Freight Cost based on postal code from alternative partner (occasional)

Hi SAP experts!
In standard SAP, the freight cost is calculated based on the postal code from WE partner (goods receiver).
But my client have a situation where he uses an one-time customer as a goods receiver. In this cases the freight cost is being calculated wrong, because the SAP uses the tariff zone from goods receiver (WE partner).
Does anybody know if there is a standard partner function to be used in order to consider the zipcode from the one-time customer instead ?
Does anybody knows if there is a standard solution for this issue in SAP?
Exemple:
sold to party - client X - postal code NNN
ship to party - client X - postal code NNN
goods receiver - client Y - postal code AAA
Then the freight must be calculated based on the postal code AAA.
Thanks!
Edited by: Fesuster on Dec 10, 2009 6:10 PM
Edited by: Fesuster on Dec 10, 2009 6:13 PM

Similar Messages

Input Tax code from logical partner LS but not from indiv vendor partner LI

Hi,
Find that tax code at vendor invoice is being taken from logical partner (LS) , but not from the individual vendor partner number (LI) . Bothe the partners are maintained in WE20 , OBCA , OBCD & OMRY.
Like to know the reason / setting to pick up tax code from logical partner (tax rates are same in both cases).
With regards,
Mrinal

Hi Dove,
I think you can use a substitution for field Bank Type at Item Level (TCODE OBBH). This would fill your bank type when you post the document in FI, then you won't have problems in F110.
Hope that helps.Cheers.
Ignacio.

Automatic assignment of Partner Function (Dealer) based on Postal Code?

Hi Experts,
We are realizing a project in the Bathroom-Product Industry. Responsible for the service to the end-clients are authorized dealer. When creating a service ticket the responsible dealer has to be assigned automatically to the ticket on the basis of the postal code where the IBase (the product) is installed.
The process is:
1. The client is calling the Interaction Centre and first the IC Agent has to identify the account and the Installed Base (The installed base contains the postal code where the product of the client is installed) of this account.
2. An Interaction Record is created to record this inbound call.
3. Afterwards a Service Ticket is created as a follow-up Document of the Interaction Record. In the moment of the creation of the Service Ticket the correct dealer has to be assigned automatically to the Service Ticket (as a Partner Function not as a Service Organization) on the basis of the postal code of the installed base.
I have the following question! Which are the steps to assign automatically a Business Partner Function to a Service Ticket? We also need to create a Z-Table with the postal codes for which every dealer is responsible.
Example:
Dealer 1 is responsible for the postal codes: 08040 - 08045 and 08056 - 08059. If a client is calling and his product (Installed Base) is installed in Postal Code 08042 or 08054 the dealer 1 has to be assigned to the service ticket.
I hope I could make myself clear ;-)? Anybody can give me a hint how to do that? What are the basic steps?

Slightly similiar, originally being an R/3 customer before implementing CRM our dealer equated to sales office.
In the CRM Org model (PPOMA_CRM) in the attributes of the sales office we entered the Regions & Postal codes for that dealer (pain in the arse to do) and in CRM the sales office in the org creates a BP.
We used a org rule for the IR record based on country, region, postal code to determine the appropriate sales org, DC, div, and sales office based onthe zip code. We created a custom partner function to represent the partner number of the BP from the org model. Then we configured a custom relationship "ZORG" "Is partner of sales office" and went into the BP master and assigned the actual dealer number as a partner to BP from the org model that = sales office. From that we configured a custom access sequence to pull the actual dealer number from the org model office relationships.
We looked at territory management, but our dealer is an "org BP" and territory management appeared to want to drive to a person BP number.

Freight costing calculation steps & T - codes

Hi experts,
Can any one please help me with the steps involved in freight costing, the scenario is that I am ok with SPRO settings(shipment, shipment cost docs, item cate etc ) but not able to run the entire cycle is easy access ?
regards,
Vineet

REFER LINK IT MAY HELPS U
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/smdisplay.asp?id=669B8C893661492E921899DC6F693C8E&fragID=&packageid=DBBB6D8AA3B382F191E0000F20F64781&context=&iv=
http://sap.ittoolbox.com/groups/technical-functional/sap-log-sd/freight-charges-calculation-1506739

Accessing comapny code from the source file name

Hi,
Iam doing FILE FILE to scenario.
My source file name is XXXX237061606.txt. (XXXX is company code)
My requirement is
Based on company code from the source file name; I need to send the file to the corresponding receiver.
How to retrieve the company code from the source file name?
Thanks,
Hem.

