Found error in OWB

I have a problem with OWB.
I run 1000 records and i get error "numeric or value error "
I want to know in wich records i get this error
How can i do this ?
Thanks

This is what I did the last time I encountered this...
1) Query the table owb_rt_errors that is owned by the repository owner. Pay particular attention to the column rte_dest_column. This should tell you which column is not fitting. I had the error "character string buffer too small" in the column rte_sqlerrm.
2) select max(length(whatever_was_in_rte_dest_column)) from your_source_table;
3) select * from your_source_table where length(whatever_was_in_rt_dest_column) = what_was_returned_in_step_2;
That should tell you the row where you're having problems. Otherwise, if you are having slightly different problem than "character buffer too small" - you may be able to use this type of logic to specifically identify your problem.
Good luck,
Tim

Similar Messages

I am getting ORA-01403: no data found error while calling a stored procedur

Hi, I have a stored procedure. When I execute it from Toad it is successfull.
But when I call that from my java function it gives me ORA-01403: no data found error -
My code is like this -
SELECT COUNT(*) INTO L_N_CNT FROM TLSI_SI_MAST WHERE UPPER(CUST_CD) =UPPER(R_V_CUST_CD) AND
UPPER(ACCT_CD)=UPPER(R_V_ACCT_CD) AND UPPER(CNSGE_CD)=UPPER(R_V_CNSGE_CD) AND
UPPER(FINALDEST_CD)=UPPER(R_V_FINALDEST_CD) AND     UPPER(TPT_TYPE)=UPPER(R_V_TPT_TYPE);
     IF L_N_CNT >0 THEN
          DBMS_OUTPUT.PUT_LINE('ERROR -DUPlicate SI-1');
          SP_SEL_ERR_MSG(5,R_V_ERROR_MSG);
          RETURN;
     ELSE
          DBMS_OUTPUT.PUT_LINE('BEFORE-INSERT');
          INSERT INTO TLSI_SI_MAST
               (     CUST_CD, ACCT_CD, CNSGE_CD, FINALDEST_CD, TPT_TYPE,
                    ACCT_NM, CUST_NM,CNSGE_NM, CNSGE_ADDR1, CNSGE_ADDR2,CNSGE_ADDR3,
                    CNSGE_ADDR4, CNSGE_ATTN, EFFECTIVE_DT, MAINT_DT,
                    POD_CD, DELVY_PL_CD, TRANSSHIP,PARTSHIPMT, FREIGHT,
                    PREPAID_BY, COLLECT_BY, BL_REMARK1, BL_REMARK2,
                    MCC_IND, NOMINATION, NOTIFY_P1_NM,NOTIFY_P1_ATTN , NOTIFY_P1_ADDR1,
                    NOTIFY_P1_ADDR2, NOTIFY_P1_ADDR3, NOTIFY_P1_ADDR4,NOTIFY_P2_NM,NOTIFY_P2_ATTN ,
                    NOTIFY_P2_ADDR1,NOTIFY_P2_ADDR2, NOTIFY_P2_ADDR3, NOTIFY_P2_ADDR4,
                    NOTIFY_P3_NM,NOTIFY_P3_ATTN , NOTIFY_P3_ADDR1,NOTIFY_P3_ADDR2, NOTIFY_P3_ADDR3,
                    NOTIFY_P3_ADDR4,CREATION_DT, ACCT_ATTN, SCC_IND, CREAT_BY, MAINT_BY
                    VALUES(     R_V_CUST_CD,R_V_ACCT_CD,R_V_CNSGE_CD,R_V_FINALDEST_CD,R_V_TPT_TYPE,
                    R_V_ACCT_NM,R_V_CUST_NM ,R_V_CNSGE_NM, R_V_CNSGE_ADDR1,R_V_CNSGE_ADDR2, R_V_CNSGE_ADDR3,
                    R_V_CNSGE_ADDR4,R_V_CNSGE_ATTN,     R_V_EFFECTIVE_DT ,SYSDATE, R_V_POD_CD,R_V_DELVY_PL_CD,R_V_TRANSSHIP ,R_V_PARTSHIPMT , R_V_FREIGHT,
                    R_V_PREPAID_BY ,R_V_COLLECT_BY ,R_V_BL_REMARK1 ,R_V_BL_REMARK2,R_V_MCC_IND,
                    R_V_NOMINATION,R_V_NOTIFY_P1_NM, R_V_NOTIFY_P1_ATTN, R_V_NOTIFY_P1_ADD1, R_V_NOTIFY_P1_ADD2,
                    R_V_NOTIFY_P1_ADD3, R_V_NOTIFY_P1_ADD4, R_V_NOTIFY_P2_NM, R_V_NOTIFY_P2_ATTN, R_V_NOTIFY_P2_ADD1,
                    R_V_NOTIFY_P2_ADD2, R_V_NOTIFY_P2_ADD3, R_V_NOTIFY_P2_ADD4, R_V_NOTIFY_P3_NM, R_V_NOTIFY_P3_ATTN,
                    R_V_NOTIFY_P3_ADD1, R_V_NOTIFY_P3_ADD2, R_V_NOTIFY_P3_ADD3, R_V_NOTIFY_P3_ADD4,
                    SYSDATE,R_V_ACCT_ATTN,R_V_SCC_IND,R_V_USER_ID,R_V_USER_ID
                    DBMS_OUTPUT.PUT_LINE(' SI - REC -INSERTED');
     END IF;

