Forms6i - problem with jre.exe

I have a problem with installation of Forms6i.
I have processor Celeron 1700 and Windows XP.
I have installed Forms6i, but when I try to run Oracle Net8 Easy Config
there is an error with jre.exe and program close.
I have installed Patch 10 but the error is continually present.
I don't know what I can do.
I know, that it is probably the processor's fault.
It's very important to me.
If somebody knows what to do, please mail me: [email protected]

Forms6i is not yet certified on XP. See Re: required query for this requirement
Regards
Grant Ronald
Forms Product Management

Similar Messages

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Problem with explorer.exe when LR starts

When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
Windows XP Media Center Edition SP2
Pentium 4 3.2 GHz
2 GB RAM

Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/

Problem with PadExe.exe message occurs at the boot-up

On booting up, which takes anything up to 30 minutes and more, I receive a message that there is a problem with PadExe.exe
It seems that padhook.dll is the problem. Putting PadExe or PadExe.exe into the search facility on the Toshiba site reveals no answer.
Does anyone know how I can resolve this problem? The slow boot up I can live with (just don't switch off!)
Thanks for any help.
Ray

This could be an part of the Toshiba Touch and Launch software.
Toshiba Touch and Launch offers easy movement and freedom of programs navigation with TouchPad
I see only one way to solve such error messages. Try to remove this software from the OS and after clean removing and booting you should install it again.

Problem with searchsettings.exe (Mozilla Malware)?

For several days I have had a screen that comes up on boot-up that says basically there is a problem with SearchSettings.exe and it will not start. I did some research and see that it is part of an iObit toolbar system and is basically malware. I found a fix online, but it didn't work so I had to restore. I think my registry cleaner might have remove part of it but I can't find out how to get rid of this annoyance.

Hello,
Here is a guide on how to remove searchsettings.exe:
http://www.spigot.com/remove-search-settings.html
It was part of a toolbar and probably the registry cleaner deleted the uninstall files for the toolbar.

Problems with JRE installation 1.6.0_18 in silent mode

Hi!
I have problems with installing the JRE from the cmd line in silent mode and in a directory with spaces in the path.
If I remove the spaces in the INSTALLDIR, the JRE installs in the directory I have specified but not when I use spaces in the path.
The command I run is following:
jre-6u18-windows-i586.exe /s /v"/qn INSTALLDIR="C:\Program Files (x86)\company\product test\java\""
all I get is the help window to the windows installer with the different options. What am I missing?
BR,
/Peter

Hi
You should install this Patch:
Patch 13948973: JDEV 11.1.1.6.0 FREEZES IN CUSTOMIZATION MODE DUE TO DEADLOCK
After the installation the JDev works fine again.
Regards, David Perez

Strange problem with JRE

Greetings,
I'm seeing a problem with a JRE on one machine that is behaving strangely. The problem is that it is slow. I was wondering if anybody's great troubleshooting mind would have anything to throw at this problem.
There are two machines that run a Java app. Each machine is a few years old. They have dual core Athlons. One runs the app quickly, and one runs the app slowly. Both have very similar hardware (including motherboards and network cards). Both have Windows XP Pro (32-bit), fully patched. The machines each have two IP addresses, two subnet masks, and two gateways. They have a persistent static route to the server that the Java app is talking to.
The machine that runs the app quickly has 1 GB of RAM, and older device drivers. The machine that runs it slowly has 2 GB of RAM.
The Java app runs on both on JRE 1.5.0.12 because the developer does not support a later version.
The slow machine runs every application very fast, except for the Java app. The slowness on the one machine is particularly noticeable while the app talks over a network. Both are on the same network and are talking to the same server. A traceroute to the server on the slow machine indicates that every time (in ms) is the same except for one hop, in which it is double.
Unfortunately, the application needs to be running fast. The delay on the slow machine is unacceptable for what it is doing.
We have looked at the network traffic it appears that the slow machine is taking a lot longer to start talking to the network. That is where it is slow. The faster machine starts talking immediately, gets a reply immediately, and is done.
While the slow machine is taking a long time to start talking on the network, javaw.exe is taking up about 50% of the CPU time (according to Task Manager). This goes on for 30 to 60 seconds. This long, extended CPU time does not happen on the fast machine.
The JRE has already been reinstalled on the slow machine.
The slow machine has been scanned for malware, including with Combofix and Malwarebytes. It has had version 11 of Symantec Endpoint Protection running on it, fully updated. I don't think there is any malware installed.
Any ideas? I am pulling my hair out on this one. I suppose we could just reinstall Windows and start over. Any ideas that would be better?
Thanks.

