Forwarding Application Error in ABAP Proxy to CCMS

Hi,
We are using fault messages for inbound ABAP proxy interfaces to capture application errors, and we can see the error in the monitoring of ECC. However, Is there a way, we can forward it to CCMS of ECC (and not XI), because we want to use an external tool linked to CCMS via SOLMAN to get alerted in case of application errors.
Best regards,
Rahul Kumar

Is there a way of getting the above thing done? I have a very similar Issue.
Rahul if you have found out a way of doing the same please let me know by email. [email protected]
Thanks,
Karthik

Similar Messages

Error in ABAP Proxy

Hi ,
I am getting an error in the proxy , it was working fine but today only it is throughing the following error :
<SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
<SAP:P1>CREATE_OBJECT_CLASS_NOT_FOUND</SAP:P1>
<SAP:P2>ZZCL_MIIA_UKEUROPE_TLOG</SAP:P2>
<SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during proxy processing</SAP:Stack>
Please let me know the reason of this .
Thanks in anticipation
Anita

Hi,
I am assuming you have a server proxy (Inbound interface).
Your proxy objects have not been created properly.
To check this, send a message to XI.
Either XI itself will throw an error message, or running SXI_MONITOR in receiving SAP application will show you the error . If you do not see any entry for corresponding interface, then proxy objects have not been created properly.
Regards,
Puloma.

Handling Application Error in Provider Proxy

Hi
My Asynchronous scenario is as following -->
File --> Sndr File Adapter --> PI --> Rec XI Adapter --> Provider Proxy
In this I am using Fault Message Types to handle any application error like u201CEmployee Number does not existu201D or u201CEmployee Number not providedu201D.
Now when this error will happen I will see checked flag in PI --> SXMB_MONI but I can view these errors in R3 --> SXMB_MONI. I would like to send the Mail of these errors to support group when this happened or would like to create file with these error at some location.
Do I need to use BPM in order to achieve this?
Now what is the best approach to do this:
u2022 Should I ask ABAP programmer to generate the mail with these error.
u2022 Can I associate these errors with Alert Management? If yes, then how.
Pls. let me know if you have handled the Application errors in your scenario (Async Inbound Proxy) using some other method .
Regards
Lalit

you can trigger alert from ABAP program using FM "SALRT_CREATE_API" for these errors

Error in ABAP Proxy generation?

hai pals,
my intention is to push the data from XI to SAPBWSEM system throgh an ABAP PROXY.
       but , here i got an error which i already mentioned in the forum, that is " no connection to integration builder(only local data visible) ".
        i went to the integration engine configuration in "SXMB_ADM" transaction in SAPBWSEM server.
        in sxmb_adm transaction ,the system ask for the "specific configuration data-catagory" like TUNNING , MONITOR,RUNTIME,TRACELOG,DEBUG and RFCADAPTER.
         im little bit confused in choosing the "catagory of configuration data".so can u pls help me in this error.
with cheers.
rajesh

Did you create the RFC Destinations LCRSAPRFC and SAPSLDAPI to point your SLD ? If not do that.
Then create RFC Dest INTEGRATION_DIRECTORY_HMI type H. Look at your XI box and make these 3 RFC Dests.
Then use the following thread to fix your IFR_ADDRESS
Values for table SPROXSET
regards
SKM

How to catch CONVT_NO_NUMBER runtime error in ABAP Proxy

Hi all,
In our abap proxy program, sometimes the CONVT_NO_NUMBER will happen and cause the program dump and then stuck the whole queue. I noticed that this error cannot be caught by CX_ROOT exception class. So, how can I catch this runtime error and avoid the dump of our program?
Thanks,
YiNing

Hi,
While Executing the proxy,first give \h TC and then execute the proxy then it will automatically got to debugging mode.
I think ur data is worng,if it is wrong then only u will get this type of errors.
Regards,
Phani

Error with ABAP proxy

Hi all,
I have an ABAP proxy - XI - Webservice scenario, in the XI side we are getting error saying input data not coming in. How to check weather proxy is triggering the actual payload or data?
There has been a change in the WSDL from the Webservices side, they have changed the data type, so we too updated the mapping in XI. So do we need to change anything in the ABAP program which triggers the proxy,
how do I check weather proxy is triggering data or not?
I want to see weather its problem with the ABAP trigger program.
Thanks,
Srinivas

