Forecasing report for sdmodule

Any body having forecasting report for sd module with following requiements pls send me.
Material number, - Mara - matnr
Material description, makt -maktx
Avg sales in last 3 months, vbrp-fkimg
expected stock, - mard-labst
minimum stock level - MARC - MINBE
stock in transit - MARC-TRAME
forecast.
above fields i required to show in output screen .
selection screen are MARC-WERKS
sy-datum.
any body have example report above required report pls forward me..

Dear Goutam
Through <b>FBL5N</b>, you have to select "<b>Cleared items</b>" with "from to date" and execute.
You will get a list which can then be downloaded as excel by selecting "List" on top left followed by "export" and "spreadsheet".
Thanks
G. Lakshmipathi

Similar Messages

Report for Qty Contract and Value Contract with PO release exceeding limits

Hi All,
Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
Thanks in advance!

hi Duke,
If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
So, there is no report for the same...
Hope it helps...
Regards
Priyanka.P

PS report for Actual and commitment Balance

Dear experts,
Is there any report in PS where i can see list of projects has actual balance and commitment balance?
Note: I want to see only the balance of actual cost ( which is not settled) and commitment balance (Open PO, PR etc..)
Regard
Vetrivelan

Hi,
For commitment- CJI5
actual - CJI3 with correct layout as per you requirement.
also try S_ALR_87013558 report & go to line item report for detail actuals(& you have to change the layout accordingly) & commitment.
hope this would help you...
regards,
SL

Simulair report for FBL5N and FBL1N for new general ledger on segment level

We are working with segments in new G/L ledger. We want to run a open item report where we can combine customers and vendors by segment. The vendors and customers are linked in the master data. In the "old" reports FBL5N and FBL1N you can do this but not by segment.I found the following report on segment level:
- S_PCO_36000218 - Receivables: Segment
- S_PCO_36000219 - Payables: Segment
What I'm missing is to run 1 report for Customers and vendors. What I'm missing to is that there are only some fields available on line item level. (I like to have invoice number, documentype,.......)
Is there a standard report for this in new genaral leger?
Is it possible to ad additional field to th list viewer.

What is this user license type? All financial transactions need professional license.
Thanks,
Gordon

How to create a report for open sales orde documents which are not invoiced

Hi Experts this is urgent,
+pls give the Logic for document flow+
My requirement is create a report for sales orders which are not invoiced using the following table.
VBAK : sales order header
VBAP : sales order item
VBFA : sales document flow
VBUK for processing status
KOMV for duties value and sales order value
LIKP : delivery not header
LIPS :delivery note item
For information : In the header level the processing Status is indicated in the table VBUK field LFSTK for one sales order number. A,B , C are the possible entries.
Case A : When a sales order is invoiced we can display information on the header status :
Overall status : Completed and display a invoice number in the document flow. When the items of the sales orders are invoiced the process status is the following : Overall status Completed
Delivery status Fully delivered
Case B : An open sales order not delivered and not invoiced will have overall status : Open on the header and item level and will not have subsequent documents.
Case C :
When the items for the sales order are delivered but not invoiced the status will be u201Cfully deliveredu201D
And the subsequent documents will be delivery notes and good issue if the delivery note is issued.
With regards
ravi
Edited by: ravik ravik on Jun 25, 2008 3:29 PM

Hello Ravi,
U neednot develop any report..
there is std report with txn V.02
or copy this and make necessary changes.
Reward, if helpful.
Rgds,
Raghu.

