FORMAT WINDOWS 7(64) BY MISTAKEN NOW HOW I RECOVER ERASED DATA WHICH I HAD LOCKED DRIVE BY BIT LOCKER

i'm using windows 7 (64 bit) but experiment to install mac on my PC (i 5-4 GB ddr 3-500sata sea gate).by mistaken its format my whole hard drive which is 500 GB sea gate sata.after this i'm confused and install windows 8.1 and then again i had install windows
7 (64 bit) now after 2 time partition erased i'm trying to recover my data 50 percent data but which drive i had locked with windows 7 bit locker it cant recover any thing I've remember its password.
any one help me to get back my data from this locked drive ?
  

RB
If the drive was both formatted and bit locked you cannot recover your data.
Wanikiya and Dyami--Team Zigzag

Similar Messages

  • My new imac doesn't booting even my windows also giving blue screen error how i recover my datas please help me guys

    my new imac was doesn't getting booting into osx mountain lion 10.8 and also in windows when i try to click on option key it shows only windows parition if i select that windows os getting bluescreen error this problem caused by when i'm using imac suddenly power went off so after that i'm trying it's not booting so if any option give solution for to recover the datas stored in imac please

    A new Mac comes with 90 days of free tech support from AppleCare.
    Why not make use of it?
    1-800-275-2273
    Best.

  • On windows 7 i had mozilla, which i sync my data with my account now i've win 8 how to recover sync data i also forgot recover key but i do remember my id & p/w

    i am using windows 8 about 2 or 3 days ago. its good but before that I've to use windows 7. on windows seven i had installed Mozilla and i have many bookmarks on my bookmarks toolbar and at that time i was come to know that sync is useful thing so i made up a account and sync my browser data and i also got the key that time but when i install windows 8 i lost all the data and i again installed the Mozilla but i don't have the recovery key instead i do remember my id and password how can i recover my previous data which i had on windows 7's Mozilla browser ?

    Sorry, the Recovery Key is the encryption / decryption key for your data. Without that Key your data is useless.

  • I just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    i just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    Trash the copy of the library you just moved. Then Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    But do you want to have two iPhoto Libraries? Why not just use the one on the External?

  • I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. Any ideas on how to recover my data?

    I have a WD Passport HD attached to my Mac. When it was last connected it went into sleep mode and ran out of battery. Now I cannot find my HD in Finder and Disk Utilities is telling me it cannot repair the HD. I can see the HD but the volume part is greyed out. Any ideas on how to recover my data?

    There are other methodologies of scanning a HD
    which involve data extraction, but loss of metadata is often the result if the directory is corrupt.
    Metadata is the info on what the data IS. 
    Like having all your papers thrown in the air, its all there, but just a giant mess. 
    This is why you always always must have several external HD redundancies of your data.  One isnt enough, neither is two really.
    see here, and dont let that happen again>
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    Was that your only copy of your priceless data?  Just that one external HD?

  • HT204053 i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card

    i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card and trust me all my friends are regretting buying phone because of this problem.Kindly help.Cant it can be deducted from our mobile charges?i would be much easier then

    You can buy apps using iTunes Gift cards without needing to register your debit card.
    http://store.apple.com/us/personalize/itunes

  • How can I erase deleted items from the hard drive?

    How can I erase deleted files from the hard drive?  Will my machine run faster?

    If you've already deleted the files and emptied the Trash they are already, in effect, erased. At least the disk space they occupied is now available.
    To be able to offer help we need more information about which Mac you have, which OS you are running, how much RAM you have installed, how much hard disk space you have available, etc.
    Go to the Apple Menu>About this Mac - copy and paste the contents of the report here (deleting the serial number of your machine). Once we have that info, I'm sure someone will have some suggestions.

  • How to download the data which is in the table?

    how to download the data which is in the table?
    every field data in the table i want to download and once the download is finished then i have to set the flag as 'download is finished ' as one field in table?
    can any one help me in this.
    Phani.
    Edited by: phani kumarDurusoju on Jan 9, 2008 6:36 AM

