Format qu

hi there,
hope someone can help, i recently formatted my creative muvo tx fm 256mb mp3 player as i could not get rid of a corrupt file which was on it. this has obviously left me with no explorer etc; to access the files, mp3's etc;. i thought this wouldnt be much of a problem, as i thought i could have downloaded and installed said software back onto the hardware, but to no avail.
hope someone can point me in the right direction to solve this problem, i.e. any links that would point me to the correct software to rectify the system.
p.s. when i switch on the mp3 player, a message displaying "file system error" is the only message apparent.
if there is any other information needed to help you help me please contact me.
thanks.

nice one!!!!!!
thanks for the help mate. it worked a treat, up and running again

Similar Messages

  • I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

    Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
    So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
    so please guys help me how can i get back data from bitlocker protected drives.
    please please help me.

    Hi,
    I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
    BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
    that you store the recovery information in AD DS or in another safe location.
    Please refer to the link below for the statement:
    http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
    Roger Lu
    TechNet Community Support

  • IPod not recognized by iTunes, Windows Vista prompts to format iPod drive

    Hello,
    I have IPod 80GB which I rarely use. Yesterday  when I wanted to use it, I went to add a few new audios to it, connected to my computer and launched iTunes. I added the folder which contained audios to iPod, synced it and wanted to disconnect, but iTunes took excepionally long to finish.
    When I clicked on 'eject' icon, I go a message saying 'some files are being accessed' or something like that. I waited for 5-10 minutes but it won't finish up, so I unplugged my iPod as I had to leave.
    Later when I wanted to play, I noticed I had no audios in iPod at all.
    Later when I got home, connected it again to computer, launched iTunes, but iTunes won't show iPod. A few minutes later, windows (Vista) prompted a message saying that it needs to format N: drive (which was iPod).
    I tried diagnostics on tis site, restarted/reset iPod etc, but it didn't solve the problem. I removed and reinstalled iTunes as per instructions, still no use.
    Then I called Apple support Canada and the guy on the phone said I need to pay to get support. He said he'd send me some documents via email which would solve the problem and hen I wouldn't have to pay. I gave him my email address, but so far I have recieved no emails from him. I have checked my spam and junk folders, just in case, but nothing there.
    Anyhow, this issue came up all of a sudden, there has been no physical damage to iPod, I barely use it. maybe for few minutes here and there a month. I have had numerous problems in the past every time a new iTunes update come, it always creates problems. Last year I spent many hours after iTunes update make iPod unrecognizable so I had to go back to older version, then upgrade etc. I don't remember how I solved the issue, but it took a while and it turned out to be something of iTunes version issue.
    I wonder if this is another of such issue. I hope its not a hardware issue with iPod. I'd appreciate any help.
    Thanks

    I just got Vista too and it does recognize my ipod, but itunes can't find a lot of my songs on the computer. I tried to uninstall itunes and reinstall it thinking that it would seach for new music when I installed it again but nothing new happened when I did that.

  • Format C drive, what steps to take for retaining all data of iTunes?

    Hello
    I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
    Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
    What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
    Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
    Thanks in advance

    This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following.  I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library.  You now have a "split library" where:
    E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
    C:\Users\your user name\Music\iTunes contains the following folders and files:
    Album Artwork (folder)
    Previous iTunes Library (folder)
    iTunes Library Extras.itdb (file)
    iTunes Library Genius.itdb (file)
    iTunes Library.itl (file)
    iTunes Library.xml (file)
    I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
    Before you change anything else, exit iTunes.  Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder.  You should now have this:
    or something very similar.  Now restart iTunes while holding down the SHIFT key.  You will see this dialog:
    Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above.  Select the iTunes Library.itl file and click OK.  iTunes will load - check that everything you expect to see is there.
    You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them.  You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations).  As tt2 suggested in his response, before you go any further:
    Make a backup of your new portable library to another device.
    De-authorize your iTunes account.
    Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.).  Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
    Once you've reformatted the drive and reinstalled Windows, install iTunes.  As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

