeric field in adobe reader ver 8 and 9.

    I have added a text field to my form and have set the following properties:
    Type: Numeric field
    Limit length to visible area: checked (so that it accepts upto 9 digits)
    display pattern: zzz9
    data pattern: zzz9
    data format: Integer
    When I type "123456789" in the field, adobe reader version 7 and 9 are adding commas to the number and are displaying it as "123,456,789" while adobe reader 8 displays it the way i want "123456789"
    Appreciate if someone can quickly provide some guidance here.

    The issue is that the pattern that you are applying from the field cannot be applied to your input so the default pattern for numeric fields is being applied (hence the 123,456,789). If you make sure that your numeric field is set for integer (Binding tab/Data Format). Then set the display pattern to num{zzzzzzzz9}. It will work.
    The default pattern is held in the XDP template. It is created based on your locale. If you click on the XML Source tab (between Preview and Master Pages - if it is not visible then you can make it visible on the View/XML Source menu)then do a serach ctrl-F for numberPattern you will see where it is defined in the template. If you modify this one then it will only be applied for this form. Any new forms will revert back to the old pattern.

  • Display pattern not working - add $ for a numeric/decimal field

    I've designed a form which has fields where I need to display currency(US) values.
    I've made the fields as numeric type. I've added the display pattern as num.currency{} and also tried with num{($z,zzz,zzz9.99)}. But nothing seems to be working.
    The amount value passed in the xml input is 7,002.978.
    The result that I'm getting now is $0.00
    When I changed the field to decimal type and added the same display pattern as above, the result that I get is BLANK:  $
    I need to format it such a way that it displays $7,002.99 in the form. There's no limit for the leading digits and the digits after decimal point should be 2. Is there a way to get this by changing the "PATTERNS" properties?
    Please let me know how I can get the pattern right.
    I'm using LC Designer ES2.

    Hi,
    By default it is not going to like the comma in your xml input, so you will need to change the data pattern.  Try using num{z,zz9.999}, which works for your example value.  With the comma it will treat the value as text and just display what it gets.
    If your display pattern is num.currency{} then you will get two decimal places, but that makes the value $7.002,98.  I'm not sure how you get $7.002,99 ... is that just a type-o?
    Regards
    Bruce

  • Forcing Dates

    I'm after an applescript that will allow me to force dates that fall on a weekend back to a weekday. For example we have a recurring event that happens on the 7th of every month, however if the 7th falls on a Saturday we need to force it to the previous Friday, and if the 7th falls on a Sunday we need to move it forward to the next Monday.
    Does anyone know how to do this or even if it is possible? We're using iCal 1.5.5 on Mac OS X 10.3.9.

    If you prefer the short answer: No. The longer answer is a good bit longer but gets you no further.
    It SHOULD be possible, but I don't think it is.
    Applescript won't do it for you. You may not be aware that setting up a recurring event puts only a single event in your calendar file. Every time iCal displays a window with a time frame it calculates which recurring events should be displayed, and displays them. If you modify one of the recurrences iCal makes a copy of the event with the changes and saves it as a detached recurrence. Applescript doesn't know how to make a detached recurrence. Indeed, Applescript has to start with the first occurrence and work forward, parsing the recurrence details, to find whether there is a recurrence in the current time frame. It can be done in simple cases. This is not a simple case.
    iCal's interface for setting recurrences does not allow you to set all the possibilities that it can handle. For example, you can't set a recurrence on the last day of the month, but if you have one, iCal will properly display it. The easiest way of "fooling" iCal for such things is to make a close approximation to what you want, drag it to the desktop, delete it in iCal, edit the desktop copy with TextEdit (or similar) to get the correct RRULE (recurrence rule) then drop the edited file back on to iCal.
    I think (and here I would welcome correction from an expert!) that editing the rule to
    RRULE:FREQ=MONTHLY;INTERVAL=1;BYDAY=MO,TU,WE,TH,FR;BYMONTHDAY=7,8,6;BYSETPOS=1
    should work, if iCal was fully compliant with the calendar specification - but there are certainly instances where iCal is not fully compliant, and either this is one of them, or I am not correctly interpreting the standard - or both!
    AK

  • Display pattern for DateTimeField ignored when setting value from script

    Hello,
    I have a DateTimeField with Data pattern date{DD.MM.YYYY} and Display pattern date{MMMM}, so it displays its default value "21.05.2011" as "May". Now I'm setting its value from the other field's initialize event:
    if (this.rawValue) {
        data.Subform_Footer2.DateTimeField1.rawValue = this.rawValue.match(/\d+\.\d+\.\d+/)[0];
    Assuming this.rawValue contains text "21.04.2011", the DateTimeField displays "21.04.2011" in preview instead of "April" as specified in Display pattern.

