Form Loads - Focus on Wrong Element

Good day. This is a cross post but I'll try to put better detail here.
I have a form that loads empty. I then grab data from the DB and populate the form. I have 3 radio buttons that are part of the radio group. I set one of these after gathering data by calling setSelected(true).
The focus (rectangular dotted line) does not move to the element that is selected. I have tried requestFocus() but it does not change. The focus moves when I press tab. It seems like the focus is set to the first focusable element.
What do I need to do to solve this? Should I try changing the order of focusable elements to have my selected item as the first element?
BTW - I have also tried the following to correct this.
doClick()
grabFocus()
Thanks

OK. I am now working woth a non modal dialog. I do the following.
Construct
Show
Call DB
Update radio button
request focus for the selected button
The first button (non selected) is still focused.
Help please?

Similar Messages

  • Why does my form load in the wrong position on some pages?

    I have a contact form on the Master Page of my site which periodically loads off set to the left on some pages.   It doen't always do it and it only does it on some pages, which makes no sense as it's a Master Page element.
    On the below page the form is in the middle of the black strap where it is ment to be -
    http://www.iheartmylife.com/compliments.html
    On the below page it has loaded off set to teh left -
    http://www.iheartmylife.com/index.html
    Can anybody help me figure out why this is happening?
    James

    Hi James,
    I've updated Emily about this issue via case. Please test the proposed solution.
    Regards,
    Aish

  • How  to set focus on an element inside a datatable on load

    How to set focus on an element inside a datatable on load

    Check out https://blogs.oracle.com/groundside/entry/ever_wondered_how_uncommitteddatawarning_works and
    Decompiling ADF Binaries: Checking for dirty data
    Timo

  • How to set a form field focus

    Is there a simple way to set a form field focus... so basically on load the field focus is set to a specific field?  I know how to write it in javascript but was wondering if there is a simple way to basically select the field and click a button or two and get the same result?  thanks.

    The script for that is extremely small and very simple.
    In all hosety, it would probably take longer to edit it through the DW interface than by hand.
    Add this after your form and change the bold areas to the name of the form and the name of the input you want to have focus on...
    <script type="text/javascript" language="JavaScript">
    document.forms['myform'].elements['mytextfield'].focus();
    </script>
    Those two things are the only items that will ever change.

  • An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

    Hi Everyone,
    I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load.  The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
    fine the rest of the day, oddly enough. 
    A few things about my form:
    1). It is web enabled
    2). The form submits to a form library on the SP server
    3). I use the UserProfileService data connection in the form to auto-populate a few fields
    4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
    5). The form has been working fine until a few days ago
    I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped.  Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
    have the service account information.
    Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
    Schema file was already loaded: BuiltInActiveXControls.xsd
    FormServer Partial Trust - Proxy operation invoked in the SHIM process.
    FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
    Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
    The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
    Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

    Hi B.,
    You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
    If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
    Hope this helps.
    Daniel Christian (MCTS)

  • InfoPath form load rule is not checking all the rows in form library

    Hi,
    Requirement:
    We have a form library named "HR Annual Review". In the InfoPath form we have two buttons "Save" and "Submit". User is allowed to Save multiple times and only once using Submit button. The file name of form library "HR
    Annual Review" will be stored in the format “<username>+<mm>+<dd>+<yy>.xml”. Say for example, an user named Mike Walt submitted a form then the file name will be as “MikeWalt012314.xml”. If the same user (Mike Walt)
    submits the form and tries to open the form for subsequent edit, then we need to show a view which has an error info saying “The Appraisal is already submitted for the current appraisal cycle”.
    Solution we tried:
    To achieve the above requirement, we tried using InfoPath Form Load and add a rule to check whether the combination of current user name and the year already exists in the filename column of the form library. But the rule we applied is not checking all the
    rows in the form library. The rule is always checking the first row of the form library.
    What we need:
    We need the validation using InfoPath rule or some other way/solution to check whether the combination of current login username and current year file already exists in the form library.
    Thanks in advance.
    Srivignesh J

    Hi Srivignesh,
    Submit button Uses the Main Data connection to submit the data to the list. This is what you are using and naming the file in the format. You can create secondary data submit that will update the exiting item in the list. With this, you don't have to create
    any rules to check all the rows which is also not possible in OOB InfoPath.
    Once you have the two data connection, hide the toolbar from the form and display these two on the button. For The Submit button, apply the rule to hide the button if created by is not empty. For Save button, apply the rule to hide the button if Created
    By is empty. This way, when a new form is created, you will see the Submit button, and when the user have to update the form, they will see Save button. Hope it help.s
    Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

  • Loading AVI file. into Elements 8

    I am using Primier Elements 8 on a PC running Vista.  I am trying to load and edit  a 1.9 G AVI file that contains video and audio in Elements 8.  When I load the file into Elements I get a video track that has the video but the  audio track that does not have any audio. Any idea as to what is causing the problem and what I need to do to fix it?
    Thanks

    Read Bill Hunt on a file type as WRAPPER
    http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en

  • Infopath form load rule not working in browser forms but works on Client

    Hi
    I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
    It works when I open it on client, but on the browser it fails.
    Have anyone encountered such an issue.

