Free of cost sale in Manufacturing
Hi,
We have one manufacturing plant, as when we create the invoice the customer account is debited and the excis etax account are creadited now in case of free of cost sale we required that insted of customer we have a different GL account the total invocie amount of inovice should be debited to that GL account insted of customer and the tax account should be credited as per regular process, so what setting cam be done to this, but SO, delivery and billing shold be done on customer name only.
regards,
zafar
Hello
Your most of the requirement should get solved by use of Item Cat TANN.
I hope the following SDN thread will be a good referenc for your requirement.
- free goods Accounting
- Excise in free goods sale
Regards
JP
Similar Messages
-
Free of Cost sales error during billing
Dear all,
i am facing the problem while doing Free of Cost sales , i have created a seperate document order type for FOC with the sd document category as "C" and and doc prcing porcedure as "C" . and in billing document i have also included doc prcing procedure as "C" .
My problem is when i create the sales order and when doing delviery there is no problem.. but when i created a delivery related billing
*the first error i am getting is document no XXXXXX ( error in account determination ) but when i went to VF 02 and put the billing document number to check account determination analysis .*
*i am getting this second error " billing document XXXXXX does not exist"*
*Message no. VF041*
*Diagnosis*
*The billing document you specified does not exist.*
*This document was possibly archived.*
but when i went i checked in the table level it is the corresponding billing document number is showing in the table
when i check the document flow of the order i am not getting the order number also to see the document flow for it
wht could be the reason
i am confused.
my senario is foc sales should be done the customer should not be debited but excise entry has to be made for it.
please give ur valuable inputs
Edited by: k.kumi on Aug 8, 2010 7:06 AM
Edited by: k. on Aug 8, 2010 7:40 AMThanks for your reply
your absolutely right, i have used FD document type and i have created a proforma invoice so that i can have a excise posting done for the particular materials , because since it should excised .
i have a billing type with SD document category as "U" for proforma invoice .
here everything is happening like sales order is created , PGI is happening and when it comes to delivery related billing
The system cannot able to able to save the data during billing.
the system is saying an error "billing document XXXX does not exist"
since i am creating a proforma invoice atleast i need to have the billing document number generated to do the exicse posting
Is it related to number ranges problem ?
Kindly reply me , waiting for your reply in anticipation
thanks -
COGS determination for Free of cost sales order
Hi All,
We have an issue regarding the COGS determination for Free of cost sales order. We created a free of cost sales order. But i need to know whether this sales order items will hit to COGS or not? If so how do i check whetehr its has been charged to COGS or not? and we have an issue raised saying thst one material in this sales order has not being charged to COGS. So please help me to solve this issue. Ihave checked the account assignment in GBB-VAX. And is there anyting to do with the settlement profile for COGS determination?.
Thanks and regards
UdayHi,
During PGI a material document and accounting doc gets created which would hit COGS account.
You're talking about one specific sales order in which for one material it didn't hit COGS account or any order you're creating now with that material has an issue? If its a specific material which has an issue always..then something is wrong with that material master setup. Also you can go to the reported Sales order--doc flow to the PGI document and check the accounting doc and if its not posted..check the analysis why its not posted?
And if its one off then I would suggest 2 options:
1) Reverse the goods movement, cancel the delivery or if billing has already been done..cancel the billing as well. And re-do the cycle. This always ensures correct posting.--> Recommended option.
2) Manual adjustment in FI.
And settlement profile is Controlling concept..not sure you would get any help on this in this forum.
Regards
RS -
How does a company account for the Costs of the Free samples been given to the customer.
Free of charge sales order will have no biling effect but how is the costs been taken care in acounting/costing perspective.
Thanks!
A SFyi,
If its regular sales or free of charge sales, Outbound delivery has to create to dispatch the goods to the customer. While issuing goods via OBD with Mov type:601, cost will be captured through accounting documents.
can you confirm, whether you want to capture the cost or price in FOC sales??
Assume, that we capture the price in G/L accounts after releasing Invoice to accounting, not the Cost. If you want to track FOC sales, you can very well use the std reports:VA05N with document type specific. -
Sales Commision / Free of Cost Sales Report
Dear Experts,
Is there any standard report in SAP to get the details of all sales created under "Sales Commision" / "Free of Charge" sales order.
Sold Party - Quantity - etc
ThanksDear Simon John,
There is no such standard report.
Either you can use VA05 and select ALL ORDERS and then FILTER it based on your document type for FOC .
Or else you can create a QUERY with VBAK-VBAP table join.
Thanks & Regards,
Hegal K Charles -
Sales Quotation - Items free of cost
Hi,
In my sales transaction I am giving some items as free of cost. These items are inventory items. The price of this free item should be displayed but at the same time it should not be added in final total.
How to do this?
udayHi Uday,
Are you using any excise tax code for this free of cost sales? If not then you can use Assessable Value field to show the unit price.
Last option will be to create one UDF.
Hope this will help you.
Regards,
Abhishek
Edited by: Abhishek A on Dec 4, 2008 3:32 PM -
Free of cost item sale.
