Found cure for Acrobat 9 not able to select Printer in Page setup.

This may already be covered in another thread. In fact I used this as suggestion to cure another problem in another thread. That was related to editing files in Acrobat 9. It cures this problem I brought up on forum a week after I installed acrobat 9.
Every since I purchased by download Acrobat 9, I have been unable to slect a Printer in the Page setup. when clicking any printer your supposed to see a drop down list of all the print Drivers you have installed. I got
nothing.
I downloaded and installed Reader 9.0. Low and behold I am now able to select the desired printer. in Reader 9
and Acrobat 9.
So anyone having these issues. download and install Reader even if you never use it. The installer evidently inserts some code they forgot to put in Acrobat 9.

Well, come to find out. It works on my G4-500 as stated on my OSX.4.11 Drive. But I updated on my Firewire drive and still have same issue with Acrobat. But Reader I am able to set printer.
On my PowerBook 17 G4-1.67Gb Laptop neither works I don't know what to do. adobe is no help.

Similar Messages

  • Not able to select sales area for reference BP in CRM system

    Hi All
    I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
    The field " Choose sale area is subpress/grey.
    Please help me for the same.

    Hi Kishore,
    So you manage get into Sales Area Data, but when you
    try to select Sales Organization you get nothing?
    (click Sales Org combo but no selection appear)?
    How about field Distribution Channel and Division?
    I am afraid some of these fields still not properly
    set/transported to CRM.
    In R/3, this BP has maintained under same Sales Area
    which mapped in CRM Org Model right ?
    What is role in CRM when you open the BP?
    Have you check if there is any error in middleware
    when downloading BP data to CRM?
    Cheers,
    Gun.

  • Not able to select physicalschema directory for file data server in ODI 11g

    Hi,
    I am a beginner to ODI tech and stuck up with an error while doing a tutorial (mentioned in this link - http://st-curriculum.oracle.com/obe/fmw/odi/odi_11g/ODIproject_ff-to-ff/ODIproject_flatfile-to-flatfile.htm).
    While creating a physical schema for default file server(FILE_GENERIC) , I am not able to select schema directories and the name field with value 'FILE_GENERIC.Directory' is grayed out (non editable)
    I have gone through many documents but could not find any relevant information for this.
    So could you please let me know if any configurations required for this?
    Thanks,
    Anusha

    Hi Oleg,
    Thanks for your reply.
    While creation of physical schema , Name field is grayed out , is that the default behaviour of the screen? because in the tutorial I could see the name filead is pointing to a file directory path.
    Thanks,
    Anusha

  • Not able to select images in iphoto 8????

    Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
    Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
    Please help
    Thank you in advance

    THe basic answer is to export them to a desktop folder and access them form there
    for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
    Larry Nebel

  • Acrobat could not perform recognition (OCR) on this page because this page contains renderable text

    I have a pdf file, which was OCRed by some other software, I am not satisfied with its accuracy, and would like to run adobe acrobat to OCR it again.
    But Adobe says "Acrobat could not perform recognition (OCR) on this page because this page contains renderable text" for each page of the file.
    How can I do to re-OCR the file? Thanks!

    CtDave,
    I am having a similar problem and tried your suggestion but I still get the same message. Any other thoughts or fixes? The difference in my file is I used to be able to edit the text in the PDF file. For the last few months I am no longer able to edit this file.

  • I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • Not able to select a row in ALV in Webdynpro

    Hi everyone,
    I have developed a webdynpro application and I have declared component usage for SALV_WD_TABLE.
    The data gets displayed in the ALV, but always the first row is selected.
    When I try to select another row,I am not able to select.
    Could anyone please suggest what might be the problem ?
    Thanks in advance.
    Regards,
    Kumudha.

