Freeze panes (like in xl)in basic list

Hai,
i need freeze panes(like in xl) option in basic list .
thank u
ram

Hi,
This option is not available in SAP. Please transport is to excel at there you can prepare your file.
Reward points if useful,
Miro

Similar Messages

Freeze panes(like in xl) option in basic list

freeze panes(like in xl) option in basic list
thank u in advance
ram

Hi,
I think you are displaying report in ALV format.
You use fix the column by the option
fieldcatalog-key = 'X'.
Now when u scroll right or left then this column will be fixed.
Regards,
Vinod.
Edited by: Vinod Iyer on May 23, 2008 5:16 PM

Freeze panes, like in Excel?

Can we have the freeze panes effect in Flex? I like my top
component staying at the same position in the page while I can
scroll the bottom part up and down. Thanks

Sure.
A Flex app consists of navigators, containers and display
components. Use two containers, and only enable scrolling in the
one you want.
I suggest you set vertical and horizontalScrollPolicy="off"
for all your containers, including Application. Turn them on where
you specifically want them. The default behavior,
scrollPolicy="auto" often works, but also becomes very confusing
when you have deeply nested containers, and scrollbars start
popping up all over the place.
Tracy

Can one SPLIT or FREEZE PANES like one can in Excel?

In Excel one can SPLIT PANES or FREEZE PANES.
Is it possible to do anything similar to this in Numbers 08?
Or in any previous version of Numbers?

Sheer,
No, we can not freeze or split panes. And, this is the first version of Numbers. Perhaps in a later version...
By the way, Pages does something very similar to Excel's Print Titles that you may find an acceptable substitute. See 'Using a Table Header Row or Column' in Numbers User Guide, page 69.
Jerry

Apex 4.0, want freeze panes like property for reports header row

Hello all,
I have some reports (Interactive, SQL) where when a user moves down to see the bottom rows, I want the header row should also move down with them, means the header row should remain constant in the screen only the data rows move up. Is there a way to do this.
Is there any option to do this?
Thanks
Tauceef
Edited by: Tauceef on Oct 2, 2010 11:33 AM

Is this possible? If there's a way to reference the column values for conditional display, I haven't been able to find it. No, this is not possible. If you want to conditionally render individual values rather than entire columns based on the value of other columns, build the logic into the SQL query using <tt>case</tt> or <tt>decode</tt> so that either the value or null is returned depending on the condition, or use a custom report template with conditional column templates, or a custom named column template.

Can pp col headings act like freeze pane in excel

Hi. We run 2012 enterprise. Can co headings on my pivot table scroll as freeze pane does in regular excel? How?

Hi, your Situation is as follow?:
You have a powerpivot model, and a pivot-table based on this PP data, created with Excel 2013
Now you want the Pivot-table columns to freeze if you scroll down the Excel sheet?
IMHO you can't do this because Excel has no Feature to freeze Pivot-table column, but can freeze columns of Excel table objects
You can get PP data into a Excel table object by creating a DAX Query, see:
http://www.sqlbi.com/articles/linkback-tables-in-powerpivot-for-excel-2013

Freeze Panes Functionality

I am required to develop a report that has a large number of columns. For readability the first 3 columns must remain frozen during horizontal scrolling (much like excel freeze panes).
So far I have achieved this with two regions with different column sets from the same report displayed next to each other, This way I can make the right hand report region scroll (<div> tags in the Header & Footer of this region)while leaving the left hand report static.
This leaves me with a problem where I need to link the pagination of both report regions. I am trying to change the SQL on the right hand report to only return the records displayed in the right hand region, my SQL for the right region Looks something like this but does not work:
Select * from TABLE_NAME WHERE ID IN (:P3_LEFT_REGION)
I believe it is because I am trying to reference a region as a list which I cannot do or am doing wrong.
So my question is "Is there a better way to do this and how?"

wow, it would cost your company so much less if your users can just download into Excel and do the fancy stuff there.
Next they are going to ask you for more Excel-like functionality.

