FRM-10205 Menu not found

Running Forms 10g application server 10g.
I have created a menu and named it in the forms property menu
module. I have placed the mmx in the same directory as the fmx.
When i run the application the first form has no menu attached
to it and works correctly, it then calls the second form using
call_form (formname, hide, do_replace); When the form loads the message
frm-10205 appears, the form loads without a menu.
Paul

Was this thread Menu not found of any help to you ?

Similar Messages

Frm-10205 Menu MAIN not found

Hi, i have a KBW_MENU.mmx. i'm trying to add the menu to a new form (MAIN), i have change the 'menu module' to the path of the KBW_MENU.mmx and set the initial menu to MAIN. But i'm getting this error 'frm-10205 Menu MAIN not found'. i'm running 10g release 2.

1) do you really have a kbw_menu.mmx in the path or just a kbw_menu.mmb. You must have a mmx.
2) Did you try just leaving the initial menu property blank?
3) The initial menu must be blank or a menu within kbw_menu.mmx.
4) You most likely dont have a "main" menu in the kbw_menu.mmx file. Do you have a "main_menu"?
5) Open up the mmb and use the exact name of one of the menus within.
From the help...
Initial Menu
Specifies the name of the individual menu in the menu module that Oracle Forms should use as the main, or top-level, menu for this invocation. End users cannot navigate above the menu specified as the starting menu. By default, the starting menu is the menu named in the menu module property, Main Menu. The Initial Menu property allows you to override the Main Menu property.
Message was edited by:
Mark Reichman

MENU NOT FOUND 66000-27

Hi All,
I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27.
I am using the add-on version of 1.0.0.1. And I have also the FULL license for Crystal Report Basic 2008 for SAP Bsuiness One of Business Object.
Please also note that the above error which I am getting if only in a particular company / database. When I am loading the add-on in any other database then everything is working fine and the Menu of Manage Crystal Report is working.
Please advise for a solution as how to get rid of it.
Regards,
Kawish

Hi Kawish
Please visit the following link:
Activate menus Gross Profit
Hope this helps!!
Regards
Sourashree

Menu not found

Dear experts,
I am still not able to find any solution for the error of ''MENU NOT FOUND 66000-27" in "Manage Crystal Report"
The above error which I am getting if only in a particular company / database.
Regards,
Paolo

I have had the same problem for over 6 hrs now. So I decided to step through the source code. This is my finding.
The Problem is coming from this line in public bool FillSourceData()
sModuleString = AppObject.Menus.Item(Rs["ModuleUID"].ToString().Trim()).String;
This is because the reports being referenced in the database have been moved or deleted.
The fix is to wrap the content of the while (Rs.Read()) // Not (Rs.EOF) in a try... catch
Like this
while (Rs.Read()) // Not (Rs.EOF)
try
It now works OK.
Edited by: Olajide Aregbesola on Mar 25, 2010 5:00 AM

MENU NOT FOUND [ 66000-27] in Manage Crystal Report

Hi All,
I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27.
Please note that earlier this menu used to open by which I used to add the reports but now for the last 4-5 days this menu is not opening.
Also would like to know in Account setup how to create ext table when the table already exist.
Regards,
Kawish

Hi,
I am still not able to find any solution for the error of ''MENU NOT FOUND [ 66000-27] in Manage Crystal Report''.
I am using the add-on version of 1.0.0.1. And I have also the FULL license for Crystal Report 2008 of Business Object.
Please also note that the above error which I am getting if only in a particular company / database. When I am loading the add-on in any other database then everything is working fine and the Menu of Manage Crystal Report is working.
Please advise for a solution as how to get rid of it.
Regards,
Kawish

The object R3MAIN in library *LIBL type *MENU not found.

Hello SAP Gurus,
Currently we are experiencing a log in issue in our dev AS400 server. Log in is successful but we are not able to proceed.
Checking the joblog, we found out that "The object R3MAIN in library *LIBL type *MENU not found" and we dont have any idea who change this settings. Can you assist how we can return the object R3MAIN and what is the exact library should we place it.
kharlos.

