Forefront TMG 2010 Error from management console
Hi,
I am having a problem connecting to a TMG 2010 array from an installation of TMG management console we are receiving the error 'Refresh Failed' 'Error 0x80070057' ' The Parameter is incorrect'.
The only article i can find on this error is this http://support.microsoft.com/kb/2591719 which doesn't seem to apply to our setup or this problem but I have applied Service pack 2 anyway but still get same error. The only other thing i can find is
a few people saying the management console needs to be at the same version as the TMG servers you are trying to connect to but I cannot see how this can be done as when I try to run the service pack on the machine with only the management console I get an
error as the full installation is not there.
Hi,
Firstly, have you found any related information in the event logs?
Nest, you can check the version of the TMG server from the TMG help menu, TMG system node or using Control Panel. For more detailed information, please refer to the link below:
How to Determine Which Version of TMG
Server 2010 Is Installed
In addition, what hotfix rollup or Server pack have you installed? Please refer to the recommended order below:
Forefront TMG 2010 Service Pack, Rollup, and
Version Number Reference
Best regards,
Susie
Similar Messages
-
Exchange 2010 Public Folders Cannot Change Permissions Errors from Management Console and Powershell
This problem does not affect new public folders, only old ones that have probably been on Exchange 2000/2003 servers in the past. Migrations I believe did go smoothly but now have errors.
Error Reported is:
Microsoft Exchange Error
The following error(s) occurred while saving changes:
Add-PublicFolderClientPermission
Failed
Error:
Failed to modify the MAPI.NET table property of the object "000000001A447390AA6611CD9BC800AA002FC45A030064004E9CC2F8DD46B5E1E4578DE6D8030000000278E90000" on server "FQDN.Server.Name". See inner exception for more information.
MapiExceptionNonCanonicalACL: Unable to modify table. (hr=0x80004005, ec=2409)
Diagnostic context:
Lid: 40487 EMSMDBMT.EcDoRpcExt2 called [length=218]
Lid: 56871 EMSMDBMT.EcDoRpcExt2 returned [ec=0x0][length=356][latency=0]
Lid: 23226 --- ROP Parse Start ---
Lid: 27962 ROP: ropModifyACL [64]
Lid: 17082 ROP Error: 0x969
Lid: 27745
Lid: 21921 StoreEc: 0x969
Lid: 27962 ROP: ropExtendedError [250]
Lid: 1494 ---- Remote Context Beg ----
Lid: 26426 ROP: ropModifyACL [64]
Lid: 22086
Lid: 27128
Lid: 27232 StoreEc: 0x8004010F
Lid: 27128
Lid: 27232 StoreEc: 0x8004010F
Lid: 22086
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x3D210102
Lid: 19149 Error: 0x0
Lid: 24509 Error: 0x0
Lid: 31229 Error: 0x0
Lid: 21970 StoreEc: 0x8004010F PropTag: 0x668F0040
Lid: 6671 StoreEc: 0x8004010F
Lid: 24976
Lid: 24952
Lid: 25472
Lid: 7972 StoreEc: 0x969
Lid: 26532
Lid: 4920 StoreEc: 0x969
Lid: 5119 StoreEc: 0x969
Lid: 5247 StoreEc: 0x969
Lid: 17916 StoreEc: 0x969
Lid: 4814 StoreEc: 0x969
Lid: 1750 ---- Remote Context End ----
Lid: 26849
Lid: 21817 ROP Failure: 0x969
Lid: 29150
Lid: 20446 StoreEc: 0x969
OK
From ExFolders we get error "Exception: Object Reference not set to an instance of an object"
Any thought on how to fix permissions, people who already had permission in the past can see and access them OK and all objects, but we cannot change/update or remove permissons
We alos receive similar error from the powershell.Hi,
Could
you please add a new public folder hierarchies with ADSIEdit as following setups.
For how to use ADSIEdit ,you can access:
http://technet.microsoft.com/en-us/library/cc773354(WS.10).aspx
1.Run ADSIEdit, right click Exchange Administrative Group under “Configuration \ services \ Microsoft
Exchange \ Organization name \ Administrative groups”.
