Fresh EnterPrise One 9.0 (@MSSQL) installation and security server error
Hello!
I've managed to complete Standalone installation without any issues (Win XP SP2 EN) but I have encountered a problem with first login. After entering the password I'm receiving following message: "waiting for security server" and then: "unable to locate security server". Final one says: "failed to communicate with security server: unable to locate security server" and that's it. I can't log in. I've noticed few things:
jdenet_n.exe is not being started with the system startup - I'm running it manually
I can see it's working on correct port (6012 as entered in JDBJ.ini)
Data Sources seems to be configured fine. I've just switched all words '(local)' and 'localhost' to my PC name in Data Source server name, JDE.ini and JDBJ.ini (at all locations). Someone did advice this step if there are security server issues like mine - it didn't help.
I was following these steps in order to complete the installation, maybe it will help: http://e1tips.com/2011/11/03/jd-edwards-enterpriseone-9-0-standalone-installation/
I've run out of ideas and google is not able to help any more. Have you encountered it before? I will be grateful for any advice!
My best regards
Rafał
Edited by: 932762 on 2012-05-08 04:04
Yes all Oracle9iAS installs will have perl directory.
When you run emctl, please make sure Oracle_HOme variable is set properly
You are running the command as the user who installed Oracle9iAS
The restriction to bring down em during second installs will be addressed in the subsequent releases.
Regards
Pavna Jain
Oracle9iAS Product Management
Similar Messages
-
I would request you to please help fixing the BBM error - Unable to complete Set Up and Temporary Server Error”.
I am using a BB Z10 with Software version 10.1.0.4181 and OS version 10.1.0.4633
Already tried resetting device to Factory Settings and Security Wipe...
Please help.Hey KaranPrabhakar,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Follow the steps in this KB article to resolve the issue: www.blackberry.com/btsc/KB33780
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)! -
3 posts in one on the Leopard "installation and setup" forum
I just posted a topic "Cannot disable trackpad pinch open & close" on the Leopard "installation and setup" forum and the topic was posted 3 times.
I first previewed my post, then posted the message from the preview pane. Interestingly, it took the forum server a very long time to display the preview pane ... and then a very long time (several minutes) to post the message after i clicked the post button.
I did not get impatient and click any buttons twice ... I just waited, and somehow the message got posted 3 times. I can believe I did something inadvertent on my end ... but impatiently hitting the preview and post buttons while waiting was not it.
If someone with power can remove 2 of the 3 repetitions, I'd appreciate it ... I couldn't figure out how to delete them myselffiddleaway wrote:
Thanks. Is there a direct channel to the moderators anyone can use in circumstances like this?
This is it. The Feedback forum is the place to post requests for the Hosts.
I'd like to find out why my posting actions are generating multiple postings.
This has been happening to many people and as Terence mentions seems to be a fault in the forum software. Some have noticed that it occurs when there appears to be a server lag. That is, they'll click the button to post and there will be a long lag in response from the web site, and then even though they never clicked another button, several posts will appear.
It's not anything you did. -
Creating Installer and DAQ-MX: Error Code
Hi,
I found this question was asked a few times back in 2009 and 2007 but the answesr on the forum don't really help me - partially because they say : oh it just worked.
I'm trying to craete my first installer for a LabView project.
It is simply a DAQ assistant for an NI Card. I am trying to move my application from a comptuer with LabView to the one with the card = without labview and I'd rather not install labview on both.
When I include DAQ-MX and the Run Time module I get this error code fro the installer.
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> IB_MSI.lvclass:Build.vi >> IB_MSI.lvclass:Engine_AddProductsToDistribution.vi >> NI_MDF.lvlib:MDFDistBuildList_Close.vi
Loading product deployment information
Loading product deployment information
*** Error: Improper function call or command line argument. (Error code -30)
Type 'DefaultFull' of product 'NI Security Update KB5Q5FJ4QW for the LabVIEW Run-Time Engine 8.2' is not found on the source distribution. Insert the correct source distribution or select another product type.
*** Error Details:
Error in MDF API function: _MDFDistBuildList_Close
Error in MDF:istributionBuildList::AddDependentProducts.