JTextArea with freeze pane functionality

Greetings. I am trying to implement a plain text viewer that has some sort of "freeze pane" functionality (like that found in MS Excel)
I took the approach of using 4 JTextArea and put them into a JScrollPane, its row header, column header and upper-left corner. All these text areas share the same document.
Everything works as expected. When I scroll the lower-right pane, the row and column headers scroll correspondingly. The problem I have is that the document in the lower-right pane now shows duplicate portion of the document that is already showing in the row and column headers.
Knowing that this should merely be a matter of shifting the Viewport on the document, I went through the documentation and java source, and just couldn't find a way to translate the view. SetViewPosition() works to a certain extent, but the scrollbars allow users to scroll back to the origin and reveal the duplicate data, which is undesirable.
Your help with find out a way to relocate the view to the desired location is much appreciated.
khsu

some sample code attached (with a quick hack in attempt to making it work, at least presentation-wise)
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import javax.swing.plaf.*;
import javax.swing.plaf.basic.*;
import javax.swing.text.*;
public class SplitViewFrame extends JFrame {
    int splitX = 100;
    int splitY = 100;
    public static void main(String[] args) {
        // Create application frame.
        SplitViewFrame frame = new SplitViewFrame();
        // Show frame
        frame.setVisible(true);
     * The constructor.
     public SplitViewFrame() {
        JMenuBar menuBar = new JMenuBar();
        JMenu menuFile = new JMenu();
        JMenuItem menuFileExit = new JMenuItem();
        menuFile.setLabel("File");
        menuFileExit.setLabel("Exit");
        // Add action listener.for the menu button
        menuFileExit.addActionListener
            new ActionListener() {
                public void actionPerformed(ActionEvent e) {
                    SplitViewFrame.this.windowClosed();
        menuFile.add(menuFileExit);
        menuBar.add(menuFile);
        setTitle("SplitView");
        setJMenuBar(menuBar);
        setSize(new Dimension(640, 480));
        // Add window listener.
        this.addWindowListener
            new WindowAdapter() {
                public void windowClosing(WindowEvent e) {
                    SplitViewFrame.this.windowClosed();
        makeFreezePane();
    void makeFreezePane() {
        Container cp = getContentPane();
        Font font = new Font("monospaced", Font.PLAIN, 14);
        OffsetTextArea ta = new OffsetTextArea();
        ta.setSplit(splitX, splitY);
        ta.setOpaque(false);
        ta.setFont(font);
        // read doc
        readDocIntoTextArea(ta, "..\\afscheck.txt");
        JScrollPane jsp = new JScrollPane(ta);
        jsp.getViewport().setBackground(Color.white);
        Document doc = ta.getDocument();
