Formatting Seagate 1TB external drive - How long does it take?

I'm 20+ minutes into erasing this disc and see no way to monitor any progress.
I've got a blue-stripe barber pole bar spinning along next to a line that reads: newfs_hfs:/dev/rdisk1s1: partition size is not a multiple of 4K.
Anybody know what that means?
Anybody have an idea how long it takes to wipe 1TB?
TA

Formatting should be instant. It sounds like you aren't just formatting, but also writing zeros or something. If you are using Zero Out Data, I just did that to several new 1TB internal and external drives, and I think it took about 2.5 hours each. Using a Mac Pro and eSATA. It might take longer on a laptop, not sure.
The time seemed appropriate because that was similar to how long it took to clone my machine backups onto them. Each full clone took over 2 hours of copying. Either way, it's writing as fast as it can.
If you used 7-Pass or 35-Pass Erase, frankly you're going to wait days.
Remember, we're talking about one freaking terabyte of data to write. Just a few years ago, it was inconceivable that anyone would need to do that at home. It felt like long enough waiting for my old 250GB disks to zero out, and these are 4x that.

Similar Messages

On Seagate 1TB external drive for W8.1 system image backup

System image attempt using W8.1 on a Seagate 1Tb external drive stalls and advises "Insufficient space" etc. I've tried expanding the volume, decreasing the volume, renaming the drive. What I've read on this site requires using non-Microsoft
programs to solve a Microsoft issue. As this is a W8.1 issue (no problems with backups in W7) surely you Microsoft experts out there can come up with a simple solution for computer illerates lilke I am.

Hi Jamesg46,
What was the exact full error message?
Also,please check your System Reserved partition space to see if it has a large USN journa.
If so,please try to clear and disable the USN journal on the System Reserved partition:
You can refer to the following thread:
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-code-0x80780119-not-enough-disk-space-to/865fbd74-06bc-4cc3-b054-d3d56b60eeff
Please perform the steps as Mancer provided to check the result.
Regards,
Kelvin Xu
TechNet Community Support

"How long does it take to do a dist-upgrade on your distro?"