*** End Error Report
Don't quite know what it means
For this one
Type 'DefaultFull' of product 'NI Security Update KB5Q5FJ4QW for the LabVIEW Run-Time Engine 8.2' is not found on the source distribution. Insert the correct source distribution or select another product type.
I think it means that it's not finding the CD from where to get this install wizard? Is that it? Well it is never prompting me for a media where to find this file... so I'm stumped.
Any help would be appreciate, I'll reply on the weekend too!
Thanks!
Also, I<m trying to craete an installer for a .net application. Anything I need to know in particular for that? i.e. where do I include my .dll file? Does that go in the source files?
Thanks.
I've attached the only file in my project that I am trying to install...
Lol.
Solved!
Go to Solution.
Attachments:
Encoder Testing.vi 68 KBHi, the message "...KB5Q5FJ4QW" basically means knowledge base (KB) 5Q5FJ4QW. You can check it here. In summary, the NI Security Update force all users to be administrators, for security purposes, otherwise their applications won't run. The article states that you have two option:
1 - Download and install NI Security Update 5Q5FJ4QW from Drivers and Updates to each machine. OR
2 - After installing the update to a development machine, rebuild an application installer that includes the LabVIEW or LabWindows/CVI Run-Time Engine and run it on each target machine.
I hope this helps
Alejandro | Academic Program Engineer | National Instruments -
Error usingEXE/Building Installer, and cFP .iak error
I built my app and created an .EXE, however when I run it, I get the error(see image error1.jpg) "Cannot Load the browse dialog. Some necsessary components are missing.to correct the problem, reinstall the driver software that is associated with this control." when I try to bring up the Filedpoint browse dialog. This when ra on the computer with LV8.5 full devel. version. If I just run the VI, everything works fine.
Also, when I try to build an installer, I get these errors: (see image)
And then the final question, whenever I shut down labview, I have to open MAX, create a new .iak file, "find devices" for each FP-device and then press "start" so I can see the current values. Then I have to remove the FPdevices from my project, and readd them (new targets and devices), (importing the Fieldpoint configuration does not work). then it all works again untill I close labview. might it be associated with the fact that I cannot save the config file in the project? (see image) when I close the window again, the configpath is gone and when I clock add it says "warning, error saving file".
thanx.
Anders
Message Edited by Tohatsu on 02-13-2008 04:07 AM
Attachments:
error21.JPG 74 KB
config.JPG 58 KB
error11.JPG 43 KBI've just found temporary (let's say) solutions:
About my exe:
test editor for cFP, so I have to allow user to set cFP chanel (let's say DO1), set description, and create table of boolean values.
I want to use cFP "Browse" dialog, but:
there is a VI called "FP get Configuration Info.vi" (Functions>>Measurements I/O>> FieldPoint>> Advanced>>cFP Get Configuration Info)
Set path to *.iak file, define configuration name, communication resource (MAX's cFP name) and device name (l.s: cFPAI-111@3) and operation get item list (long string)
It will get us all input adreses at module cFP-AI-111 and next module and so on...
So user will operate at ring or listbox to select cFP channel what is, hmm... proper solution when he isn't connected to cFP at my exe.
Regards
Mikrobi (Zbigniew St. Sobków)____________________________________________________________
"You can lead a horse to water, but if you can get him to float on his back you've got something." -
Oracle WebCenter Interaction 10.3.0 Installation and start up error
Hi,
I am trying to install the Java version of Oracle WCI 10.3.0 on Windows 7. I know Windows 7 of not officially supported. I was able to successfully install on Windows XP using the installation wizard.
However, for Windows 7 - I can't use installation wizard because when the wizard does not ask me to choose between Java and .NET installations, and by default it selects .NET. So, I had to use silent installation and was able to successfully install.
I am getting the below error (logs from portalserver.log) when I try to start the WebLogic server or run the portal diagnostic tool.
'weblogic.kernel.Default (self-tuning)' com.plumtree.uiinfrastructure.diagnostic.reporter.Reporter FAILED TO INITIALIZE SYSTEM. YOU CANNOT PROGRESS BEYOND THIS POINT. <ptLogMsgEnd>
9-25-2011 20:12:04.664 Error UI_Infrastructure portal.CNU008092S-W7.kota.s [ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)' com.plumtree.uiinfrastructure.application.startup.CheckDevKit Aqualogic Interaction's UI Infrastructure does NOT support this version: The detected Java JDK version is: 1.6.0_22 <ptLogMsgEnd>
Does anyone have seen this type of error and know how to resolve?