Cross posting
http://forum.java.sun.com/thread.jspa?messageID=9870469
Cross posting is rude.
db

Problem with JRE and Yahoo applets

Hi, I couldn't find any answer for this anywhere else...
Whenever I try to play a Yahoo game, certain windows will "shake". For example, if I log into yahoo, then go to play their spades game, the applet will load without any problem. The game room will appear and everything seems to be fine. But if I click on the Start Panel, the borders of the Start menu will "shake" If I right click on anything, that menu will also shake. This only occurs while JRE is running the yahoo applet. Once I leave the yahoo game, everything returns to normal. If I use IE and MSVM, this problem does not occur. This problem does not seem to occur with other instances of Java either. Only Yahoo games. I tried searching Yahoo for an answer to this, but didn't find anything. When I tried getting help from them, they replied with an email to update Java and/or my browsers. Well, I am using version 1.4.2_04 of java, and have IE6 updated as of today. Also, I am using Opera version 7.54 and Firefox 0.93. This problem with Java and Yahoo occurs no matter which browser I am using. The only way to keep this from happening seems to be to use IE with MSVM. Any ideas?

That page does apply. Everything that you have written indicates conclusively that the Yahoo game you're playing is the source of the problem. The fact that it works with the MS jvm but not with the Sun jvm, that the Sun jvm works with other Java applets, etc all say the same thing - that Yahoo applets wer/are coded to work with the MS jvm, which uses MS extensions in violation of the Sun/MS licensing agreements. The statement at the bottom of the page is proof positive - your spades game is not listed by Yahoo as being fixed.
"07/17/03 - From Yahoo! Customer Care:
We have deployed a fix for the incompatibilities with the Sun JVM� in the following games:
Chess Gin Cribbage Euchre Bridge
Hearts Toki Toki Boom Graffiti Pool
We plan to upgrade the rest of the games on an ongoing basis. "
The Yahoo applet is the problem and requires repair...

Having problem with svchost.exe/ntdll.dll errors causing GPSVC (Group Policy Client) to crash preventing users from logging into the server.

Recently (within the past 2 weeks) I have noticed a few of our servers will have problems with the svchost.exe application causing the GPSVC (Group Policy Client) to crash. The only fix at that point is to reboot the server since the GPSVC service is tied
to svchost.exe and therefore is protected from being manually restarted.
I noticed the following errors when this occurs:
Log Name: Application
Source: Application Error
Date: 7/23/2013 4:35:26 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Server1.xxx.xxx.net
Description:
Faulting application name: svchost.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x46c
Faulting application start time: 0x01ce877f9476ac07
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: d252d26d-f372-11e2-8ad4-005056ac00e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-07-23T08:35:26.000000000Z" />
<EventRecordID>158950</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW19XM2.agency.nwie.net</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>46c</Data>
<Data>01ce877f9476ac07</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>d252d26d-f372-11e2-8ad4-005056ac00e8</Data>
</EventData>
</Event>
All of our servers are running Server 2008 R2 Enterprise where we use Citrix to deliver desktop sessions to our users, but some are virtual and some are physical. This seemingly impacts our virtual machines more, and our VMs are hosted through VMWare, however,
about 5 months ago a similar error fired on a non-virtual machine:
Log Name: Application
Source: Application Error
Date: 2/27/2013 6:57:58 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: AAW29033
Description:
Faulting application name: svchost.exe_gpsvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000024
Fault offset: 0x00000000000cd7d8
Faulting process id: 0x6c0
Faulting application start time: 0x01ce14e1af313fd9
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: ed3d01c4-80d4-11e2-9128-b499baa9e5e8
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-02-27T11:57:58.000000000Z" />
<EventRecordID>286291</EventRecordID>
<Channel>Application</Channel>
<Computer>AAW29033</Computer>
<Security />
</System>
<EventData>
<Data>svchost.exe_gpsvc</Data>
<Data>6.1.7600.16385</Data>
<Data>4a5bc3c1</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000024</Data>
<Data>00000000000cd7d8</Data>
<Data>6c0</Data>
<Data>01ce14e1af313fd9</Data>
<Data>C:\Windows\system32\svchost.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>ed3d01c4-80d4-11e2-9128-b499baa9e5e8</Data>
</EventData>
</Event>
I've searched and cannot seem to find any information as to what may be causing this, or even really where to start. Would someone be able to help me identify what might be causing this event, specific with the Exception code: 0xc0000024, which causes
the Group Policy Client service to stop?