2.Select New Object.
3.Select msExchPublicFolderTreeContainer for the class and click Next.
4.Enter the following for the value:
Folder Hierarchies, click Next.
5.Click Finish.
6.Create
Public Folder Tree Object.
7.Right click CN=Folder Hierarchies -> New Object.
8.Selected msExchPFTree for the class.
9.For the value we entered, "Public Folders" and clicked next.
10.Clicked on the "More Attributes" button, selected msExchPFTreeType .
11.Set the value
to 1.
Note: This is very important that this value is set
to a value of 1 as This tells Exchange that this is a MAPI Tree.
12.Click Ok and then finish.
13.We then went
to the properties of the newly created "Public Folders" Tree object in
ADSIEdit.
14.Copy the distinguished name value
to the clipboard and then click cancel.
15.Navigate
to the Storage group that contains the Public
Folder Store for this server and get properties of the server.
16.Locate the msExchOwningPFTree attribute and paste in the value that was copied
from the Public folders Distinguish name attribute.
17.Restart the Information Store Service.
18.Mounted and dismount the PF store.
19.Open Outlook with administrator,give full permission to default owner.
Hope it can help you! -
How to add HTTP Header Response X-Frame-Options:SAMEORIGIN from OWA published via Forefront TMG 2010 to stop Clickjacking. I have put the IIS setting X-Frame-Options:SAMEORIGIN on my Internal CAS Server. However as the OWA page is published through
Forefront TMG 2010, the iFrame tag is not blocked when the page is first opened. Only when you login with your credentials to the OWA page inside the frame and the page reaches IIS on the Internal CAS it gets blocked. I want to block it in the first
instance when it is opened from TMG.Hi,
Thank you for the post.
To modify the http header, please refer to this blog:
http://tmgblog.richardhicks.com/2009/03/27/using-the-isa-http-filter-to-modify-via-headers-and-prevent-information-disclosure/
Regards,
Nick Gu - MSFT -
Publishing Exchange 2013 Outlook Web App with Forefront TMG 2010
Hello guys,
I have published Exchange 2013 via TMG 2010 with pre-authentication. Since this is the first time I am doing it- I want to ask experts for the explanations:).
When I configure Active Sync on mobile, I just type the password and it's starts syncing after 20 sec.
When I use browser and trying to login using TMG logon screen, after I enter credentials (if they were not wrong), I get exchange 2013 logon screen ( because my password was checked by DC's).
I have customized TMG tamplate to Exchange 2013 tamplate, but it did not help- I have two logon screens.
Is it possible to configure TMG for showing only one logon screen ( without disabling pre-authentication) ? Does it work this way?
Did I miss something?Hi,
Please try to enable FBA for external and internal OWA 2010 users by the methods in the blog below.
There are several ways to accomplish this:
Have internal users pointed to the internal interface of the Forefront TMG and utilize the forms-based authentication logon page offered by Forefront TMG.
Deploy Forefront UAG instead of Forefront TMG. Forefront UAG allows you to have FBA enabled on both the Exchange 2010 Client Access Servers and on the Forefront UAG solution itself.
Publish Exchange 2010 to the Internet using Forefront TMG but do not configure pre-authentication. This way the users need to go through the Forefront TMG solution, but will authenticate directly against the Exchange 2010 Client Access servers.
Configure an additional OWA and ECP virtual directory on the Exchange 2010 Client Access Servers.
Reference:http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part1.html
Then check the blog
- Creating a custom Forefront TMG 2010 OWA FBA logon page
Note:
Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
FOREFRONT TMG 2010 CRITICAL ISSUES
Dear all,
I installed and configured the Microsoft Forefront TMG in my company's network. It's been done two weeks ago. Since then, everything is working fine and all intranet computers have worked well.
This is a two NIC server (LAN and WAN on the same machine) and WINDOWS SERVER 2008 R2 OS.
