Freeze a scene?

This is my first shot at using "Play" and "Replay" buttons in
Flash that are commonly seen online. I can get the button
ActionScript to work, but I don't know how to make Flash
permanently remain on the scene with the button until the user
clicks on it. I can stretch the amount of time Flash remains on
that scene by adding more frames, but I can't make it last forever.
What ActionScript do I need?

You may need to add a loop at the end of the scene sending
flash back to the beginning of it. Do not refer to the scene name,
give the first frame a label and when you reach the final frame in
the scene send the timeline back to the first frame of the scene
(calling on the label name).
example: scene 2 frame 1 - label name "beg-scn-1"
at the end of the scene put in a keyframe with this code:
gotoAndPlay("beg-scn-1");
This will loop the scene until the user clicks a button with
code directing the movie to jump to another spot.

Similar Messages

How to freeze a scene push it to left and make another scene appear at the side when doing a split s

Hello everyone,
I am new to the editing world. I am just trying out various options in Adobe premier pro cs 5.5. Here is the scenario.
I have four videos. I am able to do a splitscreen using scaling in the effects control. I am also able to crop the black bars using the crop tool. I did those, placed all the four videos one above the other in the timeline, and made all the four to appear onscreen in the form of a grid with two videos aat the tp and two videos at the bottom.
What I don't know
When a video is playing in full screen i need that video to be paused and pushed to the left. then the next video should start playing in the size of the remaing screen and it should then be pushed to the left. This should end after the fourth video ends. See the video below to get and idea of what I want.
http://www.youtube.com/watch?v=QEAPi0Ht2eU
Please send me a tutorial or video or guideline or anything that would help.
Thanks,
VJ

No tutorial or video, but experiment with motion/position, keyframes and freeze frame.
Look at https://vimeo.com/1954849 to see what you can do with position, crop, keyframes, etc.

Scene selection freezes burned dvd

Hello,
I recently burned an iDVD project that was about an hour long. The finished burned dvd plays on a dvd player when I press play from the menu. However, when I try to go to the scene selection sub menu I created, it will not work. In fact, when I try to go to a specific scene, the whole dvd freezes up in the dvd player. Any ideas on how to try burning the iDVD project so that the finished product has a working scene selection? Thanks as always.

Hi
+If I was unable to produce a successful disc image with a working scene selection (the freezing happened when I played the image too), does that mean I have a bigger issue than just Memorex vs. Verbatim? I have a feeling that even if I buy the Verbatim, the scene selection will freeze because it froze on the disc image anyway.+
YES. If the DiskImage don't work. Don't burn it onto DVDs.
The problem is in the process to make the DVD in iDVD.
eg using .avi movie files, .mp3 sound etc.
a. secure a minimum of 25Gb free space on internal (start-up) hard disk
(other ones of no importance)
b. Versions of Mac OS, iDVD and QuickTime (important) up to date
c. Material to build DVD from only.
• streamingDV (video+audio)
• .aiff (audio eg from audio-CDs)
• .jpg (photos - I use this)
Nothing else - convert it to match
d. START a new iDVD project and make Your DVD-design and then a DiskImage
e. Test this with Apple DVD-player
Does it work - burn it with either
• iDVD
• Disk Util tool (set down speed)
(• Roxio Toast™ (set down speed))
Yours Bengt W

I am using imovie 09 and when I try to play the scenes from my hd camcorder video freezes then voice freezes and bar keeps running to the end. Does anyone know how to fix this? PLEASE!

I am using imovie 09 and when I try to play the scenes from my hd camcorder the video freezes then audio freezes and the play bar keeps going with no video or audio. How Can I fix this??? PLEASE HELP!

