Foreign image imposed over images in Facebook

A strange image is displaying over my Facebook page.  Refers to Access denied and my not being permitted to access some strange URL. 
Some form of virus,no doubt.
How do I get rid of it?
Thanks
Ps this in my iPad 2

Sounds like others might be seeing the same thing at the moment. Are you seeing the same thing described here:
https://discussions.apple.com/message/21378721#21378721

Similar Messages

  • Super-impose an image over two columns

    Hello,
    I know how to create a two columns within a page using <div>. However, what is the best way to create a structure such that the image is super-imposed over the two columns and float the text around the image, which is on a different level (see attached). Please advise which rules should I use in CSS3 to make that happen.
    Thanks

    This is how I've done it in the past, it's a pretty decent fake float:center...
    http://css-tricks.com/float-center/

  • How to use the same image map over and over

    Sorry, I posted this a couple of years ago and got a good answer by Murray. I'm so rusty with it, I can understand how it works anymore.
    Question:
    I have a large jpeg image map for a hundred pages. The jpegs are all the same except I changed the city name for each one.
    So for each corresponding htm page, the 4-5 links out are the same.
    Waht is the trick to not have to create by hand hotspots? thanks.
    I have previous notes, but I don't understand anymore, (too rusty) what they mean:
    The good news is that you really don't need a template at all.
    Just open one of your existing pages in DW, select that central image, browse to select the correct replacement image, and save the page with a new name.  It will have all of the image maps already there, from the original image.  One and done as they say."
    My old interpretation of this:
    select the large jpeg and then in link field drag over to the new city jpeg

    Ok, Nancy, code copy/ paste did work fine.
    what does this mean:
    "Change the image in the properties panel to display your new image."
    (the image is displaying ok)
    NEverthesless, I think I got Murrays old notes.
    Here is my new version of Murrays writing, easiest way I think:
    You open up a pre-existing html, say Chicago. Then drag over with pointer to the new jpeg you want (Buffalo). It replaces Chicago with the buffalo jpeg, all links work perfectly. Then do a save as called Buffalo.

  • File Path Visible When I Hover Over Images

    Hi,
    I converted a PowerPoint document to a PDF. The PowerPoint document includes images (GIF, JPEG). When I hover my cursor over the image in the PDF I created I can see the file path C:\User\User Name\Photo\File Name.JPG.
    Is there a setting in the PDF that I can 'unselect' so I don't see the file path when I hover over images?
    Thanks,
    mindforge

    Please try the suggestions mentioned here : http://forums.adobe.com/message/3364072#3364072
    Regards,
    Deepak

  • Help! Why do my images look overly sharp and appear to download?

    I recently updated CC and now my images look overly sharp when I'm batching or working at a smaller size. When zoomed in at 50% they look fine. Is there any way to fix this? It's very difficult to work with everything looking so warped at a smaller scale. Also, when I open a file after batching and running an action it appears to "download" line by line instead of just opening. What is going on?

    When I am batching multiple images and running actions, I don't want to view them at 100% they are huge files. 24 megapixels, on average 60.5M and 3925x5945 at 300 dpi. That's REALLY zoomed in. I was not having this issue with CC until I updated it and now everything looks warped at a smaller scale. I want to know why it changed and how to change it back.

  • Float roll over image on top help

    Its looking quite messy.I have an image that is circular, 6
    points and each point has a rollover effect where a paragraph of
    text is to be displayed in middle of circle. I created the points
    to buttons, F6 on each button state, created a new layer and on
    rollover here I added my paragraph text with gray background so the
    text stands out.
    Problem Im having is the points of circle are 6 images along
    outside of circle. Some paragraphs of text are over some images,
    and some images are hiding parts of paragraph and gray backing. ???
    I think I need a float on top command for each paragraph
    symbol.
    My main timeline has only one line and one frame. I thought
    there may be an issue with the way the images are ordered in
    library, but tried moving some up and down and it didnt seem to
    help.
    Any suggestions on this? Im about brain dead over trying to
    get this to work.

    put all the paragraphs on the topmost layers. or convert them
    to movieclips and use the swapDepths() method.

  • Over image not working in Nav Bar

    I have established Up and Over images for my nav bar. The Up
    image is all that shows -- even when I mouse-over or click on the
    button. Thanks for your help!
    Jim
    "MM_nbGroup('down','group1','WhatWeDo','Images_and_Video/WhatWeDo_Over.gif',1)"
    onmouseover="MM_nbGroup('over','WhatWeDo','Images_and_Video/WhatWeDo_Over.gif','Images_an d_Video/WhatWeDo_Over.gif',1)"
    onmouseout="MM_nbGroup('out')"><img
    src="Images_and_Video/WhatWeDo_Up.gif" alt="Home page link"
    name="WhatWeDo" width="161" height="39" border="0" id="Home"
    onload="" /></a></td>
    </tr>
    <tr>
    <td><a href="whoweare.html" target="_top"
    onclick="MM_nbGroup('down','group1','WhoWeAre','Images_and_Video/WhoWeAre_Over.gif',1)"
    onmouseover="MM_nbGroup('over','WhoWeAre','Images_and_Video/WhoWeAre_Over.gif','Images_an d_Video/WhoWeAre_Over.gif',1)"
    onmouseout="MM_nbGroup('out')"><img
    src="Images_and_Video/WhoWeAre_Up.gif" alt="Who we are navigation
    link" name="WhoWeAre" width="161" height="39" border="0" id="Test"
    onload="" /></a></td>