Hi,
I think there is a part of the stored procedure you did not displayed in your post. I think your issue is probably due to a parsed value from java. For example when calling a procedure from java and the data type from java is different than expected by the procedure the ORA-01403 could be encountered. Can you please show the exact construction of the call of the procedure from within java and also how the procedure possible is provided with an input parameter.
Regards, Gerwin

'dimension attribute was not found' error while refresing the cube in Excel

Dear All,
Thanks for all your support and help.
I need an urgent support from you as I am stuck up here from nearly past 2-3 days and not getting a clue on it.
I have re-named a dimension attribute 'XX' to 'xx' (Caps to small)in my cube and cleared all dependencies (In Attribute relationship tab as well).
But while refreshing the data in excel client (of course after processing the full cube) I get an error
'Query (1, 1911) the [Dimension Name].[Hierarchy Name].[Level Name].[XX] dimension attribute was not found' error.
Here I am trying to re-fresh an existing report without any changes with the new data.
Does not it re-fresh automatically if we clear the dependencies or there something that I am missing here (Like order of the dependencies).
Cube processed completely after modifications and able to create new reports without any issues for same data. What else could be the reason?
Can some one help me here?
Thanks in Advance and Regards,

Thnaks alot Vikram,
In se11 ,when i was trying to activate the /BIC/FZBKUPC , it is showing the warnings like
Key field KEY_ZBKUPCP has num. type INT4: Buffering not possible, Transport restricted.What it means.
In PErformance Window it is showing like:
A numeric type was used for a key field. A table of this sort cannot be buffered.When buffering, the table records for numeric values cannot be stored in plain text.
Procedure
You can enter "no buffering" as an attribute of the technical settings and then repeat the activation process. The table is not buffered.
If you want to buffer the table, you must replace the type in the key field by a character type, i.e. that you must modify the table.
Please adivice with your valueable suggestyions.
Thanks Vikram.

