Forward the mail to more than one agents in User Decision Step

Hi All,
I am referring blog
http://wiki.sdn.sap.com/wiki/display/XI/User%20Decision%20step%20in%20SAP%20PI%207.1%20-%20Part%20I
But my requirement is to forward the mail to group i.e. more than one agents in User Decision Step
How to do this.
Regards

Hi,
Even my requirement is similar one.
I have to forward the mail to SAP Inbox of a group of user.
Anyone of the Purchase team can process the message .
Please suggest how to make our user decision step so that it is forwarded to multiple users for processing.
Regards
Henery

Similar Messages

Can not forward e-mails to more than one address at a time. Just installed the latest upgrade.

Prior to the recent update I was able to add addresses to an e- mail message for forwarding by touching a letter on the keyboard. Contact list would pop up and I could select a name and I . could continue this 8 or 9 times if desired. Adding an address each time
Currently the updated system will only allow the selection of one name. What happened??
How do I get it back the way it was???

I have the same problem, did you get a resaloution?

Isd there a way to have mail use more than one address per person from the address book?

Have a group in address book and some of the records have more than one email address. Is there a way to have mail use both addresses or do I need to have an individual record for each email I want to send to?

This article seems to describe a way to do what you want.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

I have a new iPhone 6 plus and all is OK. But the mail shows more than 400 'unread' messages whereas there are none in the mailbox or trash or anywhere else I have looked. I can send and receive with no problem. I'm sure I have no unread messages.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Outlook (ex Hotmail) on iPhone refuses to send e-mail to more than one person

Hi,
I have two questions today...
When I try to send an e-mail to more than one person from my @outlook.com address on my iPhone it fails everytime and a message pops up that it could not connect to the server. Sending e-mails to one person at a time works perfectly. I think this is a Microsoft issue as I had to verify that I was "human" before I could send a test e-mail to more than one person while logged into the Outlook website on my PC. I never had problems like this on my old Gmail and Ymail accounts. Any ideas how to fix this?
Alternatively, I can use my @icloud.com e-mail address, but this leads to my second question. Apple states that I cannot use my iCloud e-mail address as my Apple ID. I do however not want to keep two mailboxes. Can any e-mails Apple send me (eg. receipts for purchases, etc) be sent to my iCloud address? I'll can then just keep the other e-mail address just for the Apple ID but do not have to monitor it. It this can be done please advise where I can change this.
Any advice will be greatly appreciated.

Some style rules that Firefox handles well on the screen can cause this problem. Many email sites have a print button which simplifies the message format and removes navigation elements, etc., and Firefox generally handles print-formatted pages better. If your email site doesn't have print-formatted pages or those do not print, a "hack" is to select the text you want to print and then choose the Selection option in the print dialog.
To hide email addresses from recipients, you need to place them in the BCC field. What do you put in the TO field in that case? You can use your own address.

Workflow task Assignment to more than one agent

Hi
Does anyone know about Workflow task Assignment to more than one agent.
This mena at one point there will be more than one approver..
Regards,
Anand

Hi,
Have you checked in OVX6 ? You can assign a given plant to different Sales Org. - Distribution Channel.
Select the Sales Org. - Distbn. Channel, click on Assign & in the pop-up box select the plant.
Regards,
Vivek

External e-mail to more than one organizational object

Is there any way to send an external e-mail in a mail step on the WF, to more than one organizational object, without getting their mails?.
I mean, I have a table with OTYPE and OBJID
(example:
line 1: 'US' 'USERNAME'
line 2: 'O' '123456'
line3: 'S' '56789'
I can send them a work-item or a notification, but can I send them an external e-mail in a mail step?
If not, how can I get their mails with an FM?
Thanks!!!!

Hi,
send an external e-mail in a mail step on the WF, to more than one organizational object
1) Get the Email ids of the Org. Objects and stored it in a Multiline Container element and assign it in the 'Send Mail' step
2) Other wise, you have to create a Method in the BO, in the Method get all the email ids of the Org. Object. Then using the Function Module [SO_NEW_DOCUMENT_ATT_SEND_API1|https://wiki.sdn.sap.com/wiki/x/nYKdAw] to send the email.
Regards,
Surjith
Edited by: surjith kumar on Jun 9, 2009 6:53 PM

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Get the data with more than one of the desired value

Hi,
I need to pull the records with more than one value of 'Other' on the delivery days fields.
The delivery fields are mon,tue,wed,thu,fri and sat that tells the where the item will be delivered. The value can be Home, Work, or Other.
Here is the Sample data:
cust_id: 123
item: newspaper
mon: Home
tue:Work
wed: Other
thu: Home
fri: Other
sat: Other
And here is my query so far.
select
cust_id,
item,
mon,
tue,
wed,
thu,
fri,
sat,
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1
else 0 end) as day_ctr
from customer
Could you please help me with the right formula I need to get this?
Thank you in advance..

