Foreing keys works only when created as CAPITAL?

Hello,
When working with HTML DB tutorial, I have noticed that foreign keys works only when I do create them as CAPITAL. I did create some foreign keys manually, and when I was trying "query by example" it did not work correctly unles I did re-create the foreign keys using all captials in their name. Why is it that?
Thank you,
DanielD

I let it dry out more and it started working. It still has a quirk or two but I can live with it.

Similar Messages

[SL410:2842RK1] Certain keys work only when pressure is applied

Certain keys on my laptop has started to fail. It started with the F2 key,then the F5 and now the backspace key. They work when they are pushed down hard. Do i need to change my keyboard.
Solved!
Go to Solution.

Welcome to the Forum!
First thing I would do is give the keyboard a thorough cleaning. This may help to relieve the "sticky" keys. Use a 50/50 mix of rubbing alcohol and water and follow the Keyboard cleaning instructions here: http://blog.lenovo.com/design/keeping-your-thinkpad-clean
There is a method for changing out individual keys. However, it can be slightly tricky (if it's your first time) and might not be worth the hassle. Plus, this may not resolve the issue. Ordering a genuine Lenovo new or used and properly tested keyboard is probably your best bet. The cost to replace the entire keyboard (from your location) may not be much more than ordering and fiddling with 3 different keys. You may use the part numbers in this document to assist your search: Keyboard service parts - ThinkPad L410, L510, SL410, SL510
Here is a useful guide for removing and replacing your keyboard: Keyboard removal and installation - ThinkPad L410, L412, L510, L512, SL410, SL510. And here is your Hardware Maintenance Manual.
Have a great day. (I do not work for Lenovo)

Does the NavigationController work only when placed in appDelegate?

I am trying to build application that has a tab bar controller with two view and the first view contains a segmented control.
Based on the decision of the segmented control, I load the tableview. The table view has an instance of navigation Controller in which I have assigned the tableview controller as a rootview controller. When I click on any row of the table view, a new controller gets pushed on the table view. In my case, the new view does not show up on the screen, once the row is clicked. I used NSlog and checked that the views pushed on the stack are correct.
I read many threads here and saw that all of them use tabBarController and then it directly uses the navigationController and viewcontroller. Is this the only config that works ?
What if I want to have a tabBarController->tableViewController->NavigationController, isn't it possible? Can anyone please help?

WitchKing wrote:
So, if I understand this fully, I can initialize the navigation controller as soon as the any row is clicked and put the tableView I am on as my rootView for the navController. and also push the next view controller I want to see, on its stack. and present the navigation controller's view.
The usual way to implement a table view drill-down would be to make the first table view (or the content view which includes it) the root view of the nav controller. I.e. the table view's controller would be the root controller. When you do it that way all the objects will do what they were designed to do, and the code to push and pop subsequent views will almost write itself.
However there's no reason you can't do what you described, which (if I understood) would be to attach the nav controller's view to the hierarchy only after a row in the table is selected. Note however, that you couldn't then expect the nav controller to make that first transition from the parent table view. You would have to provide your own transition to the nav controller's view.
You bring up a good point in any case. I never explicitly answered the question in the Subject line of this thread.
does the NavigationController work only when placed in appDelegate?
No, there is no requirement to create a nav controller in any particular position of the view hierarchy. Unlike a tab controller, a nav controller need not be the root of the hierarchy (i.e. added directly to the key window). In fact you'll find several examples in the docs which show one or more nav controllers under some other controller.
there might be some problem with adjusting bar heights and etc though.
I'm not sure you proposed anything that would make it difficult to configure a table view. One nav controller issue that will impact table view position and size is the attempt to hide the nav bar which would otherwise appear above the table. I walked, unsuspecting, into this problem when I tried to help with another, currently ongoing thread that might interest you: [http://discussions.apple.com/message.jspa?messageID=9606805#9606805].
While I'm pasting links, this one is also relevant to your post: [http://discussions.apple.com/message.jspa?messageID=9607946#9607946].
Thank you for the very kind words about my posts. For some reason, this past few weeks I've been spending most of my forum helper time writing about table views and nav controllers. I sure hope I've been dispensing correct information. It's not like I have any knowlege of the internals. These puppies are black boxes to me, so I'm just going by the same docs you have and my own (growing!) collection of test beds.
\- Ray