        // dump doc
        //dumpDocument(doc);
        JViewport ulVP = makeViewport(doc, font, 0, 0, splitX, splitY);
        JViewport urVP = makeViewport(doc, font, splitX, 0, 20, splitY);
        JViewport llVP = makeViewport(doc, font, 0, splitY, splitX, 20);
        jsp.setRowHeader(llVP);
        jsp.setColumnHeader(urVP);
        jsp.setCorner(JScrollPane.UPPER_LEFT_CORNER, ulVP);
        jsp.setCorner(JScrollPane.UPPER_RIGHT_CORNER, new Corner());
        jsp.setCorner(JScrollPane.LOWER_LEFT_CORNER, new Corner());
        jsp.setCorner(JScrollPane.LOWER_RIGHT_CORNER, new Corner());
        cp.setLayout(new BorderLayout());
        cp.add(jsp, BorderLayout.CENTER);
    void readDocIntoTextArea(JTextArea ta, String filename) {
        try {
            File f = new File(filename);
            FileInputStream fis = new FileInputStream(f);
            ByteArrayOutputStream baos = new ByteArrayOutputStream();
            int br = 0;
            byte[] buf = new byte[1024000];
            while ((br = fis.read(buf, 0, buf.length)) != -1) {
                baos.write(buf, 0, br);
            fis.close();
            ta.setText(baos.toString());
        } catch (Exception e) {
            e.printStackTrace();
            ta.setText("Failed to load text.");
    protected void windowClosed() {
        System.exit(0);
    JViewport makeViewport(Document doc, Font f, int splitX, int splitY, int width, int height) {
        JViewport vp = new JViewport();
        OffsetTextArea ta = new OffsetTextArea();
        ta.setSplit(splitX, splitY);
        ta.setDocument(doc);
        ta.setFont(f);
        ta.setBackground(Color.gray);
        vp.setView(ta);
        vp.setBackground(Color.gray);
        vp.setPreferredSize(new Dimension(width, height));
        return vp;
    static void dumpDocument(Document doc) {
        Element[] elms = doc.getRootElements();
        for (int i = 0; i < elms.length; i++) {
            dumpElement(elms, 0);
static void dumpElement(Element elm, int level) {
for (int i = 0; i < level; i++) System.out.print(" ");
System.out.print(elm.getName());
if ( elm.isLeaf() && elm.getName().equals("content")) {
try {
int s = elm.getStartOffset();
int e = elm.getEndOffset();
System.out.println(elm.getDocument().getText(
s, e-s));
} catch (Exception e) {
System.out.println(e.getLocalizedMessage());
return;
System.out.println();
for (int i = 0; i < elm.getElementCount(); i++) {
dumpElement(elm.getElement(i), level+1);
class OffsetTextArea extends JTextArea {
int splitX = 0;
int splitY = 0;
public void setSplit(int x, int y) {
splitX = x;
splitY = y;
public void paint(Graphics g) {
g.translate(-splitX, -splitY);
super.paint(g);
g.translate( splitX, splitY);
/* Corner.java is used by ScrollDemo.java. */
class Corner extends JComponent {
protected void paintComponent(Graphics g) {
// Fill me with dirty brown/orange.
g.setColor(new Color(230, 163, 4));
g.fillRect(0, 0, getWidth(), getHeight());