Aging report for Open Invoice

Hi All,
I need to develop an Aging report for open invoice, there is no indication for open invoice or close invoice since we are using customise DS and DS from third party system. only one key flag we have is clearing date. so kindly let me know how to write the logic for this requirement.. can I use Customer exit for this? I have an Idea to do like
first logic is
*If Clearing date = blank than invoice is = open (by using of this logic we can get all open invoice).
second logic
total number of invoice = current date - document date.
but I do not know how to implement this logic in BEx hnece kinnly advice me whether this logic can be work or suggest with different solution ples..
Regards,

hi,
You can check few default PO reports wid proper paramater in it
or
Can check table EKBE
or
Check PO history in the PO doc
Or
Check the ME80FN
Regards
Priyanka.P

Report for material with sloc,qty available, and production order

hi friends, i need advice on getting this report for material with qty and specific sloc with the corresponding Prodn order numbers. in mb51 i could get all these details except the prodn order no. could you advice me please?

to make sure you know how to do this.
In the material document list, hit "Ctrl+F8" on your keyboard.
A window will pop up. Click on the button position and look for "order" in the list of available fields. That should do it.
Rgds.

Report for Comparison of Material Qty

Hi All,
I need to Develop an Interactive report for Comparison of Material Qty. ordered through Purchase requisition, ordered material through PO and corresponding Material Receipt report.
Can Someone Give a brief description about this & fields tcode & tables regarding this report.A sample code would be much appreciated.
Thanks & regards,
Ravi S

To get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps.

Report for open process orders

Dear SAP experts,
As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
Is there any way to get the similar report for open process orders?
Many Thanks,
Lisa Yao

Is there any clues?

Report for open order and shipped qty summary

Dear Folks,
           Can any one please help me.
Report for open order summary Vs shipped quantity
what are the related programs to it.
throw some light on it.

>
arpita b wrote:
> Dear rohit
>
>     Iam asking about any report which compares or give details of open order vs shipped qty.
>
> Any sis report is available for this?
Hi Arpita,
There is no such sis report available. You will have to configure and create two seperate reports and do the comparison.
If you want, I will send you the list of all T.codes used to generate reports in SD.
Revert back to me if you need the same.
Regards,
Swapna D.

Report for stock statement

hi guy's,
   i am doing report for the stock statement .... my issue is in MB5B if i reverse some document it shows as it move's to issue QTY and my receipt is same but my closing stock is correct ...is there any std report avalible ....
thank's in advance