Hi all,
It is a my claint urjent requirement free of cost item sales where we will define that, what is the order type, how i have to explain them any body plz give me some help .
Thanks in advance for your support and help.hi,
am not sure if understood your requirement. But anyways, we have sales document type FD which allows free of charge deliveries.
You can uses a free of charge delivery to send materials free of charge to your customer.
Process Flow
The system cannot create a delivery without a sales document, so you have to create a free of charge delivery as a type of sales document.
You create a sales document with the order type for free of charge deliveries.
In Customizing you can block the free of charge delivery from being delivered. Go to Sales > Sales Documents > Sales document header > Define sales document types, and select the Delivery block field in the Shipping section.
For free of charge deliveries, you can do one of the following:
Approve it by deleting the delivery block.
reject it by entering a reason for rejection.
Pl clarify if this what you are looking for.
Thanks,
Sadhu Kishore -
Problem regarding Purchase Order with Free of Cost Material
Dear Xperts,
I am facing problems while doing Goods Receipt of a Purchase Order having all the materials we are going to receive Free of Cost from the Vendor.
This case is happening with Doemstic and as well as Importer Vendors also.
Problems to be solved:
1. If we are using Tax Code(with excise conditions) ,excise duty calculation does not take pace automatically at Goods Receipt as the Material Value is Zero on which the duties will be calculated for a Manufactuing Plant.
2. This case seems very problammatic if that Purchase Order is having almost thousand line items.The user has to enter all the Excise duties manually for each & every line item during Goods receipt in a manufacturing Plant.
3. In case of Importer Purchase Order also, the CVD portion & CESS on CVD portion user has to enter manually.
4. To solve this problem we are not using Free Goods Indicator in PO, we are entering 0.01 paisa , but during the MIRO of Planned Delivery Costs , the system is not showing or providing POP-ups of those relevant condition types to the user to enter the actual amount.
Please advice, how can we proceed in this case.
Regards,
SoumickFirst you are putting 0.01 value . So the planned delivery cost is not showing coz if say tax is 8% then 0.01 x 0.08 will be 0.0008. It will take first two digit after decimal and hence its 0.00 and hence plannded delivery cost is not showing.
If you put 0.5 you will be able to put planned delivery cost in MIRO
Now regarding value is zero and how will the import duty be calculated. May be make a pricing routine where in the custom duty is not calculated on this base price 0.5 or 0.01 but on the actual value if it was not free of cost and that value you can maintain through MEK1 transaction code.
And while posting MIRO or MIGO you need to identify that these are free of cost material and use BADI fi_ac_document
and may be replace the actual GL with some other GL so that 0.5 or 0.01 does not add to your inventory cost and you could knock off later.
Regards
Sangeeta
Edited by: Sangeeta Khurana on Feb 6, 2012 1:37 PM -
Free Goods Without Sales Order
Dear Gents
We have a scenario where goods are issued for free without a sales order,it's not considered sales,they just give some materials out from the stock as gifts&issue it on a cost center , there is no sales order,invoice,etc..is it normal then that the accounting entry passed would be Dr Cost Of Goods Sold Cr Inventory or what should be the correct scenario , Thanks.Dear Expert,
When Goods are Given as gifts or Samples it becomes an expense for the company. So in my view it has to be shown as an expense.
The Accounting Entry would be :
Advertising A/c ....Dr
To Purchases A/c ....Cr
Regards,
Shankar K B -
COST OF GOODS MANUFACTURED IN COPA - MARGINAL COSTING?
Dear members,
I need to confirm the following:
COPA provides profitability based on Cost of Sales and not Cost of Goods Manufactured (COGM) for the period.
I need to confirm if this is possible in a COPA report:
SALE as per Billing
COGS:
Material Costs (as per costing key settings in COPA) relevant to sales
Activity Costs:
Labor (cost for the period)
Overheads (cost for the period)
For activity cost if I take the data available from the value fields, it will be relevant to Cost of Sales and and not COGM.
Firstly is it possible to call up cost elements and cost centers in COPA report painter (costing based COPA)? If I can, I take this cost as posted in cost element (primary) and cost center (for my overheads and labor costs) then it provides me cost for the period. But will it show me that cost by SKU (Finished Material)?
If the above is not possible please suggest how can I get Marginal Costing in COPA?
Regards.
MAKHello MAK,
Right, you can use both form of reporting simultaniously. No consequenses, but every time ou need to change the type in KEBC.
But while getting requirement from client you need to make sure which type suites the most. This will yield better report.
To achive Marginal costs results you can go for the Costing based report. becase you need to analyse the pattern of change of total cost over period of time.
Ex: Period 01 Period 02 Period 03 P............................
Total revenue:
-Total Cost :
Contrbution Margin:
Hope this helps
Regards
Ajith -
Report for the cost for replacing the defective goods free of cost
hi guru's,
iam having the qury that iwant to create a report for the free of cost .For the senario that company wants the report for replacing the defective goods free of cost .pls help me out .IN SD module
Edited by: joe mm on May 13, 2008 3:35 PMDear joe
I am sure, for giving free of cost, you should be having different document types like sale order for free goods, billing with no value. So thru VF05, by selecting the billing document type, you can generate a report.
thanks
G. Lakshmipathi -
To replace defective goods free of cost if it is brought back
Hi all
can any one suggest me how to go about this scenario
how to replace defective goods free of cost if it is brought back within 6 months of the invoice date.
what is the process
thanks in advance
sriHi,
To replace defective goods a return process with a free of charge SO and delivery must be in place.