  • Iomega external hard drive either 'not found' by Time Machine or is now in 'read only' format

    I don't know what's going on with my iomega external hard drive.  Sometimes the HD is recognised by the computer; other times it isn't; if it isn't I can restore to an earlier back up via Time Machine app; but it's like the disk isn't writable.
    Ten days ago, I had trouble backing up my iMac using Time Machine.  After turning it off and restarting my external hard drive, it backed up successfully.
    However, today I am trying to back up my files, and TM tells me it can't find the external hard drive.  Nothing has changed -- I have been out of town this past week -- but somehow my HD now seems to be in 'read only' format.  It does turn on, and I could restore my computer to an earlier back up.
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    Annoyingly, despite my HD not showing in Finder or on my Desktop (as it usually does), when I simply turn it off I get that warning message "The disk was not ejected properly".
    Have tried verifying and repairing using Disk Utility, to no avail. 
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.  I'm guessing this would wipe the disk clean and I'd have to create the initial back up image all over again -- I'm reluctant to do this since this HD is my only back up and if it all goes tits up I'll be up that famous creek without a paddle.
    Thoughts, suggestions, input all welcome and deeply appreciated -- thank you!

    fzgy wrote:
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
    That will erase it.  See Time Machine - Frequently Asked Question #5.
    It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
    I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast).  Use it for secondary backups, per FAQ #27.   If it has failed, get a second new one for secondary backups. 

  • I have formatted my SSD and hard drive.... I am running a clean install from disk of 8.1 pro. I cannot determine if it is a compatibility

    issue or hardware issue. I had run a memory test and scan disk for bad sectors from the bios. As administrator, I enabled automount  in diskpart to allow windows to assign a drive name. 
    From the bios, I can see both drives and only the ssd. I have not pinpointed when the harddisk is unmounted. It is formatted as NTFS. I can hear it unmount either during boot or upon waking from sleep mode. The bios sees no bad sectors nor does windows.
    However, when I had the intel compatibility software installed, my hard drive never mounted. I did a restart and inorder for windows to see my hard drive. I disabled the intel software for the 4th gen i7 processor. This problem is happening less often. I do
    not think I have solved the problem. Intel or Windows... I think a bit of both. 
    If there is a software patch, please guide me to it. I am in school and use my laptop ALL the time. I believe it is a compatibility issue. I have attached this from searching intel's site for downloads and windows is up to date. 
    I am quite concerned because I can hear my harddrive unmount. It is labeled as healthy NTFS partition. I have checked for hidden volumes and done everything I know to do to check the integrity of the hardware as administrator. I have searched microsofts
    libraries and forums and have done everything I can find as suggestions. 
    I have checked for malware, viruses, etc. My only clue this is going to happen is the hard disk spins up and I hear the fan, then I hear it unmount the drive. Of course, after unmounted there are other issues which I have ruled out as the cause of the problem.
    Basically, I am experiencing a lack of swap space after my hard drive unmounts.
    Any suggestions, are welcome! I would really like to know if this is a known windows issue. I should not have to disable intel's processor software. I paid for the features of the i7 and would like to utilise the processor.

    Hi,
    According to your descriptioin, I don't think this is system problem, it should be Intel driver problem. It would be contact Intel to confirm this issue whether this is their driver problem.
    Roger Lu
    TechNet Community Support