Yesterday there was a question in the USALUG.org "How long does it take to do a dist-upgrade on your distro?"
This question was a good question, so I decide to make the ultimate test. I have a lot of computers standing here around, and remembered that on one of them was have already Archlinux installation. I was right, when I booted, the system check said me, that the system was 253 days not checked anymore. I got so excited that I forgot to check was it one of my 0.7.2 Gimmick or 0.8 Voodoo installations.
The Computer
Dell OptiPlex GX110
[jada@arch-02 ~]$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 797.452
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat p se36 mmx fxsr sse up
bogomips : 1596.45
clflush size : 32
[jada@arch-02 ~]$
I used the following command for the update
$ time pacman -Syu
The Test
first update pacman
[root@arch-02 jada]# pacman -Syu
warning: current locale is invalid; using default "C" locale
:: Synchronizing package databases...
core 23.8K 80.0K/s 00:00:00 [#####################] 100%
extra 310.5K 292.3K/s 00:00:01 [#####################] 100%
community 341.0K 295.8K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
:: pacman has detected a newer version of the "pacman" package.
:: It is recommended that you allow pacman to upgrade itself
:: first, then you can re-run the operation with the newer version.
:: Upgrade pacman first? [Y/n] y
resolving dependencies... done.
looking for inter-conflicts... done.
Targets: libarchive-2.4.11-1 libdownload-1.3-1 pacman-3.1.1-1
Total Package Size: 1.19 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
libarchive 314.8K 253.4K/s 00:00:01 [#####################] 100%
libdownload 49.4K 97.9K/s 00:00:01 [#####################] 100%
pacman 855.2K 460.4K/s 00:00:02 [#####################] 100%
checking package integrity... done.
cleaning up... done.
(3/3) checking for file conflicts [#####################] 100%
(1/3) upgrading libarchive [#####################] 100%
(2/3) upgrading libdownload [#####################] 100%
(3/3) upgrading pacman [#####################] 100%
>>> The makepkg.conf syntax has changed, please note the new format
>>> when merging the pacnew file with your old configuration.
>>>
>>> The pacman.conf default file has changed. Please update your
>>> config to use the single mirrorlist, and any additional files
>>> in /etc/pacman.d/ (core, extra, etc.) can be deleted.
>>>
>>> The location of sync DBs has moved from /var/lib/pacman/ to
>>> /var/lib/pacman/sync/ for several reasons. To delete older
>>> DBs, please run pacman -Sc and follow the instructions.
>>> You will also have to run pacman -Sy to refresh the sync DBs.
>>>
>>> abs is no longer included; please install the 'abs' package
>>> to use abs. You may need to edit abs.conf to re-enable repos.
[root@arch-02 jada]#
restart pacman 3.1.1 and update the packages
[root@arch-02 jada]# time pacman -Syu
:: Synchronizing package databases...
core 23.8K 80.3K/s 00:00:00 [#####################] 100%
extra 310.5K 261.1K/s 00:00:01 [#####################] 100%
community 341.0K 302.5K/s 00:00:01 [#####################] 100%
:: Starting full system upgrade...
:: Replace mktemp with core/coreutils? [Y/n] y
:: Replace mpg321 with extra/mpg123? [Y/n] y
warning: bind: forcing upgrade to version 9.4.2-1
warning: cpufrequtils: forcing upgrade to version 002-3
warning: dnsutils: forcing upgrade to version 9.4.2-1
warning: flex: forcing upgrade to version 2.5.33-4
warning: opera: forcing upgrade to version 9.25-2
resolving dependencies...
warning: dependency cycle detected:
warning: bash will be installed before its glibc dependency
warning: dependency cycle detected:
warning: readline will be installed before its glibc dependency
warning: dependency cycle detected:
warning: ncurses will be installed before its glibc dependency
warning: dependency cycle detected:
warning: db will be installed before its coreutils dependency
looking for inter-conflicts...
Remove: mktemp mpg321
Total Removed Size: 0.08 MB
Targets: ncurses-5.6-6 readline-5.2-7 bash-3.2.033-2
kernel-headers-2.6.23.1-2 tzdata-2007k-1 glibc-2.7-7 attr-2.4.39-2
acl-2.2.45-2 cracklib-2.8.10-5 gcc-libs-4.2.3-3 db-4.6.21-2
pam-0.99.9.0-2 shadow-4.0.18.2-2 coreutils-6.10-2 libtool-1.5.26-1