Freeze panes in OBIEE 11g

Hi All,
Glad to post regarding Freezing panes in OBIEE 11g.
Since this has got most hits in the search.
I searched a quite few websites like replies from BI Joe and few others. But couldnt resolve this.
Would be great help for all those who are looking for workaround regarding the same.
Also - another feature likely in 11.1.1.6 - freeze panes for rows and columns :-). But need it in 11.1.5
Regards
MuRam
http://obiee10grevisited.blogspot.in/
Edited by: MuRam on Feb 29, 2012 10:23 AM

check with oracle support. they might released patches for 11.1.5

LINKING BETWEEN FUNCTION MODULE AND INTERACTIVE NO. OF BASIC LIST

Dear Mates,
Iam preparing Z report for BOM display of FG and SFG materials.
Iam displaying the Basic List using the MAST table. Here i double click on the material no.
Here iam using the function module :CS_BOM_EXPL_MAT_V2 for fetching the data from STPOX structure ,here i want to link material no. which has been from basic list and the above said function module.
Can anybody provide the solution for the above said linking in ALV interactive report.
Please treat it very urgent as this report is to be presented on high priority.
Thanks in advance
Subbu

Hi
use the Function module REUSE_ALV_POPUP_TO_SELECT.
check the below example:
REPORT ZSR_ALV_INTERACTIVE.
TABLES : LFA1,EKKO,EKPO.
SELECT-OPTIONS : VENDOR FOR LFA1-LIFNR.
DATA : BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF ITAB.
DATA : BEGIN OF JTAB OCCURS 0,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
END OF JTAB.
DATA : BEGIN OF KTAB OCCURS 0,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF KTAB.
TYPE-POOLS : SLIS.
DATA : REPID LIKE SY-REPID.
DATA :LFA1_B TYPE SLIS_T_FIELDCAT_ALV,
LFA1_W TYPE SLIS_FIELDCAT_ALV,
EKKO_B TYPE SLIS_T_FIELDCAT_ALV,
EKKO_W TYPE SLIS_FIELDCAT_ALV,
EKPO_B TYPE SLIS_T_FIELDCAT_ALV,
EKPO_W TYPE SLIS_FIELDCAT_ALV,
EVENTS_B TYPE SLIS_T_EVENT,
EVENTS_W TYPE SLIS_ALV_EVENT.
PERFORM GET_VAL.
REPID = SY-REPID.
SELECT LIFNR NAME1 FROM LFA1 INTO TABLE ITAB WHERE LIFNR IN VENDOR.
*perform val USING USER_COMMAND sel.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = LFA1_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = ITAB.
*& Form GET_VAL
text this is to put column headings
FORM GET_VAL.
LFA1_W-FIELDNAME = 'LIFNR'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'LIFNR'.
APPEND LFA1_W TO LFA1_B.
LFA1_W-FIELDNAME = 'NAME1'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'NAME1'.
APPEND LFA1_W TO LFA1_B.
EKKO_W-FIELDNAME = 'EBELN'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'EBELN'.
APPEND EKKO_W TO EKKO_B.
EKKO_W-FIELDNAME = 'AEDAT'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'AEDAT'.
APPEND EKKO_W TO EKKO_B.
EKPO_W-FIELDNAME = 'EBELP'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'EBELP'.
APPEND EKPO_W TO EKPO_B.
EKPO_W-FIELDNAME = 'MATNR'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'MATNR'.
APPEND EKPO_W TO EKPO_B.
EVENTS_W-NAME = 'USER_COMMAND'.
EVENTS_W-FORM = 'VAL'.
APPEND EVENTS_W TO EVENTS_B.
ENDFORM. "GET_VAL
*& Form VAL
text
-->USER_COMMANtext
-->SEL text for retrieving data
FORM VAL USING USER_COMMAND LIKE SY-UCOMM SEL TYPE SLIS_SELFIELD.
DATA : VEN(10) TYPE N,
PO(10) TYPE N.
DATA : MAT(10) TYPE C.
IF SEL-FIELDNAME = 'LIFNR'.
VEN = SEL-VALUE.
SELECT EBELN AEDAT FROM EKKO INTO TABLE JTAB WHERE LIFNR = VEN.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