Hi TJ,
I would strongly suggest, to open an OSS ticket with BC-OP-AS4 as there are some more problems in the current BS7 SR1 upgrade kit. Only with such a message, SAP will be able to fix these issues.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de

Menu not Found Error

Hi Experts,
I working on an add on ,i have registered the ard of that add on . The problem is that when i try to connect ard it gives the error "Menu Not Found".Some time it works fine and it also works fine when i restart the sap.
So kindly Suggest me the proper solution
Thanks
Amit

Dear Amit,
I faced the same problem in 8.81 PL6.
Dear Gordon,
tou can try run add on, and the add on create sub folder, Log off and login to same company (not close the application), then run the add on again, then you will have the message.
nd.Q

[SOLVED] Openbox-menu saying Menu not found...

Hello all,
I installed Arch with Openbox. For the menu, I want to use openbox-menu to see my Applications.
In menu.xml, I put the line:
<menu execute="openbox-menu" id="desktop-app-menu" label="Applications"/>
But when I point it in the menu, I get:
Menu not found. Please specify a menu specification file.
I get the same result in Terminal either as a user or as root.
These are the "menu" packages I have installed:
[philippe@phil-bureau ~]$ pacman -Qs menu
local/dmenu-xft 4.5-1
Dynamic X menu - with xft support
local/gnome-menus 3.2.0.1-1
GNOME menu specifications
local/gnome-menus2 3.0.1-1
GNOME menu specifications
local/libdbusmenu-qt 0.9.0-2
A library that provides a Qt implementation of the DBusMenu spec
local/lxmenu-data 0.1.2-1 (lxde)
freedesktop.org desktop menus for LXDE
local/menu-cache 0.3.2-1 (lxde)
Caches to speed up freedesktop.org's application menus use.
local/obmenu 1.0-9
Openbox menu editor.
local/openbox-menu 0.3.6.6-1
Dynamic XDG menu for openbox
local/openbox-xdgmenu 0.3-2
fast xdg-menu converter to xml-pipe-menu
Any help/ideas/suggestions are welcome!
Thanks
Philippe
Last edited by Philippe1 (2012-02-17 16:30:22)

