.Forms [32 Bit] Version 10.1.2.0.2 (Production) report server.

hi
i have a question about Forms [32 Bit] Version 10.1.2.0.2 (Production) so many users are facing the problem in report server and even i faced the problem,
i started the report server and tried to display the report but it was giving me errors sometimes
REP-41213 unable to connect to report server and sometimes
REP-51002: Bind to Reports Server <servername> failed and so on.
but after using an ip address or MS loopback adaptor then it works perfect.
in Forms [32 Bit] Version 9.0.4.0.19 (Production) its working with machine name and we do not need ip address and also we can start report server by services.
But in Forms [32 Bit] Version 10.1.2.0.2 (Production) its not the same and all the time we start report server by command.
Is there any solution in Forms [32 Bit] Version 10.1.2.0.2 that run report server without ip or loopback but only work with a machine name?.
sarah

Hi Sarah,
my reports-server works all the time, and i did not do any configuration or install any loopback-adapter. I have a reports-server name like rep_<machine> and can use that in forms also as in URL-syntax.

Similar Messages

I want to install webutil for Forms [32 Bit] Version 10.1.2.0.2 (Production

hi all
i want to install webutil for version Forms [32 Bit] Version 10.1.2.0.2 (Production) plz guide me with full of configurations .Already i searched the forum but i am still not able to install.Plz help me out.thanks in advance.
sarah
Edited by: SarahSarahSarah on Sep 13, 2009 11:58 AM

Fully agree with Michael's answer.
For all things webutil the best place to start is the webutil home page on OTN.
In appendix A of the webutil pdf there is a handy checklist.

Forms [32 Bit] Version 10.1.2.0.2 (Production) on Windows 2008

Hi ,
Can anyone tell me whether Dev suite 10g , (Forms [32 Bit] Version 10.1.2.0.2 (Production)) is certified with windows 2008 or not.
Rgds

Please check here http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
Cheers,

Can we use Forms [32 Bit] Version 10.1.2.0.2 (Production).

Hellow All.
Can we use Forms 10g [32 Bit] Version 10.1.2.0.2 (Production) Application in Forms[32 Bit] 10g R1?
Is it Possible?
Any help would be greatly appreciated.

I agree with Andreas
if you are using application server 10g r2 so the forms and reports runtime version is diffirent from oracle 10g 9.0.4 you should have the same developer suit version at your client pc example if you have oracle as 10g 9.0.4 your developer suite at your pc should be 9.0.4

Stacked Canvas question in Forms [32 Bit] Version 10.1.2.3.0 (Production)

Hi Friends, I am not sure if my explanation will suffice for resolution to this easy problem that is causing me so much grief.
I have a form with one content canvas ROOT_CNV, One tab canvas TAB_CNV with two tab pages and One STACK Canvas Stack_CNV.
All these canvases are on one Window ROOT_WINDOW.
The tab canvas (TAB_CNV) is tabular in nature.
There is a menu button that you can press that switches one record in the tab canvas and place this record in the stack_cnv. All the fields on the stack_cnv are mirror_image of the Tab canvas record that is the items are synchronised.
NOW THE PROBLEM. When you press the switch button and you are in the stack canvas and you try to query any record, the form will take you back to the tab canvas and the fields will freezes, there are lots of forms here with this functionality that woks, but I cannot figure out while this particular one is behaving lke this.
I have made the Stack canvas smaller, however, the issue is till the same, I think it has to do with the stacking order and I had already rearrange this to know avail, any suggestion will be appreciated.
Thank you.
Tab canvas
Page 1        Page 2
*===== ========*
record     proj              sub         Status
*1 A 1 ACTIVE*
*2 B 1 PENDING*
*3 C 1 ACTIVE*
*4 C 2 ACTIVE*
Click on the Menu Icon on record 1, then the stack canvas shows up (Stack_CNV) in a form Format
**STACK_CNV* Page1 Page2*
*===== =======*
Prog:       A                Sub : 1
Status :   ACTIVE
The tab pages still shows up on the stack canvas which is okay, however, when you try to query from the stack canvas, it takes you back to the tab canvas and everything freezes. Both canvas are on Root_cnv content canvas.

