FP 11.8.800 doesn't work in OSX 10.6.8, Safari.

FP no longer works since installing the 11.8.800 update on my MacBook Pro, OSX 10.6.8, using Safari/Firefox. No videos play at all, black screen with 'Plug-In Failed' message.
I have tried all advice on the Adobe support pages, followed all instructions without success.
Please help as I am taking online courses that require me to watch video's online and this is proving very prohibitive.
Previous install of Flash worked without trouble.
Thanks,
Nick

I've now managed to install 10.3, it won't work on Safari ('Blocked Plugin') but does run on Firefox. So it's half a solution, not an adequate one but a work around at least.
Is anyone else having this problem with the 11.8 update?
Does anyone from Adobe read these messages?
Am I alone in the universe?
cheers,
Nick

Similar Messages

  • My app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    my app store doesn't work at all....safari doesn't work properly....it shows something like super fish....if i try to login to app store it shows connection failed. i wanted to re install osx or install yosemite beta

    HI ..
    The only way to reinstall OS X on a Mac already running v10.9 is to use OS X Recovery.
    Starrtup your Mac while holding down the Command + R keys.
    From there you should be able to access the built in utilities to repair the startup disk and reinstall OS X.
    Please read >  OS X Recovery

  • What apple email program works with OSX 10.6.7?  I have Apple mail 4.4, but it doesn't work with OSX 10.6.7?

    What apple email program works with OSX 10.6.7?  I have Apple mail 4.4, but it doesn't work with OSX 10.6.7?

    The reason you're seeing this is that you have somehow gotten an outdated copy of Mail on your system.  One possible reason is that you moved Mail out of the Applications folder (or into a sub-folder inside the Applications folder), in the process preventing it from being updated.  You'll want to put Mail back directly in the Applications folder if this is the case.  The other possibility is that you have somehow installed, restored or copied an old copy of Mail on your machine.
    In either case, as long as Mail is in the right place, applying the combo updater will update Mail to the current version.  Software Update cannot do that because Software Update sees that you are using the current version of the OS and believes there is no need to update, while the combo updater "forces" installation of all updated files.

  • "Autoplay" doesn't work for playing audio in mobile Safari (iphone)?

    I have 2 problems that would like solve, please help me. The first one is I've noticed that QuickTime doesn't play audio automatically when setting attribute "Autoplay" to true. The second my problem that I need playback audio in background mode, that is without opening Quicktime player window. Below my code how I try doing it...
    <OBJECT ID='ctl05$MPHolder_MediaPlayer' classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' codebase='http://www.apple.com/qtactivex/qtplugin.cab' height=0 width=0> <PARAM name='src' value='http://kvinelearning.eu/iphone/els/IphoneSoundTest/2.mp3'> <EMBED height=0 width=0 SRC='http://kvinelearning.eu/iphone/els/IphoneSoundTest/2.mp3' controller='false' qtsrc='http://kvinelearning.eu/iphone/els/IphoneSoundTest/2.mp3' autoplay='true' PLUGINSPAGE='www.apple.com/quicktime/download' EnableJavaScript='true' NAME='ctl05$MPHolder_MediaPlayer' /></OBJECT>
    Thanks all in advance and waiting replies.
    Valeriy.

    QuickTimeKirk, thanks a lot for your answer, but I'm interesting in Mobile Safari, not IE, FF or Opera This is these problems appear only for iphone browser, for others ones it works fine, even in Safari for Windows. So, autoplay still doesn't work... And please consult me about quicktime player browser's plugin, I mean why I cannot play sound with javascript function [documetn.getElementById("qtplayer").Play()] without opening sound track in plugin window? I really need playback in background. Or is it feature of quicktime?
    Thank you in advance,
    Valeriy.

  • QT Pro Export for Web--poster doesn't work in Firefox or IE, only Safari

    Hi QuickTime gurus (within Apple and in the 'real world
    I had thought that when you Export for Web in QuickTime Player Pro, the 'poster' movie would display in all browsers, on Mac and Windows.
    Unfortunately, the poster does NOT work in Firefox (neither Mac nor Windows) nor in IE. It only works in Safari.
    See this example - http://www.wellesley.edu/~kenny/a.html
    Am I doing something wrong, or is there something wrong with the JavaScript such that it doesn't work in all browsers, or....?
    Thanks...k