Hey guys, thanks for the quick response!
Openbox-menu comes from AUR and the menu.xml is a copy of my Archbang installation. And yes, openbox-menu works like a charm on Archbang. So what am I missing?
Here is the menu.xml:
<?xml version="1.0" encoding="utf-8"?>
<openbox_menu xmlns="http://openbox.org/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://openbox.org/ file:///usr/share/openbox/menu.xsd">
<menu id="root-menu" label="Openbox 3.5">
<item label="Fichiers">
<action name="Execute">
<execute>
nautilus
</execute>
</action>
</item>
<item label="Internet">
<action name="Execute">
<execute>
chromium
</execute>
</action>
</item>
<item label="Minitube">
<action name="Execute">
<execute>
minitube
</execute>
</action>
</item>
<item label="Jeux de cartes">
<action name="Execute">
<execute>
pysol
</execute>
</action>
</item>
<item label="LibreOffice Writer">
<action name="Execute">
<execute>
libreoffice -writer
</execute>
</action>
</item>
<item label="LibreOffice Calc">
<action name="Execute">
<execute>
libreoffice -calc
</execute>
</action>
</item>
<item label="Terminal">
<action name="Execute">
<execute>
sakura
</execute>
</action>
</item>
<separator/>
<menu execute="openbox-menu" id="desktop-app-menu" label="Applications"/>
<menu execute="~/.config/openbox/pipemenus/obpipemenu-places ~/" id="places" label="Places"/>
<menu execute="~/.config/openbox/pipemenus/obrecent.sh ~/" id="recent" label="Recent Files"/>
<menu id="Preferences" label="Preferences">
<menu id="root-menu-90523" label="Conky Config">
<item label="Edit .conkyrc">
<action name="Execute">
<execute>
leafpad ~/.conkyrc
</execute>
</action>
</item>
<item label="Restart Conky">
<action name="Execute">
<execute>
conkywonky
</execute>
</action>
</item>
</menu>
<menu id="root-menu-891528" label="Eye Candy">
<item label="No effects">
<action name="Execute">
<execute>
~/.config/openbox/scripts/xcompmgr.sh unset
</execute>
</action>
</item>
<item label="Transparency">
<action name="Execute">
<execute>
~/.config/openbox/scripts/xcompmgr.sh set
</execute>
</action>
</item>
<item label="Transparency, fading">
<action name="Execute">
<execute>
~/.config/openbox/scripts/xcompmgr.sh setshaded
</execute>
</action>
</item>
<item label="Transparency, fading shadows">
<action name="Execute">
<execute>
~/.config/openbox/scripts/xcompmgr.sh setshadowshade
</execute>
</action>
</item>
</menu>
<menu id="root-menu-525118" label="Openbox Config">
<item label="Edit autostart">
<action name="Execute">
<execute>
leafpad ~/.config/openbox/autostart
</execute>
</action>
</item>
<item label="GUI Menu Editor">
<action name="Execute">
<execute>
obmenu
</execute>
</action>
</item>
<item label="GUI Config Tool">
<action name="Execute">
<execute>
obconf
</execute>
</action>
</item>
<item label="Key Editor">
<action name="Execute">
<execute>
obkey
</execute>
</action>
</item>
<item label="Reconfigure">
<action name="Reconfigure"/>
</item>
<item label="Restart">
<action name="Restart"/>
</item>
</menu>
<menu id="root-menu-23433" label="Take Screenshot">
<item label="Now">
<action name="Execute">
<execute>
scrot '%Y-%m-%d--%s_$wx$h_scrot.png' -e 'mv $f ~/ & geeqie ~/$f'
</execute>
</action>
</item>
<item label="In 5 Seconds...">
<action name="Execute">
<execute>
scrot -d 5 '%Y-%m-%d--%s_$wx$h_scrot.png' -e 'mv $f ~/ & geeqie ~/$f'
</execute>
</action>
</item>
<item label="In 10 Seconds...">
<action name="Execute">
<execute>
scrot -d 10 '%Y-%m-%d--%s_$wx$h_scrot.png' -e 'mv $f ~/ & geeqie ~/$f'
</execute>
</action>
</item>
<item label="Selected Area... (click & drag mouse)">
<action name="Execute">
<execute>
scrot -s '%Y-%m-%d--%s_$wx$h_scrot.png' -e 'mv $f ~/ & geeqie ~/$f'
</execute>
</action>
</item>
</menu>
<menu id="root-menu-571948" label="tint2 config">
<item label="Edit tint2rc">
<action name="Execute">
<execute>
leafpad ~/.config/tint2/tint2rc
</execute>
</action>
</item>
<item label="Tint Wizard">
<action name="Execute">
<execute>
tintwizard.py
</execute>
</action>
</item>
</menu>
<item label="Edit /etc/rc.conf">
<action name="Execute">
<execute>
sudo leafpad /etc/rc.conf
</execute>
</action>
</item>
<item label="Input Device Preferences">
<action name="Execute">
<execute>
lxinput
</execute>
</action>
</item>
<item label="Screen Resolution">
<action name="Execute">
<execute>
arandr
</execute>
</action>
</item>
<item label="User Interface Settings">
<action name="Execute">
<execute>
lxappearance
</execute>
</action>
</item>
<item label="Wallpaper">
<action name="Execute">
<execute>
nitrogen
</execute>
</action>
</item>
</menu>
<separator/>
<item label="Exit">
<action name="Execute">
<execute>
oblogout
</execute>
</action>
</item>
</menu>
</openbox_menu>
Thanks again!

Menu not found (FRM-10205)

Hi, people!!
I'm deploying a forms application with a menu. I've compiled both form and menu modules. In spite of that, when I try to run the form, I get the follow error message:
Menu [menu_file_name.mmx] not found
The file exists and the path is specified in the search path. What's wrong?
Any help would be thankfully appreciated.

Hi,
Even I have experienced the same problem. The problem is very clearly with the PATH u have specified.
Check for SPACES and UNDERSCORES in the path u have given. Even if there is a space or an underscore that is present / missing in the path, then u get the error.
Hope this suffices.
Rgds,
Santhosh

Menu Not Found during Runtime

Dear Colleague,
My customer attempted to run the new version of the Oracle 9i Forms application that I developed for him. He successfully started the initial form, but the referenced menu file within the initial form is not found. There is no path included in the reference to the menu module within the property sheet, only the file name of the menu.
Currently, the MMX-file is in the same directory as the initial FMX-file that references the MMX-file.
Which parameter or configuration file must one change for the menu file to be found and used within the context of Oracle 9i AS?
Best regards,
Randy

If you're running a Unix/Linux server; please keep in mind filenames are case-sensitive! So if in the FMB a menu is attached with the name "MyMenu" and you have MYMENU.MMX on the filesystem it will not be found! You can check what the filename is in the FMB by converting it to FMT.
Tim

Bookmark menu not found?

