Freeze during 10.4 archive and install

Hi. I'm doing an Archive and Install on my PBG4 and the installation was going fine until I put in the second disk (as requested) and it is now hung-up on "Installing GarageBand Application." It has been for about 30 minutes - "Writing files: 8% complete". Does anyone have any advice? I think I need to bailout of the install but I'm concerned about doing that. I DO have a complete back-up. Any advice is greatly appreciated. Thanks.

Welcome to the forums!
Should you need full service help, you can start a New Topic here...
http://discussions.apple.com/forum.jspa?forumID=752&start=0
That being said, nobody can say for certain, only guess, and +most of the time+ you won't lose everything by Force Quitting, but it CAN happen, and since it already is having problems, it means you had Disk Problems before you started.
Try to get #1 DiskWarrior the CD, second get an external Firewire Drive for backups.

Similar Messages

Archive And Install: any way to preserve settings??

Hey there, so as I've been posting on these forums, been having some problems with my computer freezing after I upgraded it to Tiger. Although it certainly wasn't crash-proof beforehand--although I used the program Rember and that suggested that the RAM was okay, that wouldn't necessarily tell me if the RAM was compatible--and I Verified and Repaired permissions for everything beforehand, the incidences have been increasing. It even froze when Software Upgrade was installing the 10.4.11 package! So, someone here suggested that I try again, using Archive And Install.
If you have any suggestions on whether this is a good plan, let me know. I'm certainly ready to try it, but one of the things I liked about the basic upgrade is that it kept all my user settings from the previous OS--my other 3rd party applications, my personal files, my bookmarks, etc. Although I DID clone the previous boot partition to my external drive (using Carbon Copy Cloner), I haven't necessarily even looked at the clone since I reinstalled.
Granted, if I can simply copy and paste all of those files, applications, and import those bookmarks from the old drive, then I'm not as worried. It's not like I upgrade my OS system very often, and just don't know that much about how Archive and Install differs.
So, I want to know EXACTLY what's at risk, what I'd need to back up & reinstall (and if doing so could potentially eliminate any problems that could've incurred from the computer freezing during that Tiger Package upgrade).
Thank you!

How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.
The option to preserve users and network preferences will move your user folder from the previous system to the newly installed system. It will move your network preferences only from the /Library/SystemConfiguration/ folder. It will move your third-party applications. It will NOT move any application support folders located in /Library/Applications Support/ nor any third-party preferences located in the /Library/Preferences/ folder nor any third-party software folders installed in the /Library/ folder.
I would clone your existing system before doing the Archive and Install as a precaution. Repair the hard drive and permissions beforehand and test the clone afterwards to be sure it boots the computer.