hem chand wrote:>
> Hi Varun,
>
> Could u please provide me detailed procedure to get the company code.
>
> Reg,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
This will get you the File name...TRuncate it to extract company code...
Then have a mapping program with the receivers message type which is persent under SAP BASIS component....
There map to the required receiver by getting the file name above..
Create an int mapping for the above mapping and use that in ur enhanced recv determination

Solution to switch off Postal code checks for countries Denmark and Norway

Client wants to switch off this functionality as the Postal codes in SAP are not updated.
The user should not have any difficulty in keying Postal codes and the City. The system should not check and must save the entries typed by the user
What are the possible ways of doing this? please help
Thanks
Jegadish

Thanks. OY17 for Denmark and Norway is unchecked already
There should definitely be a way in SAP to allow the user to enter the postal code and city
V_005_B is already unchecked
for denmark , sytem picks up postal code from Table -T5M8T.. how do I control the sytem not to check this table?
any help would be highly appreciated
Thanks
Jegadish
Edited by: J Jegadish on Feb 21, 2010 12:01 PM

TP/VS -restrict Carrier Assignment by postal code on LTL's or TL's

Hello,
Has anyone had any luck restricting Carrier Assignment's based on postal code?? It looks like this can only be done with customizations to BADI /SAPAPO/VS_CS_SELECT.
Has anyone tried this using any other method?
Thank-you,
Mike

Hello Mike,
I never needed it, but I think it could be done in EXIT_/SAPAPO/SAPLVS_X_005.
Have you tried doing it the BADI? How did it work out?
Regards,
Pedro Lima
http://apolemia.blogspot.com

Add freight cost in a cross company code scenario using a costing sheet

Dear Forum,
I will like to add freight cost to a material using a costing sheet. The freight percentage is very easy to add and works fine when the cost is added in the company code costing. My problems start when I want to add the freight in the cross-company code costing. I want to setup a cross-company code costing where the freight cost is added to the material in the buying company code and not on the selling company code. The cross-company code costing is setup using special procurement costing keys.
In below costing (CK11N) the procurement costing key is not used.
From the itemization it is shown that purchase info.record 5300067643 is read and the price of 12,97 is determined. There is added 10% in freight coming from the costing sheet.
The freight is shown in the cost component structure as well.
The special procurement type is now changed from ‘20’ to ‘AT´ on the MRP2 screen in the material master. The procurement is now pointing to an internal plant called ‘DCN’.
The costing of material 105050 is now repeated. I get the expected result from changing the procurement key, as I can now see the material is sourced from plant ‘DCN’. DCN is sourcing the material from BJ07, but that is not relevant for the example.
If I now look at the itemization again on the costing in BGA1 I now see that the price is not coming from the info.record. It is the costing in DCN that is used.
I will still like to add the freight cost in BGA1.
How do I add freight cost in BGA1 when I at the same time want to have the costing to be taken from plant DCN?
Please let me know if you need additional information on the customizing setup of the system.
Best regards,
Kim Hjorth Poulsen

Hi Srinu,
Thank You for a prompt feedback.
I have tried to follow Your advise. The special procurement costing key is customized like below.
I have updated the special procurement costing key on the costing 1 view of the material master. When costing the material it is using the special procurement key. This can be seen from the qty. structure tab in CK11N.
It is also costing cross company as intended.
The itemization looks like below.
and the cost component structure looks like below.
Unfortunately the freight is not added in the costing in BGA1.
I noticed that when the costing is made without special procurement key the costing sheet used in the costing is for material components. If the costing is made with the special procurement keys the costing sheet used is for finished and semi-finished materials. The customizing in both of the costing sheets are the same, but only when costing is without the special procurement keys the freight is added.
So unfornutely Your suggestion did not solve the problem.
Best regards,
Kim

Freight cost to be copied from Sales order

Hi
I settling freight cost via third party PO .
In an SO i have setup the freight as service line items , so a Pr will be created for these items subsequently a PO will be created for each line item .
In this PO i need to capture the freight price from the sales order . in other words i want a specific price to flow from SO directly to PO( the price in SO can be manually entered or condition based ).
i tried using a calculation routine for this . I was trying to pass the SO no to the pricing structure but on adding KDAUF and KDPOS to structure KOMP the fields have no value in it.
Can you please help me in passing the sales order no and item no to the structure .
Thanks

