Formula Row/Col Custom Heading not appearing on the Grid Cell in FR Studio

I'm building reports using Financial Reporting Studio Software.
When i insert the formula row/column and give a custon heading, it is not reflecting on the GRID. The cell still shows blank.
What should i do ? is this a bug?

Which version of EPM you have is it 11.1.2 or 11.1.2.1 don't see fR studio > about it will show 11.1.2 if it is 11.1.2.1 then try 11.1.2.1.128 patch.
because there is bug 14617522 - CUSTOM HEADINGS FOR THE ROWS BELOW THE TEMPLATE DISAPPEARS
Infact try with latest 11.1.2.1 patch that is 133.
Edited by: Neeraj Lahoti on Jun 3, 2013 9:45 PM

Similar Messages

  • Artwork does not appear on the grid or coverflow.

    Artwork does not appear on the grid or coverflow for several albums but appears in the artwork viewer when you play a song from the album.  How do I get the artwork to appear?  The artwork seems to be missing for albums that I believe were on a playlist that was selected when the external hard drive storing the music was not connected to the laptop.

    Went to the apple store.  They gave me an easy way to copy existing artwork to the first track as only the first track was apparently missing artwork on the affected albums.  When I got home I found an easier way to restore the artwork simply by selecting "Get Info" for one of the songs on the album.

  • Restricting Sales Order Form header notes appearing on delivery header

    Hi,
    Can someone please advice as to how to we can restrict the sales order form header text appearing on the delivery header?
    Thanks
    Keshi

    Dear Keshi
    In VOTX find out the procedure for your sales order header and Delivery header
    Go to delivery procedure for header you will find Text Id (which you want to remove in delivery header) which is also present in sales order header.
    Remove that text id from the procedure .
    Please check if that procedure is not used for other deliveries, if it is used than define new procedure for your deliveries.
    Regards
    Jitesh

  • SAP Portal custom themes not appearing in 'Personalize' link

    Hi.
    I am trying to make customised themes available to my users through the 'Personalize' link in the masthead. I have successfully customised the Personalize function so it now includes only the ability to choose themes - all other forms of personalisation have been stripped out. I have also successfully created a customised theme.
    My problem is that the custom theme I have created does not appear in the values list within Personalize -> Portal Theme. Only SAP standard themes are appearing in the list. I have managed to assign the theme to users through a display rule, so I know the theme works OK. I have tried exporting and re-importing the theme, this did not help.
    Does anybody know how I can make my custom theme available through the Personalize -> Portal Theme list?
    Thanks in advance for any help,
    Simon.

    Hi,
    Only the themes present in the desktop in which the users fall will be available in the personalize link.
    In detail
    System admin->portal display->Desktop and display rule ->open your desktop (in which the user falls)
    Add all your custom theme to the desktop.
    By now the custom theme will be present in personalize->custom theme.
    Regards
    Karthiheyan M

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Excise Tab is not  appear in the MIGO display  --- Import Process

    Hi Experts ,
    Excise tab is not appear in the display of the material document in Import process.
    Process flow.
    1. Import Po.
    2. Customs clearing (MIRO)
    3. Capture excise invoice against the Import Po.(Reference to MIRO document )
    4.MIGO with movement type 103, in excise tab i selected only refer the excise invoice , here excise ta is coming . Lot is also generated .
    after posting the material document , excise tab is not appearing against  the material document .
    5. post excise against the excise invoice .
    Please help.
    Thanks
    SAP MM
    Edited by: Subbas on Aug 16, 2010 11:58 AM

    Excise captured & posted using J1IEX using 2 step procedure won't appear in MIGO screen.
    Display excise invoice using J1IEX(using vendor excise inv. no. or internal document no)
    Only excise captured & posted in MIGO(Single step) will be appear in display of MIGO screeen.
    Check SAP Note 952287 - CIN: Limited Functionalities in Country Version India -CIN -Q.no.5
    5. Incoming Excise Invoice capture at Blocked stock 103 is not
    supported in CIN.
    The capture of incoming excise invoice is strictly advised to carryout at
    unrestricted stock and not at blocked stock(103/105) due to architectural
    issues. The capture at blocked stock may cause wrong excise posting.

