Forms values are not displayed correctly

This is happening on the client view. I have a custom form and after some Windows updates on user's laptop, the text field values started stopping to display in the form. If I click on View mode then the text values shown and change back to Edit the form
now text values show up in the text field.
Another thing is when trying to print the view out, text values are not shown up at all. I tried to upgrade user to IE11 and same issue. Using Firefox then text values are shown in print preview but not in Editing. I don't want users to use different browser
rather than IE.
Any thoughts on this would be much appreciated.

Hi,
Since the issue happens after some Windows Updates, I would suggest the user log on another machine and see if the issue persists. If the issue only happens on this laptop, you can manually uninstall the update patch you doubt to test
the issue. Go to Control Panel->Programs and Features->View installed Updates->”right click” and “uninstall”.
Meanwhile, add the SharePoint sites to a trusted zone in IE settings.
Thanks.
Tracy Cai
TechNet Community Support

Similar Messages

  • Heirarchy values are not displaying correctly in report.

    Hi,
    I am having a heirarchy field in my report.
    I have 2 local RKF's in my report and 2 manadatory variables(which are FISCAL YEAR AND CAL MONTH).
    When i am executing the report , it is displaying the Heirarchy values with respect to one restricted KF.
    The heirarchy values correspoding to other RKF are not getting displayed properly, it is showing as (NOT Assigned).
    Its giving the correct values for the RKF's but not showing the  heirarchy values.
    I hided the 2nd RKF, then also its showing in the same way.
    Please help me on this,
    Thanks in advance!

    Hi, Saro,
    >
    I have taken a std. report to customize, and the name of the report is Asset Retirements from Fixed Asset module.
    From the existing base query, i have added some query to customize it.
    I have summed  the cost column in the report using summary column.
    For example, im passing a parameters which displays 5 lines in the report output. Im getting the cost value correctly in all the 5 lines, but when i tried to sum all the 5 lines, it is taking the first line of cost value and it is not summing the cost value of all the 5 lines in the report. I dont know why this problem occurs.
    Summary column should be place one level up of the query and set the following values under summary
    Function
    Source
    Reset As

  • Boolean values are not displaying correct

    hi ..
    i have created a application which has one report .. in report field
    there's boolean field (true or false) when i run my application
    it will show the correct results...
    but when host the application in IIS7 then the result will not
    show correct value .. it is showing only true...
    if there's a value false also it is showing true only...
    what to do.... ?

    hi..
    I have developed an web application
    i am using SAP crystal report 13 for VS2010
    and i have hosted that application in iis 7
    It is been developed in c#.net ..
    OR
    i have one solution ...
    can we create a formula so that if the value is
    0 then it should show false and if the value is
    1 it should show true... in formula field...

  • Percentage Values are not displayed correctly when Calculated Item feature

    I have developed an OBIEE answer with multiple pivot tables. Each of the Pivot Tables contains a mix of $ Amount and Percenatge columns. I have to display the totals as the last row of each Pivot Table. For reasons I am yet to figure out, some of the totals were not working. Hence, I used the "Calculated Item" feature with sum(*) as the formula to get the Totals. This is giving me the correct results for $ Amount columns but not for the % columns.
    The system seems to be summing up the row-level percentages to arrive at the total percentage, which is not the expected bhavior.
    Sample data:
    Products| Dist. FG| VPE %| Mfg. FG| Mfg. FG VPE %
    Product1| $58| 1% | $1 | 100%
    Product2| $45| (0%) | $36 | 24%
    Product3| $22| 0% | $12 | (40%)
    Product4| $1 | (0%) | $9 | 0%
    Product5| $41 | 2% | $15 | 15%
    Total | $166 | 3% | *$73* | *100%*
    Total - Calculate Item (sum(*))
    Total Mfg. FG - Correct
    Total Mfg FG VPE% - Incorrect (Expected value is ~ 9 %)

    Thanks for the response, Andre.
    As I mentioned, The default total row is not producing the correct results for reasons I am yet to figure out.
    We are using OBIEE 10g (10.3.4)
    Percentages work well with default total, but here we need the same result through the calculated item.

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • Entity Descriptions are not displayed correctly in Combo box dropdown list

    In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
    Example:
    'Entity A. LTD' becomes 'LTD'
    'Entity B Inc.' becomes blank
    It seems that everything before the dot is not displayed when opening the combobox.
    It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
    Does anybody knows the sollution or have seen this issue before?