    Hi,
    To me it looks like you are passing a string to the date field, rather than a date.
    Instead of trying to abstract the month manually in the script, why not pass the whole date through "21.04.2011" and leave the display pattern display the month.
    Niall

  • Data display grid font selection

    Does anyone know how to change the font that's used on the "Data" tab when displaying the content of rows in a table?
    I'm trying to view chinese characters which are stored in UTF-8 unicode in the database. I have all the necessary fonts loaded on my machine and the correct NLS_LANG settings.
    I can see western characters, arabic, russian, greek OK in the data-grid, but not chinese or other far-eastern languages. Instead I see little squares instead of the symbols.
    I've checked for font setting in Tools -> Preferences but the only setting I can find is under the "Code Editor" section. This is set correctly (to Arial Unicode MS) and if I copy the "little squares" from the data grid and paste them into a code-edit tab I see the characters correctly displayed.
    So it seems that the "Font" setting for the code-edit tabs isn't used by the data-display tabs.
    Is there a way of making both code-editor window and data-display tab use the same font?

    i would create a standard report.
    i presume the air pressure and humidity are from one field? if not create a formula to display that.
    create groups
    1- a/p humidity field or formula
    2- time
    3- ref-measure- error
    not sure if they are the same field or different.
    you can then place your data in the groups (formulas calcs etc)
    then underlay the groups so they appear on the same line
    then draw boxes around them.
    hope this helps

  • Data display on remote cube

    Hi Guru's
    I've created a generic ds using fm for direct access.creating virtual cube and mapped accordingluy with ds.
    Now when I do test extract on ds per a single posting day then it takes few secords to pull through the data and the no. of records are 45 on dev box.But I do data display on remote cub and it takes long and throughing a timed out error.
    I dont have any routines on transformaions.
    What could be the problem?
    Nagesh.

