Freight in delivery level

Hello Gurus,
This is regarding freight, for one of our Clients-The freight is fixed for a container for the given period and hence manually entered as header condition in Sales order. Hence the Same is freight value is proportionately distributed based on the line item value i.e. quantity* rate. However, for them they have a set of buyers whose order is for more than one container and accordingly freight value multiply by no of containers is entered in header condition. Now when the partial delivery is done from such order the freight component it picks is not the same as freight per container as it picks the line item wise apportioned value. Due to this two different freight bills show different freight amount for the same buyer which is the basic problem.
Any suggestions please from your side, its urgent.
Regards,
Raj.

Hello Laxmipathi,
The requirement i would put it again, my client charges freight on the basis of containers/shipments not on the basis of the quantities i.e. the header level,manual entry for one container (rate per container per period is fixed) for freight should be identified by the system not the item level.i would give one example for this.
if the freight for one container is 200$, if there are two shipments the freight should be 400$. that is ok. but here the problem is depending on the quantitites in the item level in the billing the freight is getting apportioned say for one container it shows 180$ and for one it is showing 220$. This is not satisfying his requirement and although the total freight is ok, the per shipment freight is deviating-220 and 180$ respectively. This should not happend and the system should pick only the per shipment freight. Hope i am clear now.
Can you suggest some solutions for this scenario?
Regards,
Raj.

Similar Messages

REG: Freight condition maintain in delivery level

Hi Gurus,
I want to maintain one freight condition type in delivery level because my customer sometimes picked from my depo & some times we send by our transport.
What should be my approach for this?
can I maintain any pricing procedure at delivery level. If yes then how ?
I created a sales order & tried to put a condition type at delivery level But in item level condition tab is greyed out.
Thanks & regards

In IMG path select Logistic Execution => Shipping => Basic Shipping function => Pricing => Define Pricing Procedure for delivery, assign the pricing procedure to your delivery type and save.
Now include the freight condition in delivery.
thanks
G. Lakshmipathi

ATP Check at Delivery Level instead of Sales Order

In Standard SAP, whenever a sales order is created the ATP check is done and a Goods movement 601 is done for it and gets blocked.
I want that no movement to be carried out at Sales Order Level and should get blocked only at the Delivery level, instead of Sales order.
Can i do this by not defining any movement type in the schedule line category attached to the Item category of the sales order.

hi amit,
u cannot remove MT assignment to SLCAT ,but what you can do is for your checking group and checking rule remove the ATP check relevancy in requirement class defination in spro customising >sd>availibility and TOR.
so that in VOV4 transaction for your SLCAT atp will be deactivated.
only while posting material doc at the time of PGI system would check for availibility and block the goods movement.
reward if helps !!!!!

Stock issue at delivery level

I have a fert having stockable product, MM post 100 tons to storage location.
i have 10 sales order and among them i have created 5 outbond delivery of total qty 40tons.
at schedule line level i have remove the availability check so now its check the availability at outbond delivery level.
now i am creating an outbond delivery with ref to order system prompt me with the warning that only 10 tons of material are available. ????
i have run the mmbe report which shows the 100 tons qty and "schedule for delivery" of 40 tons.
no pgi done of any single delivery so far.
Looking for the gurus experience in this regard as problem is very critical by nature.
Regards,

Hi Piyush,
Please follow the following path :
SPRO | Sales and Distribution | Availability check & Transfer of Requirements | Availability Check | Carry Out Control for Availability Check <--
In the screen select the Availability check and Checking Rule and then Explore it.
There are several options available here, like what kind of stocjk the system should take into account while doing availability check. Here you can select / deselect (X or Y etc) for Sales Order Stock to give you more clear picture for the stock and force the system to take the desired sales order stocks into calculation.
Hope you will get the very clear picture of the scenario configuration settings.
revert Back If it helps you.
Regards,
Manoj K

How to know Packing should be at Delivery level or shipment level?

Hello Experts,
As per my knowledge Packing can be done at delivery level and Shipment level but how to know at material should be packed at what level?
Thanks

Hi Prashant,
Normally we update Matl Grp Pack.Matls field in BASIC DATA 1 of Material Master in Packaging Material Data section.
Based on that details, you can get to know that if this needs to be Packed in What type of Material.
Depending upon your design of Packing you can get to know when should you do the packing.
Regards,
MJ.

Automatic Packing at Delivery level using PACKMODI

Hello Friends,
To activate the automatic packing at delivery level without any packing instruction the PACKMODI enhancement can be used.
Am i Right??
If so Kindly share some inputs how to used this Enhanacemnt
It includes 3 User Exit.
There is no documentation provided for it.
Pl can any one explain its functionality
and how it is helping to packed automatically at delivery level

This is the doucmentation for this enhancement:
The extension PACKMODI contains user exits for automatic packing.
As of Release 4.6C, the packing instruction determination and packing
according to packing instruction functions are available for automated
packing. New user exits in the form of BADIs were created for automated
packing to add data to the packing instruction determination function or
to have the packing instruction that is to be used appear as a default.
The class for automated packing is called BADI_HU_AUTOPACK.
Generally, customer functions after 4.6C only exist in order to be
compatible with previous releases. If you want to implement your own
automated packing logic, you should only do so by way of this new class.
It is not necessary to use packing instructions in order to implement
your own automated packing logic.
Therefore, the previous sample routines for filling in customer
functions no longer exist.
Regards,
ravi

How to get automatically batch no in delivery level?