    Ok here try this:
    http://setfreedenver.org/a/readme.html
    And here's the zip file for the above.
    http://setfreedenver.org/a.zip
    You should have four files in the folder that makes everything for the video in the html:
    video.m4v This is the actual video that plays.
    video.mov This is the referance video that points to video.m4v
    poster.jpg This is the poster frame.
    html.html This is the html for the above video to play in.
    Move one of the above to somewhere else and it will break the video playing in the html.
    Sidebar:
    I couldn't get this to work on my server. I had to go to my server control panel (somewhere out there in Texas) and make a MIME Type setting for the .m4v, so the video could play. Not all servers are setup to play different kinds of videos, documents or images. So, if you ever run across something that plays locally on your computer and not on your sever and your at your wits end.. Contact you server administrator and have them check the MINE setting on the server.
    Message was edited by: David M Brewer

  • Wifi doesn't work with OSX 10.8

    wifi doesn't work any more with OSX 10.8

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    old... http://docs.info.apple.com/article.html?artnum=106653
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Cant open logic 9,get a message saying logic doesn't work with osx lion 10.7.5

    I'm running OSX Lion10.7.5 and I reinstalled Logic 9 and a message comes up "logi 9.0.0 doesn't work with this OSX", I first installed Logic when I had OSX 10.5.8 and it worked.

    Update Logic Pro 9.0.0 to 9.1.8
    I assume you are using the boxed DVD set so here is the appropriate link....
    http://support.apple.com/kb/dl1601

  • IMac iSight camera doesn't work in oSX

    The built in iSight camera in my iMac has stopped working in OSX. It certainly used to work in the past but I'm not sure exactly when it stopped.
    This is definitely an OSX software issue as the camera works when using Skype on Windows XP on Parallels on the same Mac.
    iChat, Skype and Photo Booth on OSX all just show a black screen for video. The green camera light is on.
    System Profiler shows USB / USB High-Speed Bus / Built-in iSight
    This issue seems to come up a lot and I have tried the following without success:
    - reset the SMC (power down computer and unplugging all connectors)
    - reset the PRAM
    - created a new account to see if the issue occurs in that account - it does
    Any suggestions?

    +(1) You have tried some good troubleshooting already. Your iSight can only operate with one application at a time, so, when you test OS X apps:+
    + • quit all other apps,+
    + • have nothing active in fast user swithching, and+
    + • have no Windows® items using iSight.+
    iSight does not work when only iChat, Photo Booth, Skype or iMovies is running. All just show a black screen.
    +(2) Restart the Mac and check iSight with no other apps or Login Items running. If the problems persist, try all relevant suggestions from:+
    +  http://support.apple.com/kb/HT2090+
    I have gone through this already several times - I came across these instructions googling for the problem of iSight not working .
    +In your testing, you should add QuickTimeX to the list of OS X apps you test with iSight.+
    With QuickTime I again get a black screen with the New Movie Recording command and the message "Recording failed because no data was received. Make sure the media input source is turned on an playing".
    +If your iSight problem still occurs in more than one app and more than one user account, the reset suggested there often restores proper function of inbuilt iSight.+
    +(3) The instructions for proper SMC reset of your iNtel iMac are found here:+
    +  http://support.apple.com/kb/HT3964+
    +Be certain to begin with the instructions in the section marked "Before Resetting the SMC". After that, the reset instructions specific to your iMac 2.4 GHz Intel Core 2 Duo are are follows:+
    I have done this 3 times. I went through these instructions before posting this message. Additionally I unplugged all connectors to the Mac.
    +(4) If your problem persists and you need to post back for other suggestions, please let us know which OS X apps you tested in more than one user account and whether any of them worked properly. Also confirm that those tests were done when no other apps or OSs that can use iSight were running.+
    iChat, Skype, Photo Booth, Quicktime and iMovie do not work.
    I only had one of these applications running at a time.
    I set up another user account and none of these applications worked.
    The iSight camera does work using Skype on Windows XP running on Parallels. Note: Parallels is not running when I tested the OSX applications.
    +(5) If you need to post back for other suggestions, please also verify that your inbuilt iSight is recognized as a USB device in your Mac's System Profiler utility.+
    Yes, the built-in iSight does appear in System Profiler under USB > USB High Speed Bus > Built-in iSight
    Built-in iSight:
    Product ID: 0x8502
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 1.45
    Serial Number: 606F6A72C9AEA8D8 (03.01)
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple Inc.
    Location ID: 0xfd400000
    Current Available (mA): 500
    Current Required (mA): 500
    +(6) If you need to post back for other suggestions, in addition to Skype, please also list any webcam-enabled third-party software you use, and tell us whether you have verified that it is the current version compatible with Mac OS X 10.6.4+
    I do not have any other 3rd party webcam applications other than Skype. Additionally, I only installed Skype after I discovered the iSight was not working in order to see if the same problem happens with Skype.
    I took a quick look at the Console. Interestingly the following message appears from all of the applications where iSight does not work. I also have a MacBook Pro where iSight does work and the same messages do not appear with the same applications.
    28/08/2010 14:34:59 iChat[632] __CFServiceControllerBeginPBSLoadForLocalizations timed out while talking to pbs
    28/08/2010 14:35:05 iChat[632] ------ startPreview: previewing: 2
    28/08/2010 14:35:18 iChat[632] [Warning] FZVideoConferenceController: _localVideoClientCount decremented below 0!
    28/08/2010 14:36:51 QuickTime Player[642] __CFServiceControllerBeginPBSLoadForLocalizations timed out while talking to pbs
    28/08/2010 14:38:49 Skype[649] __CFServiceControllerBeginPBSLoadForLocalizations timed out while talking to pbs
    28/08/2010 14:39:47 Photo Booth[655] __CFServiceControllerBeginPBSLoadForLocalizations timed out while talking to pbs

