Force password on system wakeup but not on display wakeup

Hi everybody,
is it possible to disable the necessary of a password when the display times out but force a password if the lid is closed and opened up again?
I've found the possibility to set a timeout for both of them coupled in Lion. But I want the system never to ask a password when the screen goes to sleep but always ask a password when the lid is closed and opened up again.
Thanks in advance for your help.

Ramonekalsaw
I just wanted to inform you that I went to my local Apple Store and the technical staff told me the keychain issue should to be looked at by them and to bring in iMac to figure out this issue. It should not be figured out by yourself as it could be a critical security problem.
Pashue

Similar Messages

  • My apple password keeps being reset, but not by me

    My i tunes password keeps being reset, but not by me,  please help

    If you have never shared your password with anyone then your account was hacked. NOT your iPhone, your Apple ID. If you use the same password for other accounts any of them could have been hacked, and your password obtained from that other account. If your password was simple it could have been hacked by brute force. If it is a word found in any dictionary especially. Or if there is anything personally identifiable about it (nickname, pets name, address, name of someone you know).
    The really important thing is to get it resolved QUICKLY with Apple Security, and to change all passwords that might have been stored in an iCloud backup of your phone.

  • Can't FaceTime anymore?  iPad states wifi connected and iPhone 4 states not connected?  I have wireless in my home? Not sure what happened.  Password works for iPad but not on phone?

    iPhone won't connect to wifi.  iPad is connected.  Password working on iPad but not on phone.  Can't upload software update of IOS 7.1 because phone not connecting to wifi?

    Connect iPhone to computer and open iTunes.  You will be prompted to update to iOS 7.0.  Keep your phone connected until the update is finished.

  • IPod shows up in system profiler but not in /dev and disk utility

    Hi,
    I have a Problem with my iPod. It works perfectly when I connect it to other macs.
    Though on my mac it appears only in the system profiler, but not in itunes, /dev or diskutilities. Other USB devices are working correctly.
    I already reseted my ipod but this doesn't solve the problem. Neither did the update of the iPod firmware.
    Does somebody know this Problem? What can I try to solve it?
    Thanks.
    About my iPod:
    It's an iPod Touch, system Profiler is telling:
    Version:          0.01
      Bus Power (mA):          500
      Speed:          Up to 480 Mb/sec
      Manufacturer:          Apple Inc.
      Product ID:          0x1293
      Serial Number:
      Vendor ID:          0x05ac  (Apple Computer, Inc.)
    iTunes says:
    serial number: 910952nua75j
    Running the system 4.2.1
    About my Mac:
    It's a MacBook Pro, 2,16 GHz Intel Core 2 Duo, running 10.4.11

    I'm pretty upset. It seems that the only solution to this problem is to buy some new mac products!
    I have Applications on my computer that will not work on a new system and I don't want to update my system + all expensive apps just because my ipod refuse to downgrade.
    I used to be a mac fan and I still like it, but this kind of "tricks" are unacceptable. I bought an ipod because I didn't want to spend time on fixing some stupid problems and now I already spent weeks trying to make my expensive ipod work on my mac (and all this because of a stupid firmware problem). I am now really disapointed.
    So if anyone should have an idea on if it's possible to downgrade my ipod (or other solution?) in order to make it work again with my system, please post it here. Thanks.

  • Password works for login but not for the Adobe CC Desktop application

    Password works for login but not for the Adobe CC Desktop application

    Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    ou can try deleting OPM.DB from steps below and try again.
    Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
    Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder.  To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
    3) update to the latest version of the Creative Cloud app.
    Also we would like few more details:
    When has this issue started occurring, was this after installation of any specific adobe product.
    On which platform are you seeing this.
    Also we would like to know if after above steps this issue occurs ever again in future.
    You can refer to http://forums.adobe.com/thread/1239510
    Regards,
    Rajshree

  • I m using iPad mini, mistakly I clicked on restore factory now it require apple id and password which I inserted but not get success I really do not know any other apple id to restore its settings. I used .