When I ran the Microsoft Forefront Best Practise Analyzer Tool, I got these two critical errors:
FIRST
"Connection to Update Source Failed"
This machine have been upgraded normally from Microsoft Update service, I really do not know the why about this issue.
SECOND
"The primary configuration storage server failed to respond on port 2172"
Thia second issue appears twice on the critical erros listed.
Can you guys help me on that?
Clemilson Correia IT SpecialistHi,
Thank you for your post
Port 2172 is used as the SSL control channel for authentication to the LDAP ADAM directory used by the Enterprise Management Service. Since you stated that these are part of a domain, this error is probably benign in that. So, with that said,
let’s look at that error and how to troubleshoot it.
1. Use ADSIEdit.MSC to troubleshoot.
2. For “Connection Point”, select the radio button for “Select or type a Distinguished Name or Naming Context:” In the text box, enter (without quotes): “cn=fpc2”.
3. For Computer, use “Select or type a domain or server: (Server|[:port]) and in the text box enter {name or IP address of the EMS server}:2171.
4. If the EMS server is able to be cot acted from the array node, then you will see a successful connect and be able to expand out the LDS tree.
If you are successful in this connection, then there is probably nothing to worry about. If you cannot, please let me know and we can go about looking at reasons why it is unable to connect.
http://social.technet.microsoft.com/Forums/forefront/en-US/f165648c-50da-485c-a77c-ac21089e08d4/tmgbpa
Additionally, you need to check the system requirement for BPA:
http://www.isaserver.org/articles-tutorials/configuration-general/Microsoft-Forefront-TMG-Best-Practice-Analyzer.html
Best Regards
Quan Gu -
DS XI3.2 SP1 - Problem when starting RFC server from management console
Hi,
We're using DataServices XI 3.2 SP1 FP1 on a windows 2008 server 64bits to load SAP BW. We have set up an external system in SAP BW called "DI_SOURCE" and then successfully created a RFC server interface (DI_SOURCE) within the management console.
When we try to start this RFC server from the management console, we immediately get the following error message : "An internal error occurred in: server.start()::rfc_bad_connection".
On the other hand, when we follow the "old method" (pre SP2) and start the RFC server from a command window, it works : we have "CONNECTION DI_SOURCE OK" in SAP BW.
Any ideas how to solve this ?
Thanks,
OlivierHi,
We have tried your suggestions above.
Instead of just crashing we now get an error from designer (before closing down). Seems as if our librfc32.dll has a problem.
We have verified that the librfc32.dll from the Data Services package is the only one on the server.
Problem signature:
Problem Event Name: BEX
Application Name: al_designer.exe
Application Version: 12.2.2.0
Application Timestamp: 4b99c5ef
Fault Module Name: LIBRFC32.DLL
Fault Module Version: 7100.3.144.6097
Fault Module Timestamp: 49bec8be
Exception Offset: 000179a4
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7600.2.0.0.272.7
Locale ID: 1030
Additional Information 1: 4b85
Additional Information 2: 4b85a4b06dde50b4e092d24f447efca0
Additional Information 3: 45fe
Additional Information 4: 45feda9db76a48384005c14dafbddc29
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt -
Security Permissions from Management Console Not Being Replicated on SQL Server Database
Hi Everyone,
We have been encountering issues with access to Reporting Services for most console users since we upgraded to SCCM 2012 R2. We have observed that since the R2 upgrade, security permissions
that are set in the console are not being replicated on the SQL database. Users/Groups that had access prior to the R2 upgrade are now only able to access Reports via the web interface. All new users/groups are not able to get access at all.
We are not sure what the problem could be and would appreciate any guidance.
We have tried the following without success:
Manually adding new users/groups to the database
Reinstalling the the Reporting Service point and Reporting Service, Removing all of the security groups from the console and from the database, and Adding the security groups back
to the console.
