Forms 6i is not connecting with Oracle 11g database?

Forms 6i is not connecting with Oracle 11g database?
How to resolve this issue?

Hi,
Once you installed the Forms and Reports, you need to configure the paramters like tnsnames.ora in you path.
There will be one folder in the Installation path of Forms and Reports search for tnsnames.ora file..and you need to Updated the file as per the which ORACLE Server you are connecting and then try.. it..
Default path for forms will be "ORACLE_HOME/net80/admin".. search for tnsnames.ora and modify it..
- Pavan Kumar N

Similar Messages

Failover not working while connecting to Oracle 11g database

Hi,
We have a J2EE application that connects to Oracle 11g database.
The connection URL we are using is as below
jdbc:oracle:thin:@(DESCRIPTION =(SDU=32768)(ADDRESS=(PROTOCOL=TCP)(HOST=abc.hostname.com)(PORT=1525))(ADDRESS=(PROTOCOL=TCP)(HOST= xyz.hostname.com)(PORT=1525))(CONNECT_DATA=(SERVICE_NAME=PQR)))
The issue that we are facing is, the database failover is not working.The application only connects to the first host in the TNS entry.Evertime there is a failure in the connection to the first host,manual steps are required to swap the hosts.
This started happening after we upgraded Oracle DB from 9i to 11g.
We are using the client jar of 9i to connect to 11g. Could this be causing the problem?
Thanks In Advance.
-Tara

889517 wrote:
Yes, you are right. Nothing else was updated.
The application still works as expected except the failover.If you are correct then I seriously doubt it has anything to do with java. It would be something to do with Oracle and/or network infrastructure.
If not then it is some small problem with the driver. You can try updating the driver but I wouldn't expect a fix.

Oracle Tuxedo 8.1 With Oracle 11g Database

Hi,
I have an old application that must be compiled with oracle 8.1 and Oracle9i Database.
We are migrating to Oracle 11g Database, and now we have some inssues to compile with Oracle 11g Database. For example some Libraries that the Tuxedo XA Resource Manager needs from the Oracle Database, that just u can found on older versions like Oracle9i (kpudfo.o file).
what can be the solution for that problem?
An Oracle 11g database config or a Tuxedo config ?

Hi,
When you say "Tuxedo XA Resource Manager" I'm not sure what you are referring to. Do you mean the Tuxedo transaction management servers (TMS) servers that are built with the buildtms command? If so, if there are linking errors, it has to do with either your library paths or the RM definition for Oracle Database in the $TUXDIR/udataobj/RM file. Tuxedo itself only uses the XA switch from the resource manager such as Oracle database. Now the resource manager may require a bunch of libraries, which is why I suggested you check your library path. If the above doesn't help, can you post the error you are getting and what is generating/creating the error?
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Which latest web logic server compatible with oracle 11g database

which latest web logic server compatible with oracle 11g database >is weblogic server 12c is compatible with oracle 11gR2

current environment= forms and reports 10g and database 10gR2,os windows 32-bit.
wants to implement and configure as below:
server1: web-logic server 12c with forms and reports upgrade from 10g to 11g where os 64-bit windows.
server2: upgrade and migrate from 10gR2 11gR2 from windows xp to windows 2008-R2.
how to achieve this.what step should perform first.

Devloper form 6i not connect with oracle 8i

hi master
sir i have devloer form 6i and newly install oracle 8i database but my form not connect with database
how i connect with database
please give idea
thanking you
aamir

change the tnsnames.ora you're forms 6i is using. Usually in the net80\admin path of your forms 6i home.

Not able to connect to oracle 11g database source through OBI Server

Hi,
I am having an issue regarding the database connectivity.
Iam unable to connect to the oracle 11g database through OBI server. However its connecting through SQL Plus with same username/password@hoststring. Its giving the error as :
[nQSError: 17001]Oracle Error code:1017,message:ORA-01017: invalid username/password; logon denied at OCI call OCILogon
[nQSError: 17014]Could not connect to Oracle database.
Please help me out in resolving the issue.