    I'm sorry to tell you that the first thing you need to do is
    to get rid of
    the method you have used. It's quite antique, and was
    designed for framed
    pages. It adds quite a bit of additional code (some of which
    is invalid) to
    your page than would the alternative of using just ordinary
    image swaps for
    your menu.
    So, just create your menu from the up images in each row, and
    use DW's Swap
    image behavior on each.
    And put some duct tape over this NavBar option so that you
    don't use it
    again!
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "JRStaf4ord" <[email protected]> wrote in
    message
    news:gb85gs$5e$[email protected]..
    >I have established Up and Over images for my nav bar. The
    Up image is all
    >that
    > shows -- even when I mouse-over or click on the button.
    Thanks for your
    > help!
    >
    > Jim
    >
    >
    >
    "MM_nbGroup('down','group1','WhatWeDo','Images_and_Video/WhatWeDo_Over.gif',1)"
    >
    onmouseover="MM_nbGroup('over','WhatWeDo','Images_and_Video/WhatWeDo_Over.gif','
    > Images_and_Video/WhatWeDo_Over.gif',1)"
    > onmouseout="MM_nbGroup('out')"><img
    > src="Images_and_Video/WhatWeDo_Up.gif" alt="Home page
    link"
    > name="WhatWeDo"
    > width="161" height="39" border="0" id="Home" onload=""
    /></a></td>
    > </tr>
    > <tr>
    > <td><a href="whoweare.html" target="_top"
    >
    onclick="MM_nbGroup('down','group1','WhoWeAre','Images_and_Video/WhoWeAre_Over.g
    > if',1)"
    >
    onmouseover="MM_nbGroup('over','WhoWeAre','Images_and_Video/WhoWeAre_Over.gif','
    > Images_and_Video/WhoWeAre_Over.gif',1)"
    > onmouseout="MM_nbGroup('out')"><img
    > src="Images_and_Video/WhoWeAre_Up.gif" alt="Who we are
    navigation link"
    > name="WhoWeAre" width="161" height="39" border="0"
    id="Test" onload=""
    > /></a></td>
    >

  • Setting the order of a roll over image in a quiz

    Hi,
    I'm using captivate 4 and having issues in setting a quiz for my students.
    I want to have an icon to roll-over so the students can access information relating to the question, eg, diagrams, tables, graphs etc.
    I have done all this yet when the roll over image appears its order is set behind the question and answers, I need it in front. when trying to change the order, eg bring to front, all the options are grayed out and not available. Is there a way to fix this as I know I cannot use a slidelet in a question slide.
    I have also tried to re-order the question and answer text, but is is also grayed out.
    Any help would be greatly appreciated
    Cheers
    Andrew

    Hello,
    You cannot insert interactive objects on any default question slide from pool or not. You will have to change the action to be executed on Success/Failure. There it is possible to jump to a slide.
    Beware: you can never jump to a slide that is outside of the quiz 'scope'. This scope starts with the slide where you have the first scoreable object, which can be a question slide but also a button/click box/TEB with a score. The scope typically ends with the score slide. So be sure that the slide you want to jump to are in that scope. Eventually you can add a scoreable object (with a low score perhaps of 1pt) like a button or click box to the first slide of your project. If you keep the score slide as the last slide you will not have to worry anymore about the scope.
    Hope this makes sense,
    Lilybiri

  • Lines over images and around text in Captivate SWF file

    My project works & views fine in captivate and when published, it views fine on my mac - through flash player and browsers. But when I send a swf file to the client to view they see odd lines above and below images.
    But they dont see the lines when they view the htm file within a browser - then it views fine.
    The lines only appear when there's text over an image.
    Screen shots attached.
    My captivate project was created by importing a Powerpoint document, with images and text on each slide.
    I've changed the optimisation / slide quality through prefrences and on each slide to the highest quality.
    I've also un-selected the advanced slide compression.
    Is there another thing I can try to iron out these lines?
    Some of the images within Powerpoint are stretched, would this cause the lines?
    Is it a flash player issue?
    Or a zooming issue?
    Any help is much appreciated!

    Thanks Lilybiri,
    I am a new user & just finding my way
    I understand how to publish and how Captivate creates a zipped file with a SWF, HTML, JS and CSS files etc. (Im using Captivate 7). 
    How do you send Captivate projects to clients for review / approval before you supply them with the whole project zipped file?
    So far I've been sending them the swf file to check. And have had troubles with them viewing the lines over images and around text. Even though I cant see the lines.
    I need the client to see what I'm seeing - a project without any lines.