Up front I would say the short answer is "no"... but the long answer is "sort of".
Replicators are part of the Fractal "arsenal" and Motion definitely has those, but I think you would be very hard pressed to come anywhere near the type of fractal imaging as in the Electric Sheep example.
I was able to squeeze the following out of Motion (the base element is a simple square), but by the time it got this far, Motion wouldn't play faster than about 1 frame every 5 or so seconds. At a certain point, you end up having to render movie files in order to see it in action (and that took Motion about 8 minutes for a 12 second project [09 iMac i7].) [If you're interested, I posted a short video of these here: http://www.youtube.com/watch?v=l6Fe_ydfAss. The segments are longer than 12 seconds each because these are designed to loop @12 seconds and each one was looped more than once.]
[You asked the question on the 4th - I "finished" this on the 7th... (I admit to several "false starts")]
If you have a faster mac than mine, you might be able to do more than this... and you really don't have access to the Maths that fractal apps have, so depending on your creativity for devising the "root" motif element you may (or may not) be disappointed in what Motion has to offer (it *will* try your patience!) If you would like to experiment anyway, I will explain some of the techniques I used for the above (which are, at best, rudimentary!) Once you get the basics down, you should be able to take off in your own directions.
HTH

Freezing scenes in transition

Frames are freezing during transition from one scene to another. It freezes for several scenes then starts again. Any advice on how to fix

iMovie builds it's cache files very quickly, so one of the first troubleshooting steps I would advise, is quitting iMovie, and restarting the computer.   They refreshes your computer cache files, as well as iMovie cache files. If the issue persists, do the following:
- quit iMovie
- click finder in the dock, so the word finder appears beside the apple. Also note in this top menue, is the word "Go", click the go and then hold down your option key on your keyboard. This will make a "library" appear under your home.   Select the library, then go to your preferences folder.
There, look for the following files, and drag them out to your desktop:
     - com.apple.iApps.plist
     - com.apple.iMovieAPP.plist
Go back one screen by clicking the backward arrow and select the "Caches folder", or go back to "Go" hold down your option key on your keyboard, and select the library, the folder entited "Caches"
There, look for the following files, and drag them out to your desktop:
     - com.apple.iMovieAPP
Launch iMovie and test it

Every time I add a light to a scene in After Effects the program freezes

This just started happening?? Please help
Every time I add a light to a scene in After Effects the program freezes

What is your After Effects version number? You said you're running "CS6", so the version number should start with 11. The latest version of CS6 is 11.0.4 - do you have that? (The latest version of AE is 13.2.0.49, in case anyone was wondering).
Do you have your comp set to standard renderer or ray-traced?
What are your computer specs?
Also, what Rick and Bogiesan asked.

When watching videos in my library, the sound cuts out and it freezes. After a few minutes, the audio returns but the scenes are choppy. Any help?

I have updated Itunes and quicktime and it still does this. I have taken my laptop to get checked, but it seems to be just iTunes that is messing up.

Hello there, smalltowngirl93.
The following Knowledge Base article offers up some great in-depth steps for troubleshooting audio not playing in iTunes or Quicktime:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

New iMac freezes?