mpg123-1.2.0-1 fontconfig-2.5.0-1 zlib-1.2.3-4 libpng-1.2.24-1
cairo-1.4.14-1 libtasn1-1.3-1 lzo2-2.02-3 libgpg-error-1.6-1
libgcrypt-1.4.0-1.1 opencdk-0.6.6-1 gnutls-2.0.4-1 libcups-1.3.5-1
pcre-7.6-2 glib2-2.14.5-1 pango-1.18.4-1 gtk2-2.12.7-1
binutils-2.18-5 gmp-4.2.2-2 mpfr-2.3.1-1 gcc-4.2.3-1
glproto-1.4.9-1 libgl-7.0.3rc1-1 mesa-7.0.3rc1-1 acroread-8.1.2-1
dialog-1.1_20071028-1 pciutils-2.2.8-3 alsa-utils-1.0.15-2
e2fsprogs-1.40.4-1 apr-1.2.12-1 gdbm-1.8.3-5 apr-util-1.2.12-1
openssl-0.9.8g-2 apache-2.2.8-1 jack-audio-connection-kit-0.109.0-1
kde-common-3.5.8-3 libxmu-1.0.4-1 qt3-3.3.8-6.1 arts-1.5.8-2
diffutils-2.8.1-5 gawk-3.1.6-2 m4-1.4.10-3 autoconf-2.61-3
perl-5.8.8-9 automake-1.10.1-2 filesystem-2007.11-6 avahi-0.6.20-3
bftpd-2.1-1 bin86-0.16.17-3 dnsutils-9.4.2-1 bind-9.4.2-1
bison-2.3-4 bluez-libs-3.24-1 libusb-0.1.12-3 bluez-utils-3.24-2
bridge-utils-1.2-2 bzip2-1.0.4-3 cairomm-1.4.6-1 cmake-2.4.8-1
cpio-2.9-3 sysfsutils-2.1.0-4 cpufrequtils-002-3
device-mapper-1.02.24-1 popt-1.10.6-3 cryptsetup-1.0.5-5
csup-20060318-5 cups-1.3.5-1 curl-7.18.0-1 dbus-qt3-0.62-3
dcron-3.2-3 dhcpcd-3.2.0-1 dmapi-2.2.8-3 libxml2-2.6.31-1
docbook-xsl-1.73.2-1 dosfstools-2.11-2 dvd+rw-tools-7.0-4 ed-0.8-3
enlightenment-0.16.8.11-1 gnome-desktop-2.20.3-1 eog-2.20.4-1
libidl2-0.8.10-1 mozilla-common-1.1-2 xulrunner-1.8.1.11-1
epiphany-2.20.3-1 eventlog-0.2.5-2 ghostscript-8.61-1
gnome-keyring-2.20.3-1 libsasl-2.1.22-5 libldap-2.3.39-2
smbclient-3.0.28A-1 gnome-vfs-2.20.1-1 libdjvu-3.5.20-1
poppler-0.6.3-1 poppler-glib-0.6.3-1 evince-2.20.2-1 evms-2.5.5-5
libsoup-2.2.104-1 evolution-data-server-1.12.3-1 exiv2-0.15-1
faad2-2.6-1 grep-2.5.3-3 sed-4.1.5-3 fakeroot-1.9.2-1 fbset-2.1-2
file-4.23-1 file-roller-2.20.3-1 findutils-4.2.32-1
firefox-2.0.0.12-1 flashplugin-9.0.115.0-2 flex-2.5.33-4
font-bitstream-speedo-1.0.0-4 font-misc-ethiopic-1.0.0-4
font-misc-meltho-1.0.0-4 freeglut-2.4.0-3 freetype1-1.3.1-4
glib-1.2.10-7 gtk-1.2.10-8 imlib-1.9.15-4 libstroke-0.5.1-2
fvwm-2.4.20-2 gail-1.20.2-1 gc-7.0-2 gdb-6.7.1-1
gtksourceview2-2.0.2-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
libgnomeprintui-2.18.2-1 python-2.5.1-5 pygobject-2.14.1-1
pygtk-2.12.1-1 gedit-2.20.4-1 gen-init-cpio-2.6.17-3
gettext-0.17-1 librsvg-2.20.0-1 gimp-2.4.4-1 gkrellm-2.3.1-2
glibmm-2.14.2-1 gmime-2.2.16-1 gnokii-0.6.22-3
gnome-menus-2.20.3-1 libwnck-2.20.3-1 gnome-panel-2.20.3-1
gstreamer0.10-0.10.15-1 gstreamer0.10-base-0.10.15-1
gstreamer0.10-alsa-0.10.15-1 gucharmap-1.10.2-1 libgtop-2.20.1-1
gnome-applets-2.20.1-1 metacity-2.20.2-1 libbeagle-0.3.0-3
nautilus-2.20.0-4 gnome-control-center-2.20.3-1
gnome-python-2.20.1-1 gnome-python-desktop-2.20.0-3 guile-1.8.3-1
gnome-games-2.20.3-1 gnome-power-manager-2.20.2-1
tcp_wrappers-7.6-8 gnome-session-2.20.3-1 gtkmm-2.12.3-1
gnome-system-monitor-2.20.2-1 vte-0.16.12-1 gnome-terminal-2.18.4-1
gnome-utils-2.20.0.1-2 gnupg-1.4.8-1 libassuan-1.0.4-1
gnupg2-2.0.8-1 gpgme-1.1.6-1 gpm-1.20.1-7 groff-1.19.2-4
grub-0.97-9 gstreamer0.10-cdparanoia-0.10.15-1
gstreamer0.10-gnomevfs-0.10.15-1 gstreamer0.10-ogg-0.10.15-1
gstreamer0.10-vorbis-0.10.15-1 gtkhtml-3.16.3-1 gutenprint-5.0.2-1
vi-7.1.228-1 vim-7.1.228-1 gvim-7.1.228-1 gzip-1.3.12-4
hal-info-0.20071212-1 hdparm-7.7-3 usbutils-0.73-5 wget-1.11-1
hwd-5.3.2-1 hwdetect-0.9-1 icewm-1.2.35-1 ifenslave-1.1.0-3
imagemagick-6.3.8.0-1 intltool-0.37.0-1 iproute-070710-3
iptables-1.3.8-2 iputils-20070202-4 isdn4k-utils-3.2p1-3
jfsutils-1.1.12-2 jre-6u3-2 kbd-1.12.20070827-2 kdelibs-3.5.8-4
lm_sensors-3.0.1-1 xorg-xauth-1.0.2-1 kdebase-3.5.8-3
qscintilla-qt3-1.7.1-2 kdebindings-3.5.8-2 libgphoto2-2.4.0-4
poppler-qt3-0.6.3-1 kdegraphics-3.5.8-3 sqlite3-3.5.6-1
libopensync-0.34-1 kdepim-3.5.8-2 klibc-1.5-3 klibc-extras-2.3-1
klibc-udev-116-2 klibc-module-init-tools-3.2.2-1
mkinitcpio-0.5.17-2 module-init-tools-3.2.2-5 kernel26-2.6.24.1-2
less-418-1 lftp-3.6.3-1 libao-0.8.8-2 orbit2-2.14.12-1
libbonobo-2.20.3-1 libcdio-0.79-1 libelf-0.8.10-3 libevent-1.3d-2
libgdiplus-1.2.6-1 libmikmod-3.1.12-1 libmysqlclient-5.0.51-2
libpcap-0.9.8-2 libsamplerate-0.1.2-4 libtar-1.2.11-3
libxfont-1.3.1-2 licenses-2.3-1 lilo-22.8-2 links-2.1pre33-1
logrotate-3.7.5-1 lua-5.1.3-1 lvm2-2.02.33-1 mailx-8.1.1-5
make-3.81-3 man-1.6f-2 man-pages-2.77-1 mdadm-2.6.4-1
mono-1.2.6-1 mutt-1.5.17-4 mysql-clients-5.0.51-3 mysql-5.0.51-3