First
DESC customer
Second
Can you explain what you are trying with
sum(case when (del_mon = 'O' or del_tue ='O' or del_wed ='O' or del_thu ='O' or del_fri ='O' or del_sat='O') then 1 else 0 end) as day_ctr
Third
Usually it's helpful a example of the result you want...
Perhaps you want this
select DECODE(mon,1,(select distinct mon from customer), 'OTHER') mon,
        DECODE(tue,1,(select distinct tue from customer), 'OTHER') tue,
        DECODE(wed,1,(select distinct wed from customer), 'OTHER') wed,
        DECODE(thu,1,(select distinct thu from customer), 'OTHER') thu,
        DECODE(fri,1,(select distinct fri from customer), 'OTHER') fri,
        DECODE(sat,1,(select distinct sat from customer), 'OTHER') sat from
select
COUNT(DISTINCT mon) mon,
COUNT(DISTINCT tue) tue,
COUNT(DISTINCT wed) wed,
COUNT(DISTINCT thu) thu,
COUNT(DISTINCT fri) fri,
COUNT(DISTINCT sat ) sat
from customer
)

Configure workflow notification mailer for more than one domain

Hi ,
Is it possible to configure workflow notification mailer for two different Domains ?
We are using more than one domain so the notifcations/mails has be to be directed to more than one domain .
please guide me through some docs .
Regards .

Duplicate thread (please post only once)
plz help me...!!!! Workflow Notification Mailer
plz help me...!!!! Workflow Notification Mailer

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

Can't use the iPod on more than one computer!!!!!!!

Ok, This has got me so frustrated! We got an iPod and installed iTunes. We thought we had it figured out - we purchased music from iTunes, played it on the iPod and everything was great. Then plugged the iPod into my other computer to listen to our music and it won't freakin' play! says the computer is "Not Authorized" and suggests that by 'authorizing' the 2nd computer, it will overwrite the songs that are already on the iPod. This is NOT desirable. We've downloaded and installed iTunes onto the 2nd computer and used the same login account that we used on the first computer.
What gives!?!?! I thought this was supposed to be easy, but it's not! I was hoping for a quick and simple "plug it in and start listening to music." This is definately not quick and simple. Albeit, I'm new to this iPod craze, but this shouldn't be so difficult. I've poked around on the website and cannot seem to find an answer to this.
HELP!!!!
Thanks
oh btw, Is anyone else getting annoyed by Apple's rediculous attempt at monopolizing this market by forcing us to use thier own proprietary software?!?!

First of all, any computer that plays purchased content must be authorized. This can be accomplished by opening iTunes, then store>authorize computer. If you wish to use your iPod on more than one computer & not have your iPod content erased, you will have to have your iPod preferences set on "manually manage". See the following link.
http://docs.info.apple.com/article.html?artnum=61675
Also, it's not only Apple that uses proprietary software. How about Zune players, & several others?
Message was edited by: StarDeb55
Message was edited by: StarDeb55

Can't turn up the volume on more than one podcast ITunes 11.1.1

This also happened in Itunes 11.1 but when I am in list view and select all podcasts to set the volume between 95 and 100 percent when I choose Get Info a message comes up, "Your selection contains more than one kind of media. All items must be the same kind of order to view or edit them together." I have maybe 1 or two video podcasts but mostly all of them are audio podcasts. I'd like to be able to turn the sound up on all of them at one time like I used to.

Yes, it just took some time to build the waveforms for the second track. I went and got a snack, and when I came back from the kitchen the waveforms were there. Thanks!