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

  • Alv is not appearing in the same Selection Screen

    Hi people..
    First time using  cl_gui_docking_container.
    I have a problem, my alv is not appearing in the same Selection Screen.
    is there somethign wrong with my code? it doesnt even show a dump or catch.
    Regards
    DATA: lo_dock TYPE REF TO cl_gui_docking_container,
           lo_cont TYPE REF TO cl_gui_container.
    DATA: gr_table      type ref to cl_salv_table,
           gr_functions  type ref to cl_salv_functions,
           gr_display    type ref to cl_salv_display_settings,
           gr_columns    type ref to cl_salv_columns_table,
           gr_column     type ref to cl_salv_column_table,
           gr_sorts      type ref to cl_salv_sorts,
           gr_agg        type ref to cl_salv_aggregations,
           gr_filter     type ref to cl_salv_filters,
           gr_layout     type ref to cl_salv_layout,
           color         type lvc_s_colo,
           key           type salv_s_layout_key.
       SELECT * INTO TABLE tbl_datos_items FROM zsd_micros_bd.
    CHECK lo_dock IS INITIAL.
      CREATE OBJECT lo_dock
           EXPORTING
             repid = sy-cprog
             dynnr = sy-dynnr
             ratio = 70
             side  = cl_gui_docking_container=>dock_at_bottom
             name  = 'DOCK_CONT'.
         IF sy-subrc <> 0.
           MESSAGE 'Error in the Docking control' TYPE 'S'.
         ENDIF.
    TRY.
    lo_cont ?= lo_dock.
    cl_salv_table=>factory(
    exporting r_container      = lo_cont
                 container_name = 'DOCK_CONT'
                 list_display   = if_salv_c_bool_sap=>false
    importing r_salv_table = gr_table
    changing t_table = tbl_datos_items  ).
    CATCH cx_salv_msg .
    ENDTRY.
    gr_functions = gr_table->get_functions( ).
    gr_functions->set_all( abap_true ).
      gr_display = gr_table->get_display_settings( ).
      gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
      gr_display->set_list_header( 'Items de Ventas' ).
      gr_table->display( )

    Hi ,
    First you have to create you own screen ( dynpro )  with a screen number ( 0101 for exemple )  , you need to pu a custom control in it , name the custom control ( lo_cont )
    For the screen created you need to create a module for the PBO , in this module you sould put you code for displaying the liste :
    Module STATUS_0101 output.
    TRY.
    lo_cont ?= lo_dock.
    cl_salv_table=>factory(
    exporting r_container      = lo_cont
                 container_name = 'DOCK_CONT'
                 list_display   = if_salv_c_bool_sap=>false
    importing r_salv_table = gr_table
    changing t_table = tbl_datos_items  ).
    CATCH cx_salv_msg .
    ENDTRY.
    gr_functions = gr_table->get_functions( ).
    gr_functions->set_all( abap_true ).
      gr_display = gr_table->get_display_settings( ).
      gr_display->set_striped_pattern( cl_salv_display_settings=>true ).
      gr_display->set_list_header( 'Items de Ventas' ).
      gr_table->display( ).
    Endmodule.
    and give the screen number when calling  lo_dock 
    CREATE OBJECT lo_dock 
           EXPORTING
             repid = sy-cprog
             dynnr = '0101'.
    tested
    Regards

  • Strategy escalation not appearing in the escalation node of UWQ.

    Hi,
    Module: Advanced Collections
    Customer has done the following test case:
    There are three work items in the collection strategy. First two work items are automatic and completed successfully. Third work item is manual and need to be escalated to manager, if it is not closed within time limit.
    Escalation for third Work Item has been setup. On the expiry of the time limit, system sends a email notification to the manager of the collector but this escalation is not appearing in the escalation node of the collectors work queue.
    Checked the collections implementation guide and found the following:
    "In the Escalation section, enter Yes and a closure time if you want an "automatic"
    notification sent to the collector’s manager if the work item is not completed in the
    specified time period"
    It has not specified whether the escalation appears in the workqueue node of the manager.
    I would like to know whether the escalations should appear in the escalation work queue node or is this an intended functionality.
    Thanks and regards,
    Hareesh

    Hareesh,
    As I see the work items a resource after esclation will only in the escalated node but not in the queue of the manager.
    My requirement was to show the UQW items of the subordinates of a manager in the UWQ apart from his own. I am not sure the R11.10 and above with some patch levels has that functionality out of the box, but I had to change the metadata view defnition to show that info in the UWQ.
    Going back to your question, escalations use task architecture. As the task owner is still the resource who holds the task of completing it, the task is not "assigned" to the manager but just a mail is sent keeping in the different bucket.
    Hence that **May** not show in the manager queue. But if you change the metadata views, you can show all of my subordinates tasks to the manager as well which includes the escalations.
    You can try using the task escalations screen to reassign the owner to be manager thus taking the task out my list and showing it up in my manager's list.
    I have not tested this but you can try this option and use as a process step.
    Thanks
    Nagamohan