If it's working in one place and not the other then it's obviously not an OBIEE problem.
Are you typing it in right??
Do you have multiple tnsnames.ora files pointing to different databases, maybe sqlplus is picking up one and toad & OBIEE the other and so the username/pw is wrong for that database?
There's a limited amount that can be said to help, as the error is 100% clear what the problem is :) it's just working out whether you're connecting to the database that you think you are connecting to, and then whether the username & PW you're entering is correct for that DB.
BTW OBIEE 10.1.3.4 is supported with 11g, and we're using it without problem here.

Error connecting to Oracle 11g Database

Hi All
I am testing .NET connectivity to Oracle 11g and I am not successful for a while.
I've tried to connect to database using library included in Oracle 10.2.0.3 Client and as a result I've got "invalid username or password" error. Then I've tried to use ORAC 11.1.0.5.10beta. I successfully connected to the server, but when I try to exec any query my program hangs.
Both of them work correctly with Oracle 9i database.
Also I've tried Microsoft .NET provider and it connects and executes queries fine (though 3 times slower).
How do you think what is reason or how can I find the reason?

Hi All
I am testing .NET connectivity to Oracle 11g and I am not successful for a while.
I've tried to connect to database using library included in Oracle 10.2.0.3 Client and as a result I've got "invalid username or password" error. Then I've tried to use ORAC 11.1.0.5.10beta. I successfully connected to the server, but when I try to exec any query my program hangs.
Both of them work correctly with Oracle 9i database.
Also I've tried Microsoft .NET provider and it connects and executes queries fine (though 3 times slower).
How do you think what is reason or how can I find the reason?

Problem connecting with Oracle 9i Database

Hi Gurus,
I'm having problems with connecting to Oracle 9i Database.
I have a newly installed XML Publisher running on Windows XP SP3.
I can't get my data source connected to other server running Oracle Database 9i.
It keep on saying "Could not establish connection"
Im using jdbc:oracle:thin:@host:port:sid format , username/password are correct.
What seems to be the problem?
Hoping for your help.
Thanks

Hi Steve,
Let me clarify. I had an Oracle XML Publisher installed in my laptop (Windows XP SP3). I want to configure my XML Publisher to connect to a server
where Oracle Database is installed (Oracle 9i DB). I can connect to this database using SQL Plus, SQL Developer. My problem is that after configuring the JDBC connection in XML Publisher, i still can't connect to the said oracle db. The info are correct SID, Hostname etc. and still can't connect.
Hope this clarifies the situation.
Thanks

Can Oracle 8.0.6 reports connects to Oracle 11g Database

Hi,
I know Oracle 8.0.6 report is already out of support. I want to build some environement. In this context, I want to know, where Oracle Reports 8.0.6 can connect to Oracle 11g R2 database ?
Pl suggest me urgently.
thanks & regards
parag

First of all: using the word 'urgently' is inappropriate and rude in a forum of volunteers.
Edit your post and apologize publicly for using it.
Secondly your question is a rhetorical one, as it's answer is:
OF COURSE NOT
8.0.6
was succeeded by
8.1.5
8.1.6
8.1.7
9.0.1
9.2.0
10.1.0
10.2.0
11.0.1
11.0.2
NINE releases in between!!!
Sybrand Bakker
Senior Oracle DBA

Issue in Connecting to Oracle 11g Database

Hi,
I have installed Oracle 11g database using loopback adapter. (used ip 10.10.10.10). In the drivers file did the following entry
ipaddress computername.domainname.com computername
How can I connect to this database from other computer in the network ex:using sqldeveloper? (When I try it says "Network adapter couldnt establish the connection")
Thanks,
Ramesh

from other computer in the network Oracle version on that computer ?
Did you configure a connection string on that computer ? If so, please post your tnsnames.ora. If not, what did you do exactly ?
Also, from the server post the result of "lsnrctl stat".

