Formatting FW drive to use w/ FCS, opinions on G-Technology drives

I just bought a G-Technology G-Drive Mini that appears to be Mac OS Extended (Journaled). Is this the best format for working with Mac, FCS, etc including being able to transfer files larger than 2gb?
Also, any opinions on G-Technology drives or the Mini?
Thanks!

elmerlang wrote:
Thanks, tjk! Just curiously, any idea what drives lacie use? I've had a number of them, had great results tho they run a bit hot, but have also heard negative opinions.
Thanks again!
I do not know. My understanding is they use a variety (possibly lowest price deal they can get, but who knows?). My lone experience with a LaCie drive was a negative one, and I know one other person who has had a LaCie and his experience was also negative, thus, I will not be buying/using another LaCie. I've seen plenty of "reviews" (like yours) from people who like them. In the end it's somewhat a game of chance, so backup and backup some more (which gets me thinking, which can lead to trouble sometimes, that with all the HDs laying around here, I don't have a RAID setup . . . hmmmm).

Similar Messages

  • Format external drive for use with both Leopard & XP, & maybe Win7

    I want to repurpose one of my old small Firewire drives to use with both Leopard and XP via Boot Camp on my MacBook. It is is 60GB and is currently formatted with MacOS Extended Journaled, and Apple Partition Map. I don't think I will have any need at the present time to store files of more than 4GB on it (most of the ones I want to store are no more than a few hundred MB each).
    Is using FAT32 with Master Boot Record adequate? Up until now I have just used flash drives for external Windows storage, but I would like to consolidate lots of topographic maps files onto this one Firewire drive instead of using multiple flash drives, and use these files with both Leopard and XP. If I want to try Windows 7 in the future via either Boot Camp or virtualization, will there be a problem with FAT32/MBR?

    Hi,
    using FAT32 as file system and MBR as partition table should work just fine with OSX and all Windows versions up to 7.
    And since your files don't come close to 4GB single-file-size, that FAT32 limitation is no hinderance.
    Use Disk Utility to do this, since Windows won't format partitions/drives with more than 32GB to FAT32 (built-in limitation).
    Nonetheless it can use such partitions (I have a 200GB on my external HD).
    Regards
    Stefan
    Message was edited by: Fortuny

  • How to format external drive for use against windows and mac

    Hi.
    Please bear with me, a possible MAC newbie here
    I'm about to buy the 13" Mac Book Pro (after ditching the Lenovo X301 because of a super slow processor, slow FSB, slow intel graphics).
    But I have a couple of questions before I buy this Mac Book Pro.
    NOTE:
    My main OS (stationary pc) is Windows, and will probably be so for a long time.
    But I need a lightweight laptop while on the run, and could not actually find any other one than the Mac Book Pro that met my requirements.
    I'm using Adobe Lightroom for indexing and managing images on my windows stationary computer and will also use Lightroom on my Mac Book Pro.
    I'm to use an external HDD for this purpose and will need to be able to both write and read to/from that HDD from both MAC and Windows.
    Export lightroom library to External HDD from Windows (thumbnails + keywords).
    Import new images and edit keywords etc from mac book pro in lightroom.
    Import changes into my windows library version after been edited from library in mac book pro.
    What options do I have when it comes to formatting that HDD?
    What will the PROS and CONS be for the different options?
    Note (I'm not to switch to Aperture (my main computer is still Windows))
    Regards

    Hi.. and thanks for that answer... another related here:
    I'm to buy this external drive:
    http://www.lacie.com/no/products/product.htm?pid=11038
    This page:
    http://pc.wikia.com/wiki/FAT32
    tells me that windows XP will only format FAT32 to max 32GB,
    will my upcoming MAC book PRO be able to format that whole disk using FAT32?
    Or do I have to use something else to format it with?
    Regards

  • Format hard drive and use the TM

    the story is long but start from downloadingthe mountain lion. i try to install but the system told me i need to run hard drive repair utility becouse the hard drive is damaged. i did that but the software told me is too much and i need to format the hard. after that . i try to remove some un use software and even try to re install the lion first and then update it to mountain lion but it didn't work.
    i have back up on time machine. i have outlook 2011 mac plus paralele with autocad and quickbook acounting software on windows.
    i need to know if i format the machine and use the TM to restore the machine . do i need to install all software again . do i lose any data or just machine will look the same as now.
    i am new in mac i have it just for year.
    please help.
    thanks

    Yes, you can use an external drive. To upgrade, however, means:
    Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
    Access the App Store with your Apple ID and purchase and download Lion.
    Your computer must meet system requirements:
    Snow Leopard General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMe service; fees and terms apply.
    Lion System Requirements
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    Some features require an Apple ID; terms apply.
    Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud.