PL/SQL reporting problem - "The webpage cannot be found" error

Dear All Expert,
I'm here having a problem on generating apex report using PL/SQL. "The webpage cannot be found" error appear when "Search" button pressed.
I'm appreciating if anyone can give their idea on this issue.
PL/SQL will be fired when "Search" button pressed.
My PL/SQL code as below;
DECLARE
lv_desc CLOB:='';
lv_note_desc varchar2(4000);
lv2      CLOB;
lv_title varchar2(2000);
lv_ti          varchar2(10);
lv_tg          varchar2(10);
lv_tr_cnt     integer:= 0;
lv_ti_code     varchar2(6);
lv_age          number(6):= 0;
lv_note_flag     varchar(1);
fv_note_flag varchar2(6);
fv_ti_code varchar2(6);
ti_code varchar2(20);
ti_name varchar2(50);
ti_tm_code varchar2(6);
ti_test_grp varchar2(6);
note_desc varchar2(4000);
ti_unit varchar2(20);
ti_insurance_code varchar2(20);
ti_price number(14);
ti_sex varchar(1);
ti_age varchar(10);
ti_tr_desc varchar(30);
ti_lolimit number(10);
ti_uplimit number(10);
ti_plolimit number(10);
ti_puplimit number(10);
lv_hkey          number(10):= 0;
lv_found     varchar2(1):= 'N';
lv_itpv     varchar2(4000);
lv_lolimit     char(15);
lv_uplimit     char(15);
lv_tr          char(15);
lv_tc          char(30);
CURSOR READ_C1_REC IS
select ti_code, ti_name, ti_tm_code, ti_test_grp,ti_unit, ti_itpv_flag,ti_attached_cmt
from test_item
where ti_code like NVL(:P11104_TI_CODE,'%')
and ti_test_grp like NVL(:P11104_TG_CODE,'%')
and ti_code not like '0MB%'
order by ti_code;
C1_REC READ_C1_REC%ROWTYPE;
CURSOR READ_C2_REC IS
select tr_sex_code,tr_ageto,tr_agecode,tr_range_desc,tr_mrr_desc,tr_normal_lolimit,tr_upper_uplimit,tr_panic_lolimit,tr_panic_uplimit
from tr_range
where tr_ti_code = lv_ti_code
order by tr_ageto asc,tr_sex_code desc;
C2_REC READ_C2_REC%ROWTYPE;
cursor READ_C3_REC is
select tivh_key
from test_itpvh
where tivh_ti_code = ti_code
order by tivh_efd desc;
C3_REC READ_C3_REC%ROWTYPE;
cursor READ_C4_REC is
select tivd_lolimit,tivd_uplimit,tivd_value,tivd_rr_desc
from test_itpvd
where tivd_hkey = lv_hkey
order by tivd_seqno;
C4_REC READ_C4_REC%ROWTYPE;
BEGIN
lv_title := '<div style="overflow: auto;height: 500px; width: 1000px;"><table style="width: 500px" cellpadding="0" cellspacing="0"><thead><tr><th>Code</th><th>Name</th></tr></thead>';
htp.p(lv_title);
OPEN READ_C1_REC;
LOOP
FETCH READ_C1_REC INTO C1_REC;
EXIT WHEN READ_C1_REC%NOTFOUND;
     lv_note_flag := 'N';
fv_note_flag := 'N';
     fv_ti_code := c1_rec.ti_code;
ti_code := c1_rec.ti_code;
ti_name := ' '||c1_rec.ti_name;
ti_tm_code := c1_rec.ti_tm_code;
     ti_test_grp := c1_rec.ti_test_grp;
lv_desc := '<tbody><tr><td><input type="hidden" name="f01" value="'||fv_ti_code||'" /></td>'||
'<td><input type="text" name="f02" size="20" maxlength="20" value="'||ti_code||'" /></td>'||
'<td><input type="text" name="f03" size="50" maxlength="50" value="'||ti_name||'" /></td>'||
'<td><input type="text" name="f04" size="6" maxlength="6" value="'||ti_tm_code||'" /></td>'||
'<td><input type="text" name="f05" size="6" maxlength="6" value="'||ti_test_grp||'" /></td>';
if c1_rec.ti_itpv_flag = 'Y' then
     lv_note_flag := 'Y';
     open read_c3_rec;
     loop
          fetch read_c3_rec into c3_rec;
          exit when read_c3_rec%notfound;
          lv_hkey := c3_rec.tivh_key;
          lv_found := 'Y'; exit;
     end loop;
     close read_c3_rec;
if lv_found = 'Y' then
          lv_lolimit := 'Lower limit'; lv_uplimit := 'Upper limmit';
          lv_tr := 'Result'; lv_tc := 'Comment';
          lv_itpv := 'INTERPRETED TEST RESULT'||chr(10)||'-----------------------'||chr(10)||lv_lolimit||lv_uplimit||lv_tr||lv_tc||chr(10);
          open read_c4_rec;
          loop
          fetch read_c4_rec into c4_rec;
