From external: block all domains except one MAPPINGS file?

Here's the problem...
I have an old domain that my mailserver is still authoritive for. We receive mail through a mail ISP cluster, in that sense that our internal mailserver does not have any MX-records associated with it. All MX-records point to the ISP.
We have recently changed domain name because of a merger.
I am still rewriting all RCPT TO: [user]@olddomain.com to RCPT TO: [user]@newdomain.com in imta config.
I now want to end that rewriting using the mappings file for all except but one domain.
So the end result should be:
MAIL FROM: all domains -> [user]@olddomain.com REJECT $Netc......
but!
MAIL FROM: specific domain -> [user]@olddomain.com should still be passed on to the IMTA.
I have used SEND_ACCESS before as a method of blocking mail, but this is specific... I want to block the whole world except one originating domain (for the old domain)
Does anyone have a working example of this and could you provide it for me?
TIA
Eli

Jay :-)
We have reinstalled iPlanet Messaging Server 5.2 on Windows Server using all new servername FQDN and all new domain hosting for.
FQDN: mail.new-domain.local
Mail authoritive for: new-domain.com
Server is located on the LAN and gets it's mail from an ISP using mailkick.
Server is actually not aware (neither in MX, nor in LDAP records) of the old domain.
The only way the server gets it's mail is through smart-hosting. It just works and acts as a new server. Mail for the old-domain.com (organization) is accepted because I rewrite the domain part of the old-domain.com to new-domain.com
old-domain.com $U%[email protected]
Server accepts mail from all sending/origination domains only for the TO: new-domain.com it is authoritive for.
Now here is the catch... I want to disable the TO: domain-rewriting, because people need to use the new-domain when addressing us.
There is still only ONE organization out there that needs to address the old-domain.com because of X.509 encrypted mail. This is the only domain I will do rewriting for.
Hence is why I was looking at the SEND_ACCESS
It has some ways of blocking part of a sender or address part of a enveloppe based on wildcards etc....
Yet only blocking....
How do I block the whole world except that old organization we still do business with. Mail for the old domain is also delivered through the same mailkick by ISP.
So if whole world -> [some user]@old-domain.com REJECT
and
single organization -> [some user]@old-domain.com ACCEPT and continue REWRITING
Hope I shed a bit more light on the subject....
Eli

Similar Messages

  • Sophos Endpoint security: Block all websites except one

    I've been trying to find out how to block all websites except one, in an end user, by creating a policy in the Sophos Enterprise Console. I can see an option - Full web control but it requires an appliance. My question is, it is possible block all websites except one with Sophos? I appreciate if anybody knows, and can tell me how. I have downloaded the trial version of Sophos. If it's possible, I'll try Sophos ES for a year, for the end users and servers. 
    This topic first appeared in the Spiceworks Community

    Team Folder in the past was managed by administrators. Administrator can create, edit, delete team folders. The team folder can be published to a group of users, including Active Directory group. It is very convenient to share files and folders with a group of users in the same team. As team groups bigger, it may not be convenient for administrator to manage all the team folders. So it makes sense for administrator to assign some users to be able to manage team folder that they own themselves. Role Manager It usually starts with the role manager by creating a role with Add/Edit/Delete permissions and assign it to users or Active Directory groups. Manage Team Folder The user who are in the private team folder role will be able to manage team folders without seeing all the team folders from everyone. Here is a YouTube Video about...

  • Block all URL except one or two in WRSV4400N

    Hi,
         I have a WRSV4400N router and I need to block all URL except one or two. Can I do it with or whitout TrendMicro ProtectLink??
    Thank you

    Hi Axondigital,
    Your english is very good.  I did say "check and see"  in my earlier post and not here is a solution.
    To answer your original question , the answer is NO.
    URL filtering is a limitation you will find in a product like the WRVS4400N, but you will not find that limitation in the new and more powerful SA520 which has an URL allowed and blocked list.
    My advice would be, evaluate trendmico protectlink if you wish and see what you think.  send a email to the following address to get a evaluation license;
    [email protected]
    But try a SA500,  if that customer  really needs a low cost, but capable router that requires URL allowed list.
    regards Dave

  • Win 8.1 domain workstation. Block all access, except for a fews users/groups and domain controller information/date.

    Hi!
    Win 8.1 pro, domain workstation. How Block all access, except for a fews users/groups and domain controller information/date.
    Nuance:
    From domain AD is locked Workstation Firewall "Domain profile" edit.
    Possible?
    cenubit

    Hi GirtsR,
    I am not sure the command to use the SID to accomplish what you want to achieve, if you only know the SID, you could take use Powershell to find the related information, more information, please check:
    Working with SIDs
    And a similar thread for reference:
    How to find user/group known only SID
    More reference: Default local groups.
    Best regards
    Michael Shao
    TechNet Community Support

  • Moved some Crystal Reports from 8.5 to 10. They all work except one.

    Moved some Crystal Reports from 8.5 to 10. They all work except one.
    The report runs, then stops.
    It brings up the Formula Workshop - Format Formula Editor - Suppress (No Drill-Down)
    Highlights one of the Formula Fields, which is in used as part of record selection, then stops

    Go to [http://service.sap.com]
    In that go to SAP Support Portal ->Help & support tab ->Report a Product Error
    You would have to supply Customer number and User ID and it would allow you to create a case (incident).
    You can also call on our CIC numbers if you face any issues and they would be able assist you in creating an Incident.
    Americas : 1 866 8907686 (toll-free)
    support.bosapamerica@ sap.com (Remove the space)
    APJ: 1800 613459 (toll-free)
    support.bosapasia@ sap.com
    EMEA: 08081012181 (toll-free)
    support.bosapemea@ sap.com
    Hope that helps!!
    Regards,
    Shweta

  