I received my new 24" 2.8GHz iMac in early November w/4GB of Crucial memory, immediately repartitioned it, upgraded to Leopard, migrated my apps/accounts/data over from my 2.7GHz G5 Tower (which has been running Leopard perfectly), and ran Software Update to bring everything current.
This Mac has not experienced any obvious video artifacts, or freezes while processing intensive video activity, but it is heavily customized. Here's the details:
I've attached an Apple 23" Cinema HD Display for dual displays, a G-Tech 750GB FW800 drive for Time Machine, and a Kensington USB 2.0 powered hub to attach all my USB stuff (Harmon/Kardon SoundSticks, SanDisk memory card reader, extra Mighty Mouse, USB dock for iPhone, Canon LiDE 30 scanner, USB connection to APC Back-UPS RS 1500). I retired my old USB 1.1 hub, since I knew it would be problematic with the new system, as would be my old USB Serial Adapter.
From a software viewpoint, I have iWork '08, iLife '08, Adobe CS3 Suite, MS Office 2004 11.3.9, Indigo 2 (home automation control software), Meteorologist, and all the other usual Apple software. At login, I have Mail, Indigo 2, iTunes, iPhoto, iCal, Address Book, Meteorologist, and Activity Monitor startup, then share iTunes and iPhoto over the local network. I also share my data volume over the local network, as this new iMac is replacing our old Windows 2003 server as a home media/data repository.
To add to the mix, I'm also running SereneSaver Quicktime movies as Desktop backgrounds cycling every 5 minutes on both displays (although it only displays the first frame of the video on the secondary display). I was also running MacKiev's 3D Atlas Globe screen saver (displaying the latest satellite cloud cover) until I found it was locking up the new iMac in about 3 hours (with SereneSaver also running). Needless to say, this all ran perfectly on the old G5 Tower, even with its ancient ATI Radeon 9800 Pro (128MB) video card. And finally, in addition to the regular .Mac/iDisk updates, and the hourly Time Machine backups, and the quarter hour Meteorologist weather updates, and the every 5 minutes Mail updates, I was using Spaces to sort out all the windows that I wasn't hiding.
I knew I probably brought over some conflicting software, since this was a migration from a PPC Mac to an Intel iMac, so when things froze, I assumed it was a compatibility issue, and proceeded to start trashing obviously unnecessary stuff from the system/root/user libraries. I also assured everything that was running was current. Over a couple of days I thought I had pretty much found everything I could think of that might crash the new iMac (including old Symantec frameworks, MS Virtual PPC stuff, old auto startup Retrospect stuff, and the like). I tested all my apps, reran the Leopard 10.5.1 combo update, Repaired Permissions, Verified Disk (with Disk Utility), booted up from a Tiger 10.4.11 volume and checked the Leopard startup with DiskWarrior 4.0, and then ran Apple's Hardware Test from their iMac startup DVD. In the end, I was able to keep the new iMac up and running continuously performing its assigned chores for over 37 hours.
Then, yesterday afternoon in mid-post to one of these threads, my shiny new iMac froze up. No warnings of any kind. In mid-breath it simply stopped working. The blinking colon in the menu clock stopped, the Activity Monitor CPU history graph updating in the Dock stopping updating, neither mouse would move, pressing any combination of keys on the keyboard I could think of would not interrupt the iMac from its pause. So, I sucked it up and pressed the power button to restart.
Upon restart, I checked the Console logs, and of course, nothing untowards was identified there. Whatever froze up the iMac happened immediately. A close Apple contact of mine immediately suggested it sounded like a hardware issue. I didn't think so, but I took his advice anyway and reinstalled Leopard in a virgin partition on the internal hard drive, along with iWork '08, iLife '08, and all the latest Apple updates, again. I did not install Adobe CS3, since its installer disk doesn't finish properly in Leopard, and I didn't want to install Tiger first, then all it's updates, then CS3, then all its updates, then Leopard again. I just want to confirm, or not, that I'm having an obscure hardware issue.
Today I'm running the virgin installation (now 16 hours into the test) to see if I can crack the 37 hour barrier. If I make it to two full days, I'll be pretty confident that I must still be having software issues with my standard startup configuration. Of course, I'm not currently running any non-Apple software, and there's no legacy stuff on this startup partition, other than the music and photos I copied over from my data partition for sharing over the network at home. I'm also foregoing Indigo 2 controlling stuff around the house, and the great SereneSaver Quicktime movies playing soothing videos (beach scenes, peaceful lakes, mountain vistas, etc. with background sounds) as my Desktop background.
So, if this basic, virgin configuration locks up in the next day or so, my next step is to pull the Crucial 4GB of memory and put the standard Apple 2GB back in, and wait another couple of days. If that locks up, then it's a call to AppleCare. If not, then it's a call to Crucial to replace their memory modules.
My question is whether anyone else with a simpler configuration, and no obvious video issues (as confirmed by Software Update not offering the video firmware update), is experiencing any spontaneous freezes?
At this point, it's still premature to think I have a hardware issue, but if I do it should manifest itself with this basic, virgin installation.
More updates later...