I_STRUCTURE_NAME = EKKO_B
IT_FIELDCAT = EKKO_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = JTAB.
ENDIF.
IF SEL-FIELDNAME = 'EBELN'.
PO = SEL-VALUE.
SELECT EBELP MATNR FROM EKPO INTO TABLE KTAB WHERE EBELN = PO.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = 'ITEM DETAILS'
I_TABNAME = 'EKPO'
IT_FIELDCAT = EKPO_B
I_CALLBACK_PROGRAM = REPID
IMPORTING
ES_SELFIELD = SEL
TABLES
T_OUTTAB = KTAB.
ENDIF.
logic to select a record
IF SEL-FIELDNAME = 'MATNR'.
MAT = SEL-VALUE.
SET PARAMETER ID 'MAT' FIELD MAT.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "VAL
check my example:
REPORT ZSR_ALV_INTERACTIVE.
TABLES : LFA1,EKKO,EKPO.
SELECT-OPTIONS : VENDOR FOR LFA1-LIFNR.
DATA : BEGIN OF ITAB OCCURS 0,
LIFNR LIKE LFA1-LIFNR,
NAME1 LIKE LFA1-NAME1,
END OF ITAB.
DATA : BEGIN OF JTAB OCCURS 0,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
END OF JTAB.
DATA : BEGIN OF KTAB OCCURS 0,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
END OF KTAB.
TYPE-POOLS : SLIS.
DATA : REPID LIKE SY-REPID.
DATA :LFA1_B TYPE SLIS_T_FIELDCAT_ALV,
LFA1_W TYPE SLIS_FIELDCAT_ALV,
EKKO_B TYPE SLIS_T_FIELDCAT_ALV,
EKKO_W TYPE SLIS_FIELDCAT_ALV,
EKPO_B TYPE SLIS_T_FIELDCAT_ALV,
EKPO_W TYPE SLIS_FIELDCAT_ALV,
EVENTS_B TYPE SLIS_T_EVENT,
EVENTS_W TYPE SLIS_ALV_EVENT.
PERFORM GET_VAL.
REPID = SY-REPID.
SELECT LIFNR NAME1 FROM LFA1 INTO TABLE ITAB WHERE LIFNR IN VENDOR.
*perform val USING USER_COMMAND sel.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
IT_FIELDCAT = LFA1_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = ITAB.
*& Form GET_VAL
text this is to put column headings
FORM GET_VAL.
LFA1_W-FIELDNAME = 'LIFNR'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'LIFNR'.
APPEND LFA1_W TO LFA1_B.
LFA1_W-FIELDNAME = 'NAME1'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'NAME1'.
APPEND LFA1_W TO LFA1_B.
EKKO_W-FIELDNAME = 'EBELN'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'EBELN'.
APPEND EKKO_W TO EKKO_B.
EKKO_W-FIELDNAME = 'AEDAT'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'AEDAT'.
APPEND EKKO_W TO EKKO_B.
EKPO_W-FIELDNAME = 'EBELP'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'EBELP'.
APPEND EKPO_W TO EKPO_B.
EKPO_W-FIELDNAME = 'MATNR'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'MATNR'.
APPEND EKPO_W TO EKPO_B.
EVENTS_W-NAME = 'USER_COMMAND'.
EVENTS_W-FORM = 'VAL'.
APPEND EVENTS_W TO EVENTS_B.
ENDFORM. "GET_VAL
*& Form VAL
text
-->USER_COMMANtext
-->SEL text for retrieving data
FORM VAL USING USER_COMMAND LIKE SY-UCOMM SEL TYPE SLIS_SELFIELD.
DATA : VEN(10) TYPE N,
PO(10) TYPE N.
DATA : MAT(10) TYPE C.
IF SEL-FIELDNAME = 'LIFNR'.
VEN = SEL-VALUE.
SELECT EBELN AEDAT FROM EKKO INTO TABLE JTAB WHERE LIFNR = VEN.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = REPID
I_STRUCTURE_NAME = EKKO_B
IT_FIELDCAT = EKKO_B
IT_EVENTS = EVENTS_B
TABLES
T_OUTTAB = JTAB.
ENDIF.
IF SEL-FIELDNAME = 'EBELN'.
PO = SEL-VALUE.
SELECT EBELP MATNR FROM EKPO INTO TABLE KTAB WHERE EBELN = PO.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
I_TITLE = 'ITEM DETAILS'
I_TABNAME = 'EKPO'
IT_FIELDCAT = EKPO_B
I_CALLBACK_PROGRAM = REPID
IMPORTING
ES_SELFIELD = SEL
TABLES
T_OUTTAB = KTAB.
ENDIF.
logic to select a record
IF SEL-FIELDNAME = 'MATNR'.
MAT = SEL-VALUE.
SET PARAMETER ID 'MAT' FIELD MAT.
CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "VAL