  • Laser jet professional utility doesn't work (Mac OSX 10.7)

    I've been having connection issues with my LaserJet P1102w lately so I decided to try to set it up for wireless connection (instead of USB). I found that the Ulitity (HP LaserJet Professional Utility), when launched, doesn't do anything.
    The application has a generic application icon. It shows "HP LaserJet Professional Utility" in the menu bar, but no window opens up, and there are no options under the menu.
    I have tried removing the utility and reinstalling. I have updated the firmware through an update. I have used Apple's Software Update to update the drivers. However, nothing happens when I launch the utility.
    I'm running Mac OS X 10.7.5.
    Ideas?

    Hi @bldxyz ,
    I see that you having issues with the Utility not opening, to setup the wireless network on the printer. I can help you with this.
    Make sure Safari is set as the default browser. (sometimes the EWS won't open if it isn't set as the default)
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Reset the printer first to clear out any previous network settings.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print out a configuration report and make sure the SSID and IP address are cleared.
    Printing a Configuration Page. Select Method two.
    Leave the USB cable connected. Delete the printer from Printers and Scanners and add the printer back in again.
    Try accessing the Utility again.
    If you are still having issues opening the Utility, please do the following.
    Close any applications.
    On the Apple menu bar, click Go, Computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, it should open up the Embedded Web Server for the printer to configure the wireless, then click the Networking tab, click Wireless on the left and fill out your information. (make sure infrastructure is selected and alpha or numeric is chosen) Apply settings.
    You should get a solid blue light on the printer in about 1 minute.
    Then delete the USB driver and add the network printer:
    Click on the Apple.
    Click System Preferences.
    Click the Print and Scan icon.
    Highlight the printer and click on the - sign to delete the printer. (USB driver)
    Disconnect the USB cable.
    Then click the + sign and select the printer from the list and click add. (P1102w Bonjour)
    Test the printer.
    If you need further assistance, just let me know.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Java JPopupMenu doesn't work on OSX

    Using OSX 10.6.4 and Java 1.6.0_22, the JPopupMenu doesn't appear to work.
    Simple code:
    public static void main(String args[]){
    final JPopupMenu popup = new JPopupMenu();
    popup.add(new JMenuItem("first"));
    JMenu sub = new JMenu("sub");
    sub.add(new JMenuItem("next level"));
    popup.add(sub);
    popup.setVisible(true);
    The 'first' item does respond if you click it, but the sub menu will never open, nor will the first item respond to a mouse over.
    Any ideas? Help would be very much appreciated

    Yep, go back to what works, appears to be the only real solution. But then you'd hardly be able to use Firefox as nothing is going to get fixed there only get broken.
    What does not work is
    # move, and resize of main window not allowed
    # that include wiping out a lot of keyword shortcuts that do that
    # various additional collateral damage
    The solutions (work arounds) that I can best offer are clumsy but can be found in
    * http://kb.mozillazine.org/Resizing_oversize_window#JavaScript_no_longer_allowed_to_resize_windows

  • Canon Capt printer driver doesn't work under OSX Mavericks

    Since I upgraded to 10.9, my Canon i Sensys LBP 5050 doesn't print anymore. Installing the latest Capt driver (3.65) from the Canon website didn't solve the problem.
    Any thoughts?