    Hi Manas,
    Thanks for the inputs.
    I am placing the code below for your reference.
    I try to change the below as Display Text as Code...But it is not happening Plz check
    method wddoinit.
      if wd_this->ls_setup is initial.
        select single * from yyua_c_setup into wd_this->ls_setup
          where system_id = sy-sysid.
      endif.
      "adjustments for ALV
      data lo_cmp_usage type ref to if_wd_component_usage.
      lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
      if lo_cmp_usage->has_active_component( ) is initial.
        lo_cmp_usage->create_component( ).
      endif.
      data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
      l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
      data: l_value type ref to cl_salv_wd_config_table,
            lr_header_t type ref to cl_salv_wd_header,
            lv_text type string.
      l_value = l_ref_interfacecontroller->get_model( ).
      data: lr_column_settings type ref to if_salv_wd_column_settings,
            lr_input_field type ref to cl_salv_wd_uie_input_field,
            lr_column type ref to cl_salv_wd_column.
    Set column title and position
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'CSINSTA' ).
      lr_column->set_position( 1 ).
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/REQUEST_NUMBER' ).
      lr_column->r_header->set_text( 'Installation' ).
      lr_column->r_header->set_ddic_binding_field( '00' ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFUNAME' ).
         |
      lr_column->set_position( 18 ).
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/ACTIVITY_DATE' ).
      lr_column->r_header->set_text( 'Job profile ext' ).
      lr_column->r_header->set_ddic_binding_field( '00' ).
    Hide columns
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFTSTMP' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'AETSTMP' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'STATUS' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'PRIO' ).
      lr_column->set_visible( 0 ).
      lr_column = l_value->if_salv_wd_column_settings~get_column( 'ISSUE' ).
      lr_column->set_visible( 0 ).
      data: lr_functions type ref to if_salv_wd_function_settings,
            lr_function type ref to cl_salv_wd_function,
            lr_button_t type ref to cl_salv_wd_fe_button.
    Add self-defined functions in toolbar
      lr_functions ?= l_value.
      lr_function = lr_functions->create_function( 'SELECT' ).
      create object lr_button_t.
    lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/VIEW' ).
      lr_button_t->set_text( 'Select' ).
      lr_function->set_editor( lr_button_t ).
    data : LR_FUNCTION_SETTINGS TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
    create object LR_FUNCTION_SETTINGS.
    SET row selectable as true
    CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_TABLE_SETTINGS~SET_ROW_SELECTABLE
    EXPORTING
    VALUE = ABAP_TRUE.
    endmethod
    Regards,
    Kumudha.

  • Not able to select a row in ALV?

    Hi Experts,
    I am enhancing a standard e-recruiting WD ABAP component.
    It produces a search result as ALV.
    I am not able to select any row in ALV by clicking it like we normally do in ALV.
    I wrote below code to allow selection:
    lo_value->if_wd_salv_table_settings~set_selection_mode( cl_wd_table=>e_selection_mode-single).
    Even after this I am not able to select any row by clicking it.
    Need help to solve this.
    Regards,
    Sumit Oberoi

    Hi,
    To have the inputfields for the ALV.
    Get the column references of the ALV table and for each column rference create a inputfield object
    type CL_SALV_WD_UIE_INPUT_FIELD.
    lo_value is model object.
      CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
        RECEIVING
          value = wd_this->lit_columns.
    LOOP AT wd_this->lit_columns INTO wd_this->lis_columns.
          lv_id = wd_this->lis_columns-id.
          wd_this->gref_column = wd_this->lis_columns-r_column.
    case lv_id.
    when ' colname'.
                CREATE OBJECT lr_input
                  EXPORTING
                    value_fieldname = lv_id.
                CALL METHOD wd_this->gref_column->set_cell_editor
                  EXPORTING
                    value = lr_input.
    when ' colname'.
                CREATE OBJECT lr_input
                  EXPORTING
                    value_fieldname = lv_id.
                CALL METHOD wd_this->gref_column->set_cell_editor
                  EXPORTING
                    value = lr_input.
    endcase.
    endloop.
    Or you can take a attribute READ_ONLY for the node to which ALV table is bound.
    Set the readonly property to abap_false (for input field) by looping through the table.
    Get the column references and get the textview reference for each column and use the set_read_only
    method by passing the attribute name.
    This way the textview will now become the inputfield when the read_only property is set to abap_false.
    Regards,
    Lekha.

