Found solution for connection problems iPod Nano 3rd gen to Windows Vista!!

Hello people!
I just found a solution to connection problems with iPod Nano 3rd generation when connecting it to a Windows Vista machine.
Because of 'security reasons', Vista asks you to check the drive for errors when connecting the iPod.
The thing to do here:
Click the cross to exit the windows; DON'T CLICK 'do not check drive'!!!!
So just click the red cross to close the window and the iPod should be recognized by iTunes.
Symptoms:
- iPod cannot be recognized by iTunes when you connect it.
- iPod doesn't show up as a drive in Windows Explorer.
I really really hope I solved your problem. Have fun!
Jasper

Have not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!

Similar Messages

Connecting an iPod nano (3rd generation) to Windows Vista

I have purchased an iPod nano (3rd generation) and I tried to connect it via USB to a Windows Vista Enterprise Laptop. Even though the iPod is connected (as it appears on the iPod screen), Windows fails to locate the driver to install it. I have tried several articles found in the discussions forum, reseting the iPod nano, re-installing iTunes, and rebooting Vista, but no solution given.
Please advise.
Thanks

Have not been able to connect to iTunes for months, right about the time Microsoft put out the Zune! Would love to hear from a lawyer about a class action lawsuit againat Apple since this issue has not been resolved and we are required to use iTunes. In the meantime, filing a complaint with the Federal Trade Commission!

Mac ipod nano 3rd gen - to windows xp

Hey every body,
I currently own a ipod nano 3rd gen. I however have mbp at home(where the nano is registerd) Till yesterday i saved a file on my nano. Tried opening the file today on the pc. However it does not come up. It says that the nano is not formatted. Anyone know how i can access this file?

As far as I know you can't. A PC can't read a Mac-formatted iPod is the problem.
If you have to use the Nano on both OS, you will have to have the Nano in PC format. A Mac can read a PC formatted iPod, but not the other way around, as I said above.
Message was edited by: StarDeb55

Can't connect my iPod classic 5th gen to Windows Vista

I bought an iPod Classic 30gb off of Ebay and I can't get it to connect to my computer. My Computer runs off Windows Vista and I've tryed everything. I tryed reinstalling my Itunes with the newist verson. Even tryed puting it in disc mode. The Ipod and cord works fine and the iPod is formatted for windows. It dosen't show up on the computer any were, not even as a unknown USB or anything like that. I know the cord work cause the Ipod charges when I plug it in. I even tried to get the iPod to work on my bother's windows XP but it still didn't connect. Please Help! If need any more info ask.

Most likley, why the person is trying to ge rid of it.
Do the iPod Disk Diagnostic as posted earlier by tt2, it wont solve your problem, but helps in troubleshooting.
For others reading this I would also suggest getting the HDSmartdata before buying any pre-owned iPod Classic.

HT1399 I just downloaded the newest version of itunes, and when I connect my ipod nano (3rd gen), I can no longer see my playlists (on the left hand side). I hate the new format...any way to revert back to the old one?

I just downloaded the newest versionof itunes. Now when I plug in my ipod, I can no longer see my playlists (listed on the left hand side). The new format is very confusing! How do I drag and drop songs into specific playlists I have? Is there a way to revert back to the old itunes?

I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

Ipod nano 3rd gen unit is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help

ipod nano 3rd gen unit windows xp. Nano is locked, though never have done a manual lock on it. Screen is lit and lock button shows. Have latest itunes, but nothing syncs. Have done everything on supports pages including toggle hold button, etc. Screen stays locked. Help please.