Does BPEL allow partnerlinks where the WSDL has more than one namespace

Hi
I have a WSDL where the schema is in a different namespace than the message types. BPEL Designer throws "Exception: Problem building schema" when accessing the variable in the "Assign" activity. Can someone point out if there is a problem with my WSDL file ?
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="ProvWithXSL"
targetNamespace="http://xmlns.oracle.com/ProvWithXSL"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/ProvWithXSL"
xmlns:tns="http://www.example.org"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema attributeFormDefault="qualified"
               elementFormDefault="qualified"
targetNamespace="http://www.example.org"
xmlns:tns="http://www.example.org">
               xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="EventHdr">
<sequence>
<element name="eventType" type="string"/>
<element name="eventID" type="string"/>
<element name="eventSrc" type="string"/>
<element name="objectDN" type="string"/>
<element name="profileID" type="string"/>
</sequence>
</complexType>
<complexType name="Attribute">
<sequence>
<element name="attrname" type="string"/>
<element name="attrval" type="string" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="EventAttrs">
<sequence>
<element name="attr" type="tns:Attribute" maxOccurs="unbounded"/>
</sequence>
</complexType>
<element name="event">
<complexType>
<sequence>
<element name="hdr" type="tns:EventHdr"/>
<element name="attrs" type="tns:EventAttrs"/>
</sequence>
</complexType>
</element>
<element name="ProvWithXSLProcessRequest">
          <complexType>
               <sequence>
                    <element name="parameters" type="string"/>
               </sequence>
          </complexType>
     </element>
     <element name="ProvWithXSLProcessResponse">
          <complexType>
               <sequence>
                    <element name="result" type="string"/>
               </sequence>
          </complexType>
     </element>
</schema>
</types>
     
     <message name="ProvWithXSLRequestMessage">
          
<part name="payload" element="tns:ProvWithXSLProcessRequest"/>
     </message>
     <message name="ProvWithXSLResponseMessage">
          <part name="payload" element="tns:ProvWithXSLProcessResponse"/>
     </message>
     
     
     <portType name="ProvWithXSL">
          <operation name="initiate">
               <input message="client:ProvWithXSLRequestMessage"/>
          </operation>
     </portType>
     
     <portType name="ProvWithXSLCallback">
          <operation name="onResult">
               <input message="client:ProvWithXSLResponseMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="ProvWithXSL">
          <plnk:role name="ProvWithXSLProvider">
               <plnk:portType name="client:ProvWithXSL"/>
          </plnk:role>
          <plnk:role name="ProvWithXSLRequester">
               <plnk:portType name="client:ProvWithXSLCallback"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>

You can use more than one namespace (done so before), and several ways to do so.
But first, there's one error in your schema definition:
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://www.example.org"
xmlns:tns="http://www.example.org">
xmlns="http://www.w3.org/2001/XMLSchema">
remove the ">" after xmlns:tns. Btw, this will cause the exception to occur as well.
Why not put your elements in a new schema, like below, and leave the original ports & messages intact, as you don't change anything in it from the original generation. Just add this schema above/below the schema for the messages and it will work just fine.
hth,
Mike
So, you will have a wsdl that looks like:
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://www.example.org"
xmlns:tns="http://www.example.org"
xmlns="http://www.w3.org/2001/XMLSchema">
<complexType name="EventHdr">
<sequence>
<element name="eventType" type="string"/>
<element name="eventID" type="string"/>
<element name="eventSrc" type="string"/>
<element name="objectDN" type="string"/>
<element name="profileID" type="string"/>
</sequence>
</complexType>
<complexType name="Attribute">
<sequence>
<element name="attrname" type="string"/>
<element name="attrval" type="string" maxOccurs="unbounded"/>
</sequence>
</complexType>
<complexType name="EventAttrs">
<sequence>
<element name="attr" type="tns:Attribute" maxOccurs="unbounded"/>
</sequence>
</complexType>
<element name="event">
<complexType>
<sequence>
<element name="hdr" type="tns:EventHdr"/>
<element name="attrs" type="tns:EventAttrs"/>
</sequence>
</complexType>
</element>
</schema>
<schema attributeFormDefault="qualified"
elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/ProvWithXSL"
xmlns:tns="http://www.example.org"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="ProvWithXSLProcessRequest">
<complexType>
<sequence>
<element name="parameters" type="string"/>
</sequence>
</complexType>
</element>
<element name="ProvWithXSLProcessResponse">
<complexType>
<sequence>
<element name="result" type="string"/>
</sequence>
</complexType>
</element>
</schema>

Can i have More than One agent??

Hi,,
Can i create more than 1 agent??
For example.
if i have 10 user.i want to create agent1 and agent2 and ask or assign agent1 for first 5 users and the next to agent2.
This is just i'm thinking if it will give the better performance.
I'm totally new to this product and trying to explore the options.
K

Yes you can, but as Cezar has mentioned this does not need to be done for performance reasons. You would need hundreds of scenarios to make agent load balancing worthwhile.
Have a look at my post on http://www.business-intelligence-quotient.com/?p=306 to see how you can install multiple agents on the same server.
Uli
http://www.bi-q.ie

Forward the mail to more than one agents in User Decision Step

Similar Messages

Maybe you are looking for