    Check below:
    http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
    Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
    Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
    http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
    if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
    This look like a bug. Here are the steps below that will lead you to the bug:
    Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
    Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
    Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
    Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
    Open and Save category, click the Rules button and add a new rule in it and save it.
    Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
    Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
    If this helped you resolve your issue, please mark it Answered

  • Multiselect values in "current values" on form load

    Hi,
    I have a multi select field for 30 roles in the form. Now, i want 28 roles to appear on the right hand side (current Roles) on form load and the rest 2 to appear under available Roles.
    How can i do this? Please let me know.
    Thanks,

    Here u go..
    <Field name=':variables.currentroles'>
    <Display class='MultiSelect'>
    <Property name='title' value='Roles'/>
    <Property name='selectedTitle' value='Selected roles'/>
    <Property name='availableTitle' value='Available roles'/>
    <Property name='allowedValues'>
    <ref>:variables.unassignedroles</ref>
    </Property>
    <Property name='allowOthers'>
    <Boolean>true</Boolean>
    </Property>
    </Display>
    </Field>

  • How to check table is NULL or not when a form load?

    How to check table is NULL or not when a form load?
    I want to make the form when it load it check the data in table, if there are no data in table other form will be load.
    Sorry for bad English... 

    Maybe you can do this in form1's Form_Open event:
    if dcount("*", "table1") = 0 then
      Cancel = True
      Docmd.Openform "form2"
    end if
    -Tom. Microsoft Access MVP

  • How to set focus on UI Element

    Hi All,
    I am using the below code to set the focus on the first row of the table given in the link  [How to set focus at UI element ? ] on enter of an event.
    data: lr_elem type ref to if_wd_view_element.
    lr_elem = view->get_element( <ID of the Link to Action field>).
    if lr_elem is bound.
    view->request_focus_on_view_elem( lr_elem ).
    endif.
    I am getting "Cannot use NULL reference as object error at view".
    Can you please tell me how to get the reference of the "view".
    Thanks
    Praveen

    >
    praveenkumar_81 wrote:
    > Hi All,
    >
    > I am using the below code to set the focus on the first row of the table given in the link  [How to set focus at UI element ? ] on enter of an event.
    >
    >
    data: lr_elem type ref to if_wd_view_element.
    > lr_elem = view->get_element( <ID of the Link to Action field>).
    >
    > if lr_elem is bound.
    > view->request_focus_on_view_elem( lr_elem ).
    > endif.
    >
    > I am getting "Cannot use NULL reference as object error at view".
    >
    > Can you please tell me how to get the reference of the "view".
    >
    > Thanks
    > Praveen
    Hallo Praveen,
    have you controlled that id of the Linktoaction ? there you made error.
    See it in the ViewElement designer .
    should be something like this
    lr_elem = view->get_element( 'LTA_name ' ).

  • Is it possible to do focus stacking in elements 11

    Is it possible to do focus stacking in elements 11 and how do i do it ?

    Hi marcuso46392578,
    Please find this video for focus stacking:
    Focus Stacking in Photoshop Elements - YouTube
    You can also see this blog: Focus Stacking in PSE 11/12 - Elements Village
    Regards,
    Sandeep

  • How do I show the focus point in Elements 12?

    How do I show the focus point in Elements 12?  There are times when displaying the camera focus point(s) in either the organizer or the editor would be very helpful in analyzing pictures.  Is there a way to do this?

    As far as I know this is a feature specific to a given camera manufacturer. Only their proprietary editing softwares can interpret the proprietary metadata...

  • Display a login popup at (browser-enable) form load.

    Hi,
    Help, please.
    I need to pull the employee’s information from a SAP Web Service but in order to do that I need to pass two parameters: UserID and Password.
    What I want to do?
    I want to display
    a login popup when the browser-enable form load. Something like this:
    How can I do that?
    I’m open to ideas and suggestions. I need some guidance, please.
    Thanks in advanced

    Hi Efebo,
    To display a login popup in the InfoPath form, I recommend to add a button in the form and click the button will popup the login form.
     Please follow the link below for detailed code samples:
    Opening a SharePoint 2010 Modal Dialog Box from an InfoPath Form:
    http://msdn.microsoft.com/en-us/library/ie/hh278954.aspx
    Here is a link about consuming SAP Enterprise Services in a Microsoft Office InfoPath Form for your reference:
    http://www.doc88.com/p-64981574795.html
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • I filled up the form to buy Adobe Premiere Elements 13 from Kolkata, India, but i cannot buy- Why?

    i filled up the form to buy Adobe Premiere Elements 13 from Kolkata, India, but i cannot buy- Why?
    i use Windows 8 and i am already using the Trial of the software.
    contact in [email protected]

    i filled up the form to buy Adobe Premiere Elements 13 from Kolkata, India, but i cannot buy- Why?
    i use Windows 8 and i am already using the Trial of the software.
    contact in [email protected]

Maybe you are looking for