Archive and Install/Disc Utility issues -

I'm currently spending a summer abroad in South America, and have had issues with my Macbook Pro (early 2011 version) no longer starting up after some virus experiences last week. The computer hangs itself during loading on the white screen w/ grey apple and the spinning dial. In contacts with Apple Care as well as some Mac-saavy friends, the following situations have been tried:
Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself.
Opening in single user mode - I run the recommended sbin/fsck -fy command to clean up the hard drive. It comes back after having checked 6-7 parts, saying that the MacHD is in good shape, with a message following saying that something had been "modified" (forgive me for not remembering the correct verbage at present). I then run the same command again, resulting in a message that the HD is clean and without error. I then "reboot" and remain hung on the white screen w/ grey apple.
Opening in verbose mode - I reach the following lines of text, and then there is no further progress:
enable
IONetworkController::enable
createMediumTables
enable end
MacAuthEvent en0   Auth result for: 00:23:cd:1e:f2:c4 No Ack
same line as above saying "Auth timed out" at the end
Command+option+r+p - shock two or three times, (three startup chimes) and computer continues to hang itself in the normal spot.
- So, at this point I took the advice of Apple Care and a few other friends, and tracked down a "retail copy" of Mac OSX (10.6.3) in order to try to do an Archive and Install or any sort of Disc Utility via the startup disc.
Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen.
Holding "option" during the startup gives me the option of loading from the HD, or the disc. Selecting the disc proceeds to whirr the cd drive, take me to the white loading screen with the grey apple, and... you guessed it... leaves the CPU hung.
My question is then, is my Macbook Pro unable to read this disc and execute Archive and Install/Disc Utility for hardware reasons as per the virus attack, or is the disc not compatible with my version of OSX (which I have since confirmed through my wife to be 10.6.6)?
Different sources have told me different things. The local AASP in Uruguay sold me what they professed to be the "latest" version of OSX - the 10.6.3, what's more for $55 dollars instead of the lower cost as available in the states (between $15-$30), so I am reluctant to go back to them for advice when they seem more inclined to cash in on my inexperience (Mac owner of less than a month) than actually fixing my issue. Apple Care told me that a standard "retail disc" should work, but I am assuming now that they believe I can snag the same version as initially came with my Macbook Pro. Should I be looking to have my wife mail my original OSX install DVDs down here to resolve this problem? Should 10.6.3-retail be working and is not for reasons I haven't identified? I have since done some online research and found mentions that doing any sort of HD partitioning or OSX reinstalls can only be accomplished by utilizing a disc of an equal or more recent version of the OSX (examples that 10.4 can't work on a notebook preinstalled with 10.5, etc). Does this translate to 10.6.3 not being able to function for my 10.6.6 MBP?
Any insight or thoughts would be much appreciated, as essentially all of my schoolwork and assignments are now trapped on an inaccessible HD. Thank you for your time.
- Joseph

I tried adding in a bunch of information about what your troubleshooting steps meant, but the server went into maintenance while I did. So, here it is again:
"Opening in safe mode - The loading bar (added at the bottom of the grey apple screen) loads about 1/4 of the way, disappears, and the computer hangs itself."
     This is FSCK running, and gives you an indication of it's progress.
"MacAuthEvent en0   Auth result for: 00:23:cd:1e:f2:c4 No Ack"
     This is either a failed DHCP request or ARP request.
"Command+option+r+p"
     Command+Option+P+R - Resets PRAM. That's why p+r.
"Inserting the disc and holding "c" at startup results in the cd drive whirring the disc for a few moments, and then remaining hung at the same white loading screen."
     This problem indicates that the disc is too old to boot your system. The reason for why this disc cannot boot is because it doesn't contain the necessary drivers for your model MacBook Pro. My mom and brother have similar models, and my brother had similar issues while in Japan. He went and got an install disc as well, which failed, I ended up stepping him through so that it would boot in Safe Mode, and then got it working in Normal Mode remotely.
FYI: Sophos has a free Mac Antivirus program, that is very processing friendly, and will scan in the background. You may wish to consider it as an alternative to Avast! if it continues giving you problems. Though I suspect it may be coincidence that your computer had problems shortly after Avast! cleaned up files. Let me know how it goes. You may wish to open up Disk Utility and check your S.M.A.R.T. Status. You want to make sure it says "Verified" If it doesn't say "Verified" then you have a problem.
-Phill

Can I partition my HD when I Archive and Install the OS?

I may need to perform an Archive and Install of OS X 10.6 due to some glitches, and this was recommended by an Apple tech support. If I do go through with this (hassle), does anyone know whether it is possible, to choose at that time to create a 2nd partition on my HD? I have a new MacBook Pro and during the installation/migration process of retrieving my data and transferring it from a backup HD to the new computer, I did not have an opportunity to create a 2nd (or more) partition. Anyone know if this is possible when doing an Archive & Install without a lot of hassle?
Thanks!

Tara Hollander wrote:
I may need to perform an Archive and Install of OS X 10.6 due to some glitches, and this was recommended by an Apple tech support.
If you understood Apple's support people correctly, they seem to be a bit confused. Snow Leopard doesn't have an "Archive and Install" option. It has an upgrade install method. You can also launch Disk Utility early in the installation process to do the equivalent of an "Erase and Install" method.
If I do go through with this (hassle), does anyone know whether it is possible, to choose at that time to create a 2nd partition on my HD?
As soon as the installation process shows you a "Utility" menu, open Disk Utility and use it to partition the computer's disk. After the installation, copy your data from the backup drive.