You still out there looking at things? If so I have an update. The issue hasn't stopped, even though it did seemingly die down for awhile, however, it is now back with a vengeance.
I am able to force it to happen by killing the svchost process that is hosting GPSVC. If I run gpupdate /force, then logout/login it does get GPSVC running again. Furthermore, if I simply start svchost again via the Task Manager GPSVC starts running again.
When I access the server remotely with KVM it acts just like it does as if I'm logging into it via Citrix/RDP which for Admin IDs gives an error saying "Failed to connect to a windows service. Windows could not connect to the Group Policy Client service...",
however, normal user accounts just get a message when logging into the server "The Group Policy Client Service Failed the Logon. Access is denied."
I haven't opened a case with Microsoft yet, but we about ready to because of the increase in these errors.
If you have any further suggestions that would be great, otherwise I'll provide an update once I get word back from Microsoft.
**EDIT -- apparently I mistook the the server's SCM's actions as my own. I was able to successfully crash the GPSVC service by killing the hosting svchost process, however, after I crashed it and let it sit crashed for awhile when I attempted
to restart either by starting a svchost task, or running gpupdate /force it failed. Either that, or there is a timing issue where if we don't restart the svchost process, or run gpupdate /force quickly enough it won't be able to recover without a reboot.

CS4 Problem with Acrobatinfo.exe

I'm having a really obnoxious problem with CS4 (as far as I can tell, every part of it, tested with InDesign, Acrobat, Illustrator and Photoshop).
Every time I open an Adobe application and every 30 second to 3 minutes thereafter, my system hangs for a few seconds, with stuttering screen updates and then the whole screen flickers with a greenish tinge and then goes back to normal.
I've managed to track down the problem to the process Acrobatinfo.exe. Once I started watching the tack manager, I noticed that, without fail, each hang and flicker was preceeded by about 15 seconds of Acrobatinfo.exe starting, sitting around and then peaking at 50% CPU (all of one core/processor I imagine). Shortly after that, the process closes and everything is good again for another few minutes.
System is Windows XP, SP3. 2GB of RAM (and this happens even if nothign else is running). All windows and video card drivers are completely up to date.
Is anyone else having this problem? Any ideas on how to solve it?
Thanks
Tom

After over 10 hours of pain, I've finally solved this problem. It was the Adobe Improvement Program.
I discovered this after noticing that none of the other accounts on this computer had the problem I was having, so after hours of painfully rebuilding my profile from scratch and testing as I went, Acrobat asked if I'd like to join the program.
The second I signed up the same flickering and hangs started up again, and as soon as I said "no !@#$@#!$ thank you" it fixed the problem.
Apparently declining to join the program just on Acrobat set a global setting, as none of the other CS4 apps exhibited any slowdowns after that.
I am livid at the time I wasted tracking down this ridiculous bug, and hopefully this provides some help to others who experience similar problems.

Install Oracle 9 - Problem with jre

Hi,
I have problems with the Oracle Installer in Suse 8.0. The installer hangs when it launchs
the configurations tools setup ( near of end of installation ).
The line is below. It looks like that the installer is trying to use another
JRE version ( 1.1.8 ) of than required ( 1.3 ). When I run the line below with the version
1.3 ( out of installer ) I DONT get the SEGMENTATION FAULT.
Thank you,
Faria
Launched configuration tool Oracle Net Configuration Assistant
Command which is being spawned is /opt/oracle/OraHome/JRE/bin/jre -native
-Duser.dir=/opt/oracle/OraHome/network/jlib -classpath /opt/oracle/OraHome/JRE/lib/i18n.jar:/opt/oracle/OraHome/JRE/lib/rt.jar:/opt/oracle/OraHome/jlib/ewt3.jar:/opt/oracle/OraHome/jlib/ewtcompat-3_3_15.jar:/opt/oracle/OraHome/jlib/netcfg.jar:/opt/oracle/OraHome/network/jlib/netcam.jar:/opt/oracle/OraHome/network/jlib/netca.jar:/opt/oracle/OraHome/jlib/help3.jar:/opt/oracle/OraHome/jlib/oracle_ice5.jar:/opt/oracle/OraHome/jlib/share.jar:/opt/oracle/OraHome/jlib/swingall-1_1_1.jar:/opt/oracle/OraHome/jlib/srvm.jar:/opt/oracle/OraHome/network/tools oracle.net.ca.NetCA /orahome /opt/oracle/OraHome /instype typical
/inscomp client,oraclenet,javavm,server /insprtcl tcp,tcps /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/OraHome/network/install/netca_typ.rsp

If you are using Slackware, install glocale package, otherwise, search which package has LC_MESSAGE files and install it.
Now... run runInstaller again... and voila....
I took 1 day to find it out!
Good luck!