    Same problem. Canon LBP5050.
    Did all things mensioned in this topic. No result.
    Статус:          Ожидание
      Принт-сервер:          Локальный
      Версия драйвера:          3.65
      По умолчанию:          Да
      Общий:          Нет
      URI:          cnbma://localhost:59687
      PPD:          Canon LBP5050 CAPT (UK)
      Версия PPD-файла:          3.65
      Версия PostScript:          (3010.000) 550
    (3010.000) 651
      Версия CUPS:          1.7.0 (cups-372)
      Поддержка сканирования:          Нет
      Команды принтера:          none
      Фильтры CUPS:
    capdftopdl:
      Путь:          /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
      Права доступа:          rwxr-xr-x
      Поддержка факса:          Нет
      Утилита принтера:          /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
      Версия Утилиты принтера:          3,65
      PDE:
    FinishingPDE.plugin:
      Соответствующий sandbox:          Да

  • WD Drive Utility (on WD Thunderbolt Studio) doesn't work after OSX update (10.8.5 or itunes 11.1 - not sure), any help?

    Hi There,
    I have just purchased WD Studio Thunderbolt and installed it on my Mac. The WD DRive Utility software worked fine until I have updated MAC OSX system (consolidated updates of 10.8.5, iTunes 11,1,0 and RAW didigtal cameras 4,09). After this Mac still can see the drive but the WD software cannot. Do you have any idea how to: 1) remove that update OR 2) install RAID using Disk Utility (wil this still work when WD launch update to WD Drive Utility?).
    Thanks in advance,
    Artur

    Hello,
    I too am having this issue with my Thunderbolt WD Velociraptor since 10.8.5.
    I have written to WD Support, I suggest you do the same my friend.
    This is the response so far....
    Thank you for contacting Western Digital Support. Your case is forwarded to our second level of support to check the issue in our laboratory. When I will receive respond form them I will contact you back as soon as possible.
    It may be up to APPLE to fix. I dont really mind who sorts it out as long as it is asap!
    Cheers,
    M

  • Audacity doesn't work in OSX 10.9.2

    Audacity was working fine and then without warning their is no sound except an initial popping.  I have reinstalled the software but that did not work.

    Having same problem as above
    OS X 10.9.2
    Audacity 2.0.5
    Apple preferences - sound - output - internal speakers, volume up
    Open aup project file, wave-forms show as before, play button gets ~1/2 sec of audio. PLAY again and get only click at start and stop
    INteresting - maybe related --- Initially on loading file get ~1/2 sec of audio. Afterward only click when press play. When I then go to Apple-Preferences - sound - sound effects, I get the same click when I change volume for alert or output volume. Second volume change and thereafter, gives chosen alert sound. Go back to Audacity, get ~1/2 sec of audio then silence as before.
    aup file originally captured from usb turntable on antique window OS but saved as aup project. Checked file dependencies and there are none - self contained.
    Ideas?

  • Passport doesn´t work with osx 10.6.8 after last update

    Hi,
    I have installed the last update of OS 10.3.1. Now I am not able to sync the passport with BBLink anymore. The passport ist not detected by the mac anymore.
    I am using Mac OSX 10.6.8 with BBLink 1.1.1.35 and it workt pretty fine so far. After i had installed the update and connected the passport to the Mac comes the message "... no drivers found ..." to the screen. It wants me to install BBBlend.
    After a reset to the original OS-Version it is still not possible to connect the passport with BBLink. The access to the SD-Card ist still working.
    Does anyone have an idea whats going on?
    Sascha

    Well so much for Backward Compatibility on BlackBerry and Apples part, they think we are all loaded with $$$ and can afford to buy a new computer every 4 years.
    That is why more people are not buying new phones or taking the updates because the updates break the compatibility.
    Looks like the only solution for you may be to buy a new computer, ⏏⏏⏏   I wonder if you had a iPhone if you would have the same issue, ⌘⌘⌘
    I wish I could have helped you more, I have a over expensive, crapple Apple, Mac Book Pro, Mavericks 10.9.5 with performance issues, I am not very happy also.

  • Safari doesn't work with OSX  10.4.6 updatae

    I've just updated my sytem to 10.4.6 and safari will now not work. Updates from Apple support say can't install this package needs 10.4.2
    I've tried others and they ask for older systems (Panther) versions.
    What can I do to restore my Safari browser.
    Alan

    Alan,
    Perhaps a simpler solution can be provided if you explain in greater detail, what "will not now work."
    Post a recent crash log if necessary.
    ;~)

Maybe you are looking for