Web ADI works only when cache is cleared

I have created a custom integrator and the web ADI component works only when I clear the cache from the functional administrator responsibility in Oracle Apps. The component has a lot of validations for the fields and is expected to insert upto 2000 lines, It works fines for a small number of lines but the web ADI hangs for a large number of lines (>500). But if I clear the cache, it works fine. Anyone has a solution for this, cause I cant clear the cache always and I cant tell my customer to do the same.
G. Arun
Oracle SSI

The WebADI caching can be very confusing. I made a little summary of what you can do to avoid caching problems like:
"ORA-06508: PL/SQL: Could not Find Program Unit being Called in Custom Web ADI" or
"SQL exception occurred during PL/SQL upload"
A) clear cache with http://<machine>:<port>/OA_HTML/BneAdminServlet
B) clear IE cache & restart
C) clear the cache from the functional administrator responsibility
D) Bounce the Apache server
E) SQL command: Alter system flush shared_pool
F) Download another WebADI spreadsheet (but you can re-use your old spreadsheet)
G) log out and log back in EBS
H) login at another computer and try it there
...or sometimes just wait for a while till it works again.
Jeroen

Unable to use the keyboard in XP keys work OK when boot into dos

Unable to use the keyboard in XP. It was working for over a year OK with XP running
keys work OK when I install win98 or use a dos boot disk.
If I try to reinstall XP I can not use any of keys to input anything.
Return
Esc
CapsLock
ctrl-alt-del.
NO KEYS WORK AT ALL OTHER THAN
ë à
I did an upgrade from win98 but that did not work.
Any ideas

billwyatt, welcome to the forum,
I think you forgot to mention which ThinkPad you have. It would be even better if you could post the Type and Model Number as this will help members to hopefully help you. If it ends in CTO please provide some details about the ThinkPad. Please do NOT post your s/n.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Why is Fault Policy working only when the BPEL's transaction is requiresNew

Hi All
I've defined Fault policy & fault bindings files for faults in my BPEL process. I'm using Oracle SOA Suite 11g.
But the fault management framework is properly working only when the transaction property(bpel.config.transaction) of the BPEL is set to "requiresNew" in composite.xml
When i modify it ot required, its not working, i.e. it is waiting for some period and erroring out. I could not manage these errors from the EM as we do for those in Fault Management Framework.
Why is this behavior?
I went thru this article, but could not understand it
Transaction and Fault Propagation Semantics in BPEL Processes(http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/soa_transactions.htm)
Can someone pls explain this.
Regards
RaviKiran.

Please refer http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/soa_transactions.htm
Thanks,
S

My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

My iphone4's mic is not working. I can assure that my iphone4 is not on mute mode. The audio is working only when headset/handsfree plugged in.I tried reset my handset many times already but still nothing got success.what is the remedy to comeout from it.

Try plugging the headphones in and gently wiggling them around for a few seconds. It may be that the sensor that tells the iPhone that headphones are plugged in has gotten stuck. If this doesn't work, they try a reset (hold down Sleep/Wake and Home all the way until the Apple logo appears on the screen).

USB OTG Work only When USB Debugging is On

My USB OTG worked correctly. But Now it works only when USB debugging is turend on. What Should I do Now

@ytheekshana
what if you repair the phone with PCC
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

HT201401 Microphone works only when using the phone in hands-free

Microphone works only when using the phone in hands-free (speaker on) mode. Otherwise, only a constant buzz, accompanied by regular clicks (repeating 2-3 times/sec) can be heard by called persons or when recording a memo. Makes Siri unusable, and cannot make private calls unless in a private area. Does anybody have a fix for this?

Okay I just solved the problem myself..
For anyone that may have the same issue:
The microphone used when recording video, is the little dot next to the jack on top of the iPhone 4S (maybe also iPhone 4, don't know). There was some dirt in this tiny little hole, and I simply just removed it with a very thin needle, and now it works great!