Where to find after "Archive and Install"

Hi everyone. I recently installed Leopard onto my Macbook. During the process, I used the archive and install feature to save all of my old data and files. Right now everything is located in the "Previous System" folder on my hard drive. I am trying to find my iCal information, but don't know where it's located. Does anyone know?
I didn't backup any of my calendars. I didn't think I would have to since all the information should already be saved.

aimili,
If you actually accomplished an Archive and Install, you should be able to open iCal and the previous calendar information will populate your upgraded iCal. What calendar information is displayed in iCal when you open the application?
If your old calendars are not displayed you should be able to find your previous information in folders named something like 4A1DC586-14EC-4D42-B659-BEBA31968385.calendar in the Users/yourusername/Library/Application Support/iCal/Sources Folder of your previous system folder. There will be as many of these folders as you had calendars on the previous system, but they will have different alpha numeric names on your computer than the example which I just gave you.
Open these oddly named folders and you will find the corestorage.ics files containing your former calendars.
Use iCal to import the corestorage files by using the iCal>File>Import... menu command to navigate to and import the appropriate corestorage.ics file for each of your calendars.
Did you ever use .Mac? If so, you may also have calendar information that can be retrieved from that service.
;~)

Quicken 07 remains after Archive and Install?

Will the Quicken 07 application AND all my accounts remain after doing Archive and Install? I mean, will they be up and ready to use or need to be located in a folder and re-installed?

On an "Archive and Install", you have the option to save user data and network settings. This will copy all your user data into the home directory on the new install, and make the install process as seamless as possible. Applications are copied over as well, I believe, but if they're not they are left in the "Previous System" folder and you can copy them over manually and test them out. I believe "Quicken" is one of those applications where you just drag it to the applications folder to install it. As such, it should migrate to the new system easily and be up and running without the need to reinstall it. Most apps that require reinstalls are those that put extensions and plug-ins into the system folder (Adobe CS3, for example). Some things to keep in mind:
Corrupt preference files can cause applications to run funny or not at all. If an app doesnt behave normally then remove the preference file for that application from your user library. Corrupt preference files can happen during an install, so its good to be aware of the possibility they might crop up.
In a similar manner as corrupt preference files, sometimes the install process can change the permissions on files and folders, which will result in the same funky behavior. Using Disk utility to fix permissions BEFORE and AFTER the install will greatly reduce the probability of this being an issue.

Spell check issue after 'archive and install'

hi,
after doing an 'archive and install', the apple spell check doesn't work no more. whatever program i use with the spell check activated will give me a failure notice as soon as i start typing "spell check could not be detected" (or sthg similar, i get the message in german). the result is a close-to-freeze of that program until i 'okay' the notification.
anybody an idea how to properly (re-)instal the spell check so that my OS recognizes it?
thanks and greets!

Get Pacifist...
http://www.charlessoft.com/
then extract what you need from your Install Disk.
Or try reinstalling like the last big Combo update...
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions afterwords, reboot.

After Archive and Install, music and photos lost

Hello, I installed Leopard yesterday on my Imac desktop and it went fine, but then somehow it locked me out of the hard drive, and then...the blue screen. I put the orginal Tiger disk back in and re-installed the previous software, opting for 'archive and install'. It worked but my question is this;
Within the previous system folder, my music and photos are still missing. All I see is the iphoto icon which opens to a completely empty program. (Yet the info on this Icon says it is a 1 gb in there). Are my photos lost, really? And if not, how may I retrieve them? Thanks in advance.

You may find it in the Previous System Folder created during an Archive and Install that contains your old system. Assuming you have no need for its contents you can delete the PSF and recover the disk space.
Of course if the hard drive is corrupted then you may have performed an Archive and Install on a corrupted drive which will result in a corrupted installation. Consider doing the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

After archive and install, can you go back to old system?