nano-2.0.7-1 net-tools-1.60-13 netkit-ftp-0.17-4
netkit-telnet-0.17-7 nfsidmap-0.20-2 portmap-6.0-2
nfs-utils-1.1.0-3 ngrep-1.45-4 nmap-4.53-1 ntp-4.2.4p4-4
openssh-4.7p1-6 openvpn-2.0.9-3 opera-9.25-2 orca-2.20.3-1
patch-2.5.4-4 pcmciautils-014-3 php-5.2.5-3 pilot-link-0.12.3-1
pine-4.64-4 pkgconfig-0.22-3 procps-3.2.7-4 libx86-0.99-1
vbetool-1.0-2 pm-utils-0.99.4-1 qt-4.3.3-4 poppler-qt-0.6.3-1
postgresql-libs-8.2.6-1 postgresql-8.2.6-1 ppp-2.4.4-6
procinfo-19-2 psmisc-22.6-1 qca-2.0.0.svn744387-1.1 qca-qt3-1.0-1
qca-tls-1.0-5 qscintilla-2.1-3 reiserfsprogs-3.6.20-3
rp-pppoe-3.8-2 rsync-2.6.9-4 samba-3.0.28A-1 screen-4.0.3-5
seahorse-2.20.3-1 shared-mime-info-0.23-1 sudo-1.6.9p12-1
sysklogd-1.5-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
sysvinit-2.86-4 taglib-1.4.0.svn744384-1 tar-1.19-2 tcl-8.5.1-1
tcpdump-3.9.8-1 tcsh-6.15.01-1 thunderbird-2.0.0.9-2 tk-8.5.1-1
totem-plparser-2.21.91-1 totem-2.20.1-3 ttf-dejavu-2.23-1
udev-116-3 unichrome-dri-7.0.3rc1-1 unzip-5.52-3
vorbis-tools-1.1.1-7 which-2.19-2 whois-4.7.24-1
wireless_tools-29-2 wireshark-0.99.7-1 wpa_supplicant-0.5.9-1
xaw3d-1.5-4 xchat-2.8.4-2 xf86-input-evdev-1.2.0-1
xf86-input-joystick-1.3.1-1 xf86-video-ati-6.7.197-2
xf86-video-mga-1.9.100-2 xf86-video-nv-2.1.7-1
xf86-video-s3virge-1.9.1-9 xf86-video-savage-2.1.3-2
xf86-video-sis-0.9.4-2 xfsprogs-2.9.4-2 xfsdump-2.2.46-3
wavpack-4.41.0-3 xine-lib-1.1.10-1 xinetd-2.3.14-3
xkeyboard-config-1.1-1 xmms-1.2.11-1 xorg-server-1.4.0.90-6
xorg-xinit-1.0.7-3 xscreensaver-5.04-2 yelp-2.20.0-3
zenity-2.20.1-1
Total Download Size: 743.90 MB
Total Installed Size: 748.87 MB
Proceed with installation? [Y/n]
Proceed with installation? [Y/n] y
:: Retrieving packages from core...
ncurses-5.6-6-i686 1738.2K 518.0K/s 00:00:03 [#####################] 100%
readline-5.2-7-i686 271.5K 228.3K/s 00:00:01 [#####################] 100%
bash-3.2.033-2-i686 407.1K 299.1K/s 00:00:01 [#####################] 100%
kernel-headers-2.6.2... 621.6K 376.8K/s 00:00:02 [#####################] 100%
tzdata-2007k-1-i686 610.7K 329.0K/s 00:00:02 [#####################] 100%
xorg-server-1.4.0.90... 7.4M 659.0K/s 00:00:11 [#####################] 100%
xorg-xinit-1.0.7-3-i686 14.4K 56.9K/s 00:00:00 [#####################] 100%
xscreensaver-5.04-2-... 8.0M 655.2K/s 00:00:13 [#####################] 100%
yelp-2.20.0-3-i686 603.4K 356.7K/s 00:00:02 [#####################] 100%
zenity-2.20.1-1-i686 1896.3K 546.6K/s 00:00:03 [#####################] 100%
:: Retrieving packages from community...
freetype1-1.3.1-4 119.9K 129.5K/s 00:00:01 [#####################] 100%
gkrellm-2.3.1-2 724.3K 411.1K/s 00:00:02 [#####################] 100%
xmms-1.2.11-1 1945.1K 557.0K/s 00:00:03 [#####################] 100%
checking package integrity...
(349/349) checking for file conflicts [#####################] 100%
( 1/349) upgrading ncurses [#####################] 100%
( 2/349) upgrading readline [#####################] 100%
( 3/349) upgrading bash [#####################] 100%
( 4/349) upgrading kernel-headers [#####################] 100%
( 5/349) upgrading tzdata [#####################] 100%
( 6/349) upgrading glibc [#####################] 100%
(340/349) installing wavpack [#####################] 100%
(341/349) upgrading xine-lib [#####################] 100%
(342/349) upgrading xinetd [#####################] 100%
(343/349) upgrading xkeyboard-config [#####################] 100%
(344/349) upgrading xmms [#####################] 100%
(345/349) upgrading xorg-server [#####################] 100%
:: Could not detect nvidia-utils on system
:: Will attempt to use built-in libwfb
(346/349) upgrading xorg-xinit [#####################] 100%
(347/349) upgrading xscreensaver [#####################] 100%
(348/349) upgrading yelp [#####################] 100%
(349/349) upgrading zenity [#####################] 100%
real 56m46.062s
user 4m25.013s
sys 1m46.520s
[root@arch-02 jada]#
And for your tread question.
How long does it take to do a dist-upgrade on your distro?
one hour
real 56m46.062s
user 4m25.013s
sys 1m46.520s
After reboot the system loads all new applications with out any problem. Later I replaced the intel-video driver "xf86-video-i810 1.7.4-6" with the driver xf86-video-intel 2.2.0-2. No problems at all.
Archlinux rocks