Hi Ade2
Pls Create a KEY-ENTQRY trigger at the form level add the following code :
GO_BLOCK('dept');
CLEAR_BLOCK(no_commit);
ENTER_QUERY;Hope this helps...
Regards,
Amatu Allah

Collection type supported in Oracle Forms Forms [32 Bit] Version 6.0.8.11.3

Hi
I am trying to call this from forms.
I am getting error no data found whenever this calles IF condition but from backend if run it from a script it works fine.
So I was thinking whether Forms PL/SQL version supports collection types.
I am using Forms [32 Bit] Version 6.0.8.11.3 (Production) for Oracle Application 11.5.10 version.
IF (p_emp_ids.COUNT > 0) THEN
FOR r IN v_emp_ids.FIRST..v_pkg_ids.LAST LOOP
Thanks in Advance

Is it just a a typo that the IF is on P_emp_ids and the loop is on V_em_ids?
However: the NO_DATA_FOUND exception suggests that you may be falling down a crack in your collection. If you have a missing element between FIRST and LAST you will get a no_data_found. Suppose these elements are there:
(1), (2). (3), (5), (6)
You will start at FIRST (1) and finish at LAST (6). But your loop on R will try to find the element at (4). Which isn't there. Oops...
To prove that's what's happening, you can wrap the inside of the loop with an exception handler
   BEGIN
      do the access to v_emp_ids(r)
   EXCEPTION
      WHEN NO_DATA_FOUND then (log a message with the value if R in it)
   END;If you want to walk a collection with gaps (a "sparse" collection), this is the way:
DECLARE
     r pls_integer;
BEGIN
     r := v_empids.FIRST
     LOOP
         EXIT when r IS NULL;
         do the business on v_empids(r);
         r := v_empids(r).NEXT;
     END LOOP;Now, why didn't this work in Forms, but did on the server? Possible reasons:
- your back end script was set up differently - so you had a dense collection (no gaps)
- Client side PL/SQL is different from server side (is it still version 1.x?)
HTH
Regards Nigel
Message was edited by:
nthomas

Installing Patch 18 on Oracle Forms [32 Bit] Version 6.0.8.11.3

I have Oracle Forms [32 Bit] Version 6.0.8.11.3 (Production) installed on Windows 7 64bit. It crashes abruptly with message "Oracle Forms Designer has stopped working". Google search showed to install Patch 18 for windows which may or may not solve the problem since its not certified with 64bit OS.
I tried to install Patch 18 and if I choose existing Forms 6i installation it stops saying "C:\Oracle\Forms6i is already used as an Oracle home for nt(1). It cannot be used as an Oracle home for nt". Installing in a new home didn't upgrade the Forms 6.0.8.11.3 to next level.
Any help regarding its installation or steps would be highly appreciated. Thanks!

If you know the patch number, search for the same on Metalink.

Forms Crashing Forms [32 Bit] Version 10.1.2.0.2 On Windows 7

Dear All,
Recently we have migrated all our Development PC's to Windows 7, and then after whenever we open any forms which is having more size the system is crashing. Does anybody have any solution for this .Currently we are working with XP MODE and this is also not a full proofed solution.
OS : Windows 7 Professional 32 bit
Forms Developer Version : Forms [32 Bit] Version 10.1.2.0.2
Thanks in advance.

It is likely that you are either not using a Professional release of Windows (i.e. "Home Edition") or have some other issue on your machine. Assuming you are in fact using one of the Professional releases of Win7 and believe that you have carefully followed the installation instructions which I previously mentioned, I would suggest you completely uninstall (including the manual deletion of any registry entries and directories in the file system) then reinstall. It is very important that you are in the "Administrator" group before attempting to install. The same is true when you attempt to use the Builder. Also, helpful would be to disable or relax Windows UAC before starting the installation.
As an alternative, consider installing and using Windows XP Mode (Windows Virtual PC)
http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7
http://www.microsoft.com/windows/virtual-pc/download.aspx

Download link for Forms [32 Bit] Version 6.0.8.12.1

Hi All,
please give me the URL to download Forms [32 Bit] Version 6.0.8.12.1.
Regards
Manish

Go to otn.oracle.com/products/forms and click on teh SOFTWARE link on the left.
Grant Ronald
Forms Product Management Grant,
I also urgently need the version 6.0.8.12.1
BUt the link you mentioned constains 6irel2nt.exe file. When installed it
is verions 6.0.8.11.3
What and where can I find a patch to make it 6.0.8.12.1
OR would i have any problem compiling programs in the 11.3 and run in runtime 12.1?
Many thanks on you advice!

Forms [32 Bit] Version 6.0.8.12.1 Download Link

Hi All,
Can i have the link to download Forms [32 Bit] Version 6.0.8.12.1 .
Regards
Manish

Go to otn.oracle.com/products/forms and click on teh SOFTWARE link on the left.
Grant Ronald
Forms Product Management Grant,
I also urgently need the version 6.0.8.12.1
BUt the link you mentioned constains 6irel2nt.exe file. When installed it
is verions 6.0.8.11.3
What and where can I find a patch to make it 6.0.8.12.1
OR would i have any problem compiling programs in the 11.3 and run in runtime 12.1?
Many thanks on you advice!