    HI
    here's the code in FM
    Example: DataSource for table SFLIGHT
      TABLES: BKPF,BSEG.
    Auxiliary Selection criteria structure
      DATA: L_S_SELECT TYPE SRSC_S_SELECT.
    Maximum number of lines for DB table
      STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
    counter
              S_COUNTER_DATAPAKID LIKE SY-TABIX,
    Starting point for each data package
             READ_NEXT LIKE SY-TABIX,
    Total Number of Extracted Records
             NO_RECS LIKE SY-TABIX,
    Number read so far
             TEMP_CNTR(9) TYPE N.
    cursor
    S_CURSOR TYPE CURSOR.
    Select ranges
      RANGES: R_BLDAT FOR BKPF-BLDAT,
              R_BUDAT FOR BKPF-BUDAT,
              R_CPUDT FOR BKPF-CPUDT,
              R_BUKRS FOR BKPF-BUKRS,
              R_GJAHR FOR BKPF-GJAHR,
              R_BELNR FOR BKPF-BELNR.
      DATA: GT_T_DATA LIKE ZFI_GL_4 OCCURS 0 WITH HEADER LINE.
      DATA: GT_BKPF TYPE TABLE OF BKPF,
            GS_BKPF TYPE BKPF.
      DATA: COUNTER(9) TYPE N.
      DATA: LV_MONAT(3).
    Initialization mode (first call by SAPI) or data transfer mode
    (following calls) ?
      IF I_INITFLAG = SBIWA_C_FLAG_ON.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    Check DataSource validity
        CASE I_DSOURCE.
          WHEN 'ZFI_GL_4'.
          WHEN OTHERS.
            IF 1 = 2. MESSAGE E009(R3). ENDIF.
    this is a typical log call. Please write every error message like this
            LOG_WRITE 'E'                  "message type
                      'R3'                 "message class
                      '009'                "message number
                      I_DSOURCE   "message variable 1
                      ' '.                 "message variable 2
            RAISE ERROR_PASSED_TO_MESS_HANDLER.
        ENDCASE.
        APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
    Fill parameter buffer for data extraction calls
        S_S_IF-REQUNR    = I_REQUNR.
        S_S_IF-DSOURCE = I_DSOURCE.
        S_S_IF-MAXSIZE   = I_MAXSIZE.
    Fill field list table for an optimized select statement
    (in case that there is no 1:1 relation between InfoSource fields
    and database table fields this may be far from beeing trivial)
        APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
      ELSE.                 "Initialization mode or data extraction ?
    Data transfer: First Call      OPEN CURSOR + FETCH
                   Following Calls FETCH only
    First data package -> OPEN CURSOR
        IF S_COUNTER_DATAPAKID = 0.
    Fill range tables BW will only pass down simple selection criteria
    of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BLDAT'.
            MOVE-CORRESPONDING L_S_SELECT TO r_bldat.
            APPEND R_BLDAT.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
            APPEND R_BUDAT.
          ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CPUDT'.
            MOVE-CORRESPONDING L_S_SELECT TO R_CPUDT.
            APPEND R_CPUDT.
          ENDLOOP.
             LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
            APPEND R_BUKRS.
          ENDLOOP.
             LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
            MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
            APPEND R_GJAHR.
          ENDLOOP.
              LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BELNR'.
            MOVE-CORRESPONDING L_S_SELECT TO R_BELNR.
            APPEND R_BELNR.
          ENDLOOP.
    Determine number of database records to be read per FETCH statement
    from input parameter I_MAXSIZE. If there is a one to one relation
    between DataSource table lines and database entries, this is trivial.
    In other cases, it may be impossible and some estimated value has to
    be determined.
          SELECT * FROM BKPF INTO TABLE GT_BKPF WHERE BLDAT IN R_BLDAT
                                                  AND BUDAT IN R_BUDAT
                                                  AND CPUDT IN R_CPUDT
                                                  AND BUKRS IN R_BUKRS
                                                  AND GJAHR IN R_GJAHR
                                                  AND BELNR IN R_BELNR.
          LOOP AT GT_BKPF INTO GS_BKPF.
            SELECT * FROM BSEG WHERE BELNR = GS_BKPF-BELNR
                               AND   BUKRS = GS_BKPF-BUKRS
                               AND   GJAHR = GS_BKPF-GJAHR.
              MOVE-CORRESPONDING GS_BKPF TO GT_T_DATA.
              MOVE-CORRESPONDING BSEG TO GT_T_DATA.
              CLEAR LV_MONAT.
              CONCATENATE '0' GT_T_DATA-MONAT INTO LV_MONAT.
              CONCATENATE GT_T_DATA-GJAHR LV_MONAT INTO GT_T_DATA-FISCPER.
              CALL FUNCTION 'BWFIU_GET_DOCUMENT_ORIGIN'
                EXPORTING
                  I_AWTYP    = GT_T_DATA-AWTYP
                  I_AWKEY    = GT_T_DATA-AWKEY
                IMPORTING
                  E_REFBELNR = GT_T_DATA-AWREF
                  E_REFGJAHR = GT_T_DATA-AWGJA
                  E_REFBUKRS = GT_T_DATA-AWBUK
                  E_REFKOKRS = GT_T_DATA-AWKOK.
    Lcal currency calculations.
              IF GT_T_DATA-SHKZG EQ 'S'.
                GT_T_DATA-DMSOL = GT_T_DATA-DMBTR.
                GT_T_DATA-DMSHB = GT_T_DATA-DMBTR.
                GT_T_DATA-DMHAB = 0.
              ELSEIF GT_T_DATA-SHKZG EQ 'H'.
                GT_T_DATA-DMHAB = GT_T_DATA-DMBTR.
                GT_T_DATA-DMSHB = GT_T_DATA-DMBTR * -1.
                GT_T_DATA-DMSOL = 0.
              ENDIF.
    Foriegn Currency calculations.
              IF GT_T_DATA-SHKZG EQ 'S'.
                GT_T_DATA-WRSOL = GT_T_DATA-DMBTR.
                GT_T_DATA-WRSHB = GT_T_DATA-DMBTR.
                GT_T_DATA-WRHAB = 0.
              ELSEIF GT_T_DATA-SHKZG EQ 'H'.
                GT_T_DATA-WRHAB = GT_T_DATA-DMBTR.
                GT_T_DATA-WRSHB = GT_T_DATA-DMBTR * -1.
                GT_T_DATA-WRSOL = 0.
              ENDIF.
              APPEND GT_T_DATA.
            ENDSELECT.
          ENDLOOP.
          DESCRIBE TABLE GT_T_DATA LINES NO_RECS.
          READ_NEXT = 0.
          TEMP_CNTR = 0.
        ENDIF.                             "First data package ?
    Fetch records into interface table.
        IF ( READ_NEXT GT NO_RECS ) OR ( NO_RECS EQ 0 ).
          REFRESH GT_T_DATA.
          CLEAR:S_COUNTER_DATAPAKID, COUNTER, READ_NEXT, S_S_IF, NO_RECS.
          RAISE NO_MORE_DATA.
        ENDIF.
        COUNTER = 0.
        LOOP AT GT_T_DATA FROM READ_NEXT.
          COUNTER = COUNTER + 1.
          IF COUNTER GT S_S_IF-MAXSIZE.
            IF TEMP_CNTR EQ NO_RECS.
              CLEAR: S_COUNTER_DATAPAKID,COUNTER,READ_NEXT,S_S_IF,NO_RECS.
              RAISE NO_MORE_DATA.
            ELSE.
              READ_NEXT = READ_NEXT + COUNTER.
            ENDIF.
            EXIT.
          ENDIF.
          MOVE-CORRESPONDING GT_T_DATA TO E_T_DATA.
          APPEND E_T_DATA.
          TEMP_CNTR = TEMP_CNTR + 1.
          iF TEMP_CNTR GT NO_RECS.
            CLEAR GT_T_DATA.
            CLEAR: S_COUNTER_DATAPAKID, COUNTER,READ_NEXT, S_S_IF,NO_RECS.
            RAISE NO_MORE_DATA.
            EXIT.
          ENDIF.
        ENDLOOP.
        S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
      ENDIF.              "Initialization mode or data extraction ?
    ENDFUNCTION.
    If it's a code then why it's quick on rsa3?
    Nagesh.

