Foreign Exchange fluctuation rate is not showing in case of partial payment

Hi,
In case of foreign exchange collection from Customer through F-28 in partial payment "Exchange Rate Gain" or "Exchange Rate Loss" is not appearing in GL balance simulation or Customer balance report. Only in case of full payment from Customer then "Exchange Rate Gain" or "Exchange Rate Loss" is appearing in GL balance simulation. What is the reason ?
Regards,
Anindita

Hi
Even in the scenario described by you,
You can use both residual and partial payments
here is what would happen for partial /residual payment after you post the payment.
Partial payment
open items
Debit USD 500
Credit USD 200
No cleared items
Residual Payment
open items
Debit USD 300
cleared items
Debit USD 500
Credit USD 200
Credit USD 300
Regards
Sach!n

Similar Messages

  • Exchange rate calculation in case of partial payment.

    Dear All,
    I have a case in which I need to calculate Exchange rate fluctuation on partial payment.
    Example
    Exchange Rate
    01.04.2011   1USD = 40 INR
    10.04.2011   1USD = 45 INR 
    01.05.2011   1USD = 50 INR
    31.05.2011 1USD = 55 INR
    Invoice Date = 01.04.2011 (1USD = 40 INR)
    Purchase Ac Dr  100 USD
       To Vendor               100 USD
    Partial Payment on 10.04.2011 of 20 USD
    (10.04.2011   1USD = 45 INR  )
    Vendor Ac Dr  20 USD
        To Bank  Cr 20  USD
    Partial Payment on 01.05.2011 of 60 USD
    (10.04.2011   1USD = 50 INR  )
    Vendor Ac Dr  60 USD
        To Bank  Cr 60  USD
    On 31.05.2011 (Month end Revaluation FAGL_FG_VAL)
    (31.05.2011   1USD = 55 INR  )
    If we do the valuation you will find that system create Fluctuation on the basis of Rate maintain on 31.05.2011 .i.e 1 USD = 55 INR.
    Ideally system should generate fluctuation at the time of partial payment only so in that case fluctuation will be less. And this is as per accounting standard also.
    ( I know partial payment  is open item and system will not calculate exchange fluctuation in that case. But then this will be wrong practice.)
    (If I go for residual payment in that case system will clear full invoice amount then and there and create exchange rate fluctuation of full amount which is also wrong).
    Kindly Suggest
    Bittu

    Thanks Atif.
    It mean that we have to show excess loss in our report, which is not actual.
    SAP might be having some solution on this Issue as we cant show wrong B/S.
    This is not a correct practice ,  hope you agree with me.
    bittu

  • Foreign Exchange - Posting date - updation - Not Working Properly

    Hi Friends,
    At the time of posting the Purchase invoice in Transaction Code MIRO, the system is picking the Exchange rates form the table based on our posting date in the Invoice screen.
    System is not updating the exchange rate, if we change the Posting date just before posting.
    Example:
    Transaction code MIRO
    Posting date 21.01.2010; Exchange rate picked by system - 46.67 (USD and INR) Maintained in Table - 21.01.2010 - Rs.46.67
    before posting we are changing the posting date from 21.01.2010 to 22.01.2010
    Posting date 22.01.2010; Exchange rate picked by system - 46.67 (USD and INR) maintained in Tabl - 22.01.2010 - Rs.46.99
    To bring the correct exchange rate into effect, We are coming out of the Transaction code and Re-entering the correct posting date.
    Is there is any solution to make the system pick the exchage rate whenever we change the posting date?
    Thanks in advance friends and collegues

    Thanks for Quick reply
    I have a separte Exchange rate in PO (purchase Order) and I have not activated the fixed Exchage rate in the Purchase Order
    If I have activated the Fixed Exchange rate in Purchase order - then the system will not accept other Exchange rates in Transaction Code MIRO (booking LIV)
    I have not activated the Fixed Exchange rate in Purchase order (Please have a look at the Purchase Order - A check box for maintaining the Fixed Exchange rate through out the P2P Cycle.
    If the fixed exchange rate is notactivated in PO, the system will pick the Posting Date in the Transaction Code MIRO (LIV) for calculating the Exchange rate.
    Now my query is why the system is not changing the Exchange rate automatically when I change the Posting date in Transaction Code MIRO. Please also let me know what should be done from our side so that whenever I change the posting date in Transaction Code MIRO, the system should pick the Exchange Rate according to the Posting Date in Transaction Code MIRO.
    Thanks for showing Interest
    Thak you and Kindest Rgeards
    Srikaanth

  • Exchange OWA 2010 is not showing events on calendar correctly.