Our current environment:
SCCM 2012 R2
1 Site
Primary Site:
OS: Server 2008 R2
Roles: Site Server / Software Update Point / Management
Point
SQL Server
OS: Server 2008 R2
SQL Version: Microsoft SQL Server 2008 R2
Roles: Site Database Server / Reporting Services PointThanks for your feedback.
Permissions
We have two main types of users: Full Administrators and local departmental IT administrators. (Local IT Admins only have full control over their own departmental collections. They have Read/Add to All Systems.)
The only account that's currently able to run Reports from both the console and web is the admin account used to perform the R2 upgrade.
Full Administrator
Role: Full Administrator
Scope: All instances of the objects that are related to the assigned security roles.
Local Departmental Administrator
Role: Full Administrator & Read/Add
Scope: Main Departmental Collection (Full Admin) & All Systems, All Users, and All User Groups (Read/Add)
Report Service Execution
On the database, we have tried assigning the Report Service Execution Account to the built-in Network Service Account, Local Service Account, and to a separate AD role account.
Error Messages
Console: We are able to select reports from the Console however nothing appears when we click on Run.
Web: Generating Reports from the Web works for only the Full Administrators. Nothing appears for a Local Departmental Admin.
This is a partial output from srsrp.log:
Set configuration SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Check state SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Check server health. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Successfully created srsserver SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Reporting Services URL from Registry [http://132.205.120.154/ReportServer/ReportService2005.asmx] SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Reporting Services is running SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Retrieved datasource definition from the server. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
[SCM-SQL.concordia.ca] [CM_SCM] [ConfigMgr_SCM] [SCM-SQL.CONCORDIA.CA] SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
[MSSQLSERVER] [1] [] [CONCORDIA\SVC-SCM_REPORT] SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
[1] [0] SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Confirmed version [10.50.2811.0] for the Sql Srs Instance. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Retrieved datasource definition from the server. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Updating data source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} at ConfigMgr_SCM SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Loading localization resources from directory [E:\SMS_SRSRP\SrsResources.dll] SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Looking for 'English (United States)' resources SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Looking for 'English' resources SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Found resources for 'English' SMS_SRS_REPORTING_POINT 3/10/2015 2:28:05 PM 2588 (0x0A1C)
Confirmed the configuration of SRS role [ConfigMgr Report Users]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Confirmed the configuration of SRS role [ConfigMgr Report Administrators]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Confirmed the security policy for folder [/]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Confirmed the security policy for folder [/ConfigMgr_SCM]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Confirmed the security policy for folder [/ConfigMgr_SCM/Asset Intelligence]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C)
Error retrieving users - [The EXECUTE permission was denied on the object 'spGetReportUsers', database 'CM_SCM', schema 'SCCM_Rpt'.]. SMS_SRS_REPORTING_POINT 3/10/2015 2:28:06 PM 2588 (0x0A1C) -
Starting PI after install getting error in management console
Fresh install of PI 7.1
Starting from inside management console:
See syslog entry
FATAL Native layer fro Jco is too old guarantee correct behavior Found version 711.121 require 711.134.
I would have assumed that the install package would contain correct version for starting J2EE engine.
Any Ideas?
Downloaded newest version from SAPMARKET place but trying to find the directory to replace files ?
sapjco3.jar
Thanks
Edited by: FC7600 on Jun 24, 2011 1:31 AMHi Checkout this link ..
http://fuller.mit.edu/spring/jco_install.html
It might be helpful for you ..
Deepthi Kuchimanchi -
Logon to WebGUI from Management Console with wrong Ports
Hello SDN,
I install the new SAP Management Console on my workstation. It works perfectly exept logon to abap through WebGUI.
If I cklick on to <SAP Logon...> from the context menue of the ABAP instanz, I get a browser with an URL http://<host>:50000/sap/bc/gui/sap/its/webgui. That doesn't work because the Port of ICM is 8000.
How I can setup the right port?
Many Thanks in advance
VladimirHi,
many thanks for your answer, but something is not clear.
I call SAP MC with such URL http://server1:50013/sapmc/sapmc.html
The ABAP System that I want to logon is under the URL http://server2:8000/sap/bc/gui/sap/its/webgui reachable.
