Foreign Currency Valuation Country specific

Hi All,
We had implemented with different Fiscal year for a country and had local ledger implemented for this company Code.
With Config and some development we are mapping VATDATE(Tax Reporting Date checked in company code config) in leading ledger to Local Ledger's Posting Date and vice-verse.
And now we want to run foreign currency revaluation (F.05) for local currency and for this we want to pull up documents and translations(currency exchange rate) based on VATDATE instead of posting date for this program SAPF100 as we were using VATDATE. Is there anyway we could do this. I am not very familiar with Valuation areas, could we use this?

Hi All,
I got the answer from SAP saying it need to be done only through development. There is no Configuration which can be done to take this effect.

Similar Messages

Accounting Principle role in Foreign Currency Valuation

Dear Frns,
Why do we create an Accounting Principle in Foreign Currency Valuation and assign the same to the Ledger Group.
Regards,
Venkata

Hi Venkata,
The Assignment of Accounting Principle to Ledger Group is to ensure that the system knows to which ledger group the valuation is to be done. Since we can valuate the foreign currency documents to ledger specific posting as well.
Say there is one ledger pertaining to Leading ledger 0L and another non leading ledger L1, where 0L is pertains to US GAAP and L1 pertains to IFRS. So based on requirement, during the execution of FAGL_FC_VAL, you specify valuation area which will post to those areas.
Hope this is clear.
Regards,
Rithin

Nonleading ledgers and foreign currency valuation

HI all,
we are in ecc 6.0 and using new gl.
Do you need to carry our foreign currency valuation in no leading ledgers as well
if you have any .and this non leading ledger is used as there is a company code in foreign
country.???
any inputs are welcome please.
Thanks,
Sai.

What is the need for parallel ledger in the new GL concept?
There are up to 4currencies available within the Leading Ledger:
Transaction currency
Company code/local currency
Up to two parallel reporting currencies as assigned in FI
The strategy with regard to the technical mapping of parallel financial reporting (parallel ledgers in general ledger, account solution, company code solution) is that the your requirements determine whether parallel general ledgers or the account solution is more appropriate with only one leading general ledger. There could significant disadvantages caused by the high proportion of manual postings.

Foreign currency valuation for GR/IR clearing account is repeatedly posting

While executing foreign currency valuation (program SAPF100) through T code F.05 the following fields are selected for the spotted rate valuation for currency type 10.
A)     Valuate G/L account open items
B)     Evaluate GR/IR account (GR/IR clearing account is selected)
C)     Valuate customer open items
After execution the valuation postings are repeated in GR/IR FC valuation Balance sheet adj account while the postings in other accounts occur only once.
GR/IR FC valuation Balance sheet adjustment account is configured in OB09 for GR/IR account for respective currency type and local currency.
What could be the reason for repeated postings in FC valuation account?

I think there is some issue with the process, normally vendor/customer reconciliation account or some liability assets related account which has impact due to foreign currency rate changes needs to be revaluated. I don't understand why you have set up foreign currency valuation for GR/IR account, these are intermediatory account which reflects in system between for example GR and IR.
I also think that you need more information on foreign currency valuation, basically it happens on a particular key date and gets reversed on key date + 1, because revaluation is only required on a key date for reporting purposes. on the next day it get reversed and actual loss or profit on foreign currency only gets booked on realization.
Hope this helps!!!
Murlidhar Khatri

Error while running the foreign currency valuation

hello frnds,
i got the following error while running the foreign currency valuation.
No accounting principle assigned to valuation area
Message No.fr894
Diagnosis
In customizing the valuation area is not assigned to an accounting principle. You can use the accounting principle to define the general ledgers in which posting takes place.
System Response
Error msg
Procedure
Assign the valuation area to an accounting principle.
Above is the error message, but I created valuation area and assigned it to an accounting principle.
Guide me with some inputs.
Regards,
Siva

Hi,
Please check the following path
IMG > Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers > Parallel Accounting > Assign Accounting Principle to Ledger Groups
Whether you have defined the Accounting Principles to Ledger Group?
Regards,
jigar

Error when using automatic clearing (F.13)with foreign currency valuation.