    I have Exchange 2010 setup on 2 servers running Windows 2008 R2 Standard.  Some users' OWA accounts, (mine included) are working just fine.  Other users, are showing just a blank gray box on the calendar.  Even if there are
    multiple events that day, there is just one blank gray box.  You can read the event in the reading pane on the side but you cannot edit it, or delete it.  Clicking on the box brings up the create new event pop-up box instead.  If I click
    on the monthly view, all the events are garbled up in the upper left hand corner of the calendar.  I am up to date on all of my security updates and this issue is intermittent between users.  Some users work fine, others don't. 
    I've tried Firefox, IE 11, and Google Chrome on the same computer and the same thing happens in all 3 where my account works just fine and this particular user's account does not.  I might also mention that our company uses a
    portal where users log into one form and are then rerouted to a page with several apps, OWA being one of them.  If I login to OWA using the default website address (it uses forms based authentication) everything works fine for every user. 
    This problem only occurs on certain users when using the single sign on through the portal.  Any help would be appreciated!  Thanks in advance!
     

    Hi ,
    Thank you for your question.
    By my understanding, if we logon OWA using default website address without any problems, it mean OWA on Exchange is fine. We could contact application developer for solution.
    If there are any questions regarding this issue, please be free to let me know. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • Third party DVCPROHD Frame Rate Converter not showing up in tools.

    How can I get a third party frame rate converter to appear in my FCP tools. I meet all system requirements... followed instructions. Not sure what is up. Any ideas?

    Yeah, I downloaded it from the site onto an older G5 with an ATI 9600 in it. I could never get it to work. It showed up in the menu but couldn't actually select it.
    Caleb

  • Default Cost center in Foreign Exchange fluctuation account

    Hi
    I am doing FB60 of 100$ (1$ = Rs.45). Cost center used at the time of FB60 is 1100 (i,e, engineering division) Now i am paying in full and clearing the same invoice. Exchange rate at the time of Payment is 1$ = Rs.47.
    Now the SAP is picking the cost center given in FB60 i.e. 1100 instead of cost center (i.e. 7500 - finance) defined by default in the cost element. Let me know why the system is picking cost center from FB60.

    HI,
    Is this issue solved?  If not try this thing. Remove the cost center assignment in the cost element, as you are assigning the profit center in OKB9. For a cost element if it is a revenue item profit center should be assigned, if it is a cost item cost center should be assigned.
    In your case, cost center is assigned in cost element and also profit center is assigned in OKB9.
    For one cost element we can not assign both cost center and profit center.
    Hope this should help you
    Thanks and Regards
    Om prakash RA
    Edited by: Om Prakash Arjuna on Nov 27, 2009 3:57 PM

  • IPhone 5 storage with iOS 8 fluctuating; video does not show in manage storage

    Hi, I'm about to go on a long trip and the iPhone's local storage keeps fluctuating, from the 500MB to the 0MB range. I upgraded to iOS 8 yesterday via iTunes and there were 2.7GB left of storage. I checked all apps and when going to the Video App, there is nothing there, every single video (movie, tv show, music clip) shows the cloud icon, so "swiping to the left to delete" is not available.
    But when going to the iTunes Store "purchased" section, there are 3 tv episodes ready to watch, with no cloud but a "WATCH" icon. So I'm thinking this is what caused the fill-up, even though I didn't download 3 episodes. There is no "swiping to the left to delete" within the iTunes purchased section. The episodes just sit there, ready to be watched, and when clicking on the icon, sure enough, the episode comes up.
    Going to Manage Storage, there is no visible video app. Yes, all apps are showing, there is no "show all apps" option available at the bottom.
    I can't sync with iTunes because those episodes are stored on another drive, so the sync is not even an option, I hadn't seen this show in ages. There are no pending downloads. The sync that happened after the upgrade didn't change, same playlists, same photos, same everything. The 3 episodes show a cloud in the Video App.
    Does anyone have a solution for this, deleting the unwanted, "invisible" tv episodes? Thanks in advance.

    If the movie clip is there, but no thumbnails, I would suggest that you delete the thumbnails, cache, and analysis folders but take care not to delete your original clips. Do this in the Finder after shutting down iMovie.
    Then restart iMovie and let it regenerate the thumbnails. Let it run until it finishes.

