Freezes every time it is open on one of our computers (not all).

Started after Firefox updated on Wednesday.

The C3150 has a sensor and it is not necessary to scan the alignment page for this model. Make sure you are using fresh white paper for the alignment Page 16 of the manual says:
Note If you have colored paper loaded in the input tray when you align the print cartridges, the alignment will fail. Load unused plain white paperinto the input tray, and then try the alignment again. If the alignment fails again, you might have a defective sensor or print cartridge. Contact HP Support. Go to www.hp.com/support. If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
Before calling HP support I would try cleaning the sensor with a damp Q-tip. The sensor is a small black plastic item mounted on the lower right side of the carriage, toward the back and just to the right of the right cartridge. The part to clean would be the area underneath the sensor.
Regards,
Bob Headrick, MS MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

HT5129 How can one stop this annoying MobileMe notice from appearing every time iPhoto is opened?

How can one stop the annoying MobileMe notice from appearing every time iPhoto is opened?

Well then you can not remove something that obviously has been removed
Did you remove the references in the iPhoto preferences? Did this eliminate the problem? If so then you are done and your problem has been
N resolved.
LN

I have this problem every time when I open my computer; Photos for the iCloud account cannot be accessed. Review your account information in System Preferences.

processor 2.5 Ghz intel core i5
memory 4 GB 1600 Mhz DDR3
Graphics Intel HD graphics 4000 512 MB
Serial Number C1*******TY3
software OS X 10.8.5 (12F45)
my problem is, every time when I open my computer I get this note, Photo stream and it says I need to check something? And I also cannot share videos from youtube… there is no option for me to share on FB..
<Personal Information Edited by Host>

For Youtube and Facebook.
Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - Mavericks
Safe Mode - About
For Photo Stream, try System Preferences/iCloud - un-check Photos and then re-check.

Crystal Reports freezes every time I try to open a report.

Crystal Reports freezes every time I try to open a report. I feel like it has something to do with trying to locate the default printer, but Im not certain. Crystal Reports opens just fine,but the moment I try to open any report it just hangs. Please help!

My problem is very similar to this person's. I have 2 laptops with CR XI installed (same problem from original R2 through SP 5). The old laptop is an IBM Thinkpad R51. The new one is an HP Elitebook 6930p. Both have the exact same software and versions of Win XP and network security.
If I try to open a report that has an "invalid printer" selected, it will open in the old IBM (with the message, 'This report uses an invalid printer. The default printer will be used instead'), but on the new HP, it freezes and I have to do a CtlAltDel to get out.
I've tried everything Don Williams suggested, but the only thing that is logged in Admin Tools when this happens is a Security/Privilege Request" with no errors.
Clearly, when CR in the HP looks for the printer selected in the report and doesn't find it, that causes CR to freeze.
Any idea what difference between the 2 machines could cause this?
This is a royal pain, because I can only be on one computer at a time.
Thanks in advance.

Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks

Gary,
discussions may sometimes be slow for an hour or so (at which point the opening page of discussions will eventually apologize for the inconvenience, back on line soon...) but your description looks like a cache problem.
Try OnyX freeware to do some cleanup and see if that helps.
http://www.titanium.free.fr/index.html

I have a MacBook Air mid 2012 11" that keeps freezing every time I use it

Hi Everyone
I have a MacBook Air mid 2012 11" that keeps freezing every time I use it
It's running a i7 2ghz with 8gb ram And OS X 10.8.4
I have had the Air around 11 months and the last week is the first time it has ever frozen , now it will do it after about 15 min use
It seems a little warmer than usual and it will freeze no matter what is running , or just idle .
And just to add , no google chrome installed

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

How can I stop Firefox from re-setting its internet connection configuration every time I re-open the browser? It should stay at "no proxy" but doesn't.