Thanks.I have been dealing with this for the past 2 weeks as well. It turns out that the diagnostics, and Weblogic (in my case) think that the portal is trying to run on an unsupported RedHat OS version. I was able to get around this by altering the following 2 files...
I added the parameter: -Dos.name="windows 2003" This tels the OS check that it's running on Windows 2003. I found this little tip in the following link: http://www.function1.com/2009/12/running-wci-10gr3-on-windows-2008/ It talks about Windows 2008, but seems to work for Windows 7 as well.
D:\oracle\Middleware\user_projects\domains\wc_domain\bin\startWebLogic.cmd
if "%WLS_REDIRECT_LOG%"=="" (
echo Starting WLS with line:
echo %JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dos.name="windows 2003" -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS%
) else (
echo Redirecting output from WLS window to %WLS_REDIRECT_LOG%
%JAVA_HOME%\bin\java %JAVA_VM% %MEM_ARGS% -Dos.name="windows 2003" -Dweblogic.Name=%SERVER_NAME% -Djava.security.policy=%WL_HOME%\server\lib\weblogic.policy %JAVA_OPTIONS% %PROXY_SETTINGS% %SERVER_CLASS% >"%WLS_REDIRECT_LOG%" 2>&1
- And -
D:\oracle\wci\ptportal\10.3.0\bin\diagnostic.bat
rem Start the command-line version tool
"%PT_HOME%\%JRE_PATH%\bin\java.exe" -Dos.name="windows 2003" -Xms16m -Xmx512m -cp "%LIB_DIR%\diagrun.jar" com.plumtree.diagtool.diagnostic_net %*
goto end
Also, note that you probably had to install the components in silent mode. This did not install all the services correctly. I was able to get around this by going back into the installation, and choosing the individual components to install. The a link above also mentions the config manager, and how to get this working as well.
Hope this helps!! -
APEX 3.2 Installation - 500 Internal Server Error
Hi All,
I am trying to get APEX 3.2 working on a 10.2.0.5 database, using Embedded PL/SQL Gateway. I have followed the steps from here.
The installation is successful (no errors in install log). However, when I try to access the APEX admin page (http://host:port/apex/apex_admin) for the first time after installation, I get "500 Internal Server Error".
Can somebody help me to figure out what is the issue ?
Following are the details I think are relevant:
SQL> select * from v$version ;
BANNER
Oracle Database 10g Release 10.2.0.5.0 - 64bit Production
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for Linux: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Production
SQL> set lines 171 pages 999 arrays 151 long 10000
SQL> select cast(substr(comp_name, 1, 40) as varchar2(40)) as comp_name, version, status from dba_registry ;
COMP_NAME VERSION STATUS
Oracle Application Express 3.2.0.00.27 VALID
Spatial 10.2.0.5.0 VALID
Oracle interMedia 10.2.0.5.0 VALID
OLAP Catalog 10.2.0.5.0 VALID
Oracle Enterprise Manager 10.2.0.5.0 VALID
Oracle XML Database 10.2.0.5.0 VALID
Oracle Text 10.2.0.5.0 VALID
Oracle Expression Filter 10.2.0.5.0 VALID
Oracle Rules Manager 10.2.0.5.0 VALID
Oracle Workspace Manager 10.2.0.5.0 VALID
Oracle Data Mining 10.2.0.5.0 VALID
Oracle Database Catalog Views 10.2.0.5.0 VALID
Oracle Database Packages and Types 10.2.0.5.0 VALID
JServer JAVA Virtual Machine 10.2.0.5.0 VALID
Oracle XDK 10.2.0.5.0 VALID
Oracle Database Java Packages 10.2.0.5.0 VALID
OLAP Analytic Workspace 10.2.0.5.0 VALID
Oracle OLAP API 10.2.0.5.0 VALID
18 rows selected.