  • Format and partition external drive if you want dual use Mac / PC

    I had purchased from the Apple store in France a portable hard drive Iomega eGO USB 2.0/FireWire ov 250 Go capacity (P/N 31713900; Model: RPHD-C; S/N: FEAJ02011V)
    Originally formatted HFS+, it would mount on any of my Mac desktops with Firewire, easily on the iMac using USB and with great difficulty on the iBook with the two USB plugs (together). It did not mount on any windows PC I had used for tests (so reformatting it FAT(32) or NTFS was *not an option).
    I had reformatted it FAT32 using the iMac under mac OS 10.5 for use on multiple computers including Windows PC's. The drive would now accept to:
    Mount on the iMac and iBook using Firewire
    Mount on the iMac using USB, but it will NOT:
    1 - Mount on the iBook using USB, nor
    2 - Mount on any Windows PC using USB
    The solution was found at the office with our IT helpdesk.
    Whether I format it FAT 32 or NTFS (using the Paragon NTFS for mac OS X 10.5) on my iMac under OS 10.5, including when I do the same on another external drive than the Iomega, the PC would not recognise it while it would always mount on a Mac and it was even impossible on the PC to reformat it. The solution is (at least in windows world), you need to (1) format the drive, AND (2) partition the drive, even if this involves creating a single partition. Using Disk Utility of the Mac, I had only formatted the drive and not partitioned it into a single partition and Disk utility did not request that from me. The drive as prepared was perfectly usable on any Mac anyway.
    The cure was to go back to the imac which had formatted it, mount it (it mounts), (1) reformat and (2) partition, using a single partition.
    Then, the drive would instantly be recognised on the PC as a F drive, whether under FAT 32 or under NTFS.
    The blame is in me and on the Apple Drive utility which did not help me (trust it would have been worse in windows world, but this is a bad mark on disk utility)
    My suggestion to Apple would be that Disk Utilisty should tell us, once we have formatted a drive (HFS+, FAT 32 or NTFS using Parangon) that we are not done yet and still must create the partition(s), even if we only need one partition.
    HTH

    Hi Michel-Ange
    You are talking to other user like yourself here and not Apple. If you wish to make a suggestion to Apple, I suggest you do it at this site - http://www.apple.com/feedback/macosx.html
    Allan

  • Data Recovery from Partitioned and formatted Bit Locker Encrypted Drive

    Recently because of some issues in windows 7 installation from windows 8 installed OS. it was giving as the disc is dynamic windows can not be installed on it. so at last after struggling hard no other solution i partitioned and formatted my whole
    drive so all data gone included the drive which was encrypted by bit lockers.
    For recovery i used many software such as ontrack easy recover, get data back, recovery my files professional edition but still i couldnt able to recover my data from that drive. then i found some suggestion Using CMD to decrypt my data first 
    http://technet.microsoft.com/en-us/library/ee523219(WS.10).aspx
    where it shows it successfully decrypt my data at that moment my drives were in RAW format excluding on which windows is installed and then in CMD i check Chdsk which also shows no problem found. but now problem is still i coudnt able to recover
    my data then i format the drive D and again tried to recover data using above software after decryption still no result. 
    Now i need assistance how i can recover my encrypted drive as it was partitioned and also formatted but decrypted also as i have its recovery key too. thanks

    Hi ,
    I am afraid that we cannot get the data back if the drive has been formatted even if use the
    BitLocker Repair Tool.
    You’d better contact your local data recovery center to try to get data back.
    Tracy Cai
    TechNet Community Support

  • FORMAT WINDOWS 7(64) BY MISTAKEN NOW HOW I RECOVER ERASED DATA WHICH I HAD LOCKED DRIVE BY BIT LOCKER

    i'm using windows 7 (64 bit) but experiment to install mac on my PC (i 5-4 GB ddr 3-500sata sea gate).by mistaken its format my whole hard drive which is 500 GB sea gate sata.after this i'm confused and install windows 8.1 and then again i had install windows
    7 (64 bit) now after 2 time partition erased i'm trying to recover my data 50 percent data but which drive i had locked with windows 7 bit locker it cant recover any thing I've remember its password.
    any one help me to get back my data from this locked drive ?
      