Sounds like the hold switch is broken, meaning you'll need to have your iPod serviced/replaced either by Apple or a third party repair company.
B-rock

IPod Nano 3rd Gen Issues: would be grateful for any help

Dear all,
I recently purchased an iPod Nano 3rd Gen for my wife. I have been using a mac for 7 years, still have my first iPod 5GB scroll wheel as well as a 60 GB iPod video 5.5 Gen.
Here's what's happening.
iPod Nano connected via dock (which is in a USB hub...could that cause problems?)
Connect, sync, no worries.
Update iPod Nano software to 1.0.2.
iPod then, halfway through syncing, flashes the Apple Logo every 6-7 secs and then does the same again.
It is not recognised in iTunes like that.
Any help?
A hopeful Dan

Hi,
Same thing just happened to me - I have put the Nano 3G into disk mode (hold Menu and Select for 10 seconds then immediately hold Play/Pause and Select).
Just doing a factory restore now, that should bring it back to a brand new state and will try again from there.

Have you been having problems with ipod nano 3rd gen?

Have you been having problems with your ipod nano 3rd gen? got a windows xp computer? is your pc not recognizing it? I think i may have the solution. After 2 2 hour calls to apple tech support they were stumped. we reset it again and again, reinstalled itunes again and again. and they had no solution for me. I went to my device managerand there was a device called (apple Ipod USB driver) with a yellow exclamation point. I tried updating driver but to no avail. I tried uninstalling and reinstalling and nothing. But then I had an epiphany. I went to the device manager right clicked the apple ipod usb device clicked properties then update driver. Hardware wizard went up and I chose not to install automatically. and i chose to install driver manually. and then I installed a generic usb mass storage driver in its place and presto!!! it worked! it was instantly recognized by itunes and it took me to the registration page. I did what the apple support team wasn't able to do for 4 hours. I wonder if they're accepting applications... Anyway i hope this helps anyone out there cause i know i went through a lot of stress.

the driver is just a regular usb mass storage driver. it's in your computer. it's just a matter of installing it manually where it saya to include the location of the driver click browse and choose c:\windows\system32

IPOD NANO 3rd Gen problem Apple Mac set up PC BASED MAIN UNIT

I have been asked by a friend to help out because they asked to add music to their new IPOD. But the owner is a tech scared person. They gave the unit an IPOD NANO 3rd Gen to my friend who uses Apple MAC they set up the IPOD with their Itunes and added the songs.
Later they wanted new tracks but have now downloaded ITUNES to their own PC Windows Vista system. The tracks were added to a USB memory stick and transfered and added to the PC Vista ITUNES. But now the IPOD Nano will not register on the Windows Vista ITUNES system but will show up on the "My computer"
I have reset the nano by holding the on/off and menu etc to get the Apple logo, the unit beeps as does the laptop PC Based ITUNES etc but will still not register on the ITUNES or allow me to sync the music from the ITUNES to the IPOD.
Can anyone advise how I can reformat the IPOD or reset the IPOD and remove all music currently on it to start again but get it to register/set up and show on the ITUNES on the windows VISTA unit rather than the mac based system.
Thanks,
Global_mongrel

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

Driver for Ipod Nano 3rd Gen

Hi
Just brought Ipod nano 3rd gen and plugged it into PC. It is not able to install properly - computer says it can't find driver. Any ideas how to resolve this?

I am having the same issue here.
OS: Vista ultimate 64-bit
iTunes: 7.6.0.29 (64-bit)
iPod: Nano 8gb 3rd gen
I currently have a 60gb iPod Photo that works flawlessly. I bought the Nano tonight, brought it home, and charged it up. Plugged it in, and now Windows Vista is asking for drivers for the Nano. Doesn't recognize the Nano at all.
The Nano knows it's plugged in, and is giving me the "eject before disconnecting" screen. However, Vista wants drivers, and iTunes doesn't recognize the Nano is connected whatsoever.
Can someone please shed some light on this for us? Thanks.
[edit] Yes, I have reset the Nano. Yes, I have uninstalled iTunes, rebooted and re-installed iTunes. Yes, I also tried putting the Nano into Disk Mode manually and connecting it to the system, but the system still wants drivers....
[edit2]And yes, I'm using the administrator account on the system, too.