    Hi,
    This is a known issue with combo box list of values.
    Please follow this workaround:
    - Remove ComboboxLOV on Deptno
    - Create an updateable transient attribute(Say Dname) of type String
    - Define combobox lov with following values:
    List Data Source: DeptView1
    List Attribute: Dname
    List Return Values:
    Dname - Dname
    Deptno - Deptno
    UI Hints: Display Attribute - Dname
    - Edit Dname(transient attribute) and provide following groovy expression
    oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
    return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
    Sireesha

  • Service order values posted to WBS, values are not displaying in CJii3

    Hi,
    We have posted thevalues from service order to wbs.
    values are not displaying in cji3.
    Regards,

    Hi,
    If the data has been successfully loaded into BPC, then it should be visible in BPC report.
    You need to make sure that you are looking at the correct data region. Check in RSA1 and check which data region has the data. Maintain the same region in the report as well.
    Hope this helps.

  • Umlauts are not displayed correctly in different programs

    Hello!
    I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
    I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
    Look at this example
    The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
    This is my locale
    locale
    LANG=en_US.UTF-8
    LC_CTYPE="en_US.UTF-8"
    LC_NUMERIC="en_US.UTF-8"
    LC_TIME="en_US.UTF-8"
    LC_COLLATE="en_US.UTF-8"
    LC_MONETARY="en_US.UTF-8"
    LC_MESSAGES="en_US.UTF-8"
    LC_PAPER="en_US.UTF-8"
    LC_NAME="en_US.UTF-8"
    LC_ADDRESS="en_US.UTF-8"
    LC_TELEPHONE="en_US.UTF-8"
    LC_MEASUREMENT="en_US.UTF-8"
    LC_IDENTIFICATION="en_US.UTF-8"
    LC_ALL=
    When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
    Do you understand my problem? What can I do?
    Thanks!
    Last edited by cyberius (2011-02-19 10:12:19)

    Did you check the locale settings on your Windows machine?

  • Search for member activities - points are not displayed correctly

    Hi experts,
    I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
    Can anyone tell me why the points in the result list are not displayed correctly?
    Thanks and best regards
    Anne

    Sometimes threads are deleted if they violate the Rules of Engagement.  If that happens, you'll lose points that were allocated to you.  Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this.  I'd guess, it's more likely you'd responded to a post that broke the rules.
    Really important
    1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable). 
    2. Don't ignore rejection emails or other communications from moderators.  They are followed up, and, if warnings are ignored, then accounts will be deleted.  Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
    matt

  • Thumbnails are not displayed correctly in Firefox, but displayed correctly in Safari and G. Chrome

    Firefox display problems regarding this customers site:
    http://gardenia.dk/collections/collection/
    Thumbnails are not displayed correctly in Firefox - only a tiny bit of the picture is visible, incorrect scale (displayed correctly in Safari and Google Chrome).
    Can I do anything to make it work in Firefox, too?
    Kind regards,
    Annette

    This article might help you-
    https://support.mozilla.org/en-US/kb/websites-look-wrong-or-appear-differently

  • Permissions are not displaying correctly on Yosemite server

    My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
    I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share.  When checked from the server's finder, everything looks correct.  The server is setup for both AFP and SMB on file sharing.  I have also tried setting permissions from the server's finder and seemed to make no difference.
    When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group.  Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
    The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
    Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • With IE UIX buttons are not displayed correctly

    Hello there,
    We have developed an application using UIX. While browsing application using Internet Explorer I noticed that many of the buttons are not displayed correctly. Only some part of the button is displayed. Same thing happens while displaying some of the page logos and stuff. Did anyone have same problem? What's solution?
    Thanks,

    Hi Andy,
    sometimes half of button is displayed and sometimes the whole button image is distorted. if you refresh the page, it becomes perfectly fine. sometimes nothing is displayed but if you put mouse at the place where there should be a button, you would know that there is a button...
    it happens with random buttons...
    i haven't seen this problem in mozilla. its quite frequent in IE.
    our customer is very annoyed by this problem :(

  • Scientific fluorescence figures are not displayed correctly on iPad

    I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
    I am really disappointed. So, is there any solution?
    Many thanks.
    On MacBook Pro
    On iPad 1

    I am woundering if anyone can suggest any solution? Thank you.