FRM-10095 in Oracle Forms Builder Forms [32 Bit] Version 9.0.2.9.0

Hello,
I got the error message (in German) "FRM-10095 AusfÃ¼hrung in iewbdc_oracle_to_id, um E:\f021w32\src\ie\iewbdb.c:715 fehlgeschlagen". I got this error, when I tried to create a forms block using the data block wizzard on the Oracle-OE-table "orders". I think the problem is, that in this table is a column with the data type "timestamp(6) with local time zone". Other tables without this datatypes work. Is the only solution to change the data type of this column or is there another solution?
Thank you
Ralf Nobes

Hi Sarah,
my reports-server works all the time, and i did not do any configuration or install any loopback-adapter. I have a reports-server name like rep_<machine> and can use that in forms also as in URL-syntax.

Forms [32 Bit] Version 10.1.2.0.2 question

In our database we have a field defined as NUMBER(8,3). In the form the field is defined with a Data Type of Number and has a format mask of 99,999.999 with no Lowest or Highest allowed value limitations. When I try to enter a value that has three decimal places (for example, 0.018), I get the FRM-40209 error that the field must be in the form 999G999G999D99. And if I insert a value with 3 decmal places directly into the database, on the form it gets rounded up to 2 decimal places. I don't have any code in the form that is enforcing this error, and I can't find anything else that would be doing this.

I added your message to the already existing on-error trigger in the form, and it shows the field I'm trying to enter the data into.*You didn't say exactly: What format mask does the On-error message I gave you report?
In the form, the field has the format mask of 99,999.999 and the error says the format mask is 999G999G999D00.*Not sure what you are reporting here. In the Forms Builder it is set to 99,999.999, and the FRM-40209 error message says it is 999G999G999D00, but what does my On-error code report?
Can you post the code for your when-validate-item triggers: All of them (item-level on the item, block-level and form-level)
I am curious what is in your On-error trigger, too.
...Oh, wait. I just noticed you wrote:
or any of the code in the menu its on that would be resetting the format mask*So you have some phantom code changing the format mask??? If that is the case, search the form and all its attached libraries for "SET_ITEM_PROPERTY" followed by "FORMAT_MASK". I would be extremely wary of ANY code that horses around with format masks.
You could also use the "get a bigger hammer" method, and set the format_mask the way you want it in the item's when-new-item-instance trigger or maybe a when-new-block-instance trigger.

Possible bug in Forms [32 Bit] Version 6.0.4.10.0 (Beta)

Problem : If a block value is refered in
a LOv - record group query
the form cannot adjust the out put .. and
is not generating.....
Record group query which works :
select security_role, sec_role_desc, database_role
from security_role
where wnd_appln = 'XXXXXXXXX'
order by security_role, database_role
Record group query which is not working :
select security_role, sec_role_desc, database_role
from security_role
where wnd_appln = :APP_ROLES_BK.wnd_appln
order by security_role, database_role
Error Generated :
FRM-30064: Unable to parse statement icrgg/icrggc: hicrg.
Record Group SECURITY_ROLE_LOV
Form: EMPLOYEE
FRM-30085: Unable to adjust form for output.
Table structure :
CREATE TABLE security_role
security_role VARCHAR2(15) NOT NULL,
sec_role_desc VARCHAR2(20) NOT NULL,
open_nsr VARCHAR2(1),
open_pkt VARCHAR2(1),
chg_wk_grp VARCHAR2(10),
asgn_anlst VARCHAR2(10),
updt_oth_wkgp_pkt VARCHAR2(1),
admin_tasks VARCHAR2(1),
create_po VARCHAR2(1),
billing_changes VARCHAR2(1),
invoice_changes VARCHAR2(1),
change_owner VARCHAR2(1),
wnd_appln VARCHAR2(15),
database_role VARCHAR2(20)
PCTFREE 10
PCTUSED 40
INITRANS 1
MAXTRANS 255
TABLESPACE wa0dat0t01
STORAGE (
INITIAL 32768
NEXT 8192
PCTINCREASE 0
MINEXTENTS 1
MAXEXTENTS 121
w@w Lebon Mathew
WellsFargo - Telecom Applications
(415)-477 6445
null