Check box in basic list

Hi frieds,
I wants to display a list of record in basic list and also one chek box for every record.
Then based on selected check box i want to cancel that record in database means i want to set it's flag. also in application toolbar of basic list display cancel button.
can any one gives me code for this.
Thank you.
Regards,
Virat

Hi
See the sample example code
and do accordingly
TABLES:MARA.
DATA:BEGIN OF GT_MARA OCCURS 0,
MATNR LIKE MARA-MATNR,
END OF GT_MARA,
GV_CB,
GV_CBV,
GV_LINES TYPE I,
INDEX TYPE I,
SY_INDEX TYPE I,
GV_LINES1 TYPE I,
MATNR LIKE MARA-MATNR.
SELECT-OPTIONS:S_MATNR FOR MARA-MATNR.
SELECT
MATNR FROM MARA
INTO TABLE GT_MARA
WHERE MATNR IN S_MATNR.
IF SY-SUBRC = 0.
DESCRIBE TABLE GT_MARA LINES GV_LINES.
ENDIF.
LOOP AT GT_MARA.
WRITE:/ GV_CB AS CHECKBOX,
GT_MARA-MATNR.
ENDLOOP.
CLEAR GT_MARA.
WRITE:'Total num of records is ',GV_LINES.
SET PF-STATUS 'DEL'.
AT USER-COMMAND.
IF SY-UCOMM = 'DEL' OR SY-UCOMM = 'PICK'.
DO 50 TIMES.
SY_INDEX = SY-INDEX.
READ LINE SY_INDEX FIELD VALUE GV_CB
GT_MARA-MATNR INTO MATNR.
IF GV_CB = 'X'." AND MATNR IS NOT INITIAL.
LOOP AT GT_MARA." WHERE MATNR = MATNR.
DELETE GT_MARA.
CLEAR GT_MARA.
ENDLOOP.
delete gt_mara index sy_index.
ENDIF.
ENDDO.
DESCRIBE TABLE GT_MARA LINES GV_LINES1.
WRITE:'Total num of records is ',GV_LINES1.
CLEAR:GV_LINES .
LOOP AT GT_MARA.
WRITE:/ GT_MARA-MATNR.
ENDLOOP.
ENDIF.
Reward points for useful Answers
Regards
Anji

Button in basic list

Hi
I want to set a button in basic list of a transaction,not an ALV.
I don't want to see the button in the detail list. How should i set this and where. Ideally where should pf-status be set in ?.
Answers will be rewarded.
Thanks
Varun Mathur
Edited by: Varun Mathur on Feb 12, 2008 7:42 AM

HI,
   check this program. in this the basic list has the gui and not the detail list...here the detail list is done using alv..dont worry abt that.
report z_banks1_rp1.
TABLE
tables : zacc_master2.
TYPE-POOLS
type-pools slis.
*INTERNAL TABLE
data : itab like zacc_master2 occurs 0 with header line.
data : itab1 like zacc_master2 occurs 0 with header line.
DATA
data : gt_fcat type slis_t_fieldcat_alv,
       fcat like line of gt_fcat.
data : check type c length 1,
       wa type c length 20.
select * from zacc_master2 into table itab.
write : '       ACCOUNT NUMBER' intensified color 3.
loop at itab.
write: / check as checkbox, itab-zaccno.
endloop.
hide : itab.
START OF SELECTION
start-of-selection.
set pf-status 'ZMBANKS1'.
AT LINE SELECTION
at line-selection.
AT USER-COMMAND
at user-command.
case sy-ucomm.
when 'SUBMIT'.
do.
read line sy-index field value check itab-zaccno into wa.
if sy-subrc <> 0.
exit.
elseif check = 'X'.
read table itab with key zaccno = wa.
if sy-subrc eq 0.
move-corresponding itab to itab1.
append itab1.
endif.
endif.
enddo.
CALLING SUB-ROUTINE
perform fieldcatalog.
CALLING FUNCTION MODULE
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
it_fieldcat = gt_fcat[]
tables
t_outtab = itab1.
when 'BACK'.
call screen 0002.
*WHEN 'BACK1'.
*CALL SCREEN 0002.
endcase.
SUB ROUTINE DECLARATION
form fieldcatalog.
fcat-seltext_l = 'ACCOUNT NUMBER'.
fcat-fieldname = 'ZACCNO'.
fcat-tabname = 'ITAB1'.
append fcat to gt_fcat.
fcat-seltext_l = 'CUSTOMER ID'.
fcat-fieldname = 'ZCUSTID'.
fcat-tabname = 'ITAB1'.
append fcat to gt_fcat.
fcat-seltext_l = 'ACCOUNT TYPE'.
fcat-fieldname = 'ZACCTYPE'.
fcat-tabname = 'ITAB1'.
append fcat to gt_fcat.
fcat-seltext_l = 'ACCOUNT BALANCE'.
fcat-fieldname = 'ZBAL'.
fcat-tabname = 'ITAB1'.
append fcat to gt_fcat.
fcat-seltext_l = 'ACCOUNT CREATED DATE'.
fcat-fieldname = 'ZACCDATE'.
fcat-tabname = 'ITAB1'.
append fcat to gt_fcat.
fcat-seltext_l = 'STATUS'.
fcat-fieldname = 'ZSTAT'.
fcat-tabname = 'ITAB1'.
append fcat to gt_fcat.
endform.
Please reward if it is helpful.
regards,
sri