Sql Developer not connecting to Oracle 11g

hi all
i have
windows 7 ultimate 64bit
Oracle 11g 64bit
Sql Developer 3
on same machine i have created Tow Database on 11g :
ORCL
ORCL2
when it was ORCL only everything was Okay
but recently i have created another database ORACL2
then it stop connecting with database through SQL DEveloper
shows error;
IO Error: the network adapter could not establish the connection
On commnad prompt
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=AStix-PC)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL>
LSNRCTL> start
Starting tnslsnr: please wait...
Service OracleOraDb11g_home1TNSListener already running.
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
How to resolve this issue
please help me out
thanks to all

884559 wrote:
Have you fixed this issue?
i m having same problem,i tried so mamy things but i was not able to fix it,
so i uninstalled oracle and reinstalled it so it startd working fine,
but agin after 10-15 days this problem started.
from sqlplus i m able to connect but not using any other 3rd party IDE.
i have also installed one instant client.
Thanksno dear yet it's not fixed
i have focused my mind on my work instead of R & D
which is unexpected .. that ..no body is here for help...
thanks

ORA-03114 not connected with Oracle when I execute Query

Hi!
I have a Problem with Oracle 9 but I don't know what wrong.
When I execute this query I get an error everytime:
select * from
perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where pl.von < sysdate
and
pl.id not in
select idperleist from rechaus
where buch_schl <> 'STRN'
It's not the complete select but the point is I use
"left outer join leikat l on pl.lsnr = l.lsnr"
( not the (+) - Opoerator) and a "not in" -Clausel.
Without the "not in" -Clausel the select runs fine.
Sorry for my bad english g
Thx for help :)
Michael

Hi!
My Selection doesn't run :((
The Selection runs with (+) -Join and not with "left outer join" .
i need the "left outer join" couse the Application runs on Oracle
and Interbase with same Selections. Other Selections with "left outer Join"
are running under my Oracle 9.2 Database.
Here something I tested:
Selection runs with (+)- Join and count ():
select count(pl.id) anz
from perleist pl , leikat l
where
pl.lsnr = l.lsnr (+)
--left outer join leikat l on l.lsnr = pl.lsnr
and (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Runs without count() and with "left outer join" :
select --count(pl.id) anz
from perleist pl
left outer join leikat l on pl.lsnr = l.lsnr
where (pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Error ORA-03114 when usinf count () and
"left outer join":
select count(pl.id) anz
from perleist pl
left outer join leikat l on l.lsnr = pl.lsnr
where
(pl.von <= to_date('30.09.2002', 'DD.MM.YYYY')) and (pl.bis >= to_date('01.09.2002', 'DD.MM.YYYY'))
and (l.RelAbr = 1)
and (pl.AufnNr = 13464)
and (pl.id not in (select idperleist from rechaus where ((BuchSchluessel <> 'STRN') or (BuchSchluessel is null)) and (StornoDat = to_date('30.12.1899', 'DD.MM.YYYY')) and (AbrJahr = 2002) and (AbrMonat = 9)))
Selection runs without "not in"
Selection runs without count()
Selection runs with (+) and not with
"left outer join"
Thx for help :)
MD

Could not connect with Oracle 9iAs Portal

I have already install oracle9iAs ,but when I try to connect to
oracle 9i AS portal , the server return these messages to me :
Proxy log On failed.
Please verify that you have specified correct connectivity
information i.e.username, password & connect-string in the
Database Access Descriptor
Error-Code:6401
Error TimeStamp:Thu, 18 Oct 2001 08:22:24 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address
supplied or destination is not listening. This error can also
occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD
for this URL is valid and the database listener is running. "
How could I do ???
Thank you !