Hi ramakrishna,
Does R/3 side SXMB_MONI give successful chequered flag when the message is processed?
Because for correctly processed message, the data is being updated in the table, but I can't see the chequered flag on the R/3 side.
But for the wrongly processed ones its showing PL_TIMEOUT error and showing red flag on R/3 side, this is what I see on the R/3 side:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline timeout condition satisfied</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error monitoring abap proxy in WorkBench

Hi all...
I have a problem monitoring an abap proxy in RWB. I receive this message when i try to see the details of the message (Message Content and Queue Monitor options in Message Display Tool) in message monitoring in RWB: User PIRWBUSER has no RFC authorization for function group HTTPTREE ., error key: RFC_ERROR_SYSTEM_FAILURE. In the other side, i can see the header of the message in the message data of the same option.
Any idea with this problem?
Thanks...

Hi,
check your RFC destination. Here is more info about this error message.
In general we get this error while trying to access Unicode / Non Unicode system using Non Unicode / Unicode RFC connection...Your RFC destination should have same Character Format of your target system
Please checkc this property in RFC desctination under Special Option tab.
For r/3 system, Menu->Status. Check if its unicode or not and it should have the same format as that is listed in RFC.
The user should have following authorizations:
SAP_XI_APPL_SERV_USER
SAP_XI_IS_SERV_USER
Regards,
Venkat.

SAVE_STYLESHEET RC_6 error in ABAP proxy- CRM

Hi,
I developed a POC with just 2 fields in DT,for sender SOAP adapter and reciver ABAP proxy. It is running successfully.
But when i developed a actual scenarios with big structure it is giving the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">STYLESHEET_GENERATION_FAILURE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Attempt to generate transformation required for rendering/parsing failed (, class , method ) STYLESHEET_GENERATION_FAILURE Attempt to generate transformation required for rendering/parsing failed (SAVE_STYLESHEET RC_6, class ZII_HSBP_IN_MI, method EXECUTE_ASYNCHRONOUS /1SAI/TXS) Attempt to generate transformation required for rendering/parsing failed (SAVE_STYLESHEET RC_6, class ZII_HSBP_IN_MI, method EXECUTE_ASYNCHRONOUS /1SAI/TXS)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The only difference in both cases is, i developed everything in client 120 for POC. For actual scenario i created proxy class in client 110 and Technical system and everyting is pointing to client 120. Is it causing any problem?
Everyting is fine in XI but in CRM SXMB_MONI i can see the above error...
How to solve this issue.
Message was edited by:
ashok sri

i tired again.. i regenerated the proxy ... but still same problem..
i dont think internal framework problem.. because it worked for other scenario ( test scenario). I think i only messed it up some where.. but i dont know how to find out or how to debug the problem..
I have a doubt on package structure in which i am saving the proxy class.
i created a structuer package( level1) for which i assigned SAPPINT and for all other packages( level2- main package,level3-non main package, level4-non main package)i assigend SAI_SXMS, SAI_TOOLS, SAPPINT. I am saving the proxy class in level4 package. I am not able to assing SAI_SXMS,SAI_TOOLS to structure package. Is it causing any problem???????
any help please...
Message was edited by:
ashok sri

Idoc syntx error me21 , abap proxy call transaction

Hi Experts,
I am struck with the below problem, could you please shed some light on the issue, appreciate your help and rewarded.
scenario:
XI sends NEW PO message to abap proxy, in abap proxy we populate bdc_tab
and call ME21 as below
CALL TRANSACTION 'ME21' using bdc_tab mode 'N' update 'S' messages into messtab.
problem:
EKSEKS01 idoc is getting created with syntax error status code :26 in ECC5.0
only 5 sigments are generated in the idocs. the three segments ( E1PISHO, E1PISIO,E1PISSO not generated).
after transaction executed it returns subrc 1001, msgid--> ME, MSGNO --> 218.
Thanks In Advance.
Ranjit.

Hi Atish and Nishant,
Thanks much for the immediate response.
1.Would like to know what is the mandatory data to be passed for PO creation in BDC table.
2. Is there any user exit or where the idoc creation happens during me21 execution.
I have verified the po in we02 , as before mentioned the three sigments are not getting created and i am not sure the reason.
Note: We didnot have any output configured in ECC 5.0 for this idoc to be created.
I am really not able to locate in debug mode FOR ME21, where this ekseks01 idoc getting created and triggered.
Appreciate your help.
Thanks in Advance.
Ranjit.