I have been experiencing a Restart/Shut Down reliability issue with my new iMac and Leopard 10.5.1. This evening an Apple rep I know pointed me to a work-around in Apple Discussions:
http://discussions.apple.com/thread.jspa?messageID=5957261&#5957261
This thread notes the discovery by one user that iDisk automatic syncing is not working reliably, and is preventing consistent restarting/shutting down of your Mac. Although, syncing has been working reliably for me both for .Mac stuff, and the iDisk itself, if you do a Get Info on your iDisk it reports, at least for me, that its capacity is 1TB, with 466GB available. I have only the standard 10GB .Mac account, and only 5GB of that is allocated to my iDisk, so something is clearly amiss with the .Mac iDisk setup (iDisk Get Info reports correctly on my G5 Macs w/Leopard), as being reported from the .Mac server. If you check your Console logs, you may also see this recurring error message, which is reporting a syncing error, although my syncs have, as I've said, been working correctly:
11/25/07 9:11 PM FileSyncAgent192 MKCOL /.FileSync (FAILED), httpStatusCode:405, errorType:100, transactionState:5, txnId:3846B904-9ABB-40E5-9928-B9233FAC05D2, auto-retries=0, manual-retries=0
To summarize, if you turn off your iDisk in your System Preferences/.Mac/iDisk preference pane, you'll have no problems restarting/shutting down. You may also need to do the power management reset (turn off Mac, unplug all devices and power for 15 seconds, reconnect, and start up) and the parameter RAM reset (reboot while holding down the cmd-opt-P-R keys). You can do this in one restart cycle, if you like. After that, restarts/shutting down has worked perfectly for me.
Of course, I actually USE my iDisk, and will be leaving it on. But, at least I know now how to work around the restart/shut down issue. (Note: this morning my iMac running my full/standard configuration locked up, after the iDisk mounted/unmounted repeatedly during the evening, so I rebooted and switched iDisk syncing to manual. More to follow...)
I hope Apple adds this fix to their 10.5.2 update next month.
Note: This is such an important issue, that in addition to adding it to a reply in another Shut Down thread, I thought I'd post it as a separate topic here.

I bought a movie on itunes and it is fully downloaded. I tried playing it and it would play for a little bit and then freeze. I would then shut my computer down and start over. However, after the movie that was downloaded, I could only access the extras (

I bought a movie on itunes and it is fully downloaded. I tried playing it and after a few minutes, my computer would freeze. I then shut down my computer and tried to start over. However, all that I am able to play is the movie's extras (deleted scenes, backstage pass, etc). I need to know why this won't play because I paid $15 for the movie. Help

How to report an issue with Your iTunes Store purchase

ImporterProcessServer constantly freezing Premiere and Media Encoder

This is really bad. This project is due tomorrow and I need some help.
I have a MacBook Pro with 2 GB Ram and a 128 MB Nvidia graphics card. Not the newest model, but it's sure fast. Anyway, I have Adobe CS4 Master Collection installed and am working with a lot of AVCHD video in Premiere CS4. When I go to export using Adobe Media Encoder, it freezes at a certain point. I have tried looking in the Console logs and this turns up:
5/26/09 7:45:59 AM com.apple.launchd[96] ([0x0-0x1e21e2].com.adobe.MediaCore.ImporterProcessServer[11877]) Stray process with PGID equal to this dead job: PID 11878 PPID 1 PhotoshopServer
5/26/09 7:45:59 AM com.apple.launchd[96] ([0x0-0x1e21e2].com.adobe.MediaCore.ImporterProcessServer[11877]) Exited abnormally: Bus error
Does anyone know anything about this problem or how to resolve it? I am simply exporting 720p60 H.264 video with AAC+ Version 2 audio. Exporting in small chunks works, but some scenes export and some don't. It seems kind of random. The one with the least transitions/effects actually freezes. I can't export the main sequence at all because it freezes at a point that works when exporting the scene individually. I have to force quit BOTH the media encoder AND premiere when this happens. And it takes roughly 5 minutes to load all the media for the project when I reopen it as well.
This is a REALLY bizarre problem. I've seen some Google results for problems with the ImporterProcessServer on Windows, but only about one for Mac and it wasn't much help. I've tried trashing my preference files for Premiere and will try finding AME's preferences and trashing them, but I'm not sure that will do anything. Hopefully they get rid of this buggy ImporterProcessServer in Premiere 4.1. By the way, I am running 4.0.1 now.
This happens when I'm just working with Premiere too. It forces me to force quit the application because the video and audio won't play.
Any help would be really great.
Morgan