If I try to logon from SAP MC I get an URL http://server2:50000/sap/bc/gui/sap/its/webgui
ICM on server1
icm/server_port_0 is setup for HTTP 8000 on abap side(server2). This is ABAP only ERP 6.00 system
ICM on server2
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
icm/server_port_0 is setup for HTTP 80$$
The question is - what ICM use SAP MC in that case?
Where I schould maintene the ICM parameters?
Best regards
Vladimir -
Removing Exchange 2007 Server from Management Console List
Hello,
We have an organization with a single Exchange 2007 Server running in production. It is working fine.
However, we brought up another server (we'll call it the secondary server for purposes of this thread) and linked it into this organization several months ago. Our plans for this box changed and we have kept it powered off, unlicensed, and unused.
Now, when we manage our production server, the management console keeps complaining about how the secondary server is almost at the end of its trial period, needs licensed, etc.
Since we might or might not use the secondary server in the future, it is possible to "unlink" it (or set it dormant somehow) from the server list to stop the license warnings? Or is our only recourse to remove Exchange and take it down if we don't
intend to license it and bring it into production? Our hope is that it can wait in the wings until such time as we decide to user & license it.
What are the implications if we ignore the license warnings and continue not to use it? Will it impact management of the production server at all or just continue to annoy?
TIA, Tom W.
JTWHello,
"What are the implications if we ignore the license warnings and continue not to use it? Will it impact management of the production server at all or just continue to annoy?"
You should have all production servers licensed but after trial period expiration the server will have all Exchange capabilities and features. Also trial period expiration should not have any negative impact on your environment. The EMC will simply prompt
to license that server correctly.
"Our plans for this box changed and we have kept it powered off, unlicensed, and unused."
In my opinion it is bad idea to have Exchange server installed but powered off. Note that this server still resides as object in Active Directory and it may complicate any future modifications of your environment (migration to newer versions of Exchange
etc.). I think you should use this server to provide some kind of high availability (and provide proper license for it) or remove it completely.
Once again: trial expiration is not a problem from server's functionality perspective, Exchange server powered down - it can be a problem. -
RV042 behind Forefront TMG 2010 (SOLVED)
Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.
RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1)
Is there any way through static route to access the TMG internal network through RV042 pptp server ?Well after expecting experts views from so long, i took help from one of my senior where i had to make changes in NETWORK RULES of TMG by creating Internal to External & External to Internal rules for 5 PPTP ip addresses and it started working. This is how it helped.
Common troubleshooting steps :
1. Check the IP address of TMG if it is pinging through RV042 firmware.
2. If not pinging than create a policy to allow PING into internal network.
3. Do the STATIC ROUTING in RV042 by keeping the IP address as TMG internal ip & gateway as TMG wan static ip.
4. Ping to confirm if you are having access through the router to TMG using PING utility of RV042.
5. Once you are able to PING than , enable PPTP and connect from the remote side and PING the WAN static ip of TMG and any of the INTERNAL ip of TMG network.
6. If you are not able to ping TMG internal network by just STATIC ROUTING from RV042
7. Than you need to create two rules under NETWORK RULES of FOREFRONT (check this option in FOREFRONT management window) , first you need to create a range of PPTP ip addresses in SUBNET category of TMG and use these range of ip addresses in the rules we are going to create.
8. Create SOURCE (PPTP IP ADDRESS RANGE) to INTERNAL and INTERNAL to (PPTP IP ADDRESS RANGE)
9. That's it , i am sure you will be able to ping it from the remote and so does access the resources of TMG network.
Please if any one have any doubts, post it here. Ill be really glad to help. Thank you. -
Generate WSDL File from Management Console?
Hi,
I am trying to enable a batch job as a web service. So I registered the batch I want and I copied the whole file from the u201CView WSDLu201D button. Now I am trying to use axis1.1 to generate the code and am getting errors. Is this supposed to generate a fully working WSDL file?