  • What is the best practice for formatting ext drives to be used by both Mac and PC users?

    I have scanned what is available in the community about this issue and wondering if anyone has anything new to add.  I need to create backup drives of department files (large photo and video) that both we Mac and the other PC users can access.  The only consistent rec I see is FAT32, but that seems to have size limitations.  Any other suggestions?  Thanks.

    The problem with FAT32 is that 4 GB or bigger files can't be stored. In this case, and as you have a Mac OS X version that supports it (10.6.5), you can use exFAT, compatible with Windows XP, Vista, 7, 8 and Mac OS X (10.6.5 and later).
    To format a drive with exFAT, do this on a PC. If you do it on a Mac, a PC won't be able to read it. Apart from this, you will be able to store the files you need onto external drives, as exFAT hasn't got the limitations that FAT32 has.
    Another option is to use NTFS, but you will need a third-party application on your Mac to be able to write on your external drives

  • I am using a late 2008 macbook and have recently purchased a WD Passport Ultra 1TB to use for storage.  I have formatted the drive and successfully moved files onto the drive, however now I am unable to locate the drive within FINDER. Please HELP!

    I am using a late 2008 macbook and have recently purchased a WD passport ultra 1TB drive to use as storage.  I have successfully formatted the drive, and moved files from macbook onto it, however now I cannot locate the drive within FINDER, even though it is showing within disc utility.  Please HELP!!!!

    Welcome to Apple Support Communities
    Open a Finder window, and your external drive should show up in the sidebar, under "Devices".
    A different way is to go to Finder menu (in the menu bar) > Preferences > General, and tick "External disks". If your external drive is detected by OS X, it will show up at the top right corner of Desktop, so double-click it to access to the content.

  • I have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. please help

    i have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. only the downloaded new os x yosemite in the os x base system. please help

    Please try again after taking each of the following steps that you haven't already taken.
    Step 1
    Reset your computer’s PRAM.
    Step 2
    If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
    Step 3
    Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
    Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
    Step 4
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested.

  • HT4796 Can i use windows migration assistant to transfer files from a windows formatted hard drive to a mac?

    I have a windows formatted hard drive and a macbook pro. I was wondering if i could use the windows migration assistant to transfer files from my hard drive to the mac

    No.
    Just connect the drive to your Mac. The Mac can read most Windows formats (it cannot WRITE Windows New Technology File System (NTFS) formatted drives.

  • Format Seagate Drive to use across iMac and MacBook

    I have purchased a Seagate Expansion Portable Drive to use together with Time Machine.
    When I plug it in Time Machine asks if I want to use it as the storage device which I do so say yes.
    I'm then asked if I want to format the drive. I am assuming that this is because it is formatted for windows as standard and Time Machine requires it to be formatted differently.
    I am ok with this but in answer to a previous post it was recommened that I have different volumes for each Time Machine instance i.e. 1 for my iMac and 1 for my MacBook.
    Question. Should I manually format the drive for 2 volumes? If so how do I do this?
    OR
    Will the format process let me set up seperate volumes and is this straightforward?
    Thanks
    Paul..

    Thanks Niel. I have found out how to do this but am not sure of the option to choose under Format:
    There are 4 which start Mac OSX Extended. I'm assuming that it is one of them.
    Also assuming that once I've done this Time Machine will see them as drives to access.
    Paul..