  • Not able to select annotation in Adobe Reader X

    Hi,
    If I hide both toolbar and navigation panel then I am n't able to select annotation in Adobe Reader/Acrobat X.  This wasn't the case with earlier version of Adobe.
    So is this issue of latest Adobe?
    Regards,
    Arvind

    I checked in version 10.0.1 also. I am not able to select annotation with left mouse button click. This happens only when both toolbar and navigation panel are hidden. You can check this at your end.
    And using RMB click, I am able to select annotation.  I think this is an issue of latest Adobe as earlier we were able to select using LMB click even when both toolbar and navigation panel are hidden.
    Regards,
    Arvind

  • Not able to select lineitems in planner monitor,SAP GRC10 PC

    Hello Experts,
    We have created plans and we can able to see created plans in planner monitor under assessment planning in NWBC
    we can able to select the plan name and send to recipient by using Notify button up to this everything is fine
    but when we want to send more than one plans to recipients,not able to select the line items.
    any idea to resolve this.
    Thanks
    GRC Admin

    Hi,
    Even if you can choose multiple lines by pressing ctrl key, Notification is
    allowed for one plan at once. So, it won't allow you to do so.
    Regards,
    Smita.

  • Not able to select value in MSC1N

    Hello All,
    I am trying to create the batch using MSC1N. I am not able to select the characteristics values for few characteristcs. I am using selected sets and code groups for those characterisctis. For others it is working properly. I am getting the error as "Value "Z033000  0010" cannot be selected
    Message no. C1853
    Diagnosis
    From a value hierarchy, you want to choose a value that has subordinate values. This is not possible. You can only choose the lowest values in a value hierarchy.
    Procedure
    Explode the structure down to the lowest values and choose one of these.
    Please guide me asap.
    Regards,
    Mayura

    It sounds like you have multiple values available in the characteristic in your batch class.  I'm guessing that the characteristics you are having problems with are set up differently than the ones you aren't having problems with.
    It sounds like SAP thinks that because you selected code A, you can now pick from Codes X,Y,Z.  But if you had selected code B, you can only pick from Codes L,M,N.  The message is saying you have to pick directly from one of these lower subordinate codes.  You can't select Code A as  your choice because it's not an actual choic, ,only a pathway to let you pick from X,Y,Z.
    I'm not sure exaclty how you have your charateristics set up but his sounds like it has variant configuration involved in it.
    FF

  • Not able to select coloums in BAM View Portal

    Hello All,
    I have configure BAM, created activity and view in BAM.
    I am able to see the view on BAM Portal but not able to select the column from it, please help me on this....
    Thanks,
    Nitin...
    Thanks and Regards, Nitin.

    Hello All,
    Got solution for this...issue turn around that I was opening BAM portal in "Capability View" mode.
    I unchecked this option (Check box) in browser and it's working fine now.
    Tools -> Compatibility View Settings -> This will open new window for "Compatibility View Settings" Window. Uncheck check box for    
    [X] Display intranet sites in Compatibility View.
    And this solved my issue.
    Thanks and Regards, Nitin.

  • Not able to select MS SQL Server tables in sqldeveloper using dblink

    Hi All,
    I able tp select MS SQL table columns in sqlplus prompt but i am not able to select same thing in sql developer using dblink.
    If i use convert(<mycol>,'WE8ISO8859P1','utf8') in sqldeveloper its working, how to select MS SQL columns without convert function.
    Thanks,
    -Mani

    Mani,
    This is a problem with SQL*Developer and converting nvarchar characters.
    The workround is to install the Oracle client software and use the option in SQL*Developer -
    - Tools
    - Preferences
    - Database
    - Advanced
    - and click the 'Use OCI/Thick driver' option.
    I made these steps -
    - download the 11.1 client software from eDelivery -
    http://edelivery.oracle.com/
    - go through the administration screens (name, etc)
    - on the next screen ' Media Pack Search' screen choose -
    - Select a Product Pack - Oracle database
    - Platform - Microsoft Windows (32-bit)
    - Oracle® Database 11g Release 1 (11.1.0.6.0) Media Pack for Microsoft Windows (32-bit)
    - then download -
    Oracle® Database 11g Release 1 Client (11.1.0.6.0) for Microsoft Windows (32-bit) CD
    - Install the Instant Client and also apply the 11.10.7 patchset to the ORACLE_HOME where you install the client. (if you are using 11.1.0.7 RDBMS)
    - for Windows change the PATH system variable to make sure the 11.1 RDBMS and Client ORACLE_HOME directories are listed before any other Oracle directories
    - started SQL*Developer and clicked the 'Use OCI/Thick driver' option
    - could then run the select -
    select "col2" from test_nvarchar@dg4msql ;
    without any problems.
    If this is still a problem for you then let us know the description of the columns in the SQL*Server table that give the problem and the exact errors you receive.
    Regards,
    Mike

  • Logic Pro 9 - Not able to select plugins via Inserts / Audio Units.