Execution problem with java.exe

Hi everybody. I am a student in a belgian university, and i've got a problem with the execution of my binaries in the JVM.
I'm developping my project with Eclipse. When I build the project, Eclipse launch perfectly my application with javaw.exe (I supposed it because it's written in the console when I run the project).
Thus, I wanted to try to launch my application by myself, to check if everything is right...
My project is composed like this :
- creavea/src : the sources of my project (a package called "main" , and a package "com.creavea. ..." and other .jar files like a MySQLConnector/J, edtFTPj, the JOutlookBar by lf2prod, ...
- creavea/bin : Eclipse puts the binaries there, when I run my project.
- creavea/files : Somes files like configuration files for my application, etc ...
- creavea/images : Images for my interface.
- the main class, containing the pubilc static void main method, is called CreaGesta, and is in the "main" package.
creavea is the name of my project, but i think you supposed it !
I want to run the binaries, then i do this :
- I open a ms-dos console
- I'm going in the C:\eclipse\workspace\creavea\bin folder
- I execute the command : java main.CreaGesta ...
And it doesn't work :'( ! An error appears :
Exception in thread "main" java.lang.NoClassDefFoundError : com/lf2prod/common/swing/JOutlookBar.
This class, JOutlookBar is used by my application, and the jar file containing the class is in my /bin folder. I can't understand, i'm a little bit disapointed.
It's my first big project in Java, then i don't really understand what's happening. So if someone can help me, it will be really nice for me ! Thanks a lot for your help !
J�r�me - Belgium

Thank you for your reply Atmguy ! I put in my command the classpath of the jar's who are in my /bin folder.
Like this : java -classpath edtftpj-1.4.9.jar; jdom.jar;l2fprod-common-outlookbar.jar;mysql-connector-java-3.1.8-bin.jar main.CreaGesta But now, i've got an other error message :
Exception in thread "main" java.lang.NoClassDefFoundError : main/CreaGestaOh, it changed ! but I don't understand the problem . What does it mean? "Java cannot find the class main/CreaGesta", or "An error occured in main.CreaGesta" ?
Can somebody help me to solve this new error ? Thank you !

IE 7 problem with jre version 1.4.1

We are experiencing a problem with a site that is running java applets. It requires version 1.4.1. After logging into this site, a second window should appear. There are several times when that second window will attempt to open but then closes immediately. The only fix that I have found is to open the Java Console (tools>Sun Java Console) with the browser open and then immediately close the console.
Is there another workaround or fix?
Thanks

Starting in JRE 5.0u7 and 6, we have family clsid support for the 1.4.2 and 5.0 JRE family. Please refer to Deploying Java Applets With Family JRE Versions in Java Plug-In for Internet Explorer for details. In your HTML page you can specify the 1.4.2 family clsid so that the latest installed JRE 1.4.2 version on the machine will be used. Note that we no longer support JRE 1.4.1. Please migrate your applet to JRE 1.4.2 or newer JRE versions.
http://java.sun.com/developer/community/askxprt/2007/jl0212.html
=> upgrade to the latest jre

Problem with my exe code

Hello,
I have a small problem regarding to my code. I have attached the source code. There isn't any problem with the vi code. But when I convert the vi to exe, and double click the exe file in order to open it , the program is trying to start, I mean it is acting like I clicked the run button. I said it is not a problem, because all the values (test duration, delay duration, high limit, low limit) are zero. Therefore it is attempting to run, but only very small portion of the pressure reading occurs. What do you think about the cause of this problem? Thanks for your help.
Ahmet
Attachments:
front panel1.jpg ‏47 KB
Oksijen_Atolyesi.vi ‏45 KB

Hi Ahmet,
when duration and delay are zero, the your DAQ loop will (probably) run only once, thus giving you only small amount of data...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
Oksijen_Atolyesi.vi ‏35 KB

Problem with BRIGHT.EXE in QOSMIO G40

Hello and good morning,
I'm a new user here at the forum, and i hope i'm posting in the right place :).
I just bought, well in march a Qosmio G40, and i'm very pleased with it, but 3 days ago I noticed a problem with it, the program BRIGHT.EXE, which controls the brightness of the flatscreen is not working (well, it stoped working), when i press the button in the operacional front panel, or use the combination FN+F6 or F7, it doesn't work, windows says that the program BRIGHT.EXE gave an error but doesn't specify which error.
Does anyone have any idea of why it is happening and a way to solve it ?
Best,
Ricardo

Thank you guys for your answers.
I'll try first to install the Value Added Package first. Do I have to uninstall the version i have first? or can i start the instalation and it will uninstall automatically ?
And then if the re-installation won't work, i'll try to rollback my OS.
Ricardo Monteiro
BTW: as i have Vista in Portuguese (:( ) i still don't have SP1 ehehe
Message was edited by: ricardo_monteiro

Forms6i - problem with jre.exe

Similar Messages

Maybe you are looking for