Morgan,
Maybe something in this THREAD will help. It was on a PC, so much might not apply in your case - or it might. The thread also rambles a bit, and you may have to weed out a bunch of stuff.
Hope that something helps you - good luck,
Hunt

FAQ: What is Auto-Analysis, or Why does Organizer freeze?

What is the Auto-Analyzer?
The Elements Organizer has the ability to scan your videos and look for certain characteristics that may help you choose what will work best for you projects in Premiere Elements. This Auto-Analysis runs in the background of your system, scanning the video files in your catalog and applying Smart Tags when it finds certain criteria have been met. There are over 50 Smart Tags that can be applied, including whether the footage is blurry, includes a zoom or pan, has people's faces, etc. Additionally, it will break up your video up into individual scenes. It will also check your image files for people’s faces so you can identify in which pictures your friends and family appear.
     Smart Tags
While Auto-Analysis can be very useful for digging through your footage and breaking it down into more digestible bits, video files can be very large. Thus the system resources needed to analyze some video files can cause the rest of your system to perform slowly. Additionally, poor compression or incompatible codecs within the video files can cause errors with the Auto-Analyzer.
How do I customize Auto-Analysis?
The Auto-Analyzer can have its behavior modified in the Organizer Preferences (Mac OS: Adobe Elements [Version] Organizer > Preferences, Windows: Edit > Preferences > Media Analysis). Pictured here:
     The Auto-Analysis Preferences
How do I turn off Auto-Analysis?
To completely disable the Auto-Analyzer, uncheck all of the options in the Media Analysis Preferences.
What if Elements Organizer is crashing or freezing?
If Auto-Analysis is really struggling with your files, it may cause the Elements Organizer to crash. And the crash may occur faster than you can get to the Preferences to disable it. In these cases, here are the steps you can follow to disable the Auto-Analyzer.
While Launching the Elements Organizer (click “Organize” on the Welcome Screen), hold down the Shift key.
NOTE: You have to perform this step quickly.
If you get the timing right, the Catalog Manager will appear before the Organizer opens. The Catalog Manager is the same dialog you see when you go to File > Catalog from within the Organizer.
In the Catalog Manager, click the New button. You may get a warning about your Backup/Synchronization settings. Just click OK.
Give the new catalog a name (it doesn’t matter what it is, just something you can identify later, such as “Test”). Click OK.
The Elements Organizer will launch with this new, blank catalog. But don’t worry, all of your files are still safe.
Go to the Media Analysis settings in Preferences and uncheck all options.
Go to File > Catalog and in the Catalog Manager, select your original catalog from the list (default name is “My Catalog”) and click Open.
     The Catalog Manager
If these steps do not address your Elements Organizer crashing or freezing issues, then you are dealing with a problem that doesn’t involve the Auto-Analyzer.
What if Auto-Analyzer is having trouble in Elements Organizer but I still would like to scan some files?
If you’ve had to disable Auto-Analysis because of some trouble with certain files, but you’d like Auto-Analyze other files, you can do so. Simply select the files you would like analyzed and go to Edit > Run Auto-Analyzer. This will just scan the files you have selected.
Why won’t Auto-Analysis work with my files?
As previously mentioned, Auto-Analysis may have issues with the way your video files have been compressed. Additionally, there is a file size limitation to what can be analyzed. The upper limit is about 4000 x 4000 pixels, or around 15.6 megapixels. While the Organizer will import much larger files and even generate thumbnails for them, the Auto-Analyzer will not read them. They will merely be skipped over. If you try to analyze a single file of such large size, you will be informed of this skipping due to potential errors.
     Media skipped warning message