Use this code :
TABLES : MSEG,MKPF,MARA,MAKT,BEWART,MSLB,BSIM.
TYPE-POOLS : SLIS.
DATA : IT_FLDCAT TYPE SLIS_T_FIELDCAT_ALV,
       IT_LIST_HEADER TYPE SLIS_T_LISTHEADER,
       IT_EVENTS TYPE SLIS_T_EVENT,
       GS_LAYOUT TYPE SLIS_LAYOUT_ALV,
       WA_SORT TYPE SLIS_SORTINFO_ALV,
       IT_SORT TYPE SLIS_T_SORTINFO_ALV,
       REPID LIKE SY-REPID,
       FRM_DATE(10),TO_DATE(10),
       DISPTEXT(255),DISPTEXT2(255).
TYPES : BEGIN OF ST_OPBAL,
         MATNR LIKE MSEG-MATNR,
         MAKTX LIKE MAKT-MAKTX,
         BATCH LIKE MSEG-CHARG,
         BWART LIKE MSEG-BWART,
         MENGE LIKE MSEG-MENGE,
         ZEILE LIKE MSEG-ZEILE,
         WERKS LIKE MSEG-WERKS,
         SOBKZ LIKE MSEG-SOBKZ,
         BUDAT LIKE MKPF-BUDAT,
         SHKZG LIKE MSEG-SHKZG,
         DMBTR LIKE MSEG-DMBTR,
         MBLNR LIKE MSEG-MBLNR,
         LGORT LIKE MSEG-LGORT,
       END OF ST_OPBAL.
DATA : OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE,
       TMP_OPBAL TYPE ST_OPBAL OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF BAL_NOREF OCCURS 0,
          MATNR LIKE MARA-MATNR,
          SHKZG LIKE MSEG-SHKZG,
          DMBTR LIKE MSEG-DMBTR,
       END OF BAL_NOREF.
DATA : BEGIN OF OPBAL2 OCCURS 0,
         SNO(3)      TYPE N,
         MATNR       LIKE MSEG-MATNR,
         MAKTX       LIKE MAKT-MAKTX,
         OP_BAL      LIKE MSEG-MENGE,
         OP_STKVAL   LIKE MSEG-DMBTR,   "NEW
         REC         LIKE MSEG-MENGE,
         T_OPBAL_REC LIKE MSEG-MENGE,
         REC_STKVAL LIKE MSEG-DMBTR,   "NEW
         ISS         LIKE MSEG-MENGE,
         ISS_STKVAL LIKE MSEG-DMBTR,   "NEW
         SALES       LIKE MSEG-MENGE,
         T_ISS       LIKE MSEG-MENGE,
         CL_BAL      LIKE MSEG-MENGE,
         BATCH       LIKE MSEG-CHARG,
         SUBCON      LIKE MSEG-MENGE,
         CL_STKVAL   LIKE MSEG-DMBTR,
       END OF OPBAL2.
DATA SERNO(4) TYPE C.
DATA OPTOT TYPE P DECIMALS 3.
DATA RECTOT TYPE P DECIMALS 3.
DATA ISSTOT TYPE P DECIMALS 3.
DATA TOTALL TYPE P DECIMALS 3.
DATA FLG        TYPE N.
DATA FLAG       TYPE N.
DATA STOCKVAL        TYPE MSEG-DMBTR.
DATA REC_STOCKVAL    TYPE MSEG-DMBTR.
DATA ISS_STOCKVAL    TYPE MSEG-DMBTR.
DATA CL_STKVAL       TYPE MSEG-DMBTR.
SELECTION-SCREEN BEGIN OF BLOCK X WITH FRAME.
     SELECT-OPTIONS: P_MATNR FOR MSEG-MATNR,
                     P_MGRP FOR MARA-MATKL,
                     P_DATE FOR MKPF-BUDAT,
     P_PLANT FOR MSEG-WERKS DEFAULT 'NB01' OBLIGATORY NO INTERVALS
                                                NO-EXTENSION .
     SELECT-OPTIONS: P_STLOC FOR MSEG-LGORT NO INTERVALS NO-EXTENSION.
SELECTION-SCREEN END OF BLOCK X.
INITIALIZATION.
   REPID = SY-REPID.
   PERFORM FILL_FLDCAT USING IT_FLDCAT.
   PERFORM FILL_EVENTS USING IT_EVENTS.
   PERFORM FILL_LAYOUT USING GS_LAYOUT.
START-OF-SELECTION.
CONCATENATE P_DATE-LOW6(2) '.' P_DATE-LOW4(2) '.' P_DATE-LOW+0(4)
INTO FRM_DATE.
CONCATENATE P_DATE-HIGH6(2) '.' P_DATE-HIGH4(2) '.' P_DATE-HIGH+0(4)
INTO TO_DATE.
CONCATENATE TEXT-003 FRM_DATE' TO : ' TO_DATE INTO DISPTEXT.
CONCATENATE TEXT-004 P_PLANT-LOW ' Storage Location : ' P_STLOC-LOW
INTO DISPTEXT2.
PERFORM FILL_HEADER USING IT_LIST_HEADER.
SELECT A~MATNR
          F~MAKTX
          A~CHARG
          A~BWART
          A~MENGE
          A~ZEILE
          A~WERKS
          A~SOBKZ
          D~BUDAT
          A~SHKZG
          A~DMBTR
          A~MBLNR
          A~LGORT
          INTO TABLE OPBAL
   FROM MKPF AS D JOIN MSEG AS A
           ON DMBLNR = AMBLNR AND
              DMJAHR = AMJAHR
        JOIN MARA AS E