SQL> select dbms_xdb.gethttpport from dual ;
GETHTTPPORT
8080
SQL> select username, account_status from dba_users ;
USERNAME ACCOUNT_STATUS
SYS OPEN
SYSTEM OPEN
DBSNMP OPEN
ANONYMOUS OPEN
APEX_PUBLIC_USER OPEN
SYSMAN EXPIRED
SCOTT EXPIRED
FLOWS_FILES LOCKED
APEX_030200 LOCKED
OUTLN EXPIRED & LOCKED
MGMT_VIEW EXPIRED & LOCKED
MDSYS EXPIRED & LOCKED
ORDSYS EXPIRED & LOCKED
EXFSYS EXPIRED & LOCKED
DMSYS EXPIRED & LOCKED
WMSYS EXPIRED & LOCKED
CTXSYS EXPIRED & LOCKED
XDB EXPIRED & LOCKED
ORDPLUGINS EXPIRED & LOCKED
SI_INFORMTN_SCHEMA EXPIRED & LOCKED
OLAPSYS EXPIRED & LOCKED
ORACLE_OCM EXPIRED & LOCKED
TSMSYS EXPIRED & LOCKED
BI EXPIRED & LOCKED
PM EXPIRED & LOCKED
MDDATA EXPIRED & LOCKED
IX EXPIRED & LOCKED
SH EXPIRED & LOCKED
DIP EXPIRED & LOCKED
OE EXPIRED & LOCKED
HR EXPIRED & LOCKEDLet me know if any more details are needed.
Thanks in advance.Hi Alberto,
A revised version of the APEX Listener has been applied to the apex.oracle.com instance, containing a fix for bug 16210026. So you should now be able to carry out your RESTful Services tests successfully. Please note that the updated version of the APEX Listener release, release 2.0.1, is not yet available for download from OTN but hopefully should be soon. Keep an eye on the APEX Listener OTN page: http://www.oracle.com/technetwork/developer-tools/apex-listener/overview/index.html.
Regards,
Hilary -
Win7 and now Server Error [2007]: "Database connection information not acce
I support a 8.3.x server with Insight plugin in use. This has worked for some time now with WinXP. The issue comes into play when the company is upgrading users to Win7 stations. First, the zero-admin (download and install setup launch) is failing. The Install window opens but doesn't seem to be able to complete. Then, when we do get the plugin installed via the manual download and install, we then reach a point where the bqy will not connect with the Server Error [2007]: "Database connection information not accessible. Processing is disabled." If we proceed from there, we'll get Server Error [6] PUB_NullArgument errors and empty "Show Values" limit boxes. So it's like the .oce information is not received on the Win7 platform - it still works fine on WinXP installations.
And, I know it can work, as the PC Support personnel were able to get this working on one PC.
Any suggestions?
Thanks,
KeithI assume that there has been no reply to this thread. The problem still persists, with intermittent success. I hope that someone can shed some light onto the Server Error [2007]: "Database connection information not accessible. Processing is disables." message.
Thanks again,
Keith -
It looks like this error is pretty common around here.
Anyway, I've encountered my Cloud Synching freezing up at about 1.35GB worth of actual content. I wouldnt mind uploading more but Im not able because of the Server Error pause. This would be very helpful in the realm of After Effects projects where my footage is bundled into one folder (though there are many sub-folders to keep things organized).
I've tried deleting Preference files and installing/reinstalling with no luck. An Adobe Rep in online chat brought me here and I've checked the list of files that have odd file names and what-not. What gives, Adobe? Are there any other fixes for this and is there anyone out there that can help me work across multiple platforms?Thanks for responding. Here are the errors Im getting.
My file sync went up to 1.35GB and paused. It does not go any further. This isn't particularly helpful since Im using After Effects and we've collected our files on Clouds before without problem for a team of different artists.
I myself am using a Mac system, an older model of a MacBook Pro, using Mavericks (which has it's own issues).
This is happening with the Desktop client. I have tried using the Web Page before but I can only do this manually, one folder at a time and even then, uploads are slow (which would be forgiveable) but still unsuccessful. -
LabView Crashing and compile server error.
Hi,
I'm having some errors when I compile code for my FPGA (PXI-7831R). I am using LabView 8.2.1.
Sometimes labView crashes completely and sometimes it comes up with a compile server error.
My code contains 3 VI's. The first send sends digital output and reads digital input 10 times and then called another VI to save these results. The second VI repeats the first VI 10 times.