    RB
    If the drive was both formatted and bit locked you cannot recover your data.
    Wanikiya and Dyami--Team Zigzag

  • Time From field is not getting displayed in correct format in Activities

    Hello Experts ,
    We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of  getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
    Can any one suggest how to display in correct format ?
    Regards
    Vinayak

    Hi,
    Its an SAP Product error.
    Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
    - Bobby

  • How to provide text formatting options to user from a text field

    Hi,
    My requirement is - in the interactive form, a comments field needs to be provided where user should be able to enter text with formatting options like
    Headers
    indentations
    bold/italic
    bullet points and numbers
    Once user enters the formatted texts in a text field, data needs to be displayed/printed in the same format. Could you help me on how to provide these formatting options to the user for a particular text field?
    I understand that once I define the text field with format XHTML (with RTF), user formatting can be captured and displayed in the same way. But I am not sure on how to provide the formatting options for the text field.
    Thank you,
    Madhu

    Hi,
    if you select a text field for Rich Text and the press Ctrl + E you'll get a bar for all available text formatting options in Acrobat/Reader.

  • Text formatting options

    Hi,
    Is there a list somewhere which outlines more text formatting options than what is shown in the FAQ?
    In particular I'm wondering how to make text that does not suppress white space other than using the "code" tag.
    Also, the insert link option a shown above does not seem to work, or am I just stupid?
    Thanks.

    Dude wrote:
    Also, the insert link option a shown above does not seem to work, or am I just stupid?That one has not been working for a couple of years or so. There should be a thread about it in this forum.
    Instead, I'm using [ url=<insert link here> ] text [ /url ] (without the extra spaces in tags). Normal html link tag might work as well.

  • Brand New MacB Air and i haven't been able to get passed the format which has had to be done twice because, I have a French Numeric Keyboard and Language in English.  The minute I type in my password, the keyboard gives me letters that i did NOT type.

    I live in Switzerland and can only buy a Mac Air with a French or German keyboard, no chance to buy an English keyboard Mac here,.  When setting up  I chose the French numerique keyboard, although there are two choices French or French numerique.  I put in my language as English.  When all was set up I came to the start page and had to put in my password, by the grace of g....I just happened to see the first letter I typed before it turned into a dot.  My password which was supposed to start with the number 2 showed a french e with accent before it quikly became a dot.
      Because of the dot system, this meant that I had no clue what the keyboard was typing as my password ...........and true enough my password was not accepted despite my trying all combinations.  I have had to reformat twice now thanks to Apple Chat and both times my password was not accepted.  I am in the process of formatting it again, this time on my own.  If the Start page does not accept my password again this can only mean that the Mac left the factory with faults.  I could not be more disappointed with the money spent and the time and trouble that Apple Chat and I have spent in trying to correct a brand new out of the box Mac.  I have a cheap Toshiba laptop also with a french keyboard and english language which gave me no trouble at all.  I am not impressed with the so called King of computers!  First of all the dot system is daft.  People want to be able to see and confirm their passwords before they are set for good.  Second,  this problem is going to give me a lot of grief.  Switzerland business is not renowned for its after sales service or the time it takes to do repairs.  When I had an issue with my Vaio laptop which was still under warranty, they kindly picked it up from my house, repaired and promptly returned it.  How's that for good proper service.

    i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
    do a true clean install
    reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
    at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
    exit disk utlity
    at menu, choose install OSX
    this time, when it asks for a password just hit continue, it will let you complete without a password
    you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

  • Problem with Date formatting

    Hi Tim,
    I am facing some issues with formatting the date using XMLP. The following is the sample XML data file i am using:
    <LIST_G_HEADER>
    <G_HEADER>
    <QUOTE_HEADER_ID>1455</QUOTE_HEADER_ID>
    <QUOTE_NUMBER>2027</QUOTE_NUMBER>
    <QUOTE_VERSION>1</QUOTE_VERSION>
    <QUOTE_NAME>Test GM Report - Rabindra</QUOTE_NAME>
    <SOURCE_NAME>Fletcher, MR. Paul</SOURCE_NAME>
    <QUOTE_DATE>27-OCT-2005</QUOTE_DATE>
    <CURRENCY_CODE>GBP</CURRENCY_CODE>
    </G_HEADER>
    </LIST_G_HEADER>
    The formatting i use for my date field i.e <QUOTE_DATE>, ends up either with NO formatting or giving me an error "[010906_114656657][][ERROR] Invalid XSD string: 27-OCT-2005 (XMLP Template Viewer)". The default formatting available with the form field dialog box (MS-Word) feature also doesn't work.
    I have the following formatting for this field in the form field:
    <?format-date:QUOTE_DATE; 'MEDIUM' ?>
    When i read the user guide, it reads that the date should be in the canonical format i.e: YYY-MM-DDThh:mm:ss+HH:MM
    However i am not getting the date from the base table's in this format. Is the error happening due to incorrect format or is there some other reason behind this? Please let me know, how can i overcome this issue.
    Thx,
    Nitin