Whenever i connect my ipod touch 3rd gen to itunes itunes responds really slowly and when i try and sync it it says sync in progress on my ipod screen but then is stuck with "verifying "matts ipod" at the top of itunes and stays like that for ages.. help

whenever i connect my ipod touch 3rd gen to itunes itunes responds really slowly and when i try and sync it it says sync in progress on my ipod screen but then is stuck with "verifying "matts ipod" at the top of itunes and stays like that for ages.. help

You buy one and only one download.
As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
http://www.apple.com/support/itunes

My PC Shuts Down When I Plug In My New IPod Nano 3rd Gen.

The title of this post pretty much says it all. Got me my new iPod Nano 3rd gen. yesterday. Brought it home, booted up the puter, loaded iTunes and plugged that sucker in. Well first iTunes kindly instructed me that I would have to download it's newest software, which I did.
Then soon afterwards when I thought i was set, I plugged in my new 3rd gen iPod Nano to the pc and as soon as I did that my pc shut down completely, and restarted. Shut down is putting it mildly, I mean it just went 'kablink" and then was restarting.
I tried uninstalling iTunes, cleaning my temp folder, my internet cache, then reinstalling iTunes anew, still nada. All to no avail, people, because each and everytime I plug in my new iPod Nano, no sooner than i do this my pc summarily goes "kablink" on me and starts booting up again.
NOW I STILL have my iPod Nano 2nd gen, and it works fine, even with the newest iTunes software, it doesn't screw up my pc like the new 3rd gen iPod Nano does.
Now I am to conclude that the problem lies in the 3rd gen iPod itself. How could it not? My iPod Nano 2nd gen works absolutely fine, and everytime I plug in my new iPod Nano, I shut down in a flash withtout fail. Anyone of you have this error? I would love to know short of calling iTunes tech support about what to do about this, this is a MAJOR bummer for sure. Now I have to be concerened about whether or not I am ever going to get this thing to work now.
Is the iPod broken? If not why the shutdowns then? Please advise. Many thanks in advance.

Hey, I bought an iPod nano 3rd gen yesterday and I have exactly the same prolem you are describing in your message. Have you found any solution to this?

How long will a 5 year old iPod Nano 3rd gen's battery last?

Hello,
I am thinking about buying a used mint green iPod Nano 3rd gen off of ebay. I was wondering how long the battery would last?
Thanks,
themiz

i found this from another user and it worked for me!
I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all. Mine is also refurbished.
I called Support and the automated phone person gave me these steps:
1. Plug the iPod into the computer
2. Set it down on a flat surface
3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

I can't connect my iPod nano 6th gen to iTunes 11.1.

I can't connect my iPod nano 6th gen to iTunes 11.1. It keeps saying 'it could not be identified properly". I've tried all the steps on troubleshooting page but nothing's successful. Anybody got some help?

I found I had the same problem so I uninstalled iTunes, Apple Mobile Device Support, and Apple Application Support and then redownloaded the latest version of iTunes which reinstalled everything I uninstalled and I was able to sync my 1st Gen iPad and my 3rd Generation Nano with iTunes 11.1

Ipod nano 3rd gen (click wheel)

I currently have a ipod nano 3rd gen with a click wheel. I have uninstalled, reinstalled itunes and rebooted my computer already (I have windows XP). It shows up in "My Computer" as unknown but itunes will not reconize the ipod is connected, but does with my other ipod. I've tried changing the drive letter on this 3rd gen; but it wont appear to even change the drive letter. I believe I need to download the drivers (its what i had to do with my previous ipod) but I would like a clue where to download the drivers from, or someone to shed any light and a solution for this issue. My ulitmate goal is to get itunes to reconize it so that I can restore the ipod
Thanks.

Clickwheel games are no longer available in the iTunes store. Sorry.
B-rock

Found solution for connection problems iPod Nano 3rd gen to Windows Vista!!

Similar Messages

Maybe you are looking for