          exit when read_c4_rec%notfound;
          lv_lolimit := to_char(c4_rec.tivd_lolimit,'999990.999');
          lv_uplimit := to_char(c4_rec.tivd_uplimit,'999990.999');
lv_tr := c4_rec.tivd_value;
          lv_tc := c4_rec.tivd_rr_desc;
          lv_itpv := lv_itpv||chr(10)||lv_lolimit||lv_uplimit||lv_tr||lv_tc;
          end loop;
          close read_c4_rec;
     end if;
note_desc := lv_itpv||chr(10)||chr(10);
     end if;
     if ltrim(rtrim(c1_rec.ti_attached_cmt)) is not null then
     lv_note_flag := 'Y';
     note_desc := note_desc||'ATTACHED COMMENTS'||chr(10)||'-----------------'||chr(10)||ltrim(rtrim(c1_rec.ti_attached_cmt))||chr(10);
     end if;
begin
     select unit_name into ti_unit
from unit_tbl
where unit_code = c1_rec.ti_unit;
     exception when no_data_found then
ti_unit := null;
     end;
lv_desc := lv_desc ||'<td><input type="text" name="f06" size="20" maxlength="20" value="'||ti_unit||'" /></td>';
begin
     select imh_insurance_code, imh_curr_p1 into ti_insurance_code, ti_price
     from item_masterh
where imh_code = c1_rec.ti_code;
     exception when no_data_found then
     ti_insurance_code := null; ti_price := null;
     end;
lv_desc := lv_desc ||'<td><input type="text" name="f07" size="20" maxlength="20" value="'||ti_insurance_code||'" /></td>'||'<td><input type="text" name="f08" size="14" maxlength="14" value="'||to_char(ti_price)||'" /></td>';
lv_ti_code := c1_rec.ti_code;
lv_tr_cnt := 0;
lv2 := '<table width="100%" border="0" bgcolor="#009900" cellspacing="0">';
OPEN READ_C2_REC;
     LOOP
     FETCH READ_C2_REC INTO C2_REC;
     EXIT WHEN READ_C2_REC%NOTFOUND;
     lv_tr_cnt := lv_tr_cnt + 1;
if c2_rec.tr_agecode = 'Y' then
lv_age := c2_rec.tr_ageto / 365;
     elsif c2_rec.tr_agecode = 'M' then
          lv_age := c2_rec.tr_ageto / 30;
     else
          lv_age := c2_rec.tr_ageto;
     end if;
     ti_sex := c2_rec.tr_sex_code;
ti_age := lv_age||c2_rec.tr_agecode;
ti_tr_desc := ' '||c2_rec.tr_range_desc;
     ti_lolimit := c2_rec.tr_normal_lolimit;
     ti_uplimit := c2_rec.tr_upper_uplimit;
     ti_plolimit := c2_rec.tr_panic_lolimit;
     ti_puplimit := c2_rec.tr_panic_uplimit;
if c2_rec.tr_range_desc = 'MRR' then
     lv_note_flag := 'Y';
     note_desc := 'MRR DESCRIPTION'||chr(10)||'---------------'||chr(10)||c2_rec.tr_mrr_desc||chr(10)||chr(10)||note_desc;
     end if;
if lv_note_flag = 'Y' then
fv_note_flag := 'Y';
end if;
lv2 := lv2 || '<tr><td><input type="text" name="f09" size="1" maxlength="1" value="'||ti_sex||'" /></td>'||'<td><input type="text" name="f10" size="10" maxlength="10" value="'||to_char(ti_age)||'" /></td>'||'<td><input type="text" name="f11" size="30" maxlength="30" value="'||ti_tr_desc||'" /></td>'||'<td><input type="text" name="f12" size="10" maxlength="10" value="'||to_char(ti_lolimit,'99990.999')||'" /></td>'||'<td><input type="text" name="f13" size="10" maxlength="10" value="'||to_char(ti_uplimit,'99990.999')||'" /></td>'||'<td><input type="text" name="f14" size="10" maxlength="10" value="'||to_char(ti_plolimit,'99990.999')||'" /></td>'||'<td><input type="text" name="f15" size="10" maxlength="10" value="'||to_char(ti_puplimit,'99990.999')||'" /></td></tr>';
     END LOOP; lv2 := lv2||'</table>';
     CLOSE READ_C2_REC;
if lv_tr_cnt = 0 then
     if lv_note_flag = 'Y' then
fv_note_flag := 'Y';
end if;
     end if;
lv_desc := lv_desc||'<td><input type="hidden" name="f16" value="'||fv_note_flag||'" /></td>'||'<td><input type="hidden" name="f17" value="'||note_desc||'" /></td>';
     lv_desc := lv_desc||'<td>'||lv2||'</td></tr></tbody>';
htp.p(lv_desc);
END LOOP;
CLOSE READ_C1_REC;
htp.p('</table>');
END;
Thanks you very much in advance!