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

IDVD 08 - problem with scene selection tabs not working after "burn"

I have a movie that is about an hour long (made in iMovie08 using mostly still photos). I wanted to have "chapters" -- but with that option gone, I used the Scene Selection option in iDVD08. This created menus with 15 scene selection buttons (I chose every 4 minutes). The menus were automatically created by iDVD and I did nothing to change them, except to type in scene info (two-three words).
The buttons all worked fine on the computer, and I burned a DVD. The DVD worked great in my VCR player. I'd select Play Movie and it would go. I'd select Scene Selection and I'd get the menus for that. But when I'd highlight one of the scene selections and "enter" (select) -- it wouldn't go to that scene. I could go back and forth between menus, and could move around and highlight the scene buttons, but selecting would not start the scene to play. The movie played fine from start to finish, and the other remote features worked (stop, pause, menu, etc.).
I went back to iDVD and chose a different theme (thinking maybe I'd inadvertently done something to mess things up. The only thing I did differently in addition to the new theme, was to add two small movie clips - and I rearranged the buttons on the menu (dragging) to get them positioned where I wanted them. So my first menu says "Play Movie". The second menu has: Play Movie, Scene Selections, Little Movie 1, Little Movie 2. Everything worked greated in iDVD. Then I created a disk image to view using DVD Player (rather than waste another DVD). Same problem -- only worse. This time I couldn't even highlight Scene Selection to get to the scenes' menus.
Any thoughts on why I'm not able to get the "Scene Selection" buttons to work after a burn? Am I missing a step somewhere in iDVD?
Thanks.

I am not sure, but does your post concerning the problem, that all Remote Control function will work properly within iDVD'08 but after burning the DVD absolutely not with the RC of your set top DVD player connected to your TV?
If this is it:
Meanwhile I could figure out - after many nights of not been very productive and only working out on all the iDVD'08 problems - that **ALL** of the *7.0 Themes* have a major problem in generally.
The following points are concerning iDVD'08 using any of the 7.0 Themes:
- Complete deep freeze of your Mac under Leopard when rendering/coding/burning a movie which has chapters and you use movies instead of still images in drop zones. (LeopardiDVD087.0Themes)
- Functions on remote control of your set top DVD player are not working correctly when making a movie with chapters. This is generally on Tiger and Leopard the same problem using iDVD08 with any of the 7.0 Themes.
Quick and dirty workaround:
You may avoid this if you simply use a 6.0 Theme or lower version of the Themes.
But this is of course not the clue...
It is VERY DISAPPOINTING, having software at such a low quality level deliverd by Apple. And somehow it looks like they DO NOTHING against it. No statement, no excuse, they really remain silent.
This may also be a thread you could be interested in:
http://discussions.apple.com/thread.jspa?threadID=1203323
Cheers,
Roland

Large photos freeze flash player, example file included.

This was working with Flash 10, but 10.1 kills it I am not sure if its the server or client side that makes it freeze.
File is located at
http://laceybrowne.com/broke.fla
Thanks!
also posting the code at the bottom for people who can't download
import flash.display.BitmapData
stop();
var aScene:Array = []
var aSceneWidth:Array = []
var aSceneHeight:Array = []
nCanvasWidth = Stage.width-50
nCanvasHeight = Stage.height
nCanvasRatio = nCanvasWidth / nCanvasHeight;
aScene[0] = this.createEmptyMovieClip('scene', 1);
var oLoader:MovieClipLoader = new MovieClipLoader()
oLoader.addListener(this); //use the main timeline to listen and respond to oLoader's broadcast events
//sScenePath = "http://laceybrowne.com/8702373.jpg"//works
sScenePath = "http://laceybrowne.com/8964867.jpg"//doesn't work, freezes everything in flash player 10.1
oLoader.loadClip(sScenePath, aScene[0])
function onLoadInit(_mc:MovieClip)
     _mc.forceSmoothing = true;
     _mc._quality = "BEST";
     if(_mc._name == "scene")
               // transfer image to bitmap object
               aScene[0]._x = 0
               aScene[0]._y = 0
               aSceneWidth[0] = _mc._width
               aSceneHeight[0] = _mc._height
     else
          _mc._height = 50;
          _mc._width = 50;
function setSceneSizes(i)
     var nWidth = aSceneWidth[i];
     var nHeight = aSceneHeight[i];
     if(nWidth/nHeight < nCanvasRatio)
          var nStartWidth = nCanvasWidth;
          var nStartHeight = (nHeight / nWidth) * nCanvasWidth;
     else
          var nStartWidth = (nWidth / nHeight) * nCanvasHeight;
          var nStartHeight = nCanvasHeight;
     aScene[0]._width = nStartWidth;
     aScene[0]._height = nStartHeight;