Hello all
below is our problem, please suggest us a solution
We are experiencing a problem when running the automatic clearing in SAP. Somehow, the system seems to clear (with no reason) open items created with the revaluation of foreign currency.
Let's say that we run the valuation of open items in foreign currency for December 31, and we run the program to post the reverse entry as of January 1 of the next year. As a result of this valuation, the system calculates a loss of 10 euros. Therefore, it posts a document with a debit entry of 10 into the Loss account, and a credit of 10 in to account where the valuation was carried out. This document has a posting date of December 31. The batch program also creates the reversing entry, this time a credit entry into the Loss account, and a debit into the original account.
If now, we try to run the automatic clearing (F,13) on December 31 for those accounts, the system will create (automatically) a document on December 31, similar to the reversing entry that the valuation created, clearing at the same time, the first document that the valuation originally created.
The final result then is that the valuation makes a posting, and we end up having two reversing entries. Does it make sense?
In our scenario in the system P70, for MX10, we have a foreign currency valuation run on December 31st, which posted the document numbers:
1) 5100004579/2008, for a total of 0 euros, and 240,483.17 MXN. Credit to account 11081108 Finavigate cash receipt bank collect.CMG MXN.Debit to account 18601000 Losses f.foreign curr.valuation on financial trans
2) In the same batch, the system also books a reversing entry (doc 5100000042/2009) with posting date 01.01.2009 with exactly the same opposite entries as in the previous document.
3) After this, we run the automatic clearing with posting date 31.12.2008, and now, the system creates automatically the document 5000003236/2008, which clear the original document, 5100004579.
The final result, as you can see, it's out of balance, there is an additional document that we need to reverse.
Thanks in advance
sujatha

To my knowledge you get do two things:
1. In F.13 transaction don't include both the GL accounts where the Dr. and Cr. posting from the valuation run have taken place. With this the system won't find the matching entry.
2. If you want to use all the GL accounts in F.13, then check the clearing procedure configuration and make suitable changes.
With the info provided, this is the only thing I can suggest.
Regards,
~Vishal.

Error while running foreign currency valuation program FAGL_FC_VAL

Hi
this is regarding foreign currency valuation in ECC6.0 with EHP4
i have done the revevent setting in spro and while execturing TC FAGL_FC_VAL agetting following error:-
Incorrect account determination: 1000 10 200010
Message no. FR257
in customization, i have assigned P&L and balance sheet account against above GL (OBA1 -> KDF).
any idea where i am wrong. Please reply.
regards
DD

Hello Devi,
This account managing with open item? Can you check G/L account master data?
If yes,
You should check your customizing OBA1 -> KDF. I think you filled currency and currency type on OBA1-KDF. If you don't have different P&L ve balance sheet adjustment account for each currency and currency type, you can pass initial for this field. ıf you use different balance sheet adj. account or P&L account for each item, you must assign write criteria.
For example your company code currency is USD and you have a customer reconcilation account which has EUR currency, you should assign EUR currency for this account on OBA1-KDF. Please check in FS00 for this account, exchange rate difference key must be empty if this account managing with open item.
Regards,
Burak

SD invoice can't be reversed due to foreign currency valuation

Hi,
I have an invoice which relates to an Sales order,it was posted in several months again(cross monthly closing). Now I want to reverse this invoice,but the system can't cancel the relevant FI document due to we have done the foreign currency evaluation at last month end.
The error message as:
===========================================================================
Reversal of document 0220v1 1100004518v2 2009v3 not possible in FI
Message no. F5A005
Diagnosis
Item &v4 in accounting document 0220 1100004518 2009
was valuated with an open item foreign currency valuation.
System Response
Document cannot be reversed.
===========================================================================
How can I accomplish this job?
Any input is appreciated.
Thanks,
Don

Hi Mike,
Reset the Foreign currency valuation run? I am not sure about your suggestion. Does it means that I just key in the "reversal posting date" and "reverse post.peried" and don't key in "Document date","Posting date" and "Posting period",it is right? And then how to check the document being reset or not? (Just check if there have the document or not,when test run.)
Or I need to select a reset valuation method?
Thanks,
Don

Foreign currency valuation differences for reconciliation accounts

Hi gurus,
we have run the transaction FAGL_FC_VAL - Foreign Currency Valuation (New), now i try to make a report summirazing valuatin differences of the open line items by customer, vendor and gl account. however i cannot found the tables which the valuation differences are recorded. ( i dont find the values in the table bsbw in any FI document)
the customizing is (tcode oba1)
Exchange Rate Dif.: Open Items/GL Acct:
for customers:
G/L account: 1201xxx
Bal.sheet adj.1: 1209xxx
loss: 65xxxxx
gain: 64xxxxx
can you help me?
thx.

Is there any way to keep track of FC valuation differences by customer basis?
i dont see how much FC differences occured for a spesific customer!

Foreign Currency Valuation Values Conversion

Hello SAP Experts!
We are migrating from 4.6B to 4.7 and we are working in the vendor, customer and G/L accounts open items conversion.
In the present system (4.6B) the users use transaction F.05 for foreign
currency valuation with the flag "Bal. sheet preparation valuatn" activated. This means, that the valuation difference is not reversed
but it is stores in the field BSEG-BDIFF of the affected open item.
Now we are trying to convert those foreign currency open items with a
batch input to transaction FB01. However, the fields BSEG-BDIFF do not appear in the dynpros and we could not find a way to make them optional to enter the value of previous revaluations.
We have thought of transaction F-05, but there is no way there to reference the revaluation that is being posted to the affected open item. T
If we do not enter this amount in that field we will have problems
after the go live to pay those items, as the "Bal. sheet adj. 1"
account balance will never be zero and the gain/loss accounts for exchange rate difference will be duplicated.
Do anyone know how can this be done?
Hope you can help me on this one.
Many thanks in advance.
Regards!
Noelia

