FormsCentral could not import the PDF document because there was an error parsing the document.

i/m receiving this message, but i do not understand what to do, or what means. Can anybody help me, please?

Hi;
Would you mind sharing your PDF with me at [email protected] and we'll take a look at it.
Thanks,
Josh

Similar Messages

  • Anytime I try to download pages to my MacBook Pro a window comes up that says we could not complete your request and that there was an error in the app store. someone please help

    anyime that i try to download pages on my macbook pro from the app store a window comes up that says we could not complete your request and that there was an error in the app store. someone please help

    Error
    what is error code 1009?

  • FormsCentral could not import the PDF document because it does not contain interactive form fields. You need to add fields to your PDF using Adobe Acrobat and import again

    HALP! What do I have to do to fix this issue??

    Hi blythegemini,
    Please see this document: How do I make my PDF form fillable so I can import it into FormsCentral?
    Adobe FormsCentral can't import "flat form" (one that isn't fillable) and convert it to a fillable form. You would need to use Acrobat to add fillable fields to the PDF. If you don't have Acrobat, please feel free to give it a try. You can download a free 30-day trial from http://www.adobe.com/products/acrobat.html.
    Best,
    Sara

  • FormsCentral could not import the PDF document because it has already been distributed by FormsCentr

    Why this error?

    Also, when I go to https://www.acrobat.com/formscentral/en/landing/axifcpricing.html?accntlvl=fr&promoid=KEUQ Z&s_tnt=58495:1:0
    I get this info:
                   Distribute forms to others
    Save new PDF forms
                   Unlimited
                   Unlimited
                   Unlimited
    Link to web forms
                   1 form max †
                   5 form max †
                   Unlimited
    Get HTML embed code
                   1 form max †
                   5 form max †
                   Unlimited
    Work with existing PDF forms
                   1 form max †
                   5 form max †
                   Unlimited
    So is this saying that even if I upgrade to the middle selection here I can only work with up to 5 forms?
    ~   Andy

  • The Manifest Designer could not import the certificate

    What I'm trying to accomplish here is to have the .appx file signed during build time so that the following command would work or even better I should not need it anymore
    set path=%path%;"C:\Program Files (x86)\Windows Kits\8.1\bin\x64"
    SignTool.exe sign /a /f certificate.pfx /fd SHA256 /v /p MySecretPassword TestApp.appx
    I opened package.windows.appmanifest file (located in TestApp_root\TestApp\bld\Release\platforms\windows directory) in the editor view, chose Packaging tab and clicked Choose certificate... From there I chose Select from File... from the Configure Certificate
    drop down menu and selected the .pfx we purchased from Symantec few weeks ago. After that I typed in password and password confirmation as requested.
    I ended up getting an error message "The Manifest Designer could not import the certificate", The certificate you selected is not valid for signing because it's either expired or has another issue.
    I checked that the certificate is listed in certmgr.msc Trusted Root Certificate Authorities > Certificates view and it's issued to our Company name.
    In the Manifest Designer Publisher display name matches our Company name, but Publisher is set to CN=$username$
    I tried to change that to CN=Company Name, OU=Company Name that was mentioned in the certificate, but still no luck.
    Certificate also matches the listed requirements: http://stackoverflow.com/questions/22288410/choosing-a-certificate-for-a-windows-store-application-via-the-package-appxmanif
    How to proceed from here?

    Hi terodev,
    I found a similar discussion on the forum:
    https://social.msdn.microsoft.com/forums/windowsapps/en-us/d858d189-6d14-4c8d-809d-d6c841dd8866/using-domain-certificate-for-app-signing
    Could you take a look and give a try to see if it helps?
    --James
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error."  Please help.

    Photoshop Elements 8.  "Could not use Clone Stamp Tool because of a program error."  Please help.

    Try this:
    Open your picture file
    Access the clone stamp tool
    Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
    TIPS:
    It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
    Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
    Let us know  how you make out with the error message now.

  • I have been trying to download ios8. I dont remember exactly what happened but at some point I ended up unplugging my phone from my computer because there was an error. Every since then it has not been turning on or responding to iTunes.    When it d

    I have been trying to download ios8. I dont remember exactly what happened but at some point I ended up unplugging my phone from my computer because there was an error. Every since then it has not been turning on or responding to iTunes.
    When it does respond to iTunes it tells me that I have to restore my phone. I click restore and it says "Extracting Software". It gets all the way to the end and then says that there is an error; something about a disk being full?
    I have no idea what is going on and I could really use some help.
    Thanks.

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • I can't eject my cd from the drive because there was an error! What do I do?

    I'm not sure what to do because I can't eject my cd from my cd drive because there was an error on the cd after I tried to put pictures on it. I tried to burn 37 pictures to a 700MB CD-R80, and it seemed to work and then at the end it said there was an error and it spit the cd out... so I probably shouldn't have done this, but I put the cd back in my macbookpro and tried to use it again because I wasn't sure what happened... Well it obviously didn't work! I tried to shut down my computer and restart it, but that didn't do anything and the cd didn't even show up on my desktop, and I couldn't find it in Finder or in my system preferences or anywhere.
    Any suggestions before I take it in to the Apple store to have them take a look at it?