  • Exchange Server 2013 Database not showing in ECP after removal of Exchange Server 2010

    I recently complete the migration of my Exchange 2010 server to Exchange 2013. I then proceeded to uninstall the 2010 server using setup.com /m:uninstall. At the end of the process I received an error that it did not complete the uninstall.
    I checked the server and Exchanged 2010 was removed. When I checked ECP on 2013 it still showed the old 2010 server listed. I used ADSI edit and manually removed the old sever.
    Now when I log into 2013 ECP I only see the one serve but when I go into databases, none are listed. I check under the server itself and it shows the database that it is using but it is not listed under the database tab.
    If I do a search under the database tab I can find it and adds it to the list. I can then open and view details.
    My issue is, after I log out and then back in, I have to run the search to find the database again. In ideas on how to have it show up in the list like it did  before I removed the 2010 Exchange server?
    Thank you,

    Hi,
    From your description, I recommend you verify the following things for troubleshooting:
    1. Please make sure that AD replication is completely by checking the user object's homeMDB attribute. This value should contain the DN value of the Exchange Server 2013 mailbox database.
    2. Wait 30 minutes for the cache on the Exchange Server 2013 Client Access Server to clear or restart the MSExchangeOWAAppPool on the Exchange Server 2013 Client Access Server.
    For more information, here is a kb for your reference.
    Exchange 2013 Redirects to Exchange 2010 for OWA and ECP
    http://support.microsoft.com/kb/2931385
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Exchange 2013 - Disabled Mailbox not showing up immediately in the Connect a Mailbox

    I have disable a mailbox  over an hour ago but it doesn’t show in the
    connect a mailbox section in the ECP Exchange 2013. immediately. The reason why I disable the email as I want to attach it to a new AD user which I have created.
    I know you have to wait for replication so it appears in the connect a mailbox but I’m not sure how long and we forced an AD replication to see if that works.
    I know with Exchange 2010, to get the disconnected mailbox to show immediately, I used to write a command Clean-MailboxDatabase “DB” to get it to appear in the disconnected mailbox but that doesn’t work with Exchange 2013 anymore.
    Anyone have any suggestions?

    I'm having a same problem.
    I did disable-mailbox to one mailbox over 24 hours ago. The mailbox is lost. Maintenance schedule was last night, but there is no change when i list disconnected mailboxes at the database.
    In this environment a new user account is created everytime the cost center of the employee is changed. So i need to do disable mailboxes every day. This is not a first time when the mailboxes have been lost. Many times the mailboxes are seen
    at the database straight after the disable-mailboxes are done. Some mailboxes are seen at the database after the maintenance schedule. But every now and then, the mailboxes are lost. Because the nature of this environment, this is getting really annoying.
    I should not use restore of the backup for this...
    Right now i'm looking mailbos statistics of the mailbox that got lost (i have started to take statistics to see if the mailbox is empty or not). The mailbox had 864 items and total item size was 33.18 MB.
    If the maintenance schedule is not cabable to update the status of the mailbox, then there is no use of using update-storemailboxstate? At least for me this command is doing nothing when i am having this problem.

  • Exchange search IOS 7 not showing present emails

    The exchange search before IOS 7 was never great in that it always left you with a load of unread emails. But it was actually pretty good at shifting
    through your mails on the server and returning results as long as you have good signal.
    Now though its returning hardly any emails and only ones from 2012 and not recent ones that should show up in a basic name search.
    Any ideas any one?

    I've posted about this issue also, no response from support.  Up until IOS7 the most annoying thing about Exchange email searches was how it frequently would decide to mark some random message as unread, showing that in the new mail bold count... Sometime I could find it and mark read, other times I had to delete the mailbox and re-add it... A nuisance for sure but it didn't impact my business.  NOW the ability to properly search an Exchange folder is broke... I can literally search on a known word in a subject, in the body... and it will not find the email.  I can do the same search in a browser using OWA (Office 365 user) and it finds each email it should... This creates a huge issue as I try to find and respond to emails.  Please fix it.. it's bad enough I'm considering moving off my beloved apple tablet and going Android.  Why Apple seems to feel its necessary to break things that work is beyond me.  

  • Exchange 2010 public folder not showing on exchange 20003 mailbox

    Hi,
    I have public folder on exchange 2003 and separate public folder on exchange 2010. On exchange 2010 user mailbox, I can see both 2003 and 2010 public folders. On exchange 2003 user mailbox, I can only see 2003 public folders. It is not the permission issue
    as I have given the user "owner" right and see not able 2010 public folder inless i move 2003 user mailbox to 2010 exchange.
    Appreciate if anyone could help me if to point me to directions or any hotfix I can run?
    Thank you very much.
    Pwint

    Are you using OWA or Outlook to view the public folders?
    If you're using OWA, the reason you can't see the folders is that OWA in Exchange 2003 uses WebDAV, which is no longer present in Exchange 2010.
    If you're using Outlook, you'll need to use the troubleshooting logs to determine the cause of the problems.
    It could be related to Outlook trying to connect directly to 2010 mailbox server instead of CAS. Because normally the mailbox server is installed without the CAS role, it does not allow a direct Outlook connection. Or it could be something else,
    like authentication.