After some trouble with permissions, I decided to do a clean archive and install from 10.2.8. Too late I realized that the install would be 10.2.
The permission trouble did not go away, and now I have additional trouble with upgrading everything, the combo upgrade to 10.2.8 does not work, error messages etc.
Is there a way I can undo this and use my old system 10.2.8 again which is saved in a folder?
Thanks.

Hiltraut:
As ali brown has already pointed out your iMac does, indeed, have 2 Firewire ports. Depending on which optical drive you have (the computer shipped with CD-RW, DVD/CD-RW, or SuperDrive) you can install Tiger directly.
Since you have an older version of Jaguar, and since it does not seem to be very co-operative, I suggest that you seriously consider upgrading to Panther or Tiger. To install Panther your computer will need to meet the minimum system requirements for Panther. You will need to purchase the Full Retail version of Panther.
To install Tiger your computer will need to meet the minimum system requirements for Tiger. You will need to purchase the Full Retail version of Tiger.
You can purchase universal installer versions of Panther, guaranteed to install, or Tiger on CDs, from applerescue. Please note that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore, very likely, cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...
If you decide to go that route please post back for assistance with how to proceed.
Good luck.
cornelius

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

Archive and Install - Getting Mailboxes Back

I was forced into re-installing Tiger due to the freezing issues with Leopard. The only option I had was "Archive and Install". I could not preserve user settings (it was greyed out). What is the best way to get my stuff back. In particular Mailboxed. I do see that all my Previous Stuff was put into a "Previous Folder". How do I get my mailboxes and my saved mail back into the mail program?

I'm afraid yes... I went to Disk Utility - File - New - Disk Image from folder. And then chose the folder with my user name. It goes ahead and creates the image file - which is 56kb btw.
The weird thing is that the Previous System file is 30gb. So, there is no way that my stuff is deleted. Just don't know how to get to it.
Any ideas?

Archive and Install - Getting Playlists Back

I was forced into re-installing Tiger due to the freezing issues with Leopard. The only option I had was "Archive and Install". I could not preserve user settings (it was greyed out). What is the best way to get my stuff back. In particular Playlists. I can easily find my songs and put them back in iTunes, but where did my playlists go? How can I get those back.

I'm afraid yes... I went to Disk Utility - File - New - Disk Image from folder. And then chose the folder with my user name. It goes ahead and creates the image file - which is 56kb btw.
The weird thing is that the Previous System file is 30gb. So, there is no way that my stuff is deleted. Just don't know how to get to it.
Any ideas?

Indexing goes on for 12 kours + after archive and install Leopard 5.8

Hi
I have because of a problem with Time Machine been suffested to run Archive and install from the installation disk. All has worked out fine, but before using Time Machine the computer need to index the contents on the HD. I only see a progres bar with "estimating time" when clicking on spotlight in the right upper corner. It has been doing this during more than 12 hours.
Any remedy abyone
Thanks in advance

can you launch activity monitor and "kill the offending app? I know that the indexing of spotlight is something quite major, but it should not take that long and cause so much difficulty.
There might be a possibility that spotlight is trying to access the old sparseimage (was it passworded?) and cannot. So could you try mounting that and see if that makes any difference? (NB that is usually a hidden file but you can make it "visible" with onyx).
Hope you'll be lucky.