           ON EMATNR = AMATNR
        JOIN MAKT AS F
           ON FMATNR = AMATNR
   WHERE   A~MATNR IN P_MATNR
     AND   A~WERKS IN P_PLANT
     AND   A~KZBEW IN (' ','B')
     AND   E~MATKL IN P_MGRP
     AND   A~BWART NOT IN ('541','542','321','322','121')
     AND   A~KZVBR NOT IN ('A')
     AND   D~BUDAT LE P_DATE-HIGH.
LOOP AT OPBAL WHERE BWART EQ '544' AND LGORT EQ ''.
   TMP_OPBAL = OPBAL.
   APPEND TMP_OPBAL.
ENDLOOP.
DELETE OPBAL WHERE ( BWART EQ '309' AND DMBTR EQ 0 ).
DELETE OPBAL WHERE ( BWART NE '543' AND LGORT EQ '' ).
LOOP AT TMP_OPBAL.
   OPBAL = TMP_OPBAL.
   APPEND OPBAL.
ENDLOOP.
STOCKVAL = 0.
SORT OPBAL BY MATNR BATCH BUDAT.
LOOP AT OPBAL.
SELECT SINGLE LBLAB INTO MSLB-LBLAB FROM MSLB
                        WHERE MATNR = OPBAL-MATNR.
IF OPBAL-BUDAT LT P_DATE-LOW.
     IF OPBAL-SHKZG = 'H'.
        OPTOT = OPTOT - OPBAL-MENGE.
     ELSEIF OPBAL-SHKZG = 'S'.
        OPTOT = OPTOT + OPBAL-MENGE.
     ENDIF.
For the duration   II part *****************
ELSEIF OPBAL-BUDAT IN P_DATE.
     IF OPBAL-SHKZG = 'H'.
        ISSTOT      = ISSTOT + OPBAL-MENGE.
     ELSEIF OPBAL-SHKZG = 'S'.
        RECTOT = RECTOT + OPBAL-MENGE.
     ENDIF.
ENDIF.
AT END OF BATCH. " modified for chek
   READ TABLE OPBAL INDEX SY-TABIX.
   CLEAR BAL_NOREF. REFRESH BAL_NOREF.
   SELECT MATNR SHKZG SUM( DMBTR )
     INTO TABLE BAL_NOREF
     FROM BSIM
    WHERE BUDAT LT P_DATE-LOW AND
          MATNR EQ OPBAL-MATNR AND
          BWTAR EQ OPBAL-BATCH AND
          BWKEY IN P_PLANT     AND
          BLART IN ('RE','WE','WA','PR')
    GROUP BY MATNR SHKZG.
   LOOP AT BAL_NOREF.
      IF BAL_NOREF-SHKZG = 'H'.
         STOCKVAL = STOCKVAL - BAL_NOREF-DMBTR.
      ELSE.
         STOCKVAL = STOCKVAL + BAL_NOREF-DMBTR.
      ENDIF.
   ENDLOOP.
   CLEAR BAL_NOREF. REFRESH BAL_NOREF.
   SELECT MATNR SHKZG SUM( DMBTR )
     INTO TABLE BAL_NOREF
     FROM BSIM
    WHERE BUDAT IN P_DATE AND
          MATNR EQ OPBAL-MATNR AND
          BWTAR EQ OPBAL-BATCH AND
          BWKEY IN P_PLANT     AND
          BLART IN ('RE','WE','WA','PR')
    GROUP BY MATNR SHKZG.
   LOOP AT BAL_NOREF.
      IF BAL_NOREF-SHKZG = 'H'.
         ISS_STOCKVAL = ISS_STOCKVAL + BAL_NOREF-DMBTR.
      ELSE.
         REC_STOCKVAL = REC_STOCKVAL + BAL_NOREF-DMBTR.
      ENDIF.
   ENDLOOP.
   " MSLB-LBLAB (STOCK WITH SUBCONTRACTOR).
   CL_STKVAL       = STOCKVAL + REC_STOCKVAL - ISS_STOCKVAL.
   TOTALL = OPTOT + RECTOT - ISSTOT.
   IF OPTOT = '0'   AND RECTOT = '0' AND ISSTOT = '0'.
      FLG = 1.
   ENDIF.
   IF FLG = 1.
      CLEAR FLG.
   ELSE.
      SERNO = SERNO + 1.
      OPBAL2-SNO         = SERNO.
      OPBAL2-MATNR       = OPBAL-MATNR.
      OPBAL2-MAKTX       = OPBAL-MAKTX.
      OPBAL2-OP_BAL      = OPTOT.
      OPBAL2-REC         = RECTOT.
      OPBAL2-T_OPBAL_REC = OPTOT + RECTOT.
      OPBAL2-ISS         = ISSTOT.
      OPBAL2-T_ISS       = ISSTOT.
      OPBAL2-CL_BAL      = TOTALL.
      OPBAL2-BATCH       = OPBAL-BATCH.
      OPBAL2-SUBCON      = MSLB-LBLAB.
      OPBAL2-OP_STKVAL   = STOCKVAL.
      OPBAL2-ISS_STKVAL = ISS_STOCKVAL.
      OPBAL2-REC_STKVAL = REC_STOCKVAL.
      OPBAL2-CL_STKVAL   = CL_STKVAL.
      APPEND OPBAL2.
   ENDIF.
OPTOT = 0.
RECTOT = 0.
ISSTOT = 0.
STOCKVAL = 0.
ISS_STOCKVAL = 0.
REC_STOCKVAL = 0.
CL_STKVAL    = 0.
ENDAT.
ENDLOOP.
WA_SORT-SPOS = 1.
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM = REPID
      IT_FIELDCAT        = IT_FLDCAT
      IT_EVENTS          = IT_EVENTS
      IS_LAYOUT          = GS_LAYOUT
      IT_SORT            = IT_SORT
    TABLES