  • CPC Assurance - Not showing E1 CAS Channel status

    Hello, I'm evaluating Cisco Prime Collaboration Assurance but I have some information on performance graphs that are not shown the right information, on E1 CAS Channel status, all channels are shown as idle, and I'll like to know what could be wrong with this or if some configuration could be missing to graph this data. Look at attached files.
    Running CUCM version 9.1.2.12900-11, configured as H323 with Voice Gateway.
    CPC Assurance version 10.5.0.49471(51383), patch version 1 installed
    Any help that could help will be appreciated.
    Regards,
    Juan Carlos

    This could be the cause.
    Just try that. Also, which browser u are using ?If possible, try IE if Mozilla is being used.
    Further, whencall is active , just run show isdn service in router and then, check status in Prime.
    https://supportforums.cisco.com/document/12021121/monitoring-current-call-volume-gateway-using-cisco-prime-collaboration
    regds,
    aman

  • Reversal of reversals not permitted in case of returns&payments FICA (ISU)

    We are constantly facing a problem on which we would like to have comments from you.
    Problem:-
    A payment comes and clears a receivable. A return is posted for the payment and the user later realizes that the return was posted incorrectly. Now, a reversal of this return is desired. SAP (ISU in FICA module) does not allow to reverse this and throws the message u201CDocument XXXXXXX can not be reversed due to reset clearingu201D.
    Same is true for the reversal of a u2018payment reversalu2019

    Ija,
    Just a question, instead of resetting the clearing at step 4, why don't you reverse the payment document?  When reversing the system is smart enough to know that this is a payment document and asks whether you would like to transfer it back to clarification.  So you don't actually reverse it.  If you say yes then you have two options.  Leave it in clarification and wait to see what the customer wants to do.  Secondly if you want to post it on account to the contract account you can do this out of clarification.  If you find out later that it was the wrong contract account the sysetm again lets you reverse this document (which again puts it back in clarification) so that you can post to the correct contract account.
    I think that your problem is that by reset the clearing that you lose the clarification link.  When I am playing around with payments and returns I always use the reverse document first because it give the option to take it back to clarification.
    Hope this helps.
    Natalie

  • Dispute case does not get updated with subsequent partial payment

    Hi Experts
    I am now still testing the Dispute management .. but it's my first time to see that some times created dispute case does not get updated with the payment posted against the invoice which the dispute case has been raised .. when i trying to add open item to the current dispute case i face this Error..
    Process step 004: Change not possible, process step 003 missing
    Message no. UDM_MSG037
    Diagnosis
    The dispute case is to be changed by process step 004 from accounting. However, there is at least one process (for example, clearing transaction from payment or credit memo) that was performed before the current step and that has not yet updated the dispute case. The changes to the dispute case must be carried out in the correct order.
    System Response
    The dispute case could not be changed.
    Procedure
    In an asynchronous change to dispute cases using IDoc, make sure that all IDocs of the previous process have been posted. Then you can carry out the required action (for example, post the current IDoc from process step 004 or include further items). The immediate previous process step is 003.
    Your kind feed back is highly appreciated..
    Regards
    Mahmoud EL Nady

    Hi
    Thanks for straight forward solutions its now working properly after run the program.. thanks too much..
    also do i need to run this program periodically or once i notice that one dispute case it not getting updated?
    Regards
    Mahmoud El Nady

  • Foreign Exchange Gain Loss not getting booked

    ECC 6.0
    Configured
    A.  OB59 - BSK,EVR,KT0
    B.  FS00 - 5800000 Foreign Exchange maintained in Local Currency, Automatic Posting is Ticked
    C.  FBKP - KDF Linked to 5800000 for Vendor Reconciliation Account
    Invoice USD @40
    Making Payment in F-53 USD @45
    Foreign Exchange of USD5 is not getting posted.
    Please guide on the same , suitable rewards
    Regards

    Hi
    In OBA1 -
    >Prepare Automatic postings for foreign Currency Valuation , Double click on Exchange Rate Difference using Exchange Rate Key -
    KDB
    give chart of accounts and enter.
    give Exchange Rate Difference Key (EKEY) , Expense A/C , Exchange Rate Gain A/C and save.
    Go to FS00 and assign this EKEY in Bank Account.
    This will work out.
    Regards
    Venkat

Maybe you are looking for