Refresh Classical report/basic list

Hi,
I have created a classical report/basic list where user can select check boxes and adjacent rows should be deleted. But after the action, I wish to refresh the report and remove the selected lines from displaying.
Please let me know how to achieve this.
Thanks in advance.
Nitin

Hi Nitin,
Check the following program.
Here on pressing the delete push button(FCODE: DELETE) it will delete all
rows which has adjacent checkboxes checked.
REPORT ztest_list_processing NO STANDARD PAGE HEADING .
TYPES: BEGIN OF ty_tab,
       delete,
       f1(3) TYPE c,
       f2(3) TYPE c,
       f3(3) TYPE c,
       END OF ty_tab.
DATA: it_tab TYPE TABLE OF ty_tab,
      wa_tab TYPE ty_tab.
DATA: w_delete TYPE c,
      w_lines TYPE i,
      w_ind TYPE i.
wa_tab-f1 = '111'.
wa_tab-f2 = 'ABC'.
wa_tab-f3 = '123'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '222'.
wa_tab-f2 = 'DEF'.
wa_tab-f3 = '456'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '333'.
wa_tab-f2 = 'GHI'.
wa_tab-f3 = '789'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '444'.
wa_tab-f2 = 'JKL'.
wa_tab-f3 = '987'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '555'.
wa_tab-f2 = 'MNO'.
wa_tab-f3 = '654'.
APPEND wa_tab TO it_tab.
SET PF-STATUS '100'. "Contains Delete button
PERFORM print_output.
"Logic which you can implement
AT USER-COMMAND.
CASE sy-ucomm.
    WHEN 'DELETE'.
      DESCRIBE TABLE it_tab LINES w_lines.
      DO w_lines TIMES. "To read all rows
        CLEAR: wa_tab.
        READ LINE w_ind FIELD VALUE wa_tab-delete
                                       wa_tab-f1. "Getting the values
        IF wa_tab-delete EQ 'X'. "Delete when check box is 'X'
          DELETE it_tab WHERE f1 = wa_tab-f1.
        ENDIF.
        ADD 1 TO w_ind."Index for next line
      ENDDO.
      IF it_tab IS INITIAL.
        WRITE: / 'There are no data in the table'.
      ELSE.
        PERFORM print_output. "Reprint the updated data(like refreshing)
      ENDIF.
      "Modified the existing Back button in standard Toolbar so that on
      "pressin the back button it will come to program and not to
      "previous displayed list
    WHEN '&BACK'.
      LEAVE SCREEN.
ENDCASE.
*&      Form print_output
*       text
* --> p1        text
* <-- p2        text
FORM print_output.
LOOP AT it_tab INTO wa_tab.
    WRITE:/ wa_tab-delete AS CHECKBOX INPUT ON, "Display as checkbox
          wa_tab-f1,
          wa_tab-f2,
          wa_tab-f3.
    IF sy-tabix EQ 1.
      w_ind = sy-linno. "Get the line position of first row
    ENDIF.
ENDLOOP.
Hope this helps you.
Regards,
Manoj Kumar P

Hoe to get data from basic list

Hi,
I have a requirement that, there are records in basic list about customer,after selecting the records from the basic list. run a transaction XD06 for this records using bdc, how to get these selected records into a internal table to run a bdc.
Regards & Thanks
sai

hi,
u need to write code in user_command.
U using ALV?
Than here is code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = 'ZALV_PRDS'
     i_callback_user_command           = <b>'USER_COMMAND'</b>
     it_fieldcat                             = t_fcat
     i_save                            = 'A'
     it_events                         = t_eve
   TABLES
      t_outtab                          = itab
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM user_command USING u_com LIKE sy-ucomm sel_field TYPE slis_selfield.
CASE u_com.
    WHEN '&IC1'.
      IF sel_field-fieldname = 'MATNR'.
        READ TABLE itab INDEX sel_field-tabindex.
        IF sy-subrc = 0.
          t_mat = itab-matnr.
          SET PARAMETER ID 'MAT' FIELD t_mat.
          CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
        ENDIF.
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
Here i am retrieving selected matnr into t_mat...and using it i am calling 'MM03'.
U have to give customer no into XD06 to skip first screen.
For this u have to find parameter ID ( Find through Technical Info), in this case it is KUN so u have to use KUN in place of MAT...
reward me back if not clear