When the first VI is compiled on its own it works (including the saving data VI which saves it to a FIFO) but when the second VI is compiled, that is when it errors.
I have attached the compile server errors and the screen dumps of when labView crashes.
Can anyone suggest what I am doing wrong?
Thanks.ok. Let me try and make my problem a little clearer....
I have now combined all the VI's into one.
It is supposed to write to the digital output and read from the digital outputs 10times at a rate of 10us and store the data to the FIFO. This process is then repeated at a rate of 80ms for 8 times.
I have attached a word document with an explanation on the error.
Attachments:
lvlog07-26-07-12-04-50.txt 3 KB
Problem Explaination.doc 61 KB
f623_appcompat.txt 93 KB -
How do I fix the web and wiki server - error reading settings?
Hello,
I upgraded to OS X Mountain Lion and installed the OS X Server. The Wiki pane has the error message "Error Reading Settings". The Websites pane looks fine, but when I click on "View Server Website", I get the webpage that simply says "Server Error". (I am wondering if these are interrelated, which is why I put them in the same discussion.) I will note that the admin tools must have changed since trying to follow the discussions for previous versions of the Server leads to paths that are not present. Any suggestions on what to try would be most appreciated. Many thanks!Hello. Unfortunately, serveradmin is indeed one of those paths/tools that are no longer present in the new version of OS X Server. Either that, or it is renamed to something new that I am not aware of. However, doing a ps -A | grep -i postgres, I get the below. I am not sure if this really means postgres is running or not. Looking in system.log file, I am noticing a weird error (attached). Any thoughts on this would be most appreciated. Many thanks!
--------- ps -A | grep -i postgres -------
3709 ?? 0:01.67 /Applications/Server.app/Contents/ServerRoot/usr/bin/postgres_real -D /Library/Server/PostgreSQL/Data -c listen_addresses= -c log_connections=on -c log_directory=/Library/Logs/PostgreSQL -c log_filename=PostgreSQL.log -c log_lock_waits=on -c log_statement=ddl -c log_line_prefix=%t -c logging_collector=on -c unix_socket_directory=/var/pgsql_socket -c unix_socket_group=_postgres -c unix_socket_permissions=0770
3724 ?? 0:00.79 postgres: logger process
3726 ?? 0:02.08 postgres: writer process
3727 ?? 0:01.45 postgres: wal writer process
3728 ?? 0:02.25 postgres: autovacuum launcher process
3729 ?? 0:05.38 postgres: stats collector process
6591 ?? 0:00.01 postgres: caldav caldav [local] idle
20614 ttys000 0:00.00 grep -i postgres
---------- system.log postgres error? --------------
Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:81 73290180 +0ms] PID 2655 in /tmp/wikiadmin-is-running.pid is stale, removing
Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:86 73290180 +0ms] Failed to remove /tmp/wikiadmin-is-running.pid: Permission deniedJul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local wikiadmin[20810]: [main.m:99 73290180 +0ms] wikiadmin is already running (pid=2655), check /tmp/wikiadmin-is-running.pidJul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [CSConnectionPool:141 9be8000 +162ms] Schema is STILL out of date (0 < 69) after launching wikiadmin, update failed! collabd will refuse to run until this is fixed.Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [CSConnectionPool:152 9be8000 +0ms] Could not open a connection to Postgres. Please make sure it is running and has the correct access.Jul 25 21:33:32 toshiro-k-ohsumis-macbook-pro.local collabd[8654]: [PGCConnection:148 9be8000 +4ms] Error in TXN: Error executing query [INSERT INTO entity_attrs (entity_uid_fk, attrs_bin) VALUES ($1, $2)]: ERROR: bind message supplies 0 parameters, but prepared statement "" requires 2 ( 0 CoreFoundation 0x00007fff8d8ca716 __exceptionPreprocess + 198 1 libobjc.A.dylib 0x00007fff8e824470 objc_exception_throw + 43
