Form Builder crashes while saving .fmb file when connected to db

Hi,
I am getting error The instruction at "0x679c352c" referenced memory at "0x0000001c". The memory could not be "read".
Forms version is 6.0.8.11.3 and database version is 10.2.0.3.0
I am doing the following steps:
1) Open .fmb file in forms builder
2) Connecting to database
3) Making some changes in form
4) Compiling (Ctrl+Shift+K) and generating form (Ctrl+t)
5) Saving form <--- Here I am getting the error and form crashes
If I do not connect to database then builder is allowing me to save the file
1) Open .fmb file in forms builder
2) Making some changes in form
3) Saving form (Successful)
I did some exercise just as a guess that may some part of the form is causing this error. I full expanded all components of the form i.e. blocks, canvases, triggers etc.
This exercise produced that 3 program units were giving same error while full expending those. I deleted those 3 program units and re-created them. Now it is not showing me this memory error while full expanding all program units. I can now fully expand my full form.
But I am still getting this error while saving the changes when I am connected to database.
Please help.
Regards,
Edited by: rawat75 on Sep 2, 2011 7:13 PM

Hi Experts,
We are getting the same issue. Our form builder crashes once we open our custom form
in form builder.
Server shows:-
Forms 6.0 (Forms Runtime) Version 6.0.8.28.0 (Production)
Form Builder shows:-
Forms [32 Bit] Version 6.0.8.11.3 (Production)
How to upgrade the form builder version?

Similar Messages

Muse crashed while saving my file, now the file is corrupt.

I was making some new changes to my Muse site (literally 2) and went to save it. Muse, even though it opened the file from recent sites, asked me to locate the file when I said "Save." So I navigated to where the file was saved and hit "Save" again. Muse crashed. Upon re-opening Muse it asked if I wanted to re-open the file and I said yes. I get the error "Cannot Open File" with "This Adobe Muse site cannot be opened." and no records in main.active table followed by an OK button.
So now, I am assuming I have to re-build my Muse site from scratch, or leave it unchanged on the business catalyst site. Is there any way to recover it from where it is hosted? If I rebuild it, will that cause a problem with that host space?
Ugh.

Please send me the original file (before being opened and resaved with the latest Muse). Given it's size, e-mail should likely work, but using a service such as WeTransfer, Adobe SendNow, Dropbox, etc. may be more convenient. Please send it to [email protected] along with a link to this thread.
It would be helpful if you could also send the MuseLog.txt file from your Document folder. Muse may have logged some relevant errors along the way.
Am I correct the .muse file was stored on an SMB mounted file server while being opened and worked on in Muse?
A few bits of information that may be helpful:
- The speed of Save is proportional to the scope of the changes since the last Save, thus Save is usually very fast.
- The speed of Save As is proportional to the total size of your file and currently runs fairly exhaustive diagnostics prior to the actual save and also compacts the file after the save, thus it's very slow compared to Save.
- Whenever a file is converted from an older version of Muse when you next go to Save, Muse will bring up a Save As dialog. This is to encourage you to save to a new file name, so you have the old file should you need to go back to the prior version of Muse for any reason. If you proceed to overwrite the file from the previous version of Muse, Muse should display a warning message discouraging you from overwriting but providing the choice to continue. It sounds like you never received this dialog? Regardless, overwriting should work without a problem.
- Working on a .muse file stored on a file server will be hundreds of times slower than working on the same file stored on your local hard drive. The underlying database library Muse uses for creating and accessing .muse files has not been optimized or use an a file server. It makes many many small reads and writes. These are fast when a file is stored locally, but painfully slow over a network to a file server.
Small world... more than 25 years ago I was installing Webasto sunroofs/moonroofs.

Forms Builder Crashes when converting FMT to FMB

Has anyone ever encountered this problem? I just installed 10g developer suite and am opening Forms Builder and I am using the Convert function, converting a from FMT to a FMB, and when I select the file and hit the convert button, Forms Builder crashes almost instantly saying Oracle Forms Designed has encountered a problem and needs to close.
Any ideas? Thanks!

Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production

Forms builder crashes when opening any pll

Hi,
I have gotten this problem that my forms builder crashes immediately when I try to open any pll file. (There is nothing wrong with the pll file - my colleagues can open these files with no problems on their computers). It crashes before the pll file is even remotely loaded - almost as if it encounters an error during the parsing of the pll file.
I have no problem opening and editing fmb files in my forms builder.
This problem has not always existed but it came all of a sudden one day and since its been impossible for me to open a pll file and its getting annoying :P
I run:
- Windows XP SP3
- Forms builder version info :
Forms [32 Bit] Version 6.0.8.26.0 (Production)
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Oracle Toolkit Version 6.0.8.25.0 (Production)
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #1459 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 6.0.7.1.0 - Production
Oracle Virtual Graphics System Version 6.0.5.38.0 (Production)
Oracle Tools GUI Utilities Version 6.0.8.25.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.18.0 (Production)
Oracle Tools Common Area Version 6.0.8.18.0
Oracle CORE Version 4.0.6.0.0 - Production
I tried deleting everything under D:\ORA6i where its installed and then reinstalling it - but the problem is still there.
Does anyone have an idea about what could be wrong - because I am clueless atm. - could it be some registry settings that somehow got changed maybe ?
Edited by: [email protected] on Sep 3, 2008 5:06 AM

I have encountered various issues like this with Forms 6i over time and have tried numerous things to fix them - including complete uninstall of all Oracle products and reinstalls and the one thing I found to work best was to run a Registry Cleanup tool. I had the best success with Microsoft's RegClean.exe tool (originally released as a PowerTool), but it is getting harder to find now that Microsoft has desupported it and pulled it from their web site. There are a few places where you can still get it; www.cnet.com, www.zdnet.com, and www.majorgeeks.com just to name a few. Other Registry Tools will probably work fine as well, but this is the one I have history with. I did not have 100% success by cleaning the registry, but 50 to 75% of the time it fixed the issue without having to uninstall and reinstall Oracle Forms.
Disclaimer: Please exercise caution when doing anything with the Windows Registry. The smallest change could have serious effects. Always backup the registry or create a restore point with System Restore before you make any changes to the Registry!
Hope this helps.
Craig...
If my response or someone else's response answers your question - please mark your question answered. Thanks.

Reports Builder 6i Crashes while compiling .rdf file

Hi,
Reports Builder 6i Crashes while compiling .rdf file which has output format as pdf. Does anyone knows how to fix this.
Thanks,
HC.

Hi, you may look at your report builder version because a lot of them are bugged out and do need to be upgraded to a higher level...I saw a lots of crashing when opening reports and also compiling reports that ended being an old report builder version full of bugs.

Form Builder crashes when doing a compile all(ctrl+shift+k) after adding a go_item

I am stumped. I have a procedure that is populating certain blocks based on where the cursor is in a tree. This procedure works great. My form compiles without any problems. If I then add a call to the go_item built-in and then try to compile my form, Form Builder crashes. I tried adding this go_item to the top of the procedure as well as the bottom of the procedure. This makes no sense to me. I can do a CTRL + T without any problems, but when I do a CTRL + SHIFT + K, it crashes with the following:
IFBLD60 caused an invalid page fault in module NLSRTL33.DLL at 017f:60d2352c.
Registers:
EAX=00000000 CS=017f EIP=60d2352c EFLGS=00010246
EBX=00000000 SS=0187 ESP=007e52e8 EBP=007e52ec
ECX=007e532c DS=0187 ESI=00000000 FS=10ef
EDX=00832554 ES=0187 EDI=050028e8 GS=0000
Bytes at CS:EIP:
8a 10 88 11 8a 10 41 40 84 d2 75 f4 8b 4d 14 2b
Stack dump:
00827af0 007e53b0 5da01008 007e532c 00000000 00832554 00832400 007e5814
00833c20 007e5810 00000004 00000000 00000003 0508cd14 00000000 05002e88
Any help would be greatly appreciated. Has anyone else every seen this problem.
We have had crashes in the past that were with this same DLL.
Whenever we try to do a Find and Replace PL/SQL..., we get the following:
"IFBLD60 caused an invalid page fault in module NLSRTL33.DLL at 017f:60dld397." It then lists some register stuff." We had a TAR out on this problem and Oracle was unable reproduce our problem (TAR #1420237.996).
We have version 3.3.3.0.0 of that DLL. Is it possible that we have a bad version?
null