JaDa wrote:Archlinux rocks
definitely. By contrast, here's a regular upgrade on my debian box -- out of the blue it's having some problem with one of the packages, and it's turning into a regular recursive nightmare.
root@moe:~ # apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these.
The following packages have unmet dependencies.
E: Unmet dependencies. Try using -f.
root@moe:~ # apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies...Done
The following extra packages will be installed:
exim4-base exim4-daemon-light
Suggested packages:
exim4-doc-html exim4-doc-info eximon4 libmail-spf-query-perl
The following packages will be upgraded:
exim4-base exim4-daemon-light
2 upgraded, 0 newly installed, 0 to remove and 64 not upgraded.
1 not fully installed or removed.
Need to get 0B/1391kB of archives.
After unpacking 8192B of additional disk space will be used.
Do you want to continue [Y/n]?
Preconfiguring packages ...
dpkg: exim4-daemon-light: dependency problems, but removing anyway as you request:
exim4 depends on exim4-daemon-light | exim4-daemon-heavy | exim4-daemon-custom; however:
Package exim4-daemon-light is to be removed.
Package exim4-daemon-heavy is not installed.
Package exim4-daemon-custom is not installed.
dpkg: error processing exim4-daemon-light (--remove):
Package is in a very bad inconsistent state - you should
reinstall it before attempting a removal.
Errors were encountered while processing:
exim4-daemon-light
[ Rootkit Hunter version 1.3.0 ]
File updated: searched for 152 files, found 131
E: Sub-process /usr/bin/dpkg returned an error code (1)
root@moe:~ # apt-get install exim4-daemon-light
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies.
exim4-daemon-light: Depends: exim4-base (>= 4.69) but 4.68-2 is to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
root@moe:~ #
It's so "delicate" and temperamental compared to the no-nonsense, straightforward approach of Arch. If one little thing is off, the entire system has a hissy-fit and won't do anything until you hunt the internet high and low searching for a solution, encountering all the debian hawks along the way who are ready to rip your head off at the first suggestion that debian isn't directly from god and could have a problem. Imo, Arch is the best linx distro hands down. Nothing else even comes close.