In the past couple of days, every time I close Firefox 8.0, it re-sets the internet configuration to "manual configuration" -- which generates a "proxy server refusing connections" error message. I have to re-set to "no proxy" every time I re-open the browser. This never happened before yesterday. What can I do to make the "no proxy" setting an automatic default on opening? ISP is Verizon high-speed.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

None if these crash reports seem to have been send.
Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in Safe mode:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

Photoshop elements 13 FREEZING every time with Mac OS X Yosemite

Just purchased Photoshop elements 13, upgrading from version 10. 10 was running slow in editor so I thought the latest version would be faster but not only is it slower & stickier but I can not open the organizer. It freezes every time & I can not see my catalog pics. A few pics load & the rest are question marks or sand timer.....Then it freezes completely & I can not do anything until I force quit. I've tried most of the trouble shooting listed but NOTHING is working!! Please HELP!!!! So frustrating!!!!

yes, Adobe Photoshop Elements 13 for Mac, Windows - System requirements

My ipod freeze every time i plug in the computer i need help plz

my ipod freeze every time i plug on my computer i dont know how to reset and delete all songs plz help u.u

Does your iTunes see your nano?
iPod not recognized in 'My Computer' and in iTunes for Windows
iPod: Appears in Windows but not in iTunes
If so, then follow through this:
How to reset iPod
Restoring iPod to factory settings
If not, do one or more of the following
Restart your computer
Uninstall & Reinstall iTunes [Windows XP] [Windows Vista & 7]
Reset iPod (will NOT delete everything)
Go to My Computer (Windows XP) or Computer (Windows Vista & 7) and see if it shows
Restore iPod (WILL delete everything)
Make sure iTunes and iOS firmware is up to date.
Hope all this helps.
Message was edited by: keeferaf

Re: SQL-Developer Freezes Every Time I Click on a Trigger to Edit it

Yes: SQL-Developer Freezes Every Time I Click on a Trigger just to edit it, even though the trigger is disabled. How do I get SQL-Developer to stop freezing-up and making me re-boot every time I even just click on a Trigger to select it, so that I can then rt.-click and edit it. Sometimes, SQL-Developer won't freeze immediately upon selecting the Trigger with my mouse, it will allow me to rt.-click to bring up the pop-up menu where I then try to click on "Edit" so I can change the same trigger, & as soon as I choose "Edit" SQL-Developer freezes-up -- must reboot.
Also, one time I dropped a Trigger altogether in SQL-Developer, not just disabled it, but SQL-Developer was still launching the supposedly "dropped" trigger (the trigger also no longer appeared as an item under "Triggers" tree view) when I ran
a SQL Script that did INSERTs: this supposedly dropped Trigger that no longer appeared anywhere in SQL-Developer was still executing (I could tell because I was getting ERROR MESSAGES in the Messages box) and the Trigger that I had executed the DROP command on from within SQL-Programmer really was only dropped and stopped executing after I re-booted. Can you help me?
My immediate problem is the one above though. Do I need to create a Schema-Level Trigger to disable or drop all Triggers when I first logon (triggered by my logon system event), and then they will "CREATE" properly and stop freezing up and acting weird?

Sorry, the above thread should have been a "new" post, not a reply post.

Console (X-Fi) freezes EVERY time I click on EQ button (All 3 modes) -- HE

Hi,
I have the X-Fi Elite Pro and just recently developed this problem... my console freezes EVERY time I click on EQ button... I mean I have to hit Ctrl+Alt+Delete and kill it with task manager. This happens in all three modes. After I kill the process,?I can re-open the console and use it as normal -- As long as I NEVER CLICK on the EQ button... This happens regardless of the mode I am in. If I wait long enough, I will get an error message that says "Out of memory". The title of that error window varies... I wrote down a couple of them... once?the title?said?"modeEnTM" and last time it was "CTTheme."?Anyone else ever have this problem.. again... it just cropped up all of a sudden -- but it won't go away. I did uninstall all Creative software and drivers, deleted all Creative folders, deleted the registry entries?and reinstalled everything... but no change. Hope someone knows... -- ScribbleMeat