Shi
Check out the FAQ document on portalstudio:
http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm#Inst
allation
And Troubleshooting section of the Configuration Guide:
http://otn.oracle.com/docs/products/ias/doc_library/1022doc_otn/p
ortals.102/a90096/toc.htm

Error configuring shared services with Oracle 11g database

I've installed Hyperion EPM 11.1.1.3 and orale 11g successfully. My problem though is that when i tried to do the configuration,
the error message states 'Unable to check Shared Services database existence: an error occured.'
---------My Environment:--------
EPM Server: Windows Server 2003 SP1 32-bit
RDBMS: Oracle Enterprise Edition 11g (running on same server 2003)
Oracle Client: 11g (full client install)
SID name :- orcl
------------Here are the components that I've installed--------
- V17397-01(EPM Foundation Services p-1)
- V17369-01(EPM Foundation Services p-2)
- V17370-01(EPM Foundation Services p-3)
- V17371-01(EPM Foundation Services p-4)
- V17389-01(server)
- V17388-01(Client)
- V17390-01(Provider Service)
- V17378-01(Financial Reporting)
- V17380-01(Web Analysis)
- V17398-01(EPM Architect)
- V17402-01(Smart View for Office)
all files are extracted in a single folder using winrar tool.
I can't proceed with the shared services configuration because in just the first page of it, I'm encountering the error Unable to check Shared Services database existence: an error occured.'
I believed the shared services is bundled with the foundation if I'm not mistaken, because I can't find any download related to it on edelivery site.
I tried to configure only the Foundation components but the '*Comman setting*' & '*configure database*' are grayed out so I have no option but to figure out first this shared services configuration.
below are the logs
---------------configtool.log--------------
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, connect test
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, driver set
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, server= hyperion
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, whiteSpace remove
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, begin test cycle
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, define driver
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, make connection
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState, DEBUG, set URL
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, connection is NOT null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.DBConnectionForm, DEBUG, DB type string = Oracle
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, JDBC driver class is hyperion.jdbc.oracle.OracleDriver
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.AbstractProductDBConfigurator, DEBUG, Connection URL: jdbc:hyperion:oracle://hyperion:1521;SID=orcl
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, DEBUG, validate CREATE_NEW, no registry DB exists, create it
(Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges CAUSE null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
------------configtool_err.log------------
(Jul 04, 2010, 02:53:29 AM), com.hyperion.hit.registry.RegistryConnection, ERROR, SQL Exception [Hyperion][Oracle JDBC Driver][Oracle]ORA-01031: insufficient privileges
CAUSE null
(Jul 04, 2010, 02:53:29 AM), com.hyperion.config.wizard.impl.RegistryWizardState$1, ERROR, com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
(Jul 04, 2010, 02:53:29 AM), com.hyperion.cis.config.wizard.adapter.WizardFormAdapterPanel, ERROR, Unable to check Shared Services database existence: an error occured.
Hope to here from Some one.
Any help would be appreciated. Thank you.

Thanx John for your kind reply. i reffred your other posts and those are very helpfull for me.
I don't have any previous ver. of Hyperion. and i created a new database 'Orcl' for configuring the shared services and given the user name as 'hss'. i also tried to delete my old database and and reg.properties file from Hyperion Dir u suggested in some other post. but still its not working.
Today I have started again with fres installation of Windows Server 2003 oracle 11g EPM 11.1.3.
Also I m Installing this on VMware. I hope this is not the issue as i already installed Microsoft Loopback Adapter.
I will let you know the updates.
but still looking forward for your Kind help.
Edited by: Gaurav_Choudhari on Jul 5, 2010 12:37 AM

JDBC Drivers for Weblogic to connect to Oracle 11g database

WebLogic Server Version: 10.3.6.0
We had Oracle 10g database that we were connecting using JDBC data source (driver : Oracle's Driver (Thin XA) for instance connections; versions:9.0.1 and later). We migrated our database to 11g now. Is it still the best driver to connect to 11g database or should we change it to something else?

why not using an 11 driver to connect to db 11g?
maybe the following posting helps although is focuses on db 12c:
https://blogs.oracle.com/WebLogicServer/entry/part_1_12c_database_and
best wishes.
Blog: Oracle Fusion Middleware and Cloud Computing

Forms 6i is not connecting with Oracle 11g database?

Similar Messages

Maybe you are looking for