    Restart again but this time hold down the mouse button 'til it ejects.

  • I have iMac and lion OS. When I try to download (free or not) any program it always  message "There was an error in the App Store. Please try again later. (13)

    I have iMac and lion OS. When I try to download (free or not) any program it always  message "There was an error in the App Store. Please try again later. (13)

    http://www.apple.com/support/mac/app-store/contact.html?form=account

  • SSRS PDF Export. There was an error opening this document. This file is damaged and could not be repaired

    Hello,
    I just experienced this problem, and was able to successfully mitigate.  I wanted to share my experience and Solution. 
    The problem started with the following error after succesfully exporting a PDF Document.  "There was an error opening this document. This file is damaged and could not be repaired."
    This is only applicable if you can still export and open SSRS Reports to other formats. Go to the Log files of the SQL Instance. In my particular case I used the Default MSSQL instance:   C:\ Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting
    Services\LogFiles  
    The Folder will begin with MSRS (SRS is for SQL Reporting Services)
    Sort the files by date modified and check for the most recent log file: ex.  SQLDmpr0000.log  The 0000 will be the incremental amount of errors you have experienced in SRS. Check for the following error:
    "System.DllNotFoundException: Unable to load DLL 'T2Embed': Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))"
    Below is a sample from the log. 
    reportrendering!ReportServer_0-1!1b78!02/07/2012-11:56:03:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException: , Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException:
    An error occurred during rendering of the report. ---> Microsoft.ReportingServices.OnDemandReportRendering.ReportRenderingException: An error occurred during rendering of the report. ---> System.DllNotFoundException: Unable to load DLL 'T2Embed': Access
    is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
       at Microsoft.ReportingServices.Rendering.ImageRenderer.FontPackage.TTGetEmbeddingType(Win32DCSafeHandle hdc, UInt32& status)
       at Microsoft.ReportingServices.Rendering.ImageRenderer.FontPackage.CheckEmbeddingRights(Win32DCSafeHandle hdc)
       at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFWriter.ProcessFontForFontEmbedding(PDFFont pdfFont, Dictionary`2 embeddedFonts)
       at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFWriter.EndReport()
       at Microsoft.ReportingServices.Rendering.ImageRenderer.PDFRenderer.Render(Report report, NameValueCollection deviceInfo, Hashtable renderProperties, CreateAndRegisterStream
    createAndRegisterStream)
       at Microsoft.ReportingServices.Rendering.ImageRenderer.RendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo,
    NameValueCollection clientCapabilities, Hashtable& renderProperties, CreateAndRegisterStream createAndRegisterStream)
       --- End of inner exception stack trace ---
       at Microsoft.ReportingServices.Rendering.ImageRenderer.RendererBase.Render(Report report, NameValueCollection reportServerParameters, NameValueCollection deviceInfo,
    NameValueCollection clientCapabilities, Hashtable& renderProperties, CreateAndRegisterStream createAndRegisterStream)
       at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderFromOdpSnapshot(IRenderingExtension newRenderer, String streamName, ProcessingContext
    pc, RenderingContext rc)
       --- End of inner exception stack trace ---;
    If you notice the error states that T2Embed.dll access is denied. In my case this due to a hotfix installed by Microsoft: 
     MS11-087: Vulnerability in Windows kernel-mode drivers could allow remote code execution: December 13, 2011
    Be advised, in order to fix your problem and render pdf's, a vulnerability shall be created.
     To fix this issue and allow the export to PDF work correctly, you must give the system Read/Execute Permissions, and Built-in\Administrators Full Control. 
    Go to Windows\System32 and find the T2Embed.dll Go to Security and modify the permissions as listed above. Do the same to the T2Embed.dll in the SysWow64 folder.
    Restart Reporting Services and you will be able to export to PDF. 
    Best Wishes! 
    Mariano
    www.lucontech.com 

    I'm not convinced this is the exact cause of the issue.  I will check my log files to see if I find anything like what you described.  However, I get this error when a particular user tries to do a "print preview" from a custom button.  The
    code builds a ReportViewer object, sets the ReportPath, etc.
    The reason I'm not convinced is because we have a separate reports page that has the report viewer embedded into it.  If the user generates the report that way and exports to PDF, Word, etc...the user can generate the file and be on their way.  As
    soon as the user clicks our "Print" button on the page without the ReportViewer embedded, the above mentioned error occurs.  
    UPDATE: Perhaps we have a different problem since my issue is from a custom button.  I found the solution
    here and confirmed the solution with the customer.  It had to do with the code using Response.Flush() instead of Response.End().
    One thing I noticed before I implemented the change: When you would close the PDF, it would ask you to save changes to the PDF.  After implementing Response.End() instead, that prompt went away.  No doubt it has to do with the differences between
    how Response.Flush() and Response.End() handle the stream returned.
    Anyway, posting in case someone has the same issue.