  • Channel is not appearing in the container

    Hi,
    i have devloped a channel and also a container.
    The follwoing are the corresponding xml's.
    The proble is the channels that i defined as <SELECTED>
    are not appearing in the container, can any one let me know why??????
    arun
    Channel XML
    <Channel name="NewsLeftNav" provider="NewsLeftNavProvider" advanced="false" merge="fuse" lock="false">
    <Properties>
         <String name="refreshTime" value="60"/>     
    <String name="title" value="Left News Channel"/>
    <String name="description" value="News Information"/>
    </Properties>
    </Channel>
    ProviderXML
    <Provider name="NewsLeftNavProvider" class="com.naportal.NewsLeftNavProvider">
    <Properties>
    <String name="title" value="News Left Nav"/>
    <String name="refreshTime" value="0" advanced="true"/>
    <Boolean name="isEditable" value="false" advanced="true"/>
    <String name="editType" value="edit_subset" advanced="true"/>
    <String name="contentPage" value="naportal/newsdesc.jsp"/>
    </Properties>
    </Provider>
    Custom Provider
    <Provider name="NewsTableContainerProvider" class="com.naportal.NewsTableContainerProvider">
    <Properties>
    <String name="contentPage" value="GMtoptable.jsp"/>
    <Collection name="categories">
         <String value="NewsChannels"/>
    </Collection>
    <Collection name="NewsChannels">
         <String name="NewsLeftNav"/>
    </Collection>
    </Properties>
    </Provider>
    Container
    <Container name="NewsTableContainer" provider="NewsTableContainerProvider">
    <Properties>
    <String name="title" value="Front Table Container Channel"/>
    <String name="contentPage" value="GMtoptable.jsp"/>
    <Collection name="categories">
         <String value="NewsChannels"/>
    </Collection>
    <Collection name="NewsChannels">
         <String name="NewsLeftNav"/>
    </Collection>
    <Collection name="channelsRow" advanced="true">
         <String name="NewsLeftNav" value="3"/>
    </Collection>
    </Properties>
    <Available>
         <Reference value="NewsLeftNav"/>
    </Available>
    <Selected>
         <Reference value="NewsLeftNav"/>
    </Selected>
    <Channels>
    </Channels>
    </Container>

    Have you watched the desktop.debug logfile?
    On my installation, it's in the /var/opt/SUNWam/debug directory.
    It might give you some clues...

  • I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

    Hi,
    I forgot my security questions and I don't have a rescue email setup.
    I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
    I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
    How can I reset the security questions.
    thank you

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'.
         2.  Call Apple Support in your country: Customer Service: Contact Apple support.
         3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • HT1386 I have iTunes (up to date) and an iPhone 4s. When I connect it using the USB cable it does not appear in the top right corner. Other devices do and also the cable is fine as it charges and the PC sees it as a device. I've looked online and have no

    I'm new to this and I think I typed a long heading!
    Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
    I've searched the web but all asume iTunes can see the device.
    Help!?

    Hi David,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • Mail messages in my In Box are not appearing in the list of messages.

    Mail: SOME mail messages in my In Box are not appearing in the list of messages.  Instead, there's a blank line in its place if already read, or just the blue dot if unread.  But when I click on the line, the message's column/header detail appears (and I can open it).
    (Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash.  None of the emails I'm questioning have any reference to his email address in them.)

    Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message.  (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

  • /101,/560 are Not appearing in the RT cluster while running  the live run

    HI Experts,
    Pls help me to update the problem,While running the live payroll run the wagetypes /101,/560 are Not appearing in the RT cluster .
    and all primary wagetypes are missing in the RT log .I have checked the processing class table for each classes but its perfecly placed.Whatever I placed in the IT 8 is not appering in the RT LOG .I have run with Standard and custom schema's also for indian payroll.Any settings has been changed for basic infotype??wht could be the reson.Early respose will be appreciated.
    Regards
    Chandra

    Hi  Chandra,
    To me, your problem seems like a patch updation problem.
    Please contact your basis team.
    Technical wagetypes not coming in the RT table
    Regards,
    Dilek

  • Videos does not appear in the list after syncing

    I have synced my 10 minutes music video to my 3gs and the syncing already completed without any error.
    but then i could not find my video in my 3gs. i already checked the include music videos in music sync. i'm sure the video is in mp4 format.
    before this, it shows no videos, you can download videos from itunes, but after i sync this video, it turn out there's like a list of videos but it does not appear. only an empty list without nothing to select on.
    i even try to find the video using spotlight search and it resulted none in my phone but in itunes it shows the video is in there. i wonder where the video goes.. = ="

    I think my question wasn't clear. I know how to display the attachment header (I use classic layout) but the problem is that the paperclip icon does not appear against the messages that contain attachments. See screenshot below. The attachment column is displayed but is blank. These are my sent items and I know for a fact that most of them have attachments. Can you help?

Maybe you are looking for