Foreign trade- Sales Order was blocked for delivery

Hi,
We maintained legal regulation for a country  "X" and those settings working fine for foreign trade.
But when the same material using for different country and plant, the system blocking sales order -
In the export log - error message says no legal regulation action( true -we are not maintained for that country-) and license status-4.( Not OK)
How to correct this
if I maintain exemption certificate in material master it is working- But we have more number of material, it is difficult to maintain.
Is there anything to set plant level or country level
Thanks
Chidambaram

Hi,
Thank you for your suggestions, Those settings are ok,
What i observe is , we are using same sales document type for more than one country which is activated for Legal control. It seems it giving troble- We also using same item cat. for more than one country.
In one country we donot need Legal control to happen- Is there any USER exit, in which i can write a program the legal control data in field " EXCOK" can be bypassed while creating sales order
Thanks and regards
Chidambaram

Similar Messages

  • Sales order is blocked for Delivery-ZH Cost estimate Req

    Hi experts,
    When I am saving the sales order I am getting the informative message standard cost estimate for material xxxx is missing. when i am creating delivery with reference to sales order  it is not allowing me to do delivery it is showing that Sales order is blocked for Delivery-ZH Cost estimate Req( in  a log). Can you pls let me know what configuration I have to check.
    Regards,
    Sunina Agarwal

    hello, friend.
    it looks like product costing has been activated in your environment.  if such is the case, you would have to coordinate with your FICO consultant, and they have to make the necessary standard cost estimates.
    please also check if the cost estimates are part of the incompletion procedures.  if it is, you would not be able to bill the transaction even if this is taken out of the incompleteness procedure.
    regards.

  • No order was found for delivery 0000014019 /000100

    Hi All,
    Iamloading the data for my delivery ZODS from 2lis_12_vcitm from PSA , but getting the following error :
    No order was found for delivery 0000014019 /000100 .
    Can any body help me out.
    Regrds..

    Technically, only when there is Header data in VBAK the delivery can take place, there should be record in VBAK, someone may have done a hard delete on that record. The question is, I am not sure BW system internally validate if the record has a valid order number or not. As long as the data gets to PSA fine, then that should be loaded to ods without problem. It seems like may be this record has some invalid char... seems like the order and line item attached, but the line item is too long, try to confirm if that is valid record specially the line item.
    thanks.
    Wond

  • Without exceeding the credit limit sales order is blocked for credit check.

    Dear Experts,
    In my production server as well as quality server sales order is blocked for dynamic credit check.But the fact is that the credit limit is not exceeded.only 18% of the credit limit is used by the cutomer.The same problem is there in quality server also.
    Kindly help.
    Best Regards
    Biju

    Dear Biju,
    Check whether the customer code has exceeded credit limit in any other credit control area.
    Run the following programs.
    RVKRED77 , RVKRED88 , F.28
    After credit re-organisation, please check again and revert back.
    Also would like to ask you whether you have made any recent changes in the credit master data [FD32].
    Thanks & Regards,
    Hegal K Charles

  • T Code for doing mass output for Sales order like VL71 for Delivery

    Hi
    Can anyone let me know what is the t code for the sales orders for which despatch time was set as "3- using own transaction"
    Muthu

    Hi,
    Though there is a program, there is no output for sales order similar to VL71 for delivery. Sales order is the only transaction for which there is no tcode for this purpose.
    You can do the following.
    Go to SE38 give program name SD70AV1A and execute
    Now give ur selection criteria and save this as a variant.
    Now you can schedule a job at regular intervals using this variant.
    This will enable that if you maintain the output record as 3(using own transaction), the output will be created in mass for multiple sales orders.

  • Sales order items due for delivery,customer want to cancel order reming ite

    Hi,
    sales order raised for 50 items and delivered 40 items. customer does not  want 10 items.
    how we can canceled that reaming 10items.
    Regards,
    Raja
    [email protected]

    Hi just open the Sales order in change mode i.e. VA02. and less the quantity i.e maintain as 40 . Then the remaining quantity automatically come and add to u r plant stock....( check the plant stock using T.Cdode MMBE )
    it will solve u r problem.
    regards,
    vas.v.s
    REWARD POINTS IF IT HELPS.
    Message was edited by:
            v.s.vas.

  • Sales order is blocked for single-item planning

    MD50 results in below
    Sales order  000010 is blocked for single-item planning
    Message no. 61211
    what are some possible causes?

    Hi Friend,
    Please check the status of the concerned sales order and validate it.