First thing I'd say is that you're code doesn't compile:
lv_title := '   // <----Secondly, does no-one use comments anymore? Isn't this drilled into people in programming classes at colleges? There's a whole bunch of code there but not much in the way of explanation as to what you are trying to achieve. It might make perfect sense to you now but try going back to it in a year and see if you can untangle it's purpose.
Thirdly, is there a specific reason why you've chosen to manually generate a report in PL/SQL, rather than delegating it to a report region? I understand that for particular formatting requirements (denormalised data, cells-within-cells etc), it is occasionally necessary to go to these lengths but I can't help but feeling a well-written query could simplify a lot of this, particularly the references multiple cursors.

Private Key Not Found Error in Ldaps

Hi,
I am facing "Private Key Not Found" Error in ldaps. The key and the SSL certificate is stored under the same location. The certificate is self signed certificate and in .pem format. When I am trying to install the certifcate through SUN ONE Console it throws the following error
"Either this certificate is for another server, or this certificate was not requested using this server".
can any one help me in this regard.
Regards
Senthil
Edited by: senlog80 on Dec 30, 2008 3:18 AM

Or even better, check the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=924320&_NLANG=E">924320</a>.
<b>Symptom</b>:
When you execute a query with virtual characteristics or key figures, the system issues the following error message:
Object FIELD I_S_DATA-<key figure> not found
<b>Other terms</b>
RSR00002, RSR_OLAP_BADI
<b>Reason and Prerequisites</b>
This problem is caused by a program error.
<b>Solution</b>
If the virtual characteristics or key figures are implemented using the enhancement RSR00002 (CMOD), implement the corrections.
If the virtual characteristics or key figures were created directly as implementations of the RSR_OLAP_BADI BAdI, compare the source code of the INITIALIZE method with the corresponding source code example. During the call of GET_FIELD_POSITIION_D, <L_S_SK>-VALUE_RETURNNM must be transferred instead of <L_S_SFK>-KYFNM.
Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch 08 or SAPKW70008) into your BI system. The Support Package is available when Note 0872280"SAPBINews BI 7.0 Support Package 08", which describes this Support Package in more detail, is released for customers.
In urgent cases, you can use the correction instructions.
To provide advance information, the note mentioned above may be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version".
Assign pts if helpful.

I have a nidaq32.dll not found error. If i have already tried replacing the visa32.dll what else can i try?

I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
Gerry

Hello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll.