2 PostgreSQLClient 0x00000001099929ae -[PGC
Connection checkResultOK:forSQL:] + 360
3 PostgreSQLClient 0x00000001099935bd -[PGC
Connection executeUpdate:withParams:] + 879
4 CSService 0x00000001098e9298 -[CSContentService insertEntityAttributesRow:inTable:withGUID:] + 275
5 CSService 0x00000001098ea1fc __57-[CSContentService _internalCreateEntity:asUser:withACL:]_block_invoke_0 + 586
6 PostgreSQLClient 0x00000001099925a2 -[PGCConnection transactionInBlock:onError:] + 62
7 CSService 0x00000001098e9f3f -[CSContentService _internalCreateEntity:asUser:withACL:] + 771
8 CSService 0x000000010990b3e5 __88-[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:]_block_inv oke_0 + 898
9 PostgreSQLClient 0x00000001099925a2 -[PGCConnection transactionInBlock:onError:] + 62
10 CSService 0x000000010990b004 -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:andLanguage:] + 237
11 CSService 0x000000010990b5f1 -[CSContentService createEntitiesFromTemplate:withData:andVariables:andACL:] + 126
12 CSService 0x000000010990ba6b -[CSContentService createEntitiesFromTemplate:] + 124
13 CSService 0x000000010990cd84 __24-[CSContentService init]_block_invoke_02420 + 225
14 PostgreSQLClient 0x00000001099925f7 -[PGCConnection transactionInBlock:onError:] + 147
15 CSService 0x000000010990c4f4 -[CSContentService init] + 789
16 CSService 0x00000001098bb11b -[CSLocalServiceLocator allocateService:] + 191
17 CSService 0x00000001098bb1c7 -[CSLocalServiceLocator locateService:] + 108
18 CSService 0x00000001098c1cf7 -[CSServiceBase locateService:] + 70
19 CSService 0x00000001098d3f55 __42-[CSSessionService unauthenticatedSession]_block_invoke_0 + 35
20 CSService 0x00000001098c26d7 -[CSServiceBase disableRefObjsInBlock:] + 279
21 CSService 0x00000001098d3e13 -[CSSessionService unauthenticatedSession] + 200
22 CSService 0x00000001098d452f -[CSSessionService currentOrNewSession] + 59
23 CSService 0x00000001098d58a5 -[CSSessionService enterMagicalAuthRealm] + 51
24 CoreFoundation 0x00007fff8d8bdcac __invoking___ + 140
25 CoreFoundation 0x00007fff8d8bdb47 -[NSInvocation invoke] + 263
26 CSService 0x00000001098bc50f -[CSServiceDispatcher executeRequest:asPartOfBatch:usingServiceImpl:] + 1507
27 CSService 0x00000001098bc9be -[CSServiceDispatcher executeRequest:] + 114
28 collabd 0x0000000109851393 +[CSServiceDispatchHTTPRouter routeServiceRequest:response:] + 705
29 collabd 0x000000010984fe37 __53-[CSRoutingHTTPConnection httpResponseForMethod:URI:]_block_invoke_0 + 73
30 collabd 0x000000010985286c __56-[CSHTTPBackgroundResponse initWithConnection:andBlock:]_block_invoke_0 + 185
31 libdispatch.dylib 0x00007fff82b49f3d _dispatch_call_block_and_release + 15
32 libdispatch.dylib 0x00007fff82b460fa _dispatch_client_callout + 8
33 libdispatch.dylib 0x00007fff82b4723e _dispatch_worker_thread2 + 304
34 libsystem_c.dylib 0x00007fff8cc0cceb _pthread_wqthread + 404
35 libsystem_c.dylib 0x00007fff8cbf71b1 start_wqthread + 13 -
JAZN Security and Internal Server Error
Hi,
I have set up two projects in a workspace. One is the demo application callerInfo and the other one is my own project. The callerInfo works as expected, but my own project throws an Internal Server Error. In my own project I have mimicked the project settings, web.xml, and orion-web settings of the callerInfo app. If I remove the security role mapping in orion-web my application runs as expected, but obviously I cant log in when hitting the protected web resource.
What should I be checking?Even more info:
I have now fused the two projects into one. The callerInfo index.html works. My main.jsp throws the same error as before. I removed all dynamic content and it still threw an error. Then I changed it to an html file and then it displayed ok. Similarly I changed index.html to index.jsp and hey presto it threw the same error as all other jsp. The problem dissapears completely when I remove the security role mapping in orion-web so it is JAZN related. In addition it all works when deploying to external server.