  • Order blocked for delivery as a result of credit check

    Hell SAP Experts,
    A Order is blocked for delivery as a result of credit check.
    I have RELEASED it through the TCode- VKM3. But still the Order's over all credit status is ‘B’   (Credit check was executed ,document NOT OK).
    I have checked if the Customer is BLOCKED for Delivery in VD05,but it is not.
    Is there any other Place where I need to RELEASE such Order from  Credit check?
    Can anyone help me to remove the Blocked order.
    Appreciating your quick reply.
    Thanks in advance ,
    Umesh Karane

    I have RELEASED it through the TCode- VKM3. But still the Order's over all credit status is ‘B’   (Credit check was executed ,document NOT OK).
    Over all status B means still the block was not released in your attempt of VKM3. Goto VA02 sales document header-status you will find credit status as blocked.
    if the document is released system shows as "D" so please try to release the document once again properly with VKM3, apart from this t code you can also try with VKM1 or VKM4.
    After release check once again the status it should be D
    thanks,
    Srinu.

  • Sale order block for delivery

    Hi,
    My requirement is -
    whenever I save any sale order,by default it should be block for delivery.
    how to make the setting in system.
    Harsh

    Hi
    Put Delivery Block at  Sales Order type  in t code  VOV8.
    regards
    kedasu.a

  • Sales Orders Blocked For Delivery

    Hi,
    Do we have T-Code for Sales Orders Blocked For Delivery other than VA14L,Because Customer name is not there in VA14L list.
    Thanks,
    NAG

    Hi naga sudhir
    Go to T-code--VA14L
    In that  go to menu-SettingsLayout--Current/Choose
    In this layout u can choose fields what u want to appear in that row.
    Any quries revert back to me
    Regards
    Srinivas.

  • Sales order blocked for delivery but not showing in VA14L

    A Sales order is in delivery block and its not showing in VA14l Delivery block .
    Please help.
    Regards..
    Bhyrav

    Hi,
    Transaction VA14L report displays sales orders with header level delivery blocks & credit blocks.
    If the delivery block in sales order item level the VA14L will not display those orders.
    You may try V.14 transaction but it will not display sales orders with credit related delivery blocks.
    Otherwise, provide more inputs so that it would be easy to analyse the issue.
    Regards
    Suresh.

  • Release Orders Blocked for Delivery

    Hello Experts!!
    We have V.23, release orders blocked for billing.. is there a similar transaction where we can release orders blocked for delivery??
    Help is greatly appreciated.

    Hello Carla,
    Yes in the T-code "V.23", you can release the billing block for SALES ORDER in one single click. While releasing the delivery block for the Sales order the following T-code are useful:
    1. VDBLOCK
    2. V.14
    3. VA14L
    When you are using these T-codes, you get the list of all the Sales order which are blocked for Delivery. Then you can select the document for which you want to remove the delivery block and do the required updation.
    Regards,
    SARTHAK

  • Problem for searching Sales order no. ref. to delivery no. from VBFA

    Hi,
    I want to search Sales order no. ref. to delivery no., as generally ref. to devilery no. as a VBELV filed for Table VBFA , I am selecting  VBFA where VBTYP_N = C that is Order ,  but in my present case when I am looking for the available entry in VBFA ref. to delivery no. I am not getting Any  VBTYP_N = C , insted of this I am getting VBTYP_N = Q, i.e transfer order and also in VBELN  it is just giving the date of delivery , as 20090430,
       Can u help on this ,  I want to get SO no. ref. delivery no. and then want to search customer PO and Date . for that SO.
    regards,
      zafar

    Hi Zafar,
    VBFA is a document flow table. I'll tell you the way to fetch preceding or subsequent document out of this table:
    Document flow for order to delivery is as below:
    Sales order > Delivery>shipment-->billing
    So sales order is preceding document of delivery so put delivery in VBELN(SUBSEQUENT DOCUMENT) and fetch the VBELV i.e. preceding document for the same. Also put document category as 'J' i.e. delivery.
    hope it helps.
    Vivek Gupta

  • Order blocked for delivery as a result of credit check - VL060

    Dear Experts,
    Credit Management is active in the Process.
    Every time I try to create Delivery Document including Returns Delivery the following error is displayed "Order blocked for delivery as a result of credit check"
    I will release the document by using Tcode VKM3.
    Though Credit Limits are maintained for Customer in FD32 and credit Exposure has not exceeded the Credit Limits the Delivery Document creation is bloced.
    How to solve this issue.
    Regards
    Hari

    Hi Prasanth,
    Checked both the areas i.e.
    In VOV8,  the field Delivery block is Blank and
    In VOV7 for Returns item category credit active is unticked.
    Even while doing standard delivery system is blocking for creating Delivery, which needs to be released using VKM3 Transaction. I have checked for Item category TAN where the credit active is checked.
    Please suggest solution for both Standard and Reurns Delivery Block issue.
    regards
    Hari

  • Order blocked for delivery

    hi
    Order blocked for delivery as a result of credit check where i have to salve this error
    Will reward you
    thanks

    You can also increase the credit limit in T-code - FD32, provided you have authorizations & necessary approvals.
    Thanks,
    Jignesh Mehta
    Mumbai

Maybe you are looking for