  • Image reference vs image "value" to pass over

    I have an issue  (or so I believe) with image references or pointers as I prefer to call them.
    Majority of the functions use the reference and it is fine for efficiency, however...
    I have two fast parallel loops working on an image. The first one, once it is done with the image, it passes it to the next loop and itself gets another image etc. The problem with this situation I have is that the second loop gets the reference and in the mean time the first one is changing the value of the image since it is working with the same reference. At least I assume it is what is happening.
    The only real solution to this problem would be (imho) to pass a copy of the image (a vale instead of a pointer) to the second loop. This way each one is working on its own chunk of memory. Using queues seem reasonable to me here. The problem is I do not see a quite clear way to get to the so called value of the image instead of a pointer. I was thinking about using "Flatten to Image" and passing it over to the next loop. Is there a better way to deliver a "value" copy of the image?
    Also the architecture of two loops must be kept the way it is. Do I have a more brilliant way of having two loops working in parallel and then passing over image data? Thanks a lot.
    Solved!
    Go to Solution.

    This is my version of the image ring buffer. I briefly tested it and it seems to work. If not please let me know. If you know how to improve it, please post. Thanks
    Attachments:
    CirImBuf.vi ‏11 KB
    CirImBufCreate.vi ‏14 KB

  • Insert shape over image in table cell

    Want to use circles, ovals, lines with arrows to point to some part (text or image) of a cell in a table.
    Need to emphasize certain areas of graphics in a document used as a step by step type document.
    If I add the shape outside the table and then try to drag/drop on to the image in the cell, the entire cell jumps to a new empty cell.
    Can nod get image to appear over the image in the table cell.

    Hello,
    do you think about this, please have a look here: http://help.adobe.com/en_US/dreamweaver/cs/using/WSc78c5058ca073340dcda9110b1f693f21-7b86a .html.
    Another way, to add text over an image uses Nancy O.'s Demo here (I would prefer by using PS or similar):
    http://alt-web.com/DEMOS/CSS-Sold-Out-Text-over-image.shtml
    Hans-Günter

  • Translucent gray over image in thumbnil (grid) view

    See example image below:
    one thumbnail looks OK (on left), but other, problem image (on right) has translucent gray layer over image!
    The problem images are not in a stack.
    If I click the problem image thumbnail it looks normal, but the gray overlay re-appears if I click on anther image.
    It shows OK in develop module.
    I know this is probably something stupid, but...can anyone help identify what is happening?
    -Colin

    Most probably you have flagged the image as "rejected" by pressing "X" on your keyboard.
    When an image is flagged as rejected it gets that grey overlay that disappears when you select the image. You can still edit them in the Develop Module.
    To delete the "Rejected" flag, select the images with the grey overlay and press "U" or "P" on your keyboard. "U" stands for "Unflagged". "P" stands for "Picked".

  • Unable to set a transparent panel over Images for annotations

    Hi All,
    I am developing a Swing Application for image processing.
    My aim is to display the image on a JPanel and over which the user should be able to draw different geometrical figures(line,circle,polygons,etc) and write annotations on that. These drawings should not affect the original image.
    Also, these drawings should be movable, like if I zoom the image, drawings over the image should also zoom in the same ratio.
    Initially, I thought of using the GlassPane but stuck up with some issues, relating to its implementation.
    It would be great, if you could suggest me some guidelines or pont me to some resources for the same.
    Any help in this regard will be highly appreciated.
    Thanks,
    Manu
    Edited by: manu_agarwal on May 8, 2009 12:46 PM

    Hi Adam,
    Thanks for your reply.
    My intention is that after draing annotations on the image, if the user wants to zoom or move image(panning), the annotations should also move.
    Thanks,
    Manu

  • Draw line over Image??.. in Grid Format

    Hello frnds,
    what i want to do in my project is to draw image on JPanel with grid lines.. ??
    May be image in background and lines over image..
    I searched forum before but coulnt find appropriate thread.. please help me out??
    gervini

    from within the JPanel's paint() method.In Swing components you should overide the paintComponent() method, not paint().

  • Roll-over images

    Does RoboHelp support roll-over images?
    I've tried every way to insert a roll-over image into my
    project, including editing the html page in dreamweaver but as soon
    as I open it up in RoboHelp and generate it the images either does
    not change or it is not visible.
    Please advise...
    Thanks,
    Susy Carrillo

    You might take a look at
    Walter
    Zorn's free tooltip utility, a really neat onMouseover
    application that makes your tooltips look like popups, including
    the use of links within them.
    You can use it for text links or in combination with image
    maps. So far, I'm using only the former, but I'll be using the
    latter for some new, complex C# screens in our next version
    release.
    There are a few things that can trip you up, such as: all the
    HTML inside the Javascript area (the
    escape('Some text') portion) cannot have carriage returns;
    and certain characters must be escaped with a backslash (such as
    replacing double quotes with backslashed single quotes). However,
    it's all explained quite well on his site. You can control
    backgrounds, transparencies, images, placement, etc.
    As Peter says, do all your testing in a scrub project before
    going live in the real one.
    Good luck,
    Leon

Maybe you are looking for