Forgot my iphone passcode and my ihone disable
I forgot my passcode and my iphone is disable and it ask to connect to itune and when i do connect it , it give me a message as " to allow access. please respond to your iphone...." and nothing happened .
i am trying to connect to itune so i can restore my phone it will not recognize it.
I truly appreciate your help.
You will need to restore via the recovery mode per http://support.apple.com/kb/HT1212 and may need to first login to your iCloud account and remove the iPhone from your Find My Phone devices so you are not hung up by the Activation Lock.
Similar Messages
-
Hi
Please help with the subject matter:
Forgot my iphone passcode and cannot restore because I can't turn off Find My iPhone in iCloud.What can I say...it's a brick..
Visit your carrier and see if you can trade it in for a new phone.. -
how can i solve this without losing my data
You have two issues. First, to disable Find my iPhone go to https://icloud.com/find, log in with your Apple ID and password, erase the phone, then remove it from your account. You can then restore it.
If you have a recent backup of the phone either in iCloud or on your computer you can restore the backup after restoring iOS on the phone. If you don't have a backup you will lose your data. -
I've forgot my iphone passcode and what i go to restore my phone it says i must go to iCloud
I can't get in to my iphone as it says to resotre it i need to go on to my iphone to turn of 'find my iphone', but i can do this as i can't unlock the phone.. help?! please?
Use iCloud to wipe it if it's yours and restore from backup later.
https://www.icloud.com/#find -
Hey, i've got a problem.. i forgot my iphone passcode and then i wanted to set the iphone back, but then there's a note which says that i have to turn off the 'search my iphone' function in the icloud on my iphone. But i don't get through the passcode to my iphone.. So i can't set it back myself.. what would you do? send it to apple? Thanks for the answers
iOS: Unable to update or restore
-
I have forgot my Iphone passcode. Itunes will not let me restore it, i do not have icloude,or find my iphone,and the closest itunes store is 4 hours away how can i unlock, or reset my phone?
Try this:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I forgot the password of my iphone 5 and it was disable, what can i do to unlock it, without loosing my pictures?
Hopefully you had it backed up on icloud on or your computer. Try doing a restore by putting your phone in recovery mode then restoring your back up.
-
Hello guys..
How can i reset my iphone 4s IF i forgot my restriction passcode, and apple id password AND security question answer?..
AND I also forgot the email that i used to create the apple id.. Thats why i cant reset my password using the "email authentication"...
PLEASE HELP.. Thanks... I cant use my iphone properly.. im stock with my OLD Apple id..Its simple - if you honestly cannot remember a single piece of security information associated with the account, or even the name of the AppleID itself, the only possability of help is to call Apple and ask them if there is anything they can do. There is nothing anyone here or elsewhere can possible do to help you.
Apple offers several means of ensuring you can recover an account or AppleID, but if you cannot remember a single one of those security features, then only Apple can, if at all possible, help you and only then if you pick up a telephone and talk to them.
The strong odds are that even Apple will not help you. I know that with the two step verification option, if you cannot at least remember two of the three security features used with that system, they will tell you the account is simply lost to your for good. They can only be help responsible for helping you recover information up to a point - at some point, it all comes down to you remebering at least some of your own information. -
i have forgot my iphone passcode then when i tried to restore it a pushup icon appear which says that i have to turn off find my iphone from iclould before restoring it
what should i do to recover my iphone<http://support.apple.com/kb/ht5787>
-
i cant sync my ipod touch, but i need to because i forgot my security passcode and cant get on to my ipod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
HT1212 I forgot my iphone pasword and what can i do to unlock it
I forgot my iphone password and my phone is disabled after I entered wrong passcode.What can I do to unlock it
Connect to the computer you usually sync to in recovery mode and restore the device, you'll get the option to set a new password for the lockscreen during this process:
iOS: Unable to update or restore -
Dears,
I Forgot My iPhone Passcode. What Can I Do?
unfortunately , I never connected to iTunes once we bought it and did not open icloud also.
please provide us the best and quick solution because it has all my import info and photo .
Details :
Apple : iPhone 4s
my user on this phone : [email protected] (I have 3 iPhone and 1 iPad on this user )
I appreciate your quick reply
Regards,Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
That's the only way to remove the passcode if you can't remember it. -
What to do if you forget your passcode and ipod is disabled?
what todo if you forget your passcode and ipod is disabled?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
iOS: Wrong passcode results in red disabled screen
iOS: Unable to update or restore -
What do i do if i forget my passcode and the phone disable its self
what do i do if i forget my passcode and the phone disable its self
Do as the manual instructs and restore.
iPhone User Guide (For iOS 5.0 Software) -
i have forgot my restrictions passcode and dont know what to do to restore my factory settings?
To remove a restrictions password you'll have to restore your phone as a new device without using your backup and start over. Save as much of your data as you can first (import your photos & videos to your computer, email your notes to yourself of sync them to a supported program, back up your contacts such as by syncing them with iCloud, etc.), then follow this guide to restore your phone: http://support.apple.com/kb/HT1414.
Maybe you are looking for
-
Interfacing Accounting entries to Oracle Financials
Dear Experts, We are implementing an IS-Retail project for a client. The strange part of the implementation is that the client will still be using Oracle Financials as the Finance module and SAP FICO module will be just a facilitator. Keeping this in
-
My laptop is tryingt to start up like a PC?
I have seen the fllowing messageon Wintel PCs but not on a Mac. My laptop doesnt have an drive should I can not load the system disck, looking for suggest5ion on fix. Thank you "No Bootable Device --Insert Boot Disk and press any key"
-
IMS-exception type "Other errors" is not getting triggered
Hi experts, I am trying out some scenarios in IMS. I want to check exception type- "Other Errors" which is a most generic exception type. I have tried many options like- removed country from partner id address, tried posting invoice
-
Hi Experts, I would like to know how to find out the sapbouicom (GUI) value changes for a field in SAP B1. E.g. project field in the doc header --> tab accounting and order number in the document header --> tab accounting. - in old version (2007 belo
-
OIM 11g requestDataset not reflected
All, I am using OIM 11g. I want to provide resouce attr details during provision request. I have created a dummy resource object with field name employeeid. firstname,lastname,Created a dataset as ProvisionDummyResouceDataSet.xml Dataset --> <?xml ve