    As i mentioned in another thread
    substring function and date format
    Please use this standards
    <?xdofx:expression?>
    for extended SQL functions or
    <?xdoxslt:expression?>
    for extended XSL functions.
    Use like
    <?xdofx:rpad(LAST_NAME),30, ’x’)?>
    <?xdofx:Instr(’abcabcabc’,’a’,2))?>
    <?xdofx:upper(char)?>
    <?xdofx:lower (char)?>
    <?xdofx:greatest ( expr [, expr]... )?>
    ETC.....

  • Export to excel formatting

    I'm working on a quote report which has narrative sections as well as a table. I can get the report to look great in the application but it has formatting problems once exported to excel.
    In one of my narrative reports I have a simple table with a few columns. Once exported to excel the first narrative column is the entire width of the report table below it. The large cell row is also merged cells in excel.
    Is there anything that can be done to help force how the report goes into excel?
    I have also tried creating the report in a narrative html table to export into excel.

    Can someone explain if they face similar issues as I am when you export a report output on portal to Excel it takes huge size. I assume it because of all the color formatting etc. but is there a way to reduce this size. 3.5 Bex Analyzer same report takes only 3 MB while if I export it from portals it takes 32 MB.

  • Format on HTML report different than on PDF view

    I have a Quote report based on Product Revenue that we send to our customers. I have it formatted nicely when initially displayed and also when viewed with the Printer Friendly HTML option. But... when I view it as a PDF, it is not even close.
    The layout of the report uses a narrative section with HTML formatting to get the elements to align correctly, per the documentation. The HTML I use is as follows:
    Narrative Section formatting code:
    <table width="600">
    <tr><td colspan=3>  <div align="center"><b><font size="5" face="Times">
      @10</font><br>
    <font size="4" face="Times" >  Prepared Exclusively For: @8</font></b>
    </div></td>
    </tr>
      <tr> <th width="250"><div align="left">Quote Details</div></th> <th width="50">   </th><th width="300"><div align="left">Sales Manager Info:</div></th></tr>
    <tr>
    <td>Quote ID: @9</td><td> </td><td>Name: @16</td></tr>
    <tr>
    <td>Quote Date: @15</td><td> </td><td>Email: @17</td>
    <tr><td>Quote Expiration: @14</td><td> </td><td> </td></tr>
    <tr><td colspan=3><div align="center"><b>Phones - Cell:</b> @18, <b>Work:</b> @20, <b>Fax: </b> @19 </div></td></tr>
    </table>
    Notes: @11Is there another way to get the HTML view and PDF view to look the same (or at least close)?
    (more details and examples here --> [HTML and PDF Views|http://crm.nurserysupplies.com/images/CRM_HTML_and_PDF_views.doc])

    To date, this is considered a product limitation. I just talked with an escalation manager regarding this very issue, and he offered to bring this up with the product managers/engineers on 5/15/09. I recommend escalating this issue and asking your escalation manager to do the same.
    We are trying to create a customer contract based on Opportunity information.
    The best way to accomplish what you are trying to do is: Click Printer Friendly > Click HTML > Click on File - Print in browser window > Either print to PDF using a pdf printer from adobe or the cutepdf or print a hard copy.

Maybe you are looking for