The first error I get is
org.xml.sax.SAXException: Error: URI=file:/c:/axis/BO.wsdl Line=10: Undeclared prefix in name: "xsd:schema".
at org.apache.axis.utils.XMLUtils$ParserErrorHandler.error(XMLUtils.java:619)
at org.apache.crimson.parser.Parser2.error(Unknown Source)
at org.apache.crimson.parser.Parser2.processName(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.content(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.content(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:322)
at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:367)
at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:384)
at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
at java.lang.Thread.run(Unknown Source)
So I add
xmlns:xsd=http://www.w3.org/2001/XMLSchema
to my WSDL file. Then I get
org.xml.sax.SAXException: Error: URI=file:/c:/axis/BO.wsdl Line=1393: Undeclared prefix
at org.apache.axis.utils.XMLUtils$ParserErrorHandler.error(XMLUtils.java:619)
at org.apache.crimson.parser.Parser2.error(Unknown Source)
at org.apache.crimson.parser.Parser2.processName(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.content(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.content(Unknown Source)
at org.apache.crimson.parser.Parser2.maybeElement(Unknown Source)
at org.apache.crimson.parser.Parser2.parseInternal(Unknown Source)
at org.apache.crimson.parser.Parser2.parse(Unknown Source)
at org.apache.crimson.parser.XMLReaderImpl.parse(Unknown Source)
at org.apache.crimson.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:322)
at org.apache.axis.utils.XMLUtils.newDocument(XMLUtils.java:367)
at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:384)
at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
at java.lang.Thread.run(Unknown Source)
So I add
xmlns:soap=http://schemas.xmlsoap.org/wsdl/soap/
Now I am getting other errors
C:\axis>java -classpath C:\j2sdk1.4.2_18\lib\tools.jar;C:\axis\axis-1_1\lib\axis.jar;C:\axis\axis-1_1\lib\axis-ant.jar;C:\axis\axis-1_1\lib\commons-lo
gging.jar;C:\axis\axis-1_1\lib\commons-discovery.jar;C:\axis\axis-1_1\lib\saaj.jar;C:\axis\axis-1_1\lib\jaxrpc.jar;C:\axis\axis-1_1\lib\wsdl4j.jar;C:\
axis\axis-1_1\lib\log4j-1.2.8.jar org.apache.axis.wsdl.WSDL2Java -a c:\axis\BO.wsdl
WSDLException (at /definitions/message[1]/part): faultCode=INVALID_WSDL: Unable to determine namespace of 'di_Wait_Profiling_Task_Output:PF_Task_Response'.:
at com.ibm.wsdl.util.xml.DOMUtils.getQName(Unknown Source)
at com.ibm.wsdl.util.xml.DOMUtils.getQualifiedAttributeValue(Unknown Source)
at com.ibm.wsdl.xml.WSDLReaderImpl.parsePart(Unknown Source)
at com.ibm.wsdl.xml.WSDLReaderImpl.parseMessage(Unknown Source)
at com.ibm.wsdl.xml.WSDLReaderImpl.parseDefinitions(Unknown Source)
at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
at com.ibm.wsdl.xml.WSDLReaderImpl.readWSDL(Unknown Source)
at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:406)
at org.apache.axis.wsdl.symbolTable.SymbolTable.populate(SymbolTable.java:393)
at org.apache.axis.wsdl.gen.Parser$WSDLRunnable.run(Parser.java:245)
at java.lang.Thread.run(Unknown Source)
So I was curious if this was supposed to be the complete WSDL file?