This is most bizzarre and quite frustrating. Any help of ideas of whats going on would be much appreciated.
Jakob -
Sharepoint web application was unable and show error 403 forbidden and 503 server errors
Hi
i some times loose connection to sharepoint site where i am working with,i was just run some powershell scripts to update
a filed value in a document library only
and it some times show in browser 403 Forbidden error and some times 503 server error
when i check in event viewer i got this below errors
adilThat particular 'error' is OK. It just means that a non-Farm Admin service account doesn't have the rights to run that sproc. Normal with best practice security in mind.
You may want to check the IIS logs to see what the
subcode for the 403/503 errors are.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Customize the 404 and 500 server error pages
how can I customize the 404 (http 404 error) and 500
(internal server error) server error pages?
Where are the corresponding pages?
thanks for your help
CelestinoTheoretically, quite easily:
The default error pages can be overriden by any html/jsp/servlet resource. You have
only to map the error codes with your own error pages within the Deployment Descriptor
file (web.xml).
See the documentation for details.
HTH
Ales
"Celestino" <[email protected]> wrote:
>
how can I customize the 404 (http 404 error) and 500
(internal server error) server error pages?
Where are the corresponding pages?
thanks for your help
Celestino -
Browser and secured server communication
I want to know that How the Browser communicates with the
secured server ?
please Explain in detail with Example (if possible)
Thanks In advancehi
yes nothing is returned from the browser
request from the browser means
whenever u type say,www.google.co.in in your browser
the following type of request will go to the proxy server,after getting the request the proxy server will check for the host address and then it connects to the webserver and get the response and send it back to the browser.
for google page the request is
GET http://www.google.co.in/ HTTP/1.1
Host: www.google.co.in
Accept: text/html, application/vnd.wap.xhtml+xml, application/xhtml+xml, text/css, multipart/mixed, text/vnd.wap.wml, application/vnd.wap.wmlc, application/vnd.wap.wmlscriptc, application/java-archive, application/java, application/x-java-archive, text/vnd.sun.j2me.app-descriptor, application/vnd.met.ticket, application/x-wallet-appl.user-data-provision, application/vnd.oma.drm.message, application/vnd.oma.drm.content, application/vnd.wap.mms-message, application/vnd.wap.sic, text/x-co-desc, application/vnd.oma.dd+xml, */*
Accept-Charset: iso-8859-1, utf-8, iso-10646-ucs-2; q=0.6
Accept-Encoding: gzip,deflate,identity;q=0.9
Accept-Language: en
Cookie: PREF=ID=dc8dc6e63dab6e09:TM=1156324791:LM=1156324791:S=FgovcdMV93Mm4Li7
Cookie2: $Version="1"
User-Agent: Nokia6630/4.06.0 Series60/2.6 Profile/MIDP-2.0 Configuration/CLDC-1.1
x-wap-profile: "http://nds1.nds.nokia.com/uaprof/N6630r100.xml"
in the code u have given the value of the host is http: only
Maybe you are looking for
-
How can I sync my work outlook calendar to a separate 'work' ICloud calendar?
Hello everyone, I have been trying to work out how to keep my 'work' calendar separate to my 'family' calendar. I have an Outlook calendar at work, and would really like to have it shown in my iCloud as a work calendar, and keep it separate from my f
-
Lost sound devices now blue screen of death when updating creative drivers.
I have an XPS with windows 7, dont k now what the sound card is, I have factory installed software for Creative X something extreme, and Realtex. Now I had been trying to get sound via an optical cable to an AV amp with no success. I had tried disabl
-
Dear Experts, in some when we create outbound delivery with reference purchase order by T-Code VL10D, few article qty miss in outbound delivery why this happening has coming pls give the solution .... and that will allow manually qty fill after exte
-
Air Port Extreme base not recognized...
I have an AirPort Extreme base station that MacOS X (10.3) refuses to recognize. I've tried everything I can think of (swapped cables, installed newest versions of software, ran software update on the Mac) but nothing works. AirPort isn't even listed
-
Background contrast on Apps screen & blinking green light
Newbie here. The Apps screen had a blue background but is now white and I am unable to read the titles of the icons at the bottom of the screen. How can I get rid of the white background and return to the blue contrast? Additionally the green indic