    One way is to Download the data Directly from the database table using the path SE11->Give table name ->Execute -> system ->List ->Save ->Local File
    There u can downlaad the data .
    The ither way is to use the code
    The Following Code will be helpfull to You
    Data :ITAB  TYPE TRUXS_T_TEXT_DATA,
            FILE  TYPE STRING.
             C_ASC     TYPE CHAR10   VALUE 'ASC',
    DATA: L_STATUS TYPE C,
           L_MESSAGE TYPE PMST_RAW_MESSAGE,
           L_SUBJECT TYPE SO_OBJ_DES.
    DATA: L_FILELENGTH TYPE I.
      PERFORM download_to_pc
                  TABLES
                     itab
                  USING
                     filename
                     c_asc
                     c_x
                  CHANGING
                     l_status
                     l_message
                     l_filelength.
    FORM DOWNLOAD_TO_PC TABLES   DOWNLOADTAB
                        USING    FILENAME
                                 FILETYPE TYPE CHAR10
                                 DELIMITED
                        CHANGING STATUS
                                 MESSAGE TYPE PMST_RAW_MESSAGE
                                 FILELENGTH TYPE I.
      DATA: L_FILE TYPE STRING,
            L_SEP.
      L_FILE = FILENAME.
      IF NOT DELIMITED IS INITIAL.
        L_SEP = 'X'.
      ENDIF.
      STATUS = 'S'.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          FILENAME                = L_FILE
          FILETYPE                = FILETYPE
          WRITE_FIELD_SEPARATOR   = L_SEP
        IMPORTING
          FILELENGTH              = FILELENGTH
        TABLES
          DATA_TAB                = DOWNLOADTAB
        EXCEPTIONS
          FILE_WRITE_ERROR        = 1
          NO_BATCH                = 2
          GUI_REFUSE_FILETRANSFER = 3
          INVALID_TYPE            = 4
          NO_AUTHORITY            = 5
          UNKNOWN_ERROR           = 6
          HEADER_NOT_ALLOWED      = 7
          SEPARATOR_NOT_ALLOWED   = 8
          FILESIZE_NOT_ALLOWED    = 9
          HEADER_TOO_LONG         = 10
          DP_ERROR_CREATE         = 11
          DP_ERROR_SEND           = 12
          DP_ERROR_WRITE          = 13
          UNKNOWN_DP_ERROR        = 14
          ACCESS_DENIED           = 15
          DP_OUT_OF_MEMORY        = 16
          DISK_FULL               = 17
          DP_TIMEOUT              = 18
          FILE_NOT_FOUND          = 19
          DATAPROVIDER_EXCEPTION  = 20
          CONTROL_FLUSH_ERROR     = 21
          OTHERS                  = 22.
      IF SY-SUBRC <> 0.
        STATUS = 'E'.
        CASE SY-SUBRC.
          WHEN 1.
            MESSAGE = 'gui_download::file write error'.
          WHEN 2.
            MESSAGE = 'gui_download::no batch'.
          WHEN 3.
            MESSAGE = 'gui_download::gui refuse file transfer'.
          WHEN 4.
            MESSAGE = 'gui_download::invalid type'.
          WHEN 5.
            MESSAGE = 'gui_download::no authority'.
          WHEN 6.
            MESSAGE = 'gui_download::unknown error'.
          WHEN 7.
            MESSAGE = 'gui_download::header not allowed'.
          WHEN 8.
            MESSAGE = 'gui_download::separator not allowed'.
          WHEN 9.
            MESSAGE = 'gui_download::filesize not allowed'.
          WHEN 10.
            MESSAGE = 'gui_download::header too long'.
          WHEN 11.
            MESSAGE = 'gui_download::dp error create'.
          WHEN 12.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 13.
            MESSAGE = 'gui_download::dp error send'.
          WHEN 14.
            MESSAGE = 'gui_download::ubknown dp error'.
          WHEN 15.
            MESSAGE = 'gui_download::access denied'.
          WHEN 16.
            MESSAGE = 'gui_download::dp out of memory'.
          WHEN 17.
            MESSAGE = 'gui_download::disk full'.
          WHEN 18.
            MESSAGE = 'gui_download::dp timeout'.
          WHEN 19.
            MESSAGE = 'gui_download::file not found'.
          WHEN 20.
            MESSAGE = 'gui_download::dataprovider exception'.
          WHEN 21.
            MESSAGE = 'gui_download::control flush error'.
          WHEN 22.
            MESSAGE = 'gui_download::Error'.
        ENDCASE.
      ENDIF.
    ENDFORM.             "download_to_pc
    At The End Reward points.
    Please it's Required.
    Thanks ,
    Rahul

  • How to recover the data from a  dropped table in production/archive mode

    How to recover the data/change on a table that was dropped by accident.
    The database is on archive mode.