  • ITunes could not connect to this iPhone because of an unknown error occurred (0xE800007F)

    iTunes to iPhone 4 wireless sync fails.  iTunes gives me this message:
    iTunes could not connect to this iPhone because of anunknown error occurred (0xE800007F)
    Windows 7 Pro - (Lastest & Greatest)
    iPhone 4 - ios 5.0.1 (Lastest & Greatest)
    iTunes 10.5.1.42 (Lastest & Greatest)
    A Google search has found a number of other iPhone owners having the same problem, but no resolution.  Anyone have a fix for this issue?

    Hi Annette, i think itunes keeps booting itself because either your ipad or iphone or ipod touch has 'Open iTunes when this ##### is connected' selected in its properties.
    to fix, connect whichever device you have to itunes using a cable, select the device in the left colmn and under the 'Summary' tab, deselect 'Open iTunes when this #### is connected'
    This was doing the same thing to me. drove me mad.
    I too am also having the same issue as the original poster with the cant connect message.
    regards
    Louis

  • Could not import the licensefile with saplicense.exe in miniwas

    hello !
    I have get the hardwarekey with saplicense u2013get
    With the correct hardwarekey I have get a licensefile from SAP
    If i import the licensefile with saplicense u2013install iflile = mbs.txt
    I get the massage:
    License data read from file mbs.txt
    License not installed
    Wrong license file
    I also tried it manual with saplicense u2013install
    Then i get also the massage License not installed
    What i can do?
    Thank you for helping me !
    For extra information i get with
    Saplicense u2013show
    System BSP
    Hardwarekey. TEMPLICENSE
    Installation no INITIAL
    Userlimit 0
    Productid R3_ADA
    System-nr INITIAL_SYSTEM_IDX
    Edited by: Thomas Grashaeftl on Jul 23, 2008 1:10 PM

    Why is your file called mbs? Are you sure you've got a license for system BSP?
    it'called mbs because i have get the file from the site:
    https://websmp130.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/minisap/minisap.htm
    if have a windows system  so i choose mbs.
    bsp i could not choose !
    BSP is from my first intallation from miniwas from last month, it is my first time
    to update the registration.
    What should i do?

  • Adobe Error Msg -getting a error message when I try to open any of my pdf files. "There was an error opening this document. The file is damaged and could not be repaired."

    How do I resolve this?  I have OS X Lion 10.7.5, iMac from mid 2010.
    Please help, this is super annoying!

    Try opening them with Preview.

  • Itunes could not connect to this iphone because of an unknown error (0xE800007F)

    Never experienced this before, but I've been having this issue constantly since installing iTunes 10.5 and iOS5.  I get this error when my iPhone is on the same network, but not attached via USB.  My iPad communicates and syncs with iTunes just fine.
    When the iPhone is connected via USB, the error doesn't occur.  I'm not even trying to sync with my iPhone when I get this error - iTunes just sees it on the network and gives me this error.  Sometimes I have to close multiple instances of this error - up to 20 instances at times.
    Thoughts?

    Hi Annette, i think itunes keeps booting itself because either your ipad or iphone or ipod touch has 'Open iTunes when this ##### is connected' selected in its properties.
    to fix, connect whichever device you have to itunes using a cable, select the device in the left colmn and under the 'Summary' tab, deselect 'Open iTunes when this #### is connected'
    This was doing the same thing to me. drove me mad.
    I too am also having the same issue as the original poster with the cant connect message.
    regards
    Louis

  • Could not print "whatever file name" because of a disk error ???

    Hello,
    I am running Snow Leopard 10.6.4, and Adobe CS5 suite, whenever I try to print to my printer I get this error from Photoshop, which is rather annoying. I have the scratch disk set to an empty 1tb hdd, and obviously the primary drive works just fine as well. Amazingly I googled it like crazy and nobody has the same issues (on a mac) . Any suggestions?

    I doubt there has ever been a color profile written for a LaserJet 4M+.
    I thought I'd try it again and try to capture any errors in the log files.
    So I went back into Photoshop and changed the print settings to "Printer Manages Colors".
    I am trying to print a tiff file that has the profile "Untagged Gray" assigned to it.
    With that file, I click on Print Settings and nothing happens. The window that should open doesn't. I don't know if that provides a clue.
    Also no errors in the log files.
    Earlier I had a PSD file open and I tried it and it worked with either "Printer Manages Colors" or "Photoshop Manages Colors".
    But I just tried it again and now it doesn't. I've tried quitting and restarting Photoshop and it doesn't seem to make a difference.
    I'll keep trying it and see if I can find a pattern for why it works sometimes and not others.
    Photoshop Manages Colors always works.
    Printer Manages Colors seems very flakey.

Maybe you are looking for