No Data Found Error in wwv_flow_files

Hello All,
I have written a procedure to upload the .csv file data into one of my database Table. It was working fine some days back, but when I try to upload a .csv today, it gives me error "No Data Found".
This is the Query I am using to fetch the data from wwv_flow_files table:
select blob_content into v_blob_data
from wwv_flow_files
where last_updated = (select max(last_updated) from wwv_flow_files where UPDATED_BY = UPPER(:APP_USER))
and id = (select max(id) from wwv_flow_files where updated_by = UPPER(:APP_USER));
this is returning No data found error.
Please suggest what is the problem.
Apex vesion : 4.0.1.00.03
DB: 11g
Thanks
Tauceef

Hi Trent,
As I said, I am using this code from a long time ago, it was working fine before and I have uploaded many files using this code.
But suddenly I don't know what happen it start giving this error.
For making sure that this statement is the one which is giving "no data found" error I commented all the other select statements
and I still got no data found. So it's confirmed.
One more thing, I tried to run this code in SQL command by hard coding the :APP_USER value and this is what I got in the result:
BLOB_CONTENT
[unsupported data type]
means this code is returning something but at run time it is giving no data found.
Please suggest.
Thanks
Tauceef

No data found error on Form on a Table with report

Hi Everyone, I'm using Application Express 4.1.0.00.32 on Windows 7. I built a Form on a table with report. Earlier I was using rowid as a passing parameter but then I had to change it to primary key column from report to form.
So in the "Fetch row process" I changed the "Items containing primary key value" and "Primary Key column" to P1004_PERSON_ID and PERSON_ID respectively. Which is my primary key.
My Form is working exactly fine but at on point it throws "no data found error".
I have a required date field in the form. So if the user doesn't fill in the date field and try to save the form, it throws the "Feild required error" and then when user enters date and try to save then it throws the error "No data found.". here is the snapshot... snapshot
How can I fix this error.I'm really stuck.
I checked debubber..it is as follows... in debughger it's still showing rowid. I don't know why. How can I fix that.
Execution
Message
Level
Graph
0.00233
0.00932
S H O W: application="101" page="1004" workspace="" request="" session="123235901404364"
4
0.01161
0.00102
Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
4
0.01261
0.00046
alter session set nls_language="AMERICAN"
4
0.01307
0.00042
alter session set nls_territory="AMERICA"
4
0.01348
0.00053
NLS: CSV charset=WE8MSWIN1252
4
0.01401
0.00042
...NLS: Set Decimal separator="."
4
0.01443
0.00053
...NLS: Set NLS Group separator=","
4
0.01495
0.00050
...NLS: Set g_nls_date_format="DD-MON-RR"
4
0.01545
0.00051
...NLS: Set g_nls_timestamp_format="DD-MON-RR HH.MI.SSXFF AM"
4
0.01597
0.00050
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.01647
0.00079
...Setting session time_zone to -05:00
4
0.01726
0.00046
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.01772
0.00060
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.01832
0.00092
...NLS: Set g_nls_date_format="DD-MON-YYYY"
4
0.01924
0.00049
...NLS: Set g_nls_timestamp_format="DD-MON-YYYY HH24.MI.SSXFF"
4
0.01973
0.00083
...NLS: Set g_nls_timestamp_tz_format="DD-MON-RR HH.MI.SSXFF AM TZR"
4
0.02056
0.00099
NLS: Language=en-us
4
0.02154
0.00157
Application 101, Authentication: PLUGIN, Page Template: 5091946581246503
4
0.02312
0.00065
...fetch session state from database
4
0.02377
0.00106
fetch items
4
0.02483
0.00065
...fetched 103 session state items
4
0.02548
0.00194
Authentication check: NTLM (NATIVE_CUSTOM)
4
0.02742
0.00188
...Execute Statement: begin declare begin wwv_flow.g_boolean := f_ntlm_page_sentry_parm; end; end;
4
0.02930
0.00050
... sentry+verification success
4
0.02980
0.00042
...Session ID 123235901404364 can be used
4
0.03021
0.00114
...Application session: 123235901404364, user=VARMAN01
4
0.03135
0.00162
...Check for session expiration:
4
0.03297
0.00075
Session: Fetch session header information
4
0.03372
0.00113
...Setting session time_zone to -5:00
4
0.03485
0.00080
Branch point: Before Header
4
0.03565
0.00598
Fetch application meta data
4
0.04165
0.00081
...metadata, fetch computations
4
0.04245
0.00076
...metadata, fetch buttons
4
0.04321
0.00086
Setting NLS_DATE_FORMAT to application date format: DD-MON-YYYY
4
0.04406
0.00058
Setting NLS_TIMESTAMP_FORMAT to application timestamp format: DD-MON-YYYY HH24.MI.SSXFF
4
0.04464
0.00049