Hi, I have searched these talks and, of course the manual but can not locate the bookmarks folder anywhere. I have not had any problem with creating bookmarks. I simply can not locate them to return to those sites. I have no interest in putting them all on the bar yet have not located any of the bookmarks I created. I even tried to search for them and get a standard google Internet web page. While the sites can be found somewhere on that first page it lists a lot of other sites. The time it sometimes takes to locate the site I am looking for is simply crazy. I personal believe it should not take fifteen ninety minutes to return to a bookmarked site. Any help on what should and may even be such a simple action will be greatly appreciated!

The orange Firefox menu button is hidden by default on Windows XP. 
You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar via View > Toolbars, also accessible via Firefox > Options. 
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the menu bar is hidden and you need access to it.
* https://support.mozilla.com/kb/how-do-i-use-bookmarks

Content Exchange menu not found in KM

Hi All
I am trying to import home_area_content_templates_fullupdate.zip file. As per documentation of Importing an Offline Package it is saying there will be a menu Content Exchange under Content Management. I could not find Content Exchange menu. I have already activated Content Exchange Service.
Please Help.
Thanks in advance .
Raktim
Message was edited by: Raktim Banerjee

Hi Stefan
Thanks for ur reply.
I can see Content Management menu . Under that I can see
Form-Based Publishing
Global Services
Protocols
Repository Filters
Repository Managers
Repository Services
User Interface
Utilities
connection pools
But I cannot see Content Exchange Menu.
I have assigned ContentManager role to thr user also.
Thanks
Raktim

Custom Run-Time Menu Not Found in User.lib

Our Instrument Run-Time Menus are getting lost.
This is because we have some computers that are 32 bit and the code is located at
C:\Program Files\National Instruments\LabVIEW 2011\user.lib\InstrumentDrivers
Other computers are 64 bit and the code is located at
C:\Program Files (x86)\National Instruments\LabVIEW 2011\user.lib\InstrumentDrivers
The directories are thus slightly different because of how Windows treats the location of 32bit LabVIEW running on a 64 bit machine.
Does anybody have an easy work around?

I'm confused by "lost". Do you mean when you build the path to your custom menu within your vi or are running some executable? Is this code you have written? If so, then maybe a simple check when initializing the paths might work.
If it is as simple as just having to decide between those two directories, then I would just check to see if the win64 bit directory exist, using "file directory info" vi. If it doesn't' exist you should get an error, then check to see if the other path exists, it should hopefully, and use that.
Not sure if this is what you need.

ESS Menu not found in SPRO

Hi all,
We have ECC 6.0 EHP4 NW7.01 installed, and I can't find ESS menu in SPRO under 'Personnel Management'
Can anybody help me?
Thanks in advance!!
Regadrs.
Urtzi

Hi,
Check the help document to see which Business Functions are to be activated to see the Content under SPRO.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/03/67653566d44428b2bcfab4975bcdf7/frameset.htm
Hope this helps.
Cheers-
Pramod

"File not found" error when I try to render an animated menu (on mac) Encore CS4

I'm making a dvd with at least 2 animated menus. It means that I have a 1 movie in the background of each menu. Over my background, I have 3 thumbnail buttons which contain a small piece of movie animated movie too. When I try to to view my menus, in order to see the animation in the background and in the thumbnails I need to render the animation through File - Render - Motion menus.
The problem is that it works for the first menu but then when I continue my navigation to the second menu that has animation in background and thumbnails too, if I choose Render Motion menus,after 3/4 of the rendering it says "file not found" even if all the files are well in place in their folders.
Does anyone would have an idea of how to resolve this stupid problem that prevents me to burn my project on a DVD since the same errors will appear during the burning process (I use a mac with Encore CS4). Is it a bug? What are the solutions? Thanks for answering.
Steven.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

FRM-10205 Menu not found

Similar Messages

Maybe you are looking for