Output screen basic list buttons

Hi frnds,
               what are the steps to create buttons in the application toolbar in our output screen.
like i m getting sales header data in my basic list so in the output i m having a button which i press then i will get sales item details.
so can anyone help me how to create that button there in the ouput screen.
regards,
sanjay

Hi,
You can copy the GUI STATUS STANDARD of the program SAPLKKBL in SE41 and create a new one..
in that add a button in the application toolbar section..
Then use call back pf status parameter to pass the subroutine to display the gui status..
Then use call back subroutine parameter in the alv function module to give the subroutine name..
check this example for using double click to get the item details.
TYPE-POOLS: slis.
DATA: BEGIN OF itab1 OCCURS 0,
        vbeln TYPE vbeln,
        bstnk TYPE vbak-bstnk,
        erdat TYPE vbak-erdat,
        kunnr TYPE vbak-kunnr,
      END OF itab1.
DATA: BEGIN OF itab2 OCCURS 0,
        vbeln TYPE vbeln,
        matnr TYPE vbap-matnr,
        netpr TYPE vbap-netpr,
        kwmeng TYPE vbap-kwmeng,
      END OF itab2.
DATA: t_fieldcatalog1 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog2 TYPE slis_t_fieldcat_alv.
DATA: v_repid         TYPE syrepid.
v_repid = sy-repid.
* Get the fieldcatalog1
PERFORM get_fieldcat1.
* Get the fieldcatalog2
PERFORM get_fieldcat2.
SELECT vbeln bstnk erdat kunnr UP TO 10 ROWS
       INTO TABLE itab1
       FROM vbak.
IF NOT itab1[] IS INITIAL.
SELECT vbeln matnr netpr kwmeng UP TO 10 ROWS
         INTO TABLE itab2
         FROM vbap
         FOR ALL ENTRIES IN itab1
         WHERE vbeln = itab1-vbeln.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
     EXPORTING
          i_callback_program      = v_repid
          i_callback_user_command = 'DISPLAY_DETAIL'
          it_fieldcat             = t_fieldcatalog1
     TABLES
          t_outtab                = itab1.
*       FORM display_detail                                           *
* --> UCOMM                                                         *
* --> SELFIELD                                                      *
FORM display_detail USING ucomm LIKE sy-ucomm
                        selfield TYPE slis_selfield.
DATA: itab2_temp LIKE itab2 OCCURS 0 WITH HEADER LINE.
IF ucomm = '&IC1'.
    READ TABLE itab1 INDEX selfield-tabindex.
    IF sy-subrc = 0.
      LOOP AT itab2 WHERE vbeln = itab1-vbeln.
        MOVE itab2 TO itab2_temp.
        APPEND itab2_temp.
      ENDLOOP.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
           EXPORTING
                i_callback_program = v_repid
                it_fieldcat        = t_fieldcatalog2
           TABLES
                t_outtab           = itab2_temp.
    ENDIF.
ENDIF.
ENDFORM.
*       FORM GET_FIELDCAT1                                            *
FORM get_fieldcat1.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-hotspot   = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'BSTNK'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'BSTNK'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'ERDAT'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname   = 'ITAB1'.
s_fieldcatalog-rollname = 'KUNNR'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
ENDFORM.
*       FORM GET_FIELDCAT2                                            *
FORM get_fieldcat2.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'NETPR'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KWMENG'.
s_fieldcatalog-tabname   = 'ITAB2'.
s_fieldcatalog-rollname = 'KWMENG'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
ENDFORM.
Thanks
Naren

Freeze panes (like in xl)in basic list

Similar Messages

Maybe you are looking for