Dear Expert
How to get automatically batch no in delivery level?
Thanks for Advance

hi,
answering to your question.
please go IN SPRO - LOGISTICS GENERAL - BATCH MANAGEMENT - BATCH DETERMINATION AND BATCH CHECK & you need to CONFIGURE what ever comes in the name of SD.
hope this clears your issue
balajia

Printing mataerial description for batch split material at delivery level

Hi all,
Here i am printing the material description which is maintained in the item level at sales order level.For each material they have maintained two material descripption.I am not able to display the second material description in my export invoice whenever the material is splited into batch ie batch split at delivery level. so please can anyone help me regarding this, I am not able to get it from long time.
Regards,
madhu

Hi,
You can create a two folders for printing the line items, one folder for the normal line-items and the other folder for printing the BAtch-Split Items. you can do this by putting condition as UEPOS NE 0 or UEPOS EQ 0. You can include the Item-Description of the Batch-Splitted item in the Corresponding folder, so when there will be a batchsplit it will get printed.

How to validate Expiry Stock at Outbound Delivery level instead of checking at Goods Issue?

Hello Everyone,
The client wants us to validate Expiry Stock at Outbound Delivery level instead of checking at Goods Issue?
What is the solution for this?
Regards,
Anwar

Hi Moazzam Sir,
I'm sorry for not explaining in detail. Actually, I posted the issue in a hurry. I apologize.
Actually, the client has materials which has expiry date. They use Batch Management. They maintain expiry data (90 Days) in Shelf Life Expiration Date. Their requirement is: User is creating sales order in VA01. Then, he creates Outbound Delivery (OBD), then PGI. They want system not to create OBD, if the material has expired. They want some error message to be thrown whenever user is trying to create OBD for expired stock.
Regards,
Anwar

Want to change pricing in delivery level

hi,
sap gurus,
where is the settings for changing price at delivery and billing levels.
configurations settings plz
regards,
balaji.t
09990019711

Dear Balaji,
First of all at delivery level, pricing will not appear...at billing level you can either do the changes manually by selecting the particular condition and updating it by redetrmination of prices by various logic available as per your requirement or else you can do that automatically by activating in condition type settings.
Reward Points if it helps,
Regards,
N

BOM at delivery level

Hi all,
I have an issue. Is it possible to explode the BOM at delivery level with getting it exploded at sales order level?
Sudha

not get nay response.
Thanks

Why item category re-determined at delivery level

Hi Gurus
I want to know what is the purpose of redetermining item category at delivery level?

First thing to know is that Item Category determination is used only on newly added items and other specific usages like batches, product substitution, etc. It is meant for Deliveries that are not created with reference to a sales order. If you are copying an item from the order and the item category is configured as a Delivery Item category in 0lvp, SAP copies the order item category and does not redetermine it from configuration.
If you are using Product Substitution in the delivery, SAP first copies the higher level item from the Sales Order, then executes Material Determination to bring in the substitution (lower level) items. In this case the higher level item category would be from the order. Redetermined BOMs would follow the same logic as Product substitution.
In short you can redetermine items in delivery when you are using product substitution or add new Items in delivery or using Sales BOMs.
Hope its clear to you now.

Price at delivery level

Dear Experts,
How we can activate the price at delivery level , and wt are the process we should follow?
Regards
Ishikesh

Hi Ishikesh
You can activate the pricing at delivery level if you assign the pricing procedure at delivery level.The path is as follows :
SPRO->Logistics Execution->Shipping->Basic Shipping Functions->Pricing->Define and Assign Pricing Procedure
Regards
Srinath

Credit management at order level ,delivery level and PGI Level.

Hi All,
I have a scnario where in at the order level i want to give a wariniog message ,at the delivery level again a warning message and at the pgi level the system should stop me form doing PGI!kindly specify the settings.
Second Scenario:Error at order level ,delivery level.
Regards
RKM

HI,
First u assign credit group as 03 at pgi level in that particular sales order type in VOV8 document functionaliyt..
If you are using simple credit check then Put error message there in credit check field of VOV8..
In case of automatic credit check then please go to OVA8 t.code there u put reaction as warning message and then status as blocked...
Regards
sankar

BAPI or Function Module to create Handling Unit at the delivery level

Please send me the BAPI / FM details to create Handling Unit at the delivery level.
Thanks

Hi
you can try below BAPI's.
BAPI_HU_CREATE
BAPI_HU_PACK
Hope this helps you.
Rgds,
Kris.

Freight in delivery level

Similar Messages

Maybe you are looking for