  • Form values are not submitting to ActionForm class

    Hi All,
    I have a problem with <html:form> tag. When i am submitting the form using the submit button it is going to the Struts-config.xml file and getting the action mapping for the HazSummary.do. It is getting the HazardSummaryAction class and getting the input from HazardSummary Form class. If result is sucees it is going to the next jsp page.
    All above things are happening properly. But the form values are not getting in to the HazardSummaryForm.jav.
    Here in this case Action class is HazardSummaryAction.java, Action Form class is HazardSummaryForm.java and jsp page is Hazard.jsp.
    Here is the code for Hazard.jsp
    <html:form action="/HazSummary.do">
    <table width="100%" border="0" style="border-collapse: collapse" bordercolor="#111111" cellpadding="0" cellspacing="0">
         <tr colspan="4"><td>
         <%String jd="jmd";
         String st="closed";%>
         <input type="text" name="wkploc" value=<%=jd%>>
         <input type="text" name="hastat" value=<%=st%>>
    <html:submit property="action">
    <bean:message key="haz.save.label"/>
    </html:submit>
         </td></tr>
    </table>
    </html:form></body>
    Here is the code for HazardSummaryAction.java
    package com.prospecta.WSOProject.action;
    import java.io.IOException;
    import javax.servlet.ServletException;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpSession;
    import org.apache.struts.action.Action;
    import org.apache.struts.action.ActionForm;
    import org.apache.struts.action.ActionForward;
    import org.apache.struts.action.ActionMapping;
    public class HazSummaryAction extends Action{
         public String hazstatus;
         public String workplace;
         public String prin1;
         public ActionForward execute(ActionMapping mapping, ActionForm form, HttpServletRequest request, HttpServletResponse response) throws IOException, ServletException
              HazardSummaryForm hsf = new HazardSummaryForm();
              HttpSession session = request.getSession(true);
         try{
         hazstatus=hsf.gethastat();
         System.out.println(hazstatus);
         workplace=hsf.getwkploc();
         System.out.println(workplace);
         session.setAttribute("stat",hazstatus);
         session.setAttribute("loc",workplace);
         return mapping.findForward("success");
         catch(NullPointerException nex){
              return mapping.findForward("failure");
              }catch(Exception e)
         e.printStackTrace();
         return mapping.findForward("failure");
    Here is the code for HazardSummaryForm.java
    package com.prospecta.WSOProject.action;
    import org.apache.struts.action.ActionForm;
    public class HazardSummaryForm extends ActionForm {
         public String wkploc;
         public String hastat;
         public void setwkploc(String wkploc)
              this.wkploc=wkploc;
         public String getwkploc()
              return this.wkploc;
         public void sethastat(String hastat)
              this.hastat=hastat;
         public String gethastat()
              return this.hastat;
    Here is the code for Struts-config.xml file
    <?xml version = '1.0' encoding = 'windows-1252'?>
    <!DOCTYPE struts-config PUBLIC "-//Apache Software Foundation//DTD Struts Configuration 1.1//EN" "http://jakarta.apache.org/struts/dtds/struts-config_1_1.dtd">
    <struts-config>
         <form-beans>
    <form-bean name="HazSumForm"     type="com.prospecta.WSOProject.action.HazardSummaryForm">
                   <form-property name="wkploc" type="java.lang.String"/>
                   <form-property name="hastat" type="java.lang.String"/>
         </form-bean>     
         </form-beans>
    <action-mappings>
    <action path="/HazSummary" input="/HazSumForm" name="HazSumForm" scope="request" validate="false" type="com.prospecta.WSOProject.action.HazSummaryAction">
                   <forward name="success" path="/HazardSummary.jsp"/>
                   <forward name="failure" path="/Hazard.jsp"/>
              </action>                                         
         </action-mappings>
         <controller processorClass="fr.improve.struts.taglib.layout.workflow.LayoutRequestProcessor" locale="true"/>
         <message-resources parameter="com.prospecta.WSOProject.ApplicationResources"/>
         <plug-in className="org.apache.struts.tiles.TilesPlugin">
              <set-property property="definitions-config" value="/WEB-INF/tileDefinitions.xml"/>
         <set-property property="moduleAware" value="true"/>
         <set-property property="definitions-parser-validate" value="false"/>
         </plug-in>
         <plug-in className="org.apache.struts.validator.ValidatorPlugIn">
         <set-property property="pathnames" value="/WEB-INF/validator/validator-rules.xml,/WEB-INF/validator/validations.xml"/>
         </plug-in>
    </struts-config>
    i followed the same process for previous pages which they are working. But in this case it was not working properly.
    Please resolve this problem ....................

    Hi Sreelatha,
    When you develop any interactive form please keep in mind the below things which you need to check:
    1. The layout type of the form should be ZCI. Select it from the form properties tab in SFP t-code.
    2. In web dynpro application (in case you are using for the form), the form type should be selected as native.
    3. In the form layout insert web dynpro script using menu->utilities->insert web dynpro script.
    4. After that come out of the form and run the report FP_ZCI_UPDATE giving your form name, also select the update check box in the report.
    Once these things are done your form should work fine.
    Regards,
    Vaibhav

  • Oracle Table Values are not displayed when tried to display with Essbase

    Hi,
    I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
    I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
    Please help.
    Regards,
    Paresh

    Hi,
    Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
    If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
    **************BIND THE ITAB ****************************
    DO 2 TIMES.
    APPEND LW_LFBK TO LT_LFBK.
    CLEAR LW_LFBK.
    ENDDO.
    CALL METHOD lo_nd_t_lfbk->bind_table
    EXPORTING
    new_items = LT_LFBK.
    If you want to have dynmic table then take a submit button in the form instead of normal button,
    in onaction submit write a loop every time you click that new submit button it should add a new row.
    use above coding in onactionsubmit instead of doinit.
    Thats it.
    Regards,
    Ravi

Maybe you are looking for