I drilled down the proble further and identified that i can
recreatr the problem in any 7.3.4 database ....
But in 8.0.5 it's working fine .....
Is developer 6.0 is going to support Oracle 7.3.4
it'll be highly appreciated if any one from Oracle development
team can give me a response
Thanks in advance...
Lebon Mathew (guest) wrote:
: Problem : If a block value is refered in
: a LOv - record group query
: the form cannot adjust the out put .. and
: is not generating.....
: Record group query which works :
: select security_role, sec_role_desc, database_role
: from security_role
: where wnd_appln = 'XXXXXXXXX'
: order by security_role, database_role
: Record group query which is not working :
: select security_role, sec_role_desc, database_role
: from security_role
: where wnd_appln = :APP_ROLES_BK.wnd_appln
: order by security_role, database_role
: Error Generated :
: FRM-30064: Unable to parse statement icrgg/icrggc: hicrg.
: Record Group SECURITY_ROLE_LOV
: Form: EMPLOYEE
: FRM-30085: Unable to adjust form for output.
: Table structure :
: CREATE TABLE security_role
: security_role VARCHAR2(15) NOT NULL,
: sec_role_desc VARCHAR2(20) NOT NULL,
: open_nsr VARCHAR2(1),
: open_pkt VARCHAR2(1),
: chg_wk_grp VARCHAR2(10),
: asgn_anlst VARCHAR2(10),
: updt_oth_wkgp_pkt VARCHAR2(1),
: admin_tasks VARCHAR2(1),
: create_po VARCHAR2(1),
: billing_changes VARCHAR2(1),
: invoice_changes VARCHAR2(1),
: change_owner VARCHAR2(1),
: wnd_appln VARCHAR2(15),
: database_role VARCHAR2(20)
: PCTFREE 10
: PCTUSED 40
: INITRANS 1
: MAXTRANS 255
: TABLESPACE wa0dat0t01
: STORAGE (
: INITIAL 32768
: NEXT 8192
: PCTINCREASE 0
: MINEXTENTS 1
: MAXEXTENTS 121
: w@w Lebon Mathew
: WellsFargo - Telecom Applications
: (415)-477 6445
null

Forms [32 Bit] Version 6.0.5.0.2 :: BLock based on stored procedure

Trying to develop a form having a block based
on stored procedure. My form works fine if
the stored procedure having REF CURSOR as one
of the argument but if I am using dynamic SQL
in my procedure I can not use Strong REF CURSOR, so I had to use Pl/Sql Table as one of the parameter in the proceudre.
In that case when I run my form and Execute the query it just comes out of the form without displaying anything and also it doesn't throw any error.
Don't know what I am doing wrong.
Pl. Help...
null

I drilled down the proble further and identified that i can
recreatr the problem in any 7.3.4 database ....
But in 8.0.5 it's working fine .....
Is developer 6.0 is going to support Oracle 7.3.4
it'll be highly appreciated if any one from Oracle development
team can give me a response
Thanks in advance...
Lebon Mathew (guest) wrote:
: Problem : If a block value is refered in
: a LOv - record group query
: the form cannot adjust the out put .. and
: is not generating.....
: Record group query which works :
: select security_role, sec_role_desc, database_role
: from security_role
: where wnd_appln = 'XXXXXXXXX'
: order by security_role, database_role
: Record group query which is not working :
: select security_role, sec_role_desc, database_role
: from security_role
: where wnd_appln = :APP_ROLES_BK.wnd_appln
: order by security_role, database_role
: Error Generated :
: FRM-30064: Unable to parse statement icrgg/icrggc: hicrg.
: Record Group SECURITY_ROLE_LOV
: Form: EMPLOYEE
: FRM-30085: Unable to adjust form for output.
: Table structure :
: CREATE TABLE security_role
: security_role VARCHAR2(15) NOT NULL,
: sec_role_desc VARCHAR2(20) NOT NULL,
: open_nsr VARCHAR2(1),
: open_pkt VARCHAR2(1),
: chg_wk_grp VARCHAR2(10),
: asgn_anlst VARCHAR2(10),
: updt_oth_wkgp_pkt VARCHAR2(1),
: admin_tasks VARCHAR2(1),
: create_po VARCHAR2(1),
: billing_changes VARCHAR2(1),
: invoice_changes VARCHAR2(1),
: change_owner VARCHAR2(1),
: wnd_appln VARCHAR2(15),
: database_role VARCHAR2(20)
: PCTFREE 10
: PCTUSED 40
: INITRANS 1
: MAXTRANS 255
: TABLESPACE wa0dat0t01
: STORAGE (
: INITIAL 32768
: NEXT 8192
: PCTINCREASE 0
: MINEXTENTS 1
: MAXEXTENTS 121
: w@w Lebon Mathew
: WellsFargo - Telecom Applications
: (415)-477 6445
null

Download patch for oracle dev 6i Forms [32 Bit] Version 6.0.8.13.0

I need to update, only patch, for oracle DEV. 6i that come with ora db 9i rel 2

If you know the patch number, search for the same on Metalink.

.Forms [32 Bit] Version 10.1.2.0.2 (Production) report server.

Similar Messages

Maybe you are looking for