Installing Windows 2003 Server Standard/XP is very slow- how long does it take?

Hello, I'm looking for some ideas here... I tried installing Windows 2003 on my newly build computer, but after 3 hours it still wasn't installed, and seemed to just be really really slow, and not frozen. I ended up giving up and tried putting windows xp on it, but after an hour it still didn't finish installing. I figure there really has to be something wrong here... The only thing out of the ordinary is that I'm using 4GB ram DDR2 667. How long does it take to install windows xp on your system?!?
Things that I've tried have been:
disabled hypterthreading
loaded optimized settings
changed sata to mode II
MSI 945G Neo-F Socket T (LGA 775) Intel 945G ATX Intel Motherboard
Seagate Barracuda 7200.9 ST3160812AS 160GB 7200 RPM SATA 3.0Gb/s
Intel Pentium 4 650 Prescott 800MHz FSB LGA 775 EM64T
pqi TURBO $GB (4 x 1GB) 240-Pin DDR2 SDRAM DDR2 667 (PC2 5400) Unbuffered Dual
POwer: Ultra Xfinity 500Watt ATX +5v +3.3v +12v1 +12v2 -12v +5vsb
BIOS 1.2
Optial Drive: Generic Toshiba DVD

1&3 and 2&4 seem to be working okay, I've tested all these combinations (this is just plugging in the memory and looking at the cpu in task manager)
mem1 in slot 1 okay (tested slot 1 okay)
mem1 in slot 1
mem2 in slot 3 okay (test 2gigs in duel channel first set of memory okay)
mem3 in slot 1
mem4 in slot 3 okay (tested 2 gig in duel channel second set of memory)
mem1 in slot 2 okay (tested slot 2 okay)
mem1 in slot 2
mem2 in slot 4 okay (tested the second duel channel okay)
mem1 in slot 1
mem2 in slot 3
mem3 in slot 2
mem4 in slot 4 high cpu
mem3 in slot 1
mem1 in slot 2
mem4 in slot 3
mem2 in slot 4 high cpu
I upgraded to the latest bios, no luck... I haven't run any extensive memory tests, but through the tests i did, it seems that the memory is okay. Given these tests do you think it is more likely a problem with the motherboard running 4 slots? Or maybe some power issue, where the 4 sticks of memory are not getting enough power to work right.
The power supply I am using is Xfinity 500W
+5V/30A +3.3/30A +12V1/16A +12V2/18A -12V/0.6A +5VSB/2.5A
Thanks for your feedback..