Hi Dominic!!
Thanks a lot for your answer. Yes, they are separate systems
Let me see if I understand your suggestion:
1) I should do a manual posting through F-05 in our 4.6B system bringing the balance adjustment account and the exchange rate difference account to zero.
2) Transfer the balances to 4.7.
3) In the first closing period run the automatic foreign currency valuation
(through F-05) with the flag "Bal. sheet preparation valuatn" deactivated so that the system revaluates the open items from the time the open item is created to that moment.
is it like that?
Many thanks for your help again!
Best regards,
Noelia

Onlybalances on local currency - incorrect foreign currency valuation

Dear all,
I have the following problem:
My customer created some manual accounts and did tick the box for only balances in local currency. Now my customer wanted to do foreign currency valuation on these accounts. I told the customer to make balance zero on account, un-tick "local currency" on GL account master record. And then reverse the document wihich makes the balance zero. This worked fine. But now when the customer wants to do foreign currency valuation (on balances) only new postings after the GL account master data change will be taken into account for balance.
It must be possible to change this? So that balance in document currency and local currency is correct when comparing to for example line items in fbl3n.
Very gladful for any help!
BR Åsa

Thank you for the information. Just want to make this clear. I did the following. Acoount number is 166000.
1. Amount in document currency: balance 5000 PLN (debet)
Amount in local currency: 12000 SEK (debet)
2. Post a GL account document:
Credit 12 000 SEK account 166000
Debet 12000 SEK account 168000 (or any other account).
3. Un-tick only balances in local currency on GL account master data
4. Reverse the GL document created in step 2 above.
5. Test run foreign currency valuation on account 166000 does not show any postings (no balance in other currency).
Can you please help me with what to do exactly? (GL postings)
Thank you very much!
BR

Foreign Currency Valuation not posted to GL account

Hi,
While I run foreign currency valuation even tick on check box of Create Posting button under FAGL_FC_VAL it show me summary report and posting tab it show me properly Debit/Credit entry on last day of month and 1st of month it become reverse as usual. But while I go through respective GL account of "Forex Unrealised Profit" and " Foreign Exchange Adjustment" account in FBL3N it does not show me line ietms result after running foreign curreny valuation. It should show the result in respective GL accounts where line items are tick in each GL accounts and valuation method I use EVR(always valuate). Why it is happening ?
Best Regards,
Anindita

Hi,
After executing FAGL_FC_VAL, do you execute Batch Input Session in SM35. If no then
When you execute FAGL_FC_VAL you will find the field called Batch Input Session name where you have to give a name for e.g. FOREXVAL. Once you execute it then system creates Batch Input Session in SM35. So go to SM35 and select the session FOREXVAL and click on Process icon seen on the top and select Display errors only and press ok.
Regards,
Chintan Joshi.

Foreign currency valuation (new) for vendors and costumers open items

Dear friends,
Is there any option that when i run the foreign currency valuation program (fagl_fc_val) for vendors and costumers open line items not to generate the reverse posting? I have read in the sap library that the reverse posting is optional and the when you pay the invoice the system works the difference out between the valuation and the exchange rate of the payment, but i can not find it in customizing.
thanks in advance
marc

I also like to add that it is best to post reversal because normally the revaluation entry is posted on the last date of the month and the reversal entry is posted on the first day of the following month, which means that the following month will have a new entry on the last date independent of the entry made in the prior month.
The idea of posting the valuation entry is to value the customer and vendor open items which were posted (let us say 3 months ago in a foreign currency) with the latest exchange rate as of the end of the month. This way these payables and receivables stand corrected.
Is there any reason why you don't want to post the reversal entry?

Foreign currency valuation(f.05) reversal is not getting posted automatically.

Hi All,
i performed foreign currency valuation using F.05 with evaluation key date as 31/05/2014.
i checked the check boxes 'create postings' and 'reverse postings' for G/L account balance valuation and haven't entered any date for reversal 'posting date'.
evaluation postings got generated but reversal posting were not generated. i was under the impression that the reverse postings should be posted on the next day. but i can't see any reverse postings till now.
Kindly advise me on this.
Regards,
Sreeni.

HI ,
I believe becuase you did not enter any date that's why they did n't reverse automtcially . You need to enter to reverse.
now you can use f.80 mass reversal for all of them
Many Thanks

Report on Foreign currency valuation

Sub:How i can get report from FGCL_FC_VAL
Dear gurus,
Configuration of foreign currency valuation is done.Only thing is that how i can run said report.I mean what data i should put in said report,so that when i run FGCL_FC_VAL,the system will do automtic posting .
Pl advise.
Regards,
Sama

dear friend you have to give customer ,vendor and gl account in which trancasition are posted with other currency .
so this will clculate the differance on the date
I think once you run you will able to understand.
jain

Foreign Currency Valuation Country specific

Similar Messages

Maybe you are looking for