My touch pad does not work only when using Safari browser. The screen was grey. Help!

My touch pad does not work only when I use Safari browser online. The screen was grey. No matter what I do, there is no reponse. Only the web address box works. What is this problem? I can use App Store and everything else fine.
Someone please help.
Thanks

I would try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and delete cache, history and cookies.

Bitmap pattern has seam ONLY when created with "Object → Pattern → Make"

I think I've encountered a bug with Adobe Illustrator CC 2014.
I'm trying to make a repeatable pattern out of a bitmap, which I downloaded from http://subtlepatterns.com
Most of the patterns I try, work correctly, but one in particular behaves strangely.
(This is the png in question: https://dl.dropboxusercontent.com/u/473648/pw_maze_black.png, Here is an example AI file that shows the problem: https://dl.dropboxusercontent.com/u/473648/Pattern%20Seam%20Example.ai)
When I create a pattern with the "Object → Pattern → Make" menu item and then apply it to a shape, I get hairline seams that appear in the pattern at various zoom levels. If I export the file with "Save for Web" to a PNG then the seam disappears, though if I use the plain "Export" feature to create a PNG the seams appear in the output file.
The strange thing is when I create a pattern from the above PNG by dragging it to the Pattern palette and use that pattern, the seams do not appear in any export files, or in the design window of AI.
Other patterns I've tried from subtlepatterns.com work correctly when created with the "Object → Pattern → Make" menu item.
Obviously I have a solution to this problem, but is there an explanation for the difference between creating the patterns with the two methods, or is it a bug?
Thanks,
Caleb Land

When dragging the pattern to the swatches panel works, just do it. You don't need the pattern editing mode for this one.

Photoshop CS4 shuts down only when creating new project.

I've had CS4 web premium since nov. 08 and everything worked fine until the most recent update from adobe.
I ONLY have this problem with Photoshop cs4: when creating a new project after selecting the aspects (name, width, hight, etc.) when you press ok it shuts down and no error is given as to why it shut down, it just does.
opening documents that had been created prior to the last update isn't a problem, I'm able to do everything Photoshop cs4 has to offer.
I can also open a file started in another program and edit them in PS CS4 (ie: fireworks , or AI).
but for some reason if I want to start a project in photoshop it just shuts down, never used to happen. any clues? any one else have a similar problem and know how to fix this?
running on windows XP

I think you mean a new docuement - Photoshop doesn't have "projects".
Photoshop shouldn't "shut down" - there should be some message about a crash.
And the most likely causes at that point are OpenGL (try turning it off in prefs) and your default printer driver (try changing default printers).

SUBMIT button works only when clicked twice... Online interactive form

Hi,
I have created a interactive form with SubmitToSAP button. In this I will enter a contract number and will click SUBMIT button.
For the first time it is fetching the contract details properly.
In the same form, i am changing the previously entered value with another contract number and clicking SUBMIT.
Now the details for the previously entered contract number is only displayed. Again if i try for the same value ( which i used for the second time ) and press submit, it is workin correctly.
So, the problem is, except for the very first time SUBMIT button action, the button works fine only when clicked twice..
please help me in solving this issue..
Regards,
Surya.

Hi,
In addition to my previous post, I am also using RESET FORM button from Library.
First I am entering the contract number (say 400000000) in the form and clicking submit button. The contract details are fetched and displayed in the form.
Now i am Resetting the form using Reset Button, and giving new contract number (say 400000020). When I pressed Submit button , the details of the first entered contract number (400000000) is coming.
Then again I am giving 400000020 or any other number, it is fetching the details correctly for that number...
Can anyone help me in this issue..
Thanks,
Surya.

Ipod Touch is working only when plugged to a charger.

I haven't been using my Ipod for over a month. It wasn't used by anybody at all to be specific. Yesterday, I got it back and tried to use it. First it was charging for about 40 minutes, but after this it turned on and worked correctly. I left it charging a few hours more, and when I came back, unplugged it, Ipod wasn't working. I plugged it back, magic, it's working again. So I left it charging over the night, but when I checked it today's morning it gave the same results. Maybe You've got some solutions i could use.
2 Important things:
- It works only with a wallcharger, not with a computer cable.
- I wouldn't like to go to a service because my warranty has expired.