    Oracle Version. ? If 10g.
    Try this Way
    SQL> create table taj as select * from all_objects where rownum <= 100;
    Table created.
    SQL> drop table taj ;
    Table dropped.
    SQL> show recyclebin
    ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE  DROP TIME
    TAJ              BIN$b3MmS7kYS9ClMvKm0bu8Vw==$0 TABLE        2006-09-10:16:02:58
    SQL> flashback table taj to before drop;
    Flashback complete.
    SQL> show recyclebin;
    SQL> desc taj;
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    OBJECT_NAME                                        VARCHAR2(30)
    SUBOBJECT_NAME                                     VARCHAR2(30)
    OBJECT_ID                                          NUMBER
    DATA_OBJECT_ID                                     NUMBER
    OBJECT_TYPE                                        VARCHAR2(19)
    CREATED                                            DATE
    LAST_DDL_TIME                                      DATE
    TIMESTAMP                                          VARCHAR2(19)
    STATUS                                             VARCHAR2(7)
    TEMPORARY                                          VARCHAR2(1)
    GENERATED                                          VARCHAR2(1)
    SECONDARY                                          VARCHAR2(1)
    SQL>M.S.Taj

  • How can i recover my data from an old hard drive after replacing it?

    How can I recover my data from an old hard drive after replacing it?

    Internal or external hard drive? Was the drive still working before you replaced it?

  • How do i retrieve data from my external hard drive?

    how do i retrieve data from my external hard drive?

    If your hard drive can be detected and shows up as a drive letter in my computer but you can't access your files,then you can recover your data off it with data recovery software easily.This way is the easiest and the most inexpensive way to recover your data.If you bring it to a computer repair shop that is available for data recovery servise,they will cost you $500-1000 or more.Hmm, a lot of money.
    I managed to recover data from crashed hard drive with Tenorshare Data Recovery.If needed,you can download it and scan your hard drive for free to preview whether your data can be recovered.It will show you thumbnails for recoverable pictures.

  • How do I restore data from an external hard drive back to a restored mac?

    how do I restore data from an external hard drive back to a restored mac?

    Hello, Esmin77.  
    Thank you for visiting Apple Support Communities.  
    I see you want to restore your MacBook Pro from an external drive.  Here is an article that may help you with this process if you used Time Machine to backup these files.  
    OS X Yosemite: Recover your entire system
    Cheers, 
    Jason H.  

  • Ipod Touch 4-How to recover deleted data?I have not backed it up in itunes as I am using a new laptop

    Ipod Touch 4-How to recover deleted data?
    I need valuable information which was deleted.
    I  have not backed it up in itunes as I am using a new laptop.
    Plz help

    Thanks for the reply.
    These softwares recovery softwares recover data from external devices which are shown as drives.As far as I know the recent Ipods dont have an option to be shown as a drive.
    Any particular data recovery software available for ipod touch 4?
    Any hepl in this regard would be highly appreciated!

  • How to recover erased files in "Pages" on iPad2?

    how to recover erased document in "Pages" on iPad2?

    Copy and paste. There is no file merge function in Pages for iOS.

  • How to recover archived data in BW system ?

    Dear Friends,
    We are working on BW 3.1 system.
    Please let us know how to recover archived data in BW system ?

    Hi Sanjay Singh,
    You have 2 options,
    1) Either you can reload it through info package,
      once you create the archiving object on any cube  by defaulty the info package maintain the one option
    Load from archive data( There select with which archived file you required).
    2) Create infostructure,
    create the datasource and reload it to infocube
    i will give clear  description by tomorrow
    Regards
    Prakash. Vadala

Maybe you are looking for

  • No ping through VPN tunnel

    Hi all, Can someone help me with a problem I'm having with a Cisco ASA 5505 IOS version 8.4(5). The problem with it is that it didn't respond on pinging of  inside interface  from remote side of IpSec Site-to site tunnel. When I enable logging on the

  • PCH: Value help for Object ID

    Hi Experts, I have a question regarding Logical Database PCH. We know LDB PCH is OM based and we have  default "Object ID field " and "Reporting period field " at the selection screen. I have kept "Reporting period" as "Key date" 31.12.2010. I  wante

  • Safari launch and Flash problems

    Safari seems to crash at random times or not function well with certain Web sites. This is what has been happening so far... 1. It takes about 30 to 45 seconds for Safari to launch. 2. Sometimes after launching, Safari crashes immediately after a bla

  • SDHC 4GB and Ricoh Cardreader doesn't work

    when I insert a 4GB SDHC card in the internal cardreader the system isn't able to read it, it wants to format it. A old 64MB SD card is well read and with a additional USB cardreader I can read thoose 4GB cards. What can I do now? Thanks for yor help

  • Add column to large array

    All- I have my data (20 columns by ~700,000 rows) stored in a binary file and I would like to add a timestamp to each row of data.  I plan to use the sample rate with the number of samples to add the time at which the sample was recorded to the data.