  • IPod not recognized by iTunes, Windows Vista prompts to format iPod drive

    Hello,
    I have IPod 80GB which I rarely use. Yesterday  when I wanted to use it, I went to add a few new audios to it, connected to my computer and launched iTunes. I added the folder which contained audios to iPod, synced it and wanted to disconnect, but iTunes took excepionally long to finish.
    When I clicked on 'eject' icon, I go a message saying 'some files are being accessed' or something like that. I waited for 5-10 minutes but it won't finish up, so I unplugged my iPod as I had to leave.
    Later when I wanted to play, I noticed I had no audios in iPod at all.
    Later when I got home, connected it again to computer, launched iTunes, but iTunes won't show iPod. A few minutes later, windows (Vista) prompted a message saying that it needs to format N: drive (which was iPod).
    I tried diagnostics on tis site, restarted/reset iPod etc, but it didn't solve the problem. I removed and reinstalled iTunes as per instructions, still no use.
    Then I called Apple support Canada and the guy on the phone said I need to pay to get support. He said he'd send me some documents via email which would solve the problem and hen I wouldn't have to pay. I gave him my email address, but so far I have recieved no emails from him. I have checked my spam and junk folders, just in case, but nothing there.
    Anyhow, this issue came up all of a sudden, there has been no physical damage to iPod, I barely use it. maybe for few minutes here and there a month. I have had numerous problems in the past every time a new iTunes update come, it always creates problems. Last year I spent many hours after iTunes update make iPod unrecognizable so I had to go back to older version, then upgrade etc. I don't remember how I solved the issue, but it took a while and it turned out to be something of iTunes version issue.
    I wonder if this is another of such issue. I hope its not a hardware issue with iPod. I'd appreciate any help.
    Thanks

    I just got Vista too and it does recognize my ipod, but itunes can't find a lot of my songs on the computer. I tried to uninstall itunes and reinstall it thinking that it would seach for new music when I installed it again but nothing new happened when I did that.

  • Format external drive partition under 10.2.8

    Hello. I have been trying to setup a WD My Book 500gb with 2 partitions to be used as on offsite backup unit for our business computers. We have one Mac (this G5), and 4 Windows stations (3 XP/ 1 98SE). I am trying to setup this unit with one partition using NTFS and the other with Mac HFS or HFS+ file systems. I have found a utility that allows me to format the partition that I intend to use with the Mac as a FAT32 partition. I then tried bringing the WD MyBook to the G5 and reformatting that partition as HFS. When I run Disk Utility, I click on the partition showing as Fat32 under disk2 and then click on the Erase tab, select Mac OS X Extended file system, no OS9 drivers, have tried various names (Mac BU, My Mac BU, My MacBook, etc), then click Erase, Confirm Erase. The progress bar comes up for a moment or so, says that it is erasing the volume, then exits out as if done. Unfortunately, it never mounts the drive and the volume no longer shows up in Disk Utility (only shows the Drive without any recognized partitions) until I close and restart Disk Utility. When I restart Disk Utility, the volume I am trying to format once again shows up under the drive, tho now with no name. Under Identification, it says Mount Point: Not Mounted/ Format: MS-DOS/ Capacity: 116.44gb. After doing some browsing around onthe internet trying to troubleshoot this on my own, I found some reference to Disk Utility logs (supposedly avail in upper right corner, tho didn't find there). I searched in the Library/Logs/Crash Reporter and found 'Disk Utility.crash.log' which says:
    Date/Time: 2008-09-17 21:25:42 -0400
    OS Version: 10.2.8 (Build 6S90)
    Host: Joanns-Computer.local.
    Command: Disk Utility
    PID: 540
    Exception: EXCBADACCESS (0x0001)
    Codes: KERNPROTECTIONFAILURE (0x0002) at 0x01215088
    Any suggestions on how I might get this partition formatted for a Mac file system? I would use Fat32, but I plan to use RSyncX to backup this G5 and would like to make the backup bootable in case of critical failure. And since I am using this drive as a backup storage device rather than file sharing system, I have no need to access files on either partition from the opposite operating system.
    Thanks in advance for any help that can be rendered. Also, if more info or more of the log file is needed to diagnose, please let me know.
    PS: Sorry if this is in wrong forum. Wasn't sure if this falls under Setup, Customizing or something else.

    You can either format the drive entirely FAT32 that can be used on both Windows and Mac or you can format the drive entirely for the Mac, but you cannot have one partition of each on the same drive (not with Jaguar. You would need Leopard to accomplish that and an Intel Mac.)
    There is this article/hint explaining a method for doing so, but I do not know if it is doable with Jaguar. Maybe Panther since the hint appeared about the time Panther was released.