HT201250 How long does it take to move 700gb from time machine to a new iMac?

How long does it take to move 700gb from time machine to a new iMac?

Last time I did this it took approx 2 and a half hours for 220 GB...
That was using an External USB 2 Time Machine Hard Drive.

HOW LONG DOES IT TAKE TO GET iPHOTO BOOK?

I would like to order my first HARD COVER book and since I am not living in USA, my friend would bring the book back to Europe.
But the only problem is that, she will be there only two days, so the book must be at the address, she will be living on 9th of February.
When do I need to place the order? How long does it take to get the album?
Thank you for your help.

Can't say - no idea where it is going to or what will be going on them
If it were me I'd say that the extra cost was a cheap insurance policy against external forces messing things up - but you make that decision
Waiting three days to order and shipping ground rather than express will increase the chances of it not making it - probably still 95% + (guessing of course) that it will but every day you wait makes the chances less and not using the fastest shipping also increases the chances of failure
If money is the issue then ordering today rather than Wed would be a good idea to me
Good Luck
LN

How long does it take to delete all the files in a lost MacBook Pro?

How long does it take to delete all the files in a lost MacBook Pro?

Quite a while since there may be 1/2 million files or more to delete. There is only one quick way, and that is to reformat the drive.

How long does it take to back up my macbook pro?

How long does it take to back up my macbook pro?

How long TimeMachine will take is a function of: 1) how frequently you back up, 2) how much free space the backup drive has, and 3) how the drive is connected to the computer.
1) the longer you wait between backups increases the data that has to be backed up and it also increases the preparation time. Letting more than a couple days between backups elapse isn't a good idea to begin with - who wants to try and redo 3 days of work - but it also seems to take longer than three daily backups.
2) when your backup drive becomes too full, TimeMachine must 'look through' the oldest files and delete enough to make room for the newer files. This can take a very long time.
3) backing up over WiFi to a networked drive or TimeCapsule is the slowest backup method and when you have lots to back up it can take a very long time. If your connection speed isn't good it gets worse. For all the advantages that a TimeCapsule appears to have, this alone was enough to make me rethink the idea.
With a 17 day estimate I'm guessing you must be using a TimeCapsule.

How long does it take to install mountain lion

how long does it take to install mountain lion

It depends on a number of factors - the speed of your computer and hard drive mostly. My experience has been that a standard upgrade will take 30-45 minutes. If you are erasing the hard drive and installing, it takes about 20-30 minutes, not counting migrating your data and applications.
This doesn't count downloading which can take as litting as 40 minutes (a very fast broadband connection during off hours) to as much as several hours.

How long does it take to create a recovery disc?