    I m using iPad mini, mistakly I clicked on restore factory now it require apple id and password which I inserted but not get success I really do not know any other apple id to restore its settingsI used last time.
    < Personal Information Edited By Host >

    It sounds like this iPad was purchased second hand.  If so, you will need to contact the original owner, otherwise your iPad will remain Activation Locked.
    Find My iPhone Activation Lock - Apple Support

  • Spool Error - Spool created but not opening/displaying. Message no SP01R042

    Dear All,
    In the ECC Production System, for SD documents Spool is  created but not opening/displaying.
    Message no SP01R042
    When we check the short dump for the user,
    The dump is -
    - POSTING_ILLEGAL_STATEMENT
    - Statement "CALL SCREEN" is not allowed in this form.
    Please help. Perfect answers will be definitely rewarded.
    Thanks & Regards,
    Sameer

    Hi Sri,
    Try to setup the printer at OS LEVEL.
    then,
    If on Windows---use method C.
    if not,
    use method U and map to your printer queue at OS level.
    Hope this resloves this issue.
    Reward Pts if useful
    Regards,
    Malti

  • Unable to update apps since I have closed my Verizon e-mail account.  The old ID address pops up and I can not do updates.  I can not use the old password since the account is closed.  I have a new ID and password on my laptop but not for my I phone.

    My Verizon e-mail account is closed and I can not access the needed updates for my I phone apps.  Even if I knew the password I would have to access the old e-mail account which I can not do.  I have an ID and password for my new laptop but not for my I phone which is under a Verizon service contract....ugh!!!  Thanks

    kenfromsouth jordan wrote:
    My Verizon e-mail account is closed and I can not access the needed updates for my I phone apps.  Even if I knew the password I would have to access the old e-mail account which I can not do.
    You don't need to access the email account.
    Use the link provided by robdrage to update your old AppleID.

  • Audio input volume in System Preferences, but not Mainstage

    Hi,
    I am trying to get Mainstage 2 to work with an audio interface (TASCAM US-122 MKII). I've installed the drivers for the interface, and it shows up on my system both in System Preferences under Audio and in Mainstage. When I go to system preferences -> Audio and play an instrument through the interface, volume registers on the level meter. But if I go to Mainstage and select this interface as my input, I get no volume levels registering at the input.
    I've been trying to get this to work for going on six hours now, googling and installing and restarting to no avail. I have the same problem with Garageband too. Has anyone had this happen to them, that an audio interface seems to be recognized by the operating system but not by Mainstage/Garageband?
    Thanks,
    - Nick

    I can't help, other than to say this happened to me today with the same hardware, only with GarageBand.
    I recorded bass tracks this morning -- no problem. This afternoon, though, every time I plugged in the Tascam GarageBand went silent, even though the system input shows sound coming in.

  • Password protection 4 FF3 but not Safari?

    greetings.
    first, i was able to post my albums from iweb on the web using safari only and not FF3. The password protection was working for safari. Then i found a handy patch to allow iweb to work on FF3. Now, however, the password protection only works when i open in FF3 but not Safari. weird. Anyone have this problem or have any tips?
    cheers,
    pamurai

    Thanks Starman
    it also helped to uncheck the "Miscellaneous" option in he "MIME Types" box in preferences
    things are now working as they should

  • Hard Drive Shows Up In System Profile, But Not On Desktop

    I took the old hard drive out of my intel mac mini (60gb fuji) and installed it on my power mac g5 (1.8 single); it worked long enough for me to copy all my old files over before it randomly froze and i had to restart. after that the new drive only shows up in the system profiler and not on the desktop. in the system profiler it states its capacity but not how much is available, like the main drive. any ideas on how to get the old drive working again?

    figured it out, thanks!

  • Device shows up on System Profiler but not Disk Utility or Finder

    I have a Samsung P3 which up until now has worked perfectly; I plug it in, move files onto it, and then eject it.
    But a few days ago I was charging it on the mac and in the morning unplugged it in a hurry without ejecting. I don't know but this might be the cause of the problem.
    Basically I can't find the P3. The device itself says that it is connected, and it registers on System Profiler, but it is not on Finder or Disk Utility, and I can't move anything onto it or get to it at all.
    How do I solve this?
    I don't really want to download any software if that's ok.
    Thank you!