haha yes we did, but it broke as soon as I went to 10.1!
The .draw command was killing big pictures once i went to 10, then i removed the draw commands and just worked with the loaded MC, and it worked, then i updated to 10.1 and it doesn't work now... driving me nuts.
and not 100% sure what you mean by not accessing the data, I have to change its width/height/x/y once it comes in.

Blu-Ray disc freezes for half a second between chapters

I'm brand new to using Adobe for video editing. I just finished my first Encore CS6 project, it's been quite a learning experience. I have a 40 minute video with 18 chapters that I edited in Premiere Pro and exported for Blu-Ray as a single sequence. Encore still insisted on transcoding it, it was irritating to have to wait but it worked. I created a simple blu-ray menu with a chapter index with 10 items per page created from a chapter playlist. The first play is the first page of the menu, and each chapter plays sequentially. There are no end actions on any of the chapters, they are intended to play sequentially starting from any chapter selected in the menu. Encore said I have an oprhan timeline, but I don't see how, since it's my only time line and each chapter points to it.
I built a Blu-Ray disc and it works great except for a half a second freeze in audio and video as it plays through each chapter point. I built a DVD from the same project and it does not have this issue but its video is jerky during movement such as a scene where I'm panning the camera to follow an actor.
The export settings from permiere were:
1920x1080, 29.97 fps, upper
VBR, 2 pass, Target 25.00 Mbps, Max 30.00 Mbps
PCM, 48 kHz, Stereo
I found several threads that seemed to be similar to these issues going all the way back to Encore CS4, but I haven't found any solutions.
So to sumarize:
I have four issues in order of importance:
1. Blu-Ray freezing briefly as it plays through chapter points
2. DVD has jerky video in higher motion scenes
3. Transcoding what should already be Blu-Ray ready video
4. Orphaned timeline that doesn't seem to affect anything
Any suggestions?

I wanted to test a possible issue with the freezes, but never got to it. Sorry you did not get any responses.
The bluray should not freeze as you go through chapter points on a timeline. The fact that the timeline is an orphan is curious. You might post a screenshot of your flowchart.
What version of Premeire are you using to create the exported files?

Maximum Scenes/ Frames?

Hi
I have created a long flash FLV. My settings are as follows 29 FPS as its displaying on a HD TV and its about 22 min long. I have 32 Scenes though each scene isnt that long, i link my longest scene is 2200 frames long. I export at maximum quality as a SWF and an EXE.
Heres the problem. When i play it back (both the SWF and EXE do this in the same place) it just freezes after about 8min in the same place each time (playing it back in flash player 8). I deleted the scene (21) where it froze to see if that helped but is then stopped in the middle of scene 22. Is there a maximum number of scenes/frames which can be played back? the publushed file is about 55MB.
What should i do?
PC spec
Intel Core Duo
2.2Ghz
2GB RAM
80 GB free space HD
Flash player 8

Hiya
No, i'm not streaming.
I pubish the file onto my desktop and play the SWF or EXE directly from there.
Where are the publish settings to set it to steaming? i wonder if that will make a difference?

Freeze a scene?

Similar Messages

Maybe you are looking for