Tina,
My suggestion might work for you.
I had similar issue. What I did was:
1. Open the form after connecting to DB.
2. Do a <Compile All> 2 times.
3. ie., First time, do a <compile all>
4. Immediately do another <Compile All>
5. Now Save and then Generate.
Just give a try, if u need,
null

Migrating Forms 61 to 10g - Forms Builder Crashing

We are migrating from Forms 6i to 10g. The application works on a HP-UX box, and since we do not have the necessary setup done in the Unix box yet, we are trying to compile the forms in Windows before-hand to see if we can pre-empt some errors.
I have written a batch command to compile the 6i forms in windows (Windows XP) by invoking the 10g Forms Builder.
While it works like a charm for most of the forms (we have around 500 forms), there are a few forms for which the compiler/builder simply crashes. The .err file created for this form has absolutely nothing, it is a 0KB file.
When I try opening such forms in Forms Dev 10g, and then compile them, the Dev crashes. It gives no indication of the error.
By crashing I mean that windows throws the error message saying "Application has to be closed. Send error report: yes/no"
Can someone please tell me if you faced such a problem, and how you went about solving it?

Try a Compile All ( Ctrl - K ), then Ctrl - T.
Not sure about XP, but in Vista, the 10g Builder and batch compiler will crash if a PLL Library is not available when the form is compiled.
Make sure the PLL Library is available, and all its objects compile in the 10g setup.
If that does not help, then try a semicolon-to-semicolon replace all, then save the fmb. Then restart the Forms Builder, and open the fmb again, and try compiling.
Here is an old link describing the issue:
Re: FMB size shrinks dramatically

Forms builder crashes

Hi All,
I have a form in a path say : "desktop\XXX\Form1.fmb". when I try to open the form using forms builder i get the error *" frm 18108 : failed to load object"*.. The object that it says has failed to load and the source containing the object are all in the same path " desktop\XXX\". If i give an ok, forms builder lists a set of .pll libraries and states that * "the libraries will be lost if changes to the module are saved" *...
All the libraries are present in the same folder as my form , "desktop\XXX\". When i try to compile the form with these issues, * forms builder crashes without any warning *. can someone guide me on how to proceed with this further???
Thanks in advance!
Edited by: 917229 on Jul 18, 2012 10:47 PM

Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production

Garageband crashing while saving

Hi all,
I was working on a track on Garageband today on my ipad when it suddenly crashed while saving. Now whenever I open it up, it goes back to that song and won't save - so I can't access all my other files! There's an awful lot of work on those files and I really want to get them back but I've no idea how. I've tried switching ipad off and back on, but that hasn't worked - and the files aren't synced up to my PC as I haven't had access to it for a while.
Is there a way to get back to the main screen on garageband? Please someone help, this is so frustrating!
Thanks
PS

Sad to say this has now happended to me twice.
Any help or ideas would be greatly appreciated.
Cheers

Grey background while saving pdf file as a ZIP in IE browser

I am getting grey background while saving pdf file as a ZIP file in IE browser like below screen shot
The pdf open properly but when I click on save button on below screen it become grey.
The file is getting saved properly.
But the same thing working fine in firefox(I will not become grey while saving)
we are using adobe 11 version.

I am getting grey background while saving pdf file as a ZIP file in IE browser like below screen shot
The pdf open properly but when I click on save button on below screen it become grey.
The file is getting saved properly.
But the same thing working fine in firefox(I will not become grey while saving)
we are using adobe 11 version.

CS Crashes While Saving

There seems to be an incompatibility problem that causes PS CS to crash while saving under OSX 10.4.11. Crash reports say Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_INVALID_ADDRESS (0x0001) at 0xfffffff4 and strange folders ( ¬∂ßå∆∂´ ) are created in Home/Preferences. Apple blames Adobe. Adobe blames Apple. Either way - we're screwed.
Any gurus out there with thoughts?