Perhaps you have something else which you installed that is conflicting with the Creative software. Try using Sysinternals autoruns or msconfig to disable all unnecassary start-up items and then see if EQ button still causes any crashes. Do you see any CPU usage spikes on any other processes whilst the Out of memory crash appears?Have you checked to see if your Virtual memory is set correctly? you can check this in Control Panel, System Properties > Advanced Tab > Performance SettingsMake sure you have a paging file set to a custom size of around 2046 or leave it on System managed size. You might want to also try out a program called CCleaner, this can clean up your temp files and registry without damaging your OS or program installations. If none of this helps, try uninstalling the complete driver set again and then using Driver Cleaner to make sure there is no trace left afterwards or go through the hard disk manually (Program Files, Documents and Settings) and remove all trace of Creative related software and configuration files.

Finder Freeze every time on 10.9.3

Hello,
I have a MBP 15" Retina (MacBookPro10,1)
After update, the Finder freeze every time.
Look the Activity Monitor image - http://d.pr/i/UGY4
I open a Finder Window and it Freeze
Then, after some seconds I can access the folder on window.
Please, help me, my MacBook Pro is unusable
Look the log on Console
03/06/14 16:27:33,084 WindowServer[98]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
03/06/14 16:27:47,085 WindowServer[98]: disable_update_likely_unbalanced: UI updates still disabled by application "Finder" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
03/06/14 16:28:06,034 WindowServer[98]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 33.95 seconds (server forcibly re-enabled them after 1.00 seconds)
03/06/14 16:28:06,039 Finder[306]: void CGSUpdateManager::log() const: conn 0xed03: spurious update.
03/06/14 16:32:21,848 WindowServer[98]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
03/06/14 16:32:35,848 WindowServer[98]: disable_update_likely_unbalanced: UI updates still disabled by application "Finder" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
03/06/14 16:32:59,300 WindowServer[98]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 38.45 seconds (server forcibly re-enabled them after 1.00 seconds)
03/06/14 16:32:59,596 Finder[306]: void CGSUpdateManager::log() const: conn 0xed03: spurious update.
03/06/14 16:40:22,098 WindowServer[98]: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
03/06/14 16:40:36,098 WindowServer[98]: disable_update_likely_unbalanced: UI updates still disabled by application "Finder" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
03/06/14 16:40:42,711 WindowServer[98]: common_reenable_update: UI updates were finally reenabled by application "Finder" after 21.61 seconds (server forcibly re-enabled them after 1.00 seconds)
03/06/14 16:40:42,830 Finder[306]: void CGSUpdateManager::log() const: conn 0xed03: spurious update.
Thanks Alex Leonardo

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Mac Mail freezes every time we receive an EPS file

Our Mac Mail freezes every time we receive an EPS file. We are running 10.7.3.

I wonder if your Mac is attempting to open the file directly.
I usuall zip my attachments before emailing them. This prevents any odd behavior on any computer and also precludes corruption during the email routing. Yes, this is only a workaround, but you might wait to see if others have a similar issue.
You can also run Console and read the log to see if there is any information about what is stalling the process.

1. What's the difference between private mode in Safari which i have to turn on every time again when opening safari. It's a two click activity which i would love to be able to set in the preference as default.

1. What's the difference between private mode in Safari which i have to turn on every time again when opening safari.
It's a two click activity which i would love to be able to set in the preference as default. It's tyering when have to do it everyday a few times. (Yes, i'm one of many who have the "i like safari but since the update crash everyday a few times" syndrome...
Yes, i have updated my system.
Yes, i have repared disk permissions with disk utility.
Am open for any other help in both cases. Thank you upfront
2. and the "tell websites not to track me" under Safari - Preference - Privacy.