Process:
1. Create a returns sales order w.r.t the billing document of the defective goods
2. Create a returns delivery and do the PGR
3. Create a Sales Order (new order type or OR can be used) with the replacement qty, please note that the pricing here should be zero.
4. Do the delivery for this order and PGI.
5. Please note that billing is not required as we giving the goods free of charge.
In order to do the above process all the configurations should be in place. The returns SO item category should not be relevant for billing, similarly the subsequent SO item category should not be relevant for billing.
Hope this helps.
Regards,
Vinu -
Returns of Promo material & Free of cost
Actually we are a pharmacuetical company and we have business scenarios that we give our marketing team promotional material which are free of cost and based on zero value means we maintain their stock in quantities only and also at the time of order processing we donot generate the invoices for such types of orders (due to zero value of order) because the items are already charged of to different departments .
some times it happens that we need to take back those items from our marketing team in the shape of return order, so my question is that what SAP best practices says about processing return order for such materials, how can i configure my system to process return cycle for those item.
kindly guruus help me outHi,
process the return sales order (RE) with reference to FD (your free sales order), becasue u didnt have billing document reference (this is actually sap standard, taking billing document is not sap standard). You definitely have perfect copy controls between OR to RE. then make sure item category determination settings like below;
REnormfree+nil=RENN
and then take PGR.
this is as per me is the best practice, which is purely SAP standard.
regards,
sk -
Transfer of Free of cost unit at 10% markup to Main product
Dear Gurus,
we are consumer products industry and offer bundle scheme i.e. one unit free on the purcahse of one unit.Let assume our main unit is LCD TV and free of cost unit is BD player. both units have common Division and common profit enter. we offer that on purchase of LCD (Sale Price PKR. 100,000) BD Player (COst price PKR 10,000) is free
now managment wants that when they execute profitiblity report of LCD it should show following figures
Sales Price of LCD PKR 100,000
Less COst +10% transfer price of BD player 11,000
Net Sales Revenue of LCD TV 89,000
while as we see profitibility of BD player it should show followings
COst Price of BD player PKR 11,000
10% profit margin(Mark up) PKR 1,000
Totale Sales Figure PKR 12,000
While At present following figures are being derived i.e.
Sales Price of LCD PKR 100,000
and net result of BD players is NIL
Requirement
Transcational Procedure `to transfer BD player COst price +10% to LCD and how to get above desired figures which are realistic
BR
SajidaHi,
The copy control setting can be made through VTFL
But not sure about percentage of margin, it will transfer hole cost of free item to main item
For your requirement in pricing procedure create two conditions for represnting cost
Say
PR00 - is for basic price - 100000
VPRS - Cost - 10000
VPRM - Margin Cost - 1000
Profit will be 89000
Now to bring the 10 % cost from free item to main item you have to write routine and assign in pricing procedure aginst VPRM condition
kapil -
Question regarding free of cost order
scenario: i have a client who wants to send 100 qty of good A free of cost to a customer. the customer is only responsible for taxes on this order. how would i do this in SAP? what do i need to create?
thanks!Else,
you can create your own pricing procedure & use the new sales doc type (DPP).
10 0 ZPRI - Basic Price - Statistical
50 0 MWST - 10(ZPRI) - MWS
so that, Basic Price will not be included for net value calculation, but taxes will be calclulated on basic price.
try n revert
NOTE: Make sure, in Incompletion procedure either @ header or Item level, Net value should not be included. otherwise system asks to maintain the price. As maintained price will not be considered in Net value as its Statistical.
so its recommended to maintain seperate Document type / Item category for all these kind of scenarios.
Edited by: Reazuddin MD on Oct 20, 2009 3:04 PM
Maybe you are looking for
-
Album not available on the iTunes store in my country ?
Hello, I'm new here, I happened to have my problem from Tuesday I can not buy an album to get leads me to the Store of Mexico, and click on the button to buy me a message This product is not available in Argentine Store, and contact technical support
-
ThinkPad T540p Windows 8.1 BSOD Intel HD 4600 Graphics?
When attempting to play video, user encounters a BSOD with the error mentioning the file "lgdkmd64.sys". This file is tied into the Intel Graphics Driver files. I have used the Lenovo support site to reload the driver file set for the laptop, and t
-
activation server is down and i cant do it through itunes because my sim is locked, i cant unlock it because i cant get to the screen that lets me enter my pin
-
Hello, I'm new to NetWeaver BMP and in SAP in general. I've downloaded and installed the following Trial Version: [SAP NetWeaver Composition Environment 7.2 Trial Version|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/a0a6bd7b-3dfc-2c10-e
-
Is exp dmp file from 10g database compatible with 9i database. In the other words Is export from 10g database using 10g exp command be impoted in 9i database using 9i exp command. Thx