Safari Beta 3 Application Error when Behind Proxy (tech. details)

Whenever attempting to authenticate behind a proxy, the following message is displayed:
Safari.exe - Application Error
The instruction at "0x6180af81" referenced memory at "0x00000004". The memory could not be "read".
And the following error is logged in the Event Viewer:
Faulting application Safari.exe, version 3.522.11.3, faulting module CFNetwork.dll, version 1.185.6.0, fault address 0x0000af81.
Event Type: Error
Event Source: Application Error
Event Category: (100)
Event ID: 1000
I hope a fix or workaround can be found for this error.
Windows XP Pro and Windows 2003 Pro

Update 2: this can be fixed by logging on as another user (User2) and deleting the profile of the user (User1) for whom Safari won't launch.
When User1 logs on again, a new profile is created; Safari launches and runs properly under the new profile.
At the time I noticed the problem, only User1 had logged on. As a guess, I logged on remotely as User2 - Safari launched and ran properly. That suggested that something about User1's original profile was the cause.

Transaction Update Error using ABAP Proxy

Hi Experts,
I am facing an issue using ABAP Proxy.
File is coming from PI to SAP system and it will update the Transaction IE02 using this inbound ABAP Proxy. If records fails then a mail is going to concerned team.
Issue:
When File has been sent from PI to SAP through ABAP Prxoy, it shows that record has been updated in the Transaction IE02 but when I checked manually the record, it has not updated the same. But when I test the same record through my ABAP Prox, it updates the record and when I checked it, Reocrd hs been updated.
Can anybody help me in this case?
Regards
Sachin

Hi Anup,
Can you please explain me for the same? If I need to put External Commit then how It is working when I running it manually
Regards
Sachin

Handling appln errors in ABAP proxy

Hello All,
How is application related exceptions handled in a ABAP server proxy.
Say I update a customer record from a proxy(asynch). Now the customer data does not exist in R/3.
Regards,
Jai Shankar

Jai,
for this purpose you should define your message interface to include a fault message type using the default data types created in a namespace exchangefault data and exchange log data.
when you create the proxy object for this interface, you will get exceptions defined int he object. You can raise the exception and populate the error details into corresponding strucures for exchange fault data & exchange log data.
praveen

HTTP_RESP_STATUS_CODE_NOT_OK - Error in ABAP proxy

Dear all,
I work in a scenario in which we send data from the R/3 to XI using the ABAP proxies.
But the messages are not received in XI.
The messages are in error in SXMB_MONI of the R/3 system.
The error message we get in SXMB_MONI of the R/3 system is "HTTP_RESP_STATUS_CODE_NOT_OK"
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
Could anyone kindly suggest a solution to rectify this error?
Thanks.
Best Regards,
Thangesh

Hi,
>>401
1) Might cause due to insufficient right of the User ID
2)Try with this Login XIISUSER
3)Tcode SICF -> Default_host -> sap -> xi
( Check right password for the user id )
4) Check the RFC connection User Id..and it's settings.
This Might Help you
HTTP_RESP_STATUS_CODE_NOT_OK - 401 Unauthorized
HTTP_RESP_STATUS_CODE_NOT_OK 404 Error
HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Regards
Agasthuri Doss

Pipeline error for abap proxy to IDoc scenario

hi experts,
i am getting the following system error in moni for my proxy to idoc scenario.
In error it shows :
"Receiver service cannot be converted into an ALE logical system"
but i have checked adapter specific attributes of both receiver
and sender sys and they both have logical systems ( SO this is not the problem)
TRACE
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
pls suggest .
Appropriate points will be awarded

Hi,
Copy the payload from moni and test the mapping.
The error may be due to XML file generated by sender channel is not proper.
and also look at this blog
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Please reward points if it helps
Thanks
Vikranth

Restrict alerts - ABAP application error

Hi,
I need to restrict alerts getting generated for ABAP application error faults. Is there a way to specify exclude these errors in the alert rules or how can i acheive this.
We are having a fault message form ECC, due to application error in ABAP. We do not want an alert raised for this error.
Thanks for the help,
Vinay.

Hello Vinay,
the alert rules defintion is somewhat limited.
You can only specify "include" rules but no "exclude" rules.
It is not possible to specify: "Sent all Alerts, except ECC Application error"
I already have raised this as development request.
The only alternative is to specify a rule for every alert which you do want to receive and leave out the application error (I know, this is not satisfying)
Hope this was helpful.
best regards,
Markus

Forwarding Application Error in ABAP Proxy to CCMS

Similar Messages

Maybe you are looking for