You can try resetting it by holding down the home and sleep keys, past the power down, and until you see the silver apple logo. Let it reboot and then let it charge and see if it holds the charge. If it doesn't then your battery may have died. Afraid that isn't user servicable. You can either take it into an authorized repair place or you can take it to a third party repair shop. Using hte non-authorized place will void your warranty, but if your warranty is done like you said, then it may be cheaper and doesn't matter as much.

PUT KEY works only without C-MAC and C-DEC secure channel

HI!
I would like to know why the PUT KEY command to set a new key set only works if a secure channel is opend without secure messaging. My smartcard is GP 2.1.1 compatible.
This is a problem because I'm not allowed to open a secure channel without secure messaging when the smartcard state is SECURED. I even don't know why this is not allowed. Visa Platform 2.0.1 defines this behavior but I can't find it in the GP 2.1.1 spec.
Best regards, globalplayer.

Are you saying that the PUT-KEY command works only in the card life cycle state SECURED?
I can show you that for JCOP it also works in OP_READY, security level '00' --> authentication only, no secure messaging expected:
- /terminal "winscard:4|OMNIKEY CardMan 5x21 0"
--Opening terminal
/card -a a000000003000000 -c com.ibm.jc.CardManagerresetCard with timeout: 0 (ms)
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 34 31 56 ;.....1.EJCOP41V
32 33 31 97 231.
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V231"
=> 00 A4 04 00 08 A0 00 00 00 03 00 00 00 00 ..............
(54923 usec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65 oe...........Y.e
01 FF 9F 6E 06 40 51 63 45 29 00 73 4A 06 07 2A ...n.@QcE).sJ..*
86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B .H..k.`...*.H..k
02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64 ....c...*.H..k.d
0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09 ...*.H..k...e...
2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01 +...Hd...f...+..
04 01 2A 02 6E 01 02 90 00 ..*.n....
Status: No Error
cm> set-key 255/1/DES-ECB/404142434445464748494a4b4c4d4e4f 255/2/DES-ECB/404142434445464748494a4b4c4d4e4f 255/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> init-update 255
=> 80 50 00 00 08 AE 78 53 3B 25 42 AC 42 00 .P....xS;%B.B.
(75418 usec)
<= 00 00 70 15 00 05 94 91 11 07 FF 02 00 38 5C 1F ..p..........8\.
9C 9B 00 3A 3D 5D F1 31 A0 12 7A 35 90 00 ...:=].1..z5..
Status: No Error
cm> ext-auth plain
=> 84 82 *00* 00 10 59 65 45 89 C1 15 42 BD DB 6D CF .....YeE...B..m.
CA 0D 8E E3 C7 .....
(179029 usec)
<= 90 00 ..
Status: No Error
cm> card-info
Card Manager AID : A000000003000000
Card Manager state : OP_READY
cm> set-key 1/1/DES-ECB/404142434445464748494a4b4c4d4e4f 1/2/DES-ECB/404142434445464748494a4b4c4d4e4f 1/3/DES-ECB/404142434445464748494a4b4c4d4e4f
cm> put-keyset 1
=> 80 D8 00 81 43 01 80 10 F1 D3 F6 3B 73 F8 EF 6C ....C......;s..l
0A CE B0 23 2A 26 D0 98 03 8B AF 47 80 10 F1 D3 ...#*&.....G....
F6 3B 73 F8 EF 6C 0A CE B0 23 2A 26 D0 98 03 8B .;s..l...#*&....
AF 47 80 10 F1 D3 F6 3B 73 F8 EF 6C 0A CE B0 23 .G.....;s..l...#
2A 26 D0 98 03 8B AF 47 00 *&.....G.
(214587 usec)
<= 01 8B AF 47 8B AF 47 8B AF 47 90 00 ...G..G..G..
Status: No Error

Foreing keys works only when created as CAPITAL?

Similar Messages

Maybe you are looking for