Archive and install (keep user's settings) didn't work

History
PPC G5, original 1.8GHz single proccessor, OS 10.4.8
1) using Brother P-Touch Editor 'uninstall' program, uninstalled ver 3.2
2) installed version 3.2a
3) removed P-Touch print driver 1.4
4) installed print driver 1.41 -> it works (I don't know if it worked after updating to 10.4.8, but never had any troubles)
5) -> PhotoShop does not load, splash screen shows 1/2 second, then nothing
Console shows
2007-03-04 21:20:27.350 Adobe Photoshop CS2[398] CFLog (21): Cannot
find executable for CFBundle 0x81fa4d0 </Applications/Adobe
Photoshop CS2/Adobe Photoshop CS2.app/Contents/Frameworks/
LicMan.framework> (not loaded)
Failed to load LicMan.framework
Nisus Writer Express says I am unregistered pop up to use demo version or enter license #, pressing enter license #, it just goes to new document, does not allow license # to be entered
Console shows:
2007-03-05 20:29:01.013 Nisus Writer Express[980] Could not load
Feedback defaults
(this might not be an exclusive list of software not working)
6) Backed up HD. this process was stopped with this error message:
There was an error during copying Library from source to target: ditto: /Library/./Receipts/SecUpd2005-004Pan.pkg/Contents/Resources/French.lproj/Licen se.rtf; Input/out error
(Note I am not running French version of anything)
7) I replaced this file from a back up. The two files had the same date and size. This did not help problems. I then was able to complete the backup successfully
Today
1) I did a archive and install, keeping users preferences.
rebooting I got this error:
Application Launch Failure
The application "Transport Monitor" could not be launched because of a shared library error: "8<Transport Monitor><Transport Monitor><HotSyncLib.PPC>"
2) After reading Apple's warnings that things might not work properly after an archive and install until you upgrade to version you had before, I downloaded the 10.4.8 combo updater.
Still got the same error when rebooting
3) Ran software update and updated Daylight savings, some security patches, Java, etc.
4) On reboot I still get this error about the Transport Monitor/shared library
HELP?

Perhaps you should try reinstalling Photoshop and Nisus Writer, but first be sure you completely uninstall them:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Most applications create preference files which are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can located them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.
There are also several shareware utilities that can uninstall applications:
AppZapper
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at www.versiontracker.com or www.mackupdate.com.
For more information visit The XLab FAQs and read the FAQ on removing software.

Can't open Virtual Machines after "Archive and Install" of Snow Leopard OS

Hi all,
Please bear with me while I provide a bit of background info for my issue:
I just installed a copy of Adobe Photoshop CS5, during which I was actually forced to archive and install my Snow Leopard because of an installation error. So, I inserted my Snow Leopard disc and let the OS X installer do its thing. I remember, somewhere along the way, an admonishment that this process may somehow corrupt any virtual machines that may be installed, but throwing caution to the wind, I went ahead anyway.
Well, turns out it did indeed corrupt my installation of Parallels 6 somehow, and now none of my VMs work. When I open Parallels, and select File -> Open, then select whichever VM I want, a screen flashes so quickly I can't see it (I assume it says something like "Opening XYZ Virtual Machine"), and then.......nothing.
Thus far, I have tried to uninstall and reinstall Parallels 6 (using the KB article that directs you to delete a bunch of files via Terminal after running the packaged uninstaller) and I deleted my VMs and restored backup copies of them from several months ago.
I'm now at a loss - any ideas what I can do to get Parallels to function again? I don't know if somehow permissions were modified, or if there are any other particulars that the reinstall of Snow Leopard may have made to cause parallels to be unable to open my VMs.
Appreciate any advice in advance!

I think I would look at if you have the latest Parallels;
clone and backup your system and files before doing anything;
boot off 2nd hard drive and run Apple First Aid + (Disk Warrior or DG3 or TechTool Pro 5).
Always be prepared to be able to restore your system to prior point, that could even mean keeping 10.6.4 around for a month until you know 10.6.5 and 3rd party software and drivers all play nice together.
Bottom line: invest in two backup sets and methods; a copy of SuperDuper or CCC; and Disk Warrior.
I've used VBox, Fusion but not Parallels, plus Windows XP Mode, VHDs and VMs under Windows Vista/7.
I'd go back to ERASE and INSTALL and then do all your updates, then start on 3rd party with main packages first (CS5 and others). Off load, save, backup everything and anything you might need first of course.
Last but actually #1: a small 30GB OS X 10.6.5 drive volume (can take the 30GB from one of your backup drive is fine) so you can run the latest DU plus other system maintenance (DVDs get old, out of date, slow to boot, can't use Finder and other programs).

Freeze during 10.4 archive and install

Similar Messages

Maybe you are looking for