  • Feature Request: Better dimensional meta data displayed

    Aside from every other problem with how Bridge lets the user display, sort and interact with meta data (aside from the actual metadata palette), it would be way more useful to have the Dimension meta data displayed under an image shown in 'real world' dimensions.
    For example: I'm looking at my 'final images' that have been converted to CMYK, and sized for delivery. At this point Pixel Dimensions are pretty useless. What I really want to do is quickly scan my images, seeing Inches (or CM) with a PPI. My clients never ask for pixel dimensions (unless we are talking about the web, which we aren't) - they ask for 8.76" x 5.34" at 266ppi. It would just be nice to use bridge to double check the image sizes before delivery.
    thks
    andy

    Thanks for you feedback. You wish has been granted (dimensions can now be displayed in pixels, inches or centimeters. Go to Preferences > Thumbnails to select which dimension to display below the thumbnail, or Preferences > Metadata to customize the metadata pane). Check out the free beta of Bridge CS3 (http://labs.adobe.com/technologies/photoshopcs3/)
    Cheers,
    Arno.
    Bridge Engineering Manager, Adobe.

  • How to fetch the data & display the data if fields got the same name in alv

    hi frnds, i need ur help.
    how to fetch the data & display the data if fields got the same name in alv grid format.
    thanks in advance,
    Regards,
    mahesh
    9321043028

    Refer the url :
    http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
    Go thru the guide for OOPs based ALV.
    Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
    CALL METHOD grid->set_table_for_first_display
     EXPORTING
    I_STRUCTURE_NAME = 'SFLIGHT'     “Structure data
    CHANGING
    IT_OUTTAB = gt_sflight.          “ Output table
    You can also implement
    Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY. 
    For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
    1. Selection of data.
    2. Prepare Layout of display list.
    3. Event handling.
    4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
    Regd,
    Vishal

  • IPhoto 6 - Date Display Bug?

    I've gone ahead and upgraded to iPhoto 6. Upon first launch, it asked to update the files which I did.
    The new file hierarchy issues aside (Original/Year/Roll drives me nuts), I've noticed that while the calendar shows the correct pictures of the day selected, the Roll name is generic ("Roll 567", etc.) and the date of the roll is not correct.
    For example, a roll taken on December 25, 2005 should have the date of 31/12/05 (or perhaps 12/31/05) but I'm seeing "12/05/05" and when I get info on a pic in that roll, the date taken is shown as "12/2005/2005".
    I've deleted the plist but not sure what else I can try.

    Figured out that the "corrupt" date display is due to custom format display settings for Date in the International preference pane. Set that back to standard and the photos are back to normal.

Maybe you are looking for

  • How to store, in an effective way, analyzer data into a relational database?

    We want to store the "sweep traces" of a network analyzer in a relational database in a way that it saves as much as possible space without loosing resolution. The solutions were we thinking on are to separate the x-axes information from the y-axes i

  • Please reply it is production issue and urgent

    In our demand planning implementation we are facing serious issue that the cvc are not there in the MPOS but they are visible in the planning books, we have created the these CVC manually and by mistake have not assigned the right charecter length fo

  • Storage unit

    Hi, im trying to use my ipod as an storage unit and i try to see if i was able to see the hidden files but i dont see them on my pc, i have os vista, hope that some one can help me with this issue

  • Hissing/buzzing in headphones

    Just recently, I've been noticing a buzz in my new Sennheiser HD 280 headphones when using them with my relatively new Macbook. The headphones work fine with my iPod and with other devices. The buzzing seemed to be pretty regular, so I timed it and i

  • HP Mini 110-3603tu PC Video Controller with Windows 7 Ultimate (64-bit) OS

    Good afternoon! Please with me with my video controller installer, IDT high definition Audio Codex and Web camera.  I shift from Windows 7 starter to Windows 7 Ultimate 64-bit OS but some of my drivers were not installed especially its video controll