Yes lower the allocation to about 75 -80 %.
You need some memory for the system also before relaunching PS trash the settings folder to give yourself a clean start and also if you don't have another disk or partition as a scratch disk get one.
To trash the settings folder
1. Quit Illustrator.
2.Go to User/username/Library/Preferences/ Adobe illustrator CS4 Settings and trash the settings folder, the whole folder not just the contents of the folder..
3. Start Illustrator. Illustrator creates a new preferences file.

9i forms builder crashes

Hello,
Im using 9i forms builder on a XP sp1 platform. When ever I run a form Forms Builder crashes. There are no error codes or messages it just disappears. The form I was attempting to run launches and works fine but I have to re launch Forms Builder. Ive tried uninstalling and reinstalling the 9i IDS but I still have the same issue.
Has anyone seen this before?

Here's the application log:
14/07/06 8:43 AM Started
14/07/06 8:44 AM forms90web: oracle.jsp.runtimev2.JspServlet: init
14/07/06 8:44 AM forms90web: 9.0.2.0.0 Started
14/07/06 8:44 AM forms90web: oracle.forms.servlet.FormsServlet: init
14/07/06 8:44 AM forms90web: FormsServlet init():
configFileName: c:\ora9ids/forms90/server/formsweb.cfg
testMode: false
14/07/06 8:45 AM forms90web: oracle.forms.servlet.ListenerServlet: init
14/07/06 8:45 AM forms90web: ListenerServlet init()
14/07/06 8:45 AM forms90web: Forms session <1> aborted: unable to communicate with runtime process.
14/07/06 8:45 AM forms90web: Forms session <1> exception stack trace:
com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpIOException: Connection reset by peer: JVM_recv in socket input stream read
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.EvermindServletInputStream.read(EvermindServletInputStream.java:211)
     at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
     at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:243)
     at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)
14/07/06 8:47 AM forms90web: oracle.forms.servlet.ListenerServlet: destroy
14/07/06 8:47 AM forms90web: oracle.forms.servlet.FormsServlet: destroy
14/07/06 8:47 AM forms90web: 9.0.2.0.0 Stopped
14/07/06 8:47 AM Stopped (JVM termination)
14/07/06 10:05 AM Started

While saving a file, I have converted all my files to Pdf. The only way to restore previous is to delete Adobe. Does anyone have a soution?

While saving a file, I have converted all my files to Pdf. This made everything inaccessible, even Explorer. I had to delete Adobe to get back to some of the previous files. I tried to restore system to previous, but I kept getting a pop up message that said I did not have enough shadow space. Does anyone have a solution? Greatly appreciate your help.

Application, file icons change to Acrobat/Reader icon

I can't create a new tag while saving a file in Yosemite.

The title pretty much says it all :-) As I try to type in a new tag while saving a file, the curser just blinks, and doesn't respond. I can't create a new tag. I can click on existing tags, and they get added to the file, but the support page on tags says:
To add a tag:
Click on a recent tag that appears in the menu to link it your document. You can even add multiple tags.
Click “Show All…” to see the all of the tags you have created. Then, click on a tag to add it.
You can also add tag by typing. As you type in the Tags field, you’ll see matching suggestions from your existing tags.
To add a new tag, just type it in the field.
New tags you create automatically appear in other locations where tags are visible, such as in the Finder sidebar.
The fourth bullet is the one I'm referring to. I think this might be a bug, but I can't find a way to report it. If it's not a bug, I would really appreciate some guidance.
Here's some system info:
MacBook Pro (15-inch, Early 2011)
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B27
SMC Version (system): 1.69f4
Yosemite version:10.10 (14A389)
Thank you very sincerely for your time,
Chris

What sort of file(s) are you trying to tag while saving?
Have you tried saving the file first, then tagging it/them afterwards?

To set an error while saving the order when the item categor changed in CRM

Hello SAP Gurus,
As per our current system set up, whenever the order created in CRM once replicated to ERP should not change the item category in CRM .If the item category is changed( allows the system) and saved, it gives an error as u201CItem category should not be changedu201D. We have been encountering this type of issue since long back
To avoid this type of issue, an error should through while saving the order when the user changes the item category in CRM.
Can someone help me to achieve this.
Thanks in advance.
Cheers
Sreedhar

Sreedhar,
Can't you control it by Item Category determination?
JD

Form Builder crashes while saving .fmb file when connected to db

Similar Messages

Maybe you are looking for