Thanks in advanceI tried with 11.7.3.7, using the following command and using axis jar files that are bundled with DI
it did generate the java classes successfully
I don't think there is much difference between 11.7.3.5 and 11.7.3.7
java -classpath "C:\j2sdk1.4.2_18\lib\tools.jar;%LINK_DIR%\ext\lib\axis.jar;%LINK_DIR%\ext\lib\commons-logging.jar;%LINK_DIR%\ext\lib\commons-discovery.jar;%LINK_DIR%\ext\lib\saaj.jar;%LINK_DIR%\ext\lib\jaxrpc.jar;%LINK_DIR%\ext\lib\wsdl4j.jar;%LINK_DIR%\ext\lib\log4j-1.2.8.jar" org.apache.axis.wsdl.WSDL2Java -a c:\axis\BO.wsdl
let me know if its works for you, otherwise will check in 11.7.3.5
how are you using these classes ? for calling a Job published as web service, you could write a simple java client application and passing the SOAP request for calling the batch job -
Hi!
If I start Windows I am getting the mmc-popup-error "Would you like to send it to..".
I have heared about Microsoft patches.
<b>Can you give me the appropriate SAP-note for that or further information?</b>
I use Windows Enterprise Server 2003, 64 bit
Thank you very much.
regardsI had to reflect a while what you are talking about.
did you describe the situation that:
after starting windows and loging in you get a popup with a message that an application has crashed (I did currently not remember the right text).
you where asked what to do with this information (sending or not it to MS).
there is not general SAP Note on how to handle this, because it depends on the application crashing. Typically it makes no sence to send it to MS.
The general recommendation is: yes, configure Windows Update to at least inform you about patches and install at least the driver patches and security fixes on a regular basis (security fixes timely close to their release date).
If SAP applications are crashing: get the latest fixes from Service Market Place and install them.
regards
Peter -
Authentication Error from Room Console
Hey,
trying to add rooms and getting an "Authentication Error".
I understand there is no limit to the amount of rooms that could be made. Maybe its how we are naming them? room100 ?
Also, is there any recommended way to 'stress test' the site. I'm guessing we would only need to worry about our server and LCCS should scale as needed.
thanks.
...russNow its suddenly working fine..dont know what was wrong before..
Thanks for the answers.
With Regards,
Sarat -
Login error when publishing OWA 2010 through TMG 2010
Its configuration publish OWA 2010 with TMG 2010 but when logged through the internet must enter the correct net name: domain.com\administrator and password to login.
administrator login name or login [email protected] not login. And all the other mailbox account not login.
This is a picture of my configuration. You do know how to fix it help me okay. Thanks.Hi Xuan,
It depends on your selected authentication method.
I recommend you refer to the following article, it will give you some hints:
http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/enabling-forms-based-authentication-external-internal-owa-2010-users-exchange-2010-published-using-forefront-tmg-2010-part2.html
Please note: Since the website is not hosted by Microsoft, the link may change without
notice. Microsoft does not guarantee the accuracy of this information. And the
changes made in the above blog is not supported officially by Microsoft.
Best regards,
Niko Cheng
TechNet Community Support
Maybe you are looking for
-
How to install Mac OSX on New Hard Drive (No Disk)
I have a new Hard Drive that I just received and I'm looking to install it on my Early 2009 17 inch Macbook Pro. The problem is I dont have the original disk that came with my macbook. I do have a 2TB external HD so is there anyway I can back up Mave
-
Hi, I am with a 2 part asyncronous scenario as shown below: JMS -> XI -> receiver RFC : Sender RFC -> XI -> JMS. In the above case, I am calling the sender RFM within the Receiver RFM. when i execute the scenario. The first part runs successfully . A
-
Pressing F5 Deletes layers in PS Cc 14.1.1
There is a problem with photoshop cc 14.1 and it hasn't fixed on 14.1.1. when i press F5 for the brush panel it delete layers. starts when you have more then 1 layer. you have to fix this i'm pressing it alot while i'm working and it just deleting my
-
RSDU_EXEC_SQL Runtime Error
Hi Experts Via SE38 with program RSDU_EXEC_SQL I have been trying execute a simple SQL statement but keep getting a runtime error. The procedure I went through is: Clicked the button 'SQL Command' Entered a SQL statement in the new screen, e.g. "Sele
-
I tried to install BPEL process manager.I started j developer.I used the default Bpeladmin. I am shown " the login Failed ". Please help.