Hi ,
I am afraid its a bit complicated ... I have 4 costs involved with a sale of a stock item plant to port freight , sea freight ....etc . All these 4 freights can have different vendors .
the doc flow is like this
SO -> PO -GR (Accrual ) - IV ( Miro ) On miro the actual costs a capture till GR i am using a planned costs
The planned costs are entered in the SO ( generally via contion record) this planned cost should flow into the PO
the conditions you mentioned are SD conditions . I am not looking for a manual . I have to automate the PO creation and possible GR on Goods issue of the actual stock item

Change COPA from costing based to account based

dear friends,
one of our clients is upgrading from 4.6C to ECC 6.00. as part of this upgrade they want to change the COPA from costing based to account based.
Whether this can be done?
If yes, how it can be done and what all precautions need to be take care of?
If no, what are the reasons due to which it should not be done?
thank you for the help.
bajee prasad

Hi,
Let me try to answer to get full points from you. It is a very tricky question.
You can add Account based COPA in addition to Cost based COPA. It is advisable not to delete Cost Based COPA.
Go to Tr. Code KEA0. In the Data Structure Tab, click the change button. Now you can tick the Account based type of PA.
Then go to Environment tab, click the activation button. System will run for some time and both the types of PA gets the environment. These changes are not transportable. You need to do it by opening the system. You can test this in your quality system and then try in Production. I caution that you need to take a backup of the system so as to meet any worst scenario. All the best.
Cheers,

COPA- Cost-Based Chagning KSTAR(Cost Element) from technical to fixed field

In the PA module-
What are the implications with modifying the COPA field catalog in table v_tkef. That is changing a technical field (T) into a fixed characteristic or alternatively modifying the function module rke_external_data_get to allow technical fields to do the same functionality as B, S, U, or V.
B- Basic key figure
D- Dimension (characteristic)
F- Fixed characteristic
K- Key figure
S- Fixed basic key figure
T- Technical field
U- Unit
V- Fixed unit
Details of Issue-
We are using Cost-based COPA and there a requirement to post actual and plan documents by cost element in PA. However Cost element (KSTAR) is a technical field in cost based COPA.
We would like the implications of modifying the field characteristics of KSTAR from technical to Fixed characteristic and setup the KSTAR as a characteristic within the Operating Concern.
Your answers will be helpful in knowing the implications, feasibility and recommendations.
Thanks,
Krishna

Hi,
YOu are making that kink on CJIC where you can assign fix asset to WBS , before doing that you needs to check procured items agaist that particular WBS(on CJI3) & get create fix asset. To my knowledge that is the standard way to link fix asset & WBS rather than having ABAP validation.
Regards,
SL

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

Need to pull postal code in SO from customer master instead on postlcd/city

I want postal code to be pulled in sales order - partners tab for bill to party from customer masater/ under PO box adress.
Currently it is pulling postal code/city from customer master/ under street address.
Is there any standard con-fig available for same ?
please reply,
Thanks and regards,
Sujit

normally not but in asset reporting there seems to be a relation between structure and report-name (not tcode)
go to tcode se11 and search for structures with search term FIAA_SALVTAB* and you'll find some structures.
The last part of the name (RABEST, RABEWG ) is the link to the report (RABEST01, RABEWG01)
hope that helps
Andreas

Restrict access in report based on compnay codes and cost centers

Hi,
We are using a standard report, which is assigend to a Z transaction and assigend to the role.
The report need to be restricted based on the company code and cost center ?
but i could not find any AUTHORITY- CHECK statements in the code ( there is only authority check statement for object G_803J_GJB which has authorization groups and aCTVT field.)
Please let me know what steps need to be followed to restrict the report based on company codes and cost centers.
Thanks for your help in advance.

Thanks all for the quick response.
Steps to be followed:
1) incorporatomg AUTHORITY-CHECK statements for K_KOSTL and F_BKPF_BUK objects in the program.
2) adding the objects as check yes in SU24 for the Z transaction.
and restricting in the role.
The program name is "GP3O4ZGOOF3HA68QMGHF8S7I9ER250".
Please let me know if any more steps need to be followed.
Based on this i have to send a estimate to my client.
Thanks,
Sanketh.

Tax code automatically to Freight costs document created thru VI01

Dear friends,
Could I determine tax code automatically into freight costs document when I create document in VI01 ?
How could I do that ?
This tax code goes to PO when PO created to pay this freight costs ?
best regards,
Ale

Dear Alessandro,
Herewith I attached the link which would help you.
transaction codes..
Please refer to this link. You will get better view. TQ
rgds,
nanthakumar

Freight Cost based on postal code from alternative partner (occasional)

Similar Messages

Maybe you are looking for