      T_OUTTAB           = OPBAL2.
FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
   PERFORM FILL_PARAM_FLDCAT USING 1 'SNo'          'SNO'       ' ' 'X'
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 2 'Material No.' 'MATNR'     ' ' 'X'
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 3 'Description' 'MAKTX'     ' ' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 4 'Op.Bal'      'OP_BAL'     'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 5 'Op.Stock Val' 'OP_STKVAL' 'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 6 'Receipts'     'REC'       'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 7 'Total'     'T_OPBAL_REC' 'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 8 'Rect.Val.' 'REC_STKVAL'   'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 9 'Issues'    'ISS'          'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 10 'Iss. Val.' 'ISS_STKVAL'   'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 11 'Cl. Bal.'     'CL_BAL'    'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 12 'Cl.Stock Val' 'CL_STKVAL' 'X' ' '
   'OPBAL2' P_FLDCAT.
   PERFORM FILL_PARAM_FLDCAT USING 13 'BATCH '       'BATCH'     ' ' ' '
   'OPBAL2' P_FLDCAT.
ENDFORM.
FORM FILL_PARAM_FLDCAT USING VALUE(P_COL) VALUE(P_TEXT) VALUE(P_FLDNAME)
                       VALUE(P_DOSUM) VALUE(P_NOZERO) VALUE(P_TABNAME)
                       PP_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
   DATA : WA_FLDCAT TYPE SLIS_FIELDCAT_ALV.
   CLEAR WA_FLDCAT.
     WA_FLDCAT-COL_POS   = P_COL.
     WA_FLDCAT-SELTEXT_M = P_TEXT.
     WA_FLDCAT-FIELDNAME = P_FLDNAME.
     WA_FLDCAT-TABNAME   = P_TABNAME.
     WA_FLDCAT-DO_SUM    = P_DOSUM.
     WA_FLDCAT-NO_ZERO   = P_NOZERO.
   APPEND WA_FLDCAT TO PP_FLDCAT.
ENDFORM.
FORM FILL_HEADER USING P_IT_LIST_HEADER TYPE SLIS_T_LISTHEADER.
DATA: LS_LINE TYPE SLIS_LISTHEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = TEXT-002.
APPEND LS_LINE TO P_IT_LIST_HEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = DISPTEXT.
APPEND LS_LINE TO P_IT_LIST_HEADER.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-INFO = DISPTEXT2.
APPEND LS_LINE TO P_IT_LIST_HEADER.
ENDFORM.
FORM FILL_EVENTS USING P_IT_EVENTS TYPE SLIS_T_EVENT.
   DATA LS_EVENT TYPE SLIS_ALV_EVENT.
   MOVE 'TOP_OF_PAGE' TO LS_EVENT-FORM.
   MOVE 'TOP_OF_PAGE' TO LS_EVENT-NAME.
   APPEND LS_EVENT TO P_IT_EVENTS.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
   EXPORTING
     IT_LIST_COMMENTARY       = IT_LIST_HEADER.
ENDFORM.
FORM FILL_LAYOUT USING P_GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
   P_GS_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
   P_GS_LAYOUT-ZEBRA             = 'X'.
   P_GS_LAYOUT-FLEXIBLE_KEY      = 'X'.
ENDFORM.
FOR TESTING PURPOSE.
*SORT OPBAL BY BUDAT.
*CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_CALLBACK_PROGRAM = REPID
     IT_FIELDCAT        = IT_FLDCAT
     IT_EVENTS          = IT_EVENTS
   TABLES
     T_OUTTAB           = OPBAL.
*FORM FILL_FLDCAT USING P_FLDCAT TYPE SLIS_T_FIELDCAT_ALV.
PERFORM FILL_PARAM_FLDCAT USING 1 'MBLNR'        'MBLNR'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 2 'CREDIT/DEBIT' 'SHKZG'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 3 'MOV.TYP.'     'BWART'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 4 'ST.LOC.'     'LGORT'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 5 'STOCK VAL'    'DMBTR'
'OPBAL' P_FLDCAT.
PERFORM FILL_PARAM_FLDCAT USING 6 'POS.DATE'     'BUDAT'
'OPBAL' P_FLDCAT.
*ENDFORM.