Just an observance... SQL is still showing the rowid instead of the P1004_PERSON_ID ??
where "PERSON_ID" = :p_rowid;
should it not be :
where "PERSON_ID" = :P1004_PERSON_ID:
thx, Bill

File not found error from scheduler

Hi,
We have a scheduler file with .cfa extension in the cf scheduler which trigger some mails to certain recipients on execution.
At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
path. On direct execution of the given url, the file is executed successfully and mails are fired.
But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
found the error message 'File not found'.
Is it possible that the file get executed when directly browsing the url and shows 'file not found' error
while executing via cf scheduler?(CF 8 is used.)

To be more specific,
the url format given in the cf admin scheduler is like this:
"http://www.domainname.com/myfolder/myfile.cfa"
A file path to log the output is also given to publish.
If we copy the above url to a browser and execute, the file gets executed and mails are fired.
If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
showing error '/myfolder/myfile.cfa' file not found.

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

File not found, Error= –43

Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.

Hi,
I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
DS

File not found error when tried to open Document ID settings page

Hi
when i open sitesettings>site collection administratin >Document
ID settings
it shows
file not found error
adil

Hi,
first we need to figure out the error. change the web.config so that you can see the error on browser
1) Obtain the complete call stack instead of the default error page:
<SafeMode MaxControls="200" CallStack="false"/>
to
<SChangeafeMode MaxControls="200" CallStack="true"/>
2) CustomeErrors mode value (in the system.web section) is set to Off:
<customErrors mode="On">
to
<customErrors mode="Off">
Change these value in "c:\inetpub\wssroot" CA dirctory web.config and
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
now again try to do the action. you will get the error on screen.
Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

File not found error (404) from web browser

I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
different Oracle home. The ifsconfig went thru fine.
However I am unable to access the login page ( I executed
ifsapachesetup ). I tried to access
http://<machine>:<port>/servlet/files.
I see the following error in Jserv.log
ajp12: Servlet Error: NoClassDefFoundError:
oracle.ifs.protocols.dav.impl.IfsDavServlet
On the browser I get File not found error ( HTTP 404 )
Do I need to perform additional steps on Solaris machine ( apart
from executing apache setup script ).
Please help me.

Make sure you have started all the services:
- ifsjservctl -start
- ifslaunchdc
- ifslaunchnode
- ifsstartdomain
all are in the iFS bin directory.
Keith

FILE not found error: j2ee/home/applib/applications-mapping.xml (No such fi

Hi EveryBody
i have my applications-mapping.xml file already in the applib directory, but when i try to conect to a remote ejb i had this error[b]
FILE not found error: j2ee/home/applib/applications-mapping.xml (No such file or directory)
can anyone help??

gday
Is the error on the client or server?
What role in the application does applications-mapping.xml fulfill?
How are you loading the file in?
-steve-

File not found error when opening securedoc.html

We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
The time after rebooting when it did work it pointed to file on my local computer hard drive:
file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

used bridge, didn't work.
tried right-click, double click..open in program.
same error.
files work in other adobe products.....
only way to get a jpg in there is to "paste" it in.

Found error in OWB

Similar Messages

Maybe you are looking for