Hi!!!
I have just bought a Toshiba Portege T110.
I tried the first time round and cancelled at disc 4 bec i was out of writeable disc.
Today i am on my 2nd try. I have mgt disc 1-3. When at disc 4~~it says is creating Windon Recovery Environment (64bit) and recording. But the progress bar has been hanging there for the abt 1-2hrs and still not done yet~~
I tried to cancel the program, but it says is recording and advise me not to cancel as it will take a long time.
Can some kind soul advise if this is normal? How long does it takes? If not, what could be the problem?
Thank you in advance!!!

Hi all~~
i have the answer to my question alrdy~~
i accidentatly canceled the copying after waiting over 2 hr on disc 4~~
I restarted the process this morning~~~as i have alrdy done disc 1-3~~i am able to start at disc 4 straight away!!!
Disc 4 took less then 10 mins to complete.
So guys~~ the whole process from disc 1 to 4 takes less than 1 hr.
All the best to you guys!!
And Merry Christmas!!

So how long does it take to load a 160GB iPod using the Convert Higher ...

I have a 160GB Gen 5 that I bought when first released back in the day when they were $400. Through a number of changes, the most recent being the advent of the Convert Higher Bitrate Songs to 128bit AAC feature, I decided to look at what more music I could store. After all was said and done, I ended up with a bit of a disaster with cover art not being properly applied to the music being played. I decided to *restore the ipod* based on suggestions in the discussion boards, and equally important was following the hints and tips here.
http://www.samsoft.org.uk/iTunes/grouping.asp
The advice is especially important in very large library situations to ensure you have uniqueness in the albums you want to display. Hadn't really given it much thought until I had the ability to see the individual albums for the 40K songs on the iPod via the cover art view.
Finally the point of the post...
*So how long does it take to load a 160GB iPod using the Convert Higher Bitrate option now available in iTunes 9.1?* The specs on my computer are not highend by any stretch, but it's no slouch, and neither of the CPUs are ever pegged. At this point I've lost count of how much time it's taken, but the load is going on 3-4 days. With some breaks in between because I need to check each incremental load to verify there is no cover art corruption, correct bad tags and such, but for the most part the loading is visibly slow, and I'm sure the conversion is the cause. I'm not really complaining at this point, but there is clearly room for improvement. And of course unless there is a redo involved in which case I will get quite cranky.
*I would like to hear the experiences of others.*
Finally to lend a bit more credence to the performance concern, my 32GB iPhone 3GS for only about say 28GB of music takes about 24 hrs to load from a 2.2GHz dual core intel laptop, again using the convert higher bitrate option.

With AC power adapter it takes 3-4 hours for a full charge. With the USB charger it takes 9-0 hours for a full charge. I am not happy with them removing the AC charger and other accessoreis at all. It's business but it still stinks.
I know I would rethink my purchase but would most likely end up buying the Micro anyway

HT5071 After submission, how long does it take for a new book to appear in the iBook store?

How long does it take for a new book to appear in the iBook store after you have submitted it successfully? I submitted a free book last night. No sign of it 6 hours later ... If the delay is because process are being followed, what ate they? Any ideas?

5-10 days in November.

How long does it take for Apple to send the content code for a free upgrade to Mountain Lion?

Has anyone managed to successfully receive the content code in their email for a free ugprade to Mountain Lion?
I bought my MBP on 14 July so I qualified for the free upgrade. Went to the website and filled in the form along with my serial number about 2 nights ago. Still haven't received my content code yet. How long does it take? Should I be speaking to someone already? Who?
Thanks.

We are being advised it can take up to 72 hours !

Time machine migration, how long does it take?

Im going to migrate to another mac using time machine, how long does it take (time machine/main hdd in the old mac was at about 700gb capacity)

There is no way of determining that. The time is dependent on a number of different factors.
Barry

No i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

no i'm using iPhone 4 16GB. i want to know how long does it take for "Erase All Content and Settings"?does it affects to iPhone's hardware? and if i want to restore my software in iPhone back, how i can do it?

it takes hours
it does not damage or wear out hardware
and you can restore any backup afterwards as yo see fit

Formatting Seagate 1TB external drive - How long does it take?

Similar Messages

Maybe you are looking for