Report for vendor balances

Hello,
I need to run a query or transaction to find the vendor opening and closing balances at the beginning and end of the financial years. Is there any standard report that can provide both these amounts? or any transparent tables that hold them?
Thanks a lot!

Hi,
Go to SAP Menu >Accounting >Accounts Payable >Information System >Reports for Accounts Payable Accounting >Vendor Balances
Here you can find variety of reports for vendor.
Thanks,
Nirav

Report for pending shipments, PGI and Picking

Hi All,
We have few issues with the orders not being picked, if picked some are not being able to PGI and few are not going to the Shipments process. this is creating a backlog. I was wondering if we have any Report or transaction where i can check open shipments for the last 2 weeks or, open PGI which have been picked, or deliveries which need to be picked.
Does sap has any standard report for this. Please help me.

Hi,
The mentioned reports (VL06F & VL06T) can be accessed from VL06O:
VL06F - general delivery list / List of outbound deliveries
VL06T - outbound deliveries for transportation planning
Csaba

Report for Req Material and Issue Material for Project/WBS

Dear All,
My client need a report for a WBS element-wise material required and material issue with value.
Let me know if any standard report avialble for same??
Or Incase of devlopment which are the tables we can use to Get req qty and issue qty of materials?
Thanks and Regards,
Atul R. Rajmane

Dear Shirkant,
Thanks for your input. I am using CN52N report.
I this I have selected Req Qty, Qty Received, Qty Withdrawn, Shortfall Qty. I am getting figures in Req Qty, Qty Withdrawn, Shortfall Qty but I am not able to get Qty Received figure. Let me know how I can get it i.e. for this any Note is required or any other configuration??
If I can get this figure than I can use this report for requirement.
Thanks and Regards,
Atul R. Rajmane

Report for daily production and daily sales quantities

Can you Please any body let me know what fields and tables should I pick to generate a report for sales qty and production qty for a material on daily basis. we are using PP PI

Hi,
You can use table MSEG for that purpose. Try BUDAT-MKPF as one of the selection parameters and use
MBLNR-MKPF = MBLNR-MSEG
MJHAR-MKPF = MJHAR-MSEG
Sort the results in ERFMG-MSEG and ERFME-MSEG using
BWART-MSEG = 101 minus 102 (for production)
SOBKS-MSEG = E
BWART-MSEG = 601 minus 602 (for sales).
Above stuff might be useful to you for your development requirement provided you are having Sales Order specific production.
Thanks & Regards,
Abu Arbab A

Forecasing report for sdmodule

Similar Messages

Maybe you are looking for