    NO such thing as a Buffalo HD, contains a Seagate HD inside the box.
    verify on another Mac if same, likely this very common issue, read about same here:
    SATA card failure:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD

  • I have an ipad with 8.1.1 software. I lost my thumbnails on my movies after one of the system updates but not sure which one since I don 't look at the movies that often.

    I have an ipad running 8.1.1. I lost all of my movie thumbnails after one of the system updates, but I'm not sure which one since I don't look at the movies that ofter.How do I restore my thumbnails. They are fine in itunes on my imac that I sync with.

    onix_76 wrote:
    how come? Documents also have on hand to buy as photo and check the box
    So what?  The second-hand shop you bought it from didn't follow the right procedures.  You also didn't follow the right procedures to make sure that iPhone was not in Activation Lock.  It's like buying a car for cash but not getting the title signed over to you.  It's not your car if you don' have the title.  And that's not legally your iPhone if the previous owner's Apple ID is still registered to the device for Find My iPhone/Activation Lock.
    Only a proof of purchase from the ORIGINAL retail store would do any good at all.  Return the device to where you bought it and demand your money back.  If they refuse, either get a lawyer and/or turn in the device to local police.  If you're in possession of stolen property, then the cops won't care about where you got it from.

  • WRITE STATEMENT IS GETTING EXECUTED BUT NOT GETTING DISPLAYED

    HII All,
    i hv created a selection screen with push button. Now when i m clicking that pushbutton, output is not getting displayed..when i debug program ,control enters in switch case and also executes write statement but write statement is not getting displayed.. below is the code ..
    SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
      SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002  USER-COMMAND FIR.
      SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003  USER-COMMAND SECOND.
    SELECTION-SCREEN END OF BLOCK INPUT.
           WA-EMP_NO = 123.      
            WA-EMP_CO = 'A'.
            WA-EMP_N = 'APOORV'.
            APPEND WA TO IT_TAB.
    AT SELECTION-SCREEN.
    CASE SY-UCOMM.
    WHEN 'FIR'.
    PERFORM SUB1.
    WHEN 'SECOND'.
            APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
            WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
            LOOP AT IT_TAB1 INTO WA1.
            WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
            ENDLOOP.
    ENDCASE.
    FORM SUB1.
    LOOP AT IT_TAB INTO WA.
              WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
    ENDLOOP.
    ENDFORM.
    Plz help me..
    Edited by: Julius Bussche on Jan 29, 2009 1:40 PM
    Code tags added and please dont use Caps-Lock.

    HI,
    SELECTION-SCREEN BEGIN OF BLOCK INPUT WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN PUSHBUTTON 10(20) TEXT-002 USER-COMMAND FIR.
    SELECTION-SCREEN PUSHBUTTON 35(20) TEXT-003 USER-COMMAND SECOND.
    SELECTION-SCREEN END OF BLOCK INPUT.
    WA-EMP_NO = 123.
    WA-EMP_CO = 'A'.
    WA-EMP_N = 'APOORV'.
    APPEND WA TO IT_TAB.
    * AT SELECTION-SCREEN.                 "Comment this
    START-OF_SELECTION.                     " Add this
    CASE SY-UCOMM.
    WHEN 'FIR'.
    PERFORM SUB1.
    WHEN 'SECOND'.
    APPEND LINES OF IT_TAB FROM 2 TO 3 TO IT_TAB1.
    WRITE:/ 'SECOND INTERNAL TABLE CONTENTS'.
    LOOP AT IT_TAB1 INTO WA1.
    WRITE:/15 SY-TABIX, WA1-EMP_NO NO-ZERO, WA1-EMP_CO, WA1-EMP_N.
    ENDLOOP.
    ENDCASE.
    FORM SUB1.
    LOOP AT IT_TAB INTO WA.
    WRITE:/ SY-TABIX, WA-EMP_NO NO-ZERO, WA-EMP_CO, WA-EMP_N.
    ENDLOOP.
    ENDFORM.

  • Projects are seen in workspace but not getting displayed

    I have some Web dynpro, JEEE, Dictonary DCs and projects in workspace, but it is not getting displayed when I open NWDS.
    I have given the correct workspace path but still the Project explorer is blank
    Please help.
    (P.S. NWDS was shut down improperly.)

    Closing this thread

Maybe you are looking for