That box should prevent websites using trackers to log your movements on the Web to benefit advertisers. I have no idea if it does.
Safari can keep your browsing history private. When you turn on private browsing, Safari doesn’t remember the pages you visit, your search history, or your AutoFill information, so your partner cannot see where you have been, but you must also remember to also turn off acceptance of cookies.
In all other respects Private Browsing is not as private as you might think:
http://www.switchingtomac.com/tutorials/how-to-make-safaris-private-browsing-fea ture-actually-private/
http://www.insanely-great.com/news.php?id=9054
and then Apple's own advice from here: http://www.apple.com/pro/tips/privacy_safari.html
"Note that the Private Browsing option does not prevent Safari from collecting cookies (the preference files automatically generated by many websites). The Reset Safari option clears all cookies. If you want to delete only certain ones, choose Preferences from the Safari menu, click the Security tab, and then click Show Cookies. You can select and delete individual cookies from the list that appears. Careful, though — if you’re a frequent web user, this list can be very, very long."
which is itself incomplete, the relevant part being 'If you want to delete only certain ones.
To that end it is useful to have Safari Cookies installed, which is the only cookie manager available for Safari:
http://sweetpproductions.com/safaricookies/
which automatically deletes all cookies not marked as 'favourites' when closing Safari. It does the same for Flash Cookies, but they are subject for themselves:
From this website:
http://machacks.tv/2009/01/27/flushapp-flash-cookie-removal-tool-for-os-x/
For those who do not know about Flash cookies, more properly referred to as Local Shared Objects (LSO), they operate in a similar way to regular browser cookies but are stored outside the purview of your browser, meaning you cannot delete them from within your browser, whether Safari, Firefox, Opera or any other. Typically they are issued from sites or 3rd party sites that contain Adobe Flash content. Since virtually all internet advertising is delivered in Flash, Google/Doudleclick and all other internet advertising companies are sure to be tracking your browsing behavior with Flash cookies. These companies can see you traverse the Internet as you come upon the plethora of sites that contain their embedded advertising. Check out the Wikipedia entry here.
In Mac OS X they are stored in the following location:
/User’s Home Folder/Library/Preferences/Macromedia/Flash Player/#SharedObjects
The settings for the Flash cookies are stored in:
/User’s Home Folder/Library/Preferences/Macromedia/Flash Player/macromedia.com/support/flashplayer/sys
In OS X Local Shared Objects, or Flash Cookies, are appended with a .sol suffix. Flush deletes all the Flash cookies (.sol) and their settings.
Flush can be downloaded from that page.
If you want to retain certain Flash cookies but not others, the excellent add-on for Safari called SafariCookies now includes a setting for automatically deleting flash cookies you don't want to retain, when Safari is shut down, in the same as it deals with ordinary cookies:
http://www.sweetpproductions.com/safaricookies/index.htm
which not only does that but much more equally useful stuff!
This article covers the issue in more depth:
http://www.wired.com/epicenter/2009/08/you-deleted-your-cookies-think-again/
Flash cookies are also known as 'Zombie Cookies' and are used by a number of firms, including Hulu, MTV, and Myspace. Graham Cluley, senior technology consultant at the internet security firm Sophos, told BBC News that the source of the trouble was Adobe Flash itself, which he called "one of the weirdest programs on the planet".
"I think it's highly unlikely that these large companies have abused Flash cookies - which are different from browser cookies - with malicious intent," he said.
"I think it's much more likely that the vast majority of users are simply oblivious to the bizarre way in which Adobe allows them to configure the software."
http://www.bbc.co.uk/news/technology-10787882
And a more recent article:
http://www.nytimes.com/2010/09/21/technology/21cookie.html?_r=3&scp=1&sq=flash&s t=cse
[b]Tracker cookies and the invisible web:[/b]
– tags, web bugs, pixels and beacons that are included on web pages in order to get an idea of your online behavior.
Ghostery tracks the trackers and gives you a roll-call of the ad networks, behavioral data providers, web publishers, and other companies interested in your activity.
http://www.ghostery.com/about
This provides an extension to Safari (also available for other browsers) that shows you what data tracking is active on each web page you visit, and enables you to block them.

Freezes every time it is open on one of our computers (not all).

Similar Messages

Maybe you are looking for