    Hi
    I have the program Logic Pro 9 version 9.1.6 (1700.43) (32- bit)
    I use plugins like for example SampleTank and Realstrat . Everything has until recently worked fine, but I now have a problem.
    When I choose a plugin I usually put the mouse on the box 'Inserts', press ALT and then a menu appears. Here I, among many menu items, at the bottom see ' Audio Units ' . At this point I usually could choose, for example SampleTank , .. but now I can only choose Apple features. That is to say - I can not choose my plugins in this menu anymore.
    I've been around online and search . Here I was recommended to delete a file called com.apple.audiounits.cache . I have done this, but the problem is not solved.
    I also have updated the operating system with latest MacOSX10.7.5 update . This has not helped .
    All my plugins are also visible in Logic Audio Units Manager, and I can see that they are being loaded when Logic starts up.
    The plugins also still works in projects created within the problem occurred. That is, - I can open for example SampleTank in a track in a project that is created and a half years ago.
    So the exact problem is that I, in new projects, is not able to select plugins via Inserts / Audio Units .
    Can you help me solve this problem?
    Regards Henrik

    Hekke44 wrote:
    I do not think it is very user friendly, I must say.
    For users of this system, it must surely be obvious that you very often have to choose musical instruments, also from instrument plug-ins.
    Yes, often. That is why it is very obvious and simple for any experienced user.
    Hekke44 wrote:
    Why on earth is it so complicated to choose a musical instrument? If you are not currently using this system every day, you forget the such a detail about having to press down for several seconds to select an instrument.
    I do not think it is complicated at all. And you do not have to press down for several seconds. I just timed, it is 0.4 seconds of clickholding. The holding is functional:  you won't load a new instrument (and possiblly loose any work you had done on your sound) just because you accidentally clicked on a slot.
    Hekke44 wrote:
    There should be a nice big green button on the screen that read 'Select musical instrument', - then a menu where you can choose whether it should be one of Logics musical instruments, or a plugin instrument.
    It would be user-friendly.
    What is your view about these things?
    You are basically saying it should be dumbed down to the level of some "any-kid-or-adult-idiot-can-use-it-out-of-the-box" smartphone app. I think you are overlooking that this is a Pro program, not a toy. I think you try to blame the software for the fact that you didn't know how to operate it. You're avoiding responsability. That's my view.

  • Not able to get the login page after installing 12.1.1

    HI,
    i am not able to get the login page after installing in the 12.1.1. when i accessed from client machineo.Please help me in fixing out this problem.
    Thanks,
    venkat.

    Hi,
    What is the OS?
    What is the error message?
    Any errors in Apache/Database log files?
    Thanks,
    Hussein

Maybe you are looking for

  • MBP 15" 10.6 does not boot up from Installation disc, why??????

    Good day, my question is simple, so please let the answer be simple: I have done partition on my MBP today, in order to give me more redundancy in case of a Hard drive failure. I witnessed one yesterday on a brand spanking Imac--> not pretty--> the w

  • VLookup in two Excel Spreadsheets in a site Library

    Hi All, I have searched the net regarding my problem and cannot seem to find a direct answer.  I have multiple excel files contained in a SharePoint 2013 site library.  I open one of them, which have a vlookup to the other spreadsheet.  To first ment

  • BI Documents and Commentary

    Hi, We are currently in the process of upgrading BW3.5 to BI7. We were looking into using Knowledge Management as our document store and were wondering what additional functionality KM could bring as a document store. I am aware that KM provides the

  • Adding e-mails to Adobe Portfolio using the Outlook Plug-in

    I support a user here who is asking if it is possible to add additional emails to an Adobe portfolio using the Outlook Plug-in.  The user initially creates a portfolio of emails using the plug in, but would then like to add further emails to the port

  • Posting Subcontracting PO with BAPI_GOODSMVT_CREATE

    Hi Guru's, I'm using the BAPI "BAPI_GOODSMVT_CREATE" to do the GR using Purchase Order. For Sub Contracting PO also we are using the same BAPI and we are doing it successfully, but my requirement is when we do the posting for subcontracting, the SAP