  • Restore PSE 3 from a disc image to a re-formatted hard drive

    I have Windows XP SP3 etc; Photoshop Elements 3.01; Acronis True Image 11; a 200GB hard drive (for images, audio, etc), a 250 GB hard drive for video storage and 500GB extl hard drive for backup of both hard drives. Some time ago I made a PSE backup onto the extl drive and a couple of incremental backups. I also have a disc image of both drives on the extl drive. With backup disc free space getting scarce I made a new full PSE backup and then deleted the original backups. To cure a number of conflict problems (due to multiple copies of Windows on both hard drives!) I re-formatted C drive and reinstalled the software, including PSE 3. I tried to restore my images and PSE catalog by means of PSE Restore from the PSE Backup; but after a while it asked me for discs/backups 2 and 3 - the ones I had deleted. All of the images are restored onto the C drive, but only a few tags - no Collection detail. Using Aconis I can mount the original disc image of the C drive, and the jpeg/CR2 and catalog psa files are in the usual place. However, file paths are somewhat different between the mounted copy of the C drive and the present actual C drive. Can anybody please advise me how to proceed from here? Is it just a case of using PSE 3 to move the catalog psa file from the Acronis mounted image into the C drive? The problem seems similar to the various threads that I've read on transferring to a new computer with PSE 7, but I am reluctant to "move" (as distinct from "copy") files from the Acronis image without some advice. Can anybody please offer some advice?

    Hi dj_paige
    Thanks a lot for the answer to my problem.  Having resolved my problem with Acronis I then followed your instructions; the images and catalog with Collections etc are now fully restored.  Thanks again for your help.

  • Advanced Format Hard Drive not recognized by HP DV6000 Controller

    Hello,
    I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago.  So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems. 
    Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
    "Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
    my drive is a SATA ||| but I'm pretty sure it's the same problem.  The site goes on to say a fix would be to  "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
    My question(s) are.
    1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
    2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
    3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
    4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
    Thanks for your help!

    Hi @jasmine00 
    Welcome to the HP Support Forums.
    I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
    That being said there is this document that could be helpful with your problem.
    Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
    And for your reference:
    HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Format external HD for use with Mac Network and PC

    System config: Home network: Mac Pro & MacBook Pro connected via AirPort Extreme. Both run OS X 10.5.6. The Mac Pro also runs Windows XP Pro. Work computer: Dell, Latitude D830 running Windows XP Pro.
    Situation: I have a Western Digital WDMT5000TN 500GB Portable HD, (FireWire 800 & USB). The WDMT5000TN came formatted Mac OS Extended, which, as I suspected, could neither be read nor written to in XP. I reformatted the drive NTFS in XP Pro. This worked well with XP but was read only in OS X.
    Ideally, I would like to format the drive so that it is both read/write capable with both OS X & XP Pro and handle file transfers in excess of 100 MB. If this is not possible my second choice would be to have the drive read/write OS X & read only XP, given that I upload mostly in the Apple domain & would be able to perform backups of it’s contents using Time Machine with OS X.
    If anyone has a formatting recommendation or related information that may help I would appreciate your insight. Thank you.

    Two basic options:
    1. Format the drive FAT32 (MS-DOS) which is read/write on both Windows and OS X.
    2. Leave the drive formatted NTFS and install software on OS X to enable read/write access. The options are: a.) Paragon NTFS for Mac OS X - 6.5.1; b.) MacFuse and NTFS-3G 2009.2.1u1; and, c.) NTFS for Mac 1.0.

  • Format External Drive - From Mac for Windows

    I have a Maxtor One-touch that I need to back up a bunch of data for a Windows XP user. After some research, I thought that formatting the drive in the MS-DOS (FAT) format would do it, however, after doing so and moving all of the data, I have tried the Harddrive on a PC running Windows XP. The drive doesn't mount.
    The external drive is a PC/MAC compatible version. Am I overlooking anything? Is there something I need to do in windows to access the drive.... because it's not obvious.

    Hi Christopher,
    follow either Templetons advise or (if not possible) use Disk Utility and set the partition scheme (behind the Options button) to MBR (Master Boot Record) and use MS-DOS (= FAT32) as file system.
    That should also do the trick.
    The 'standard' partition scheme on Intel Macs is GPT (GUID Partition Table) which can sometimes lead to the effect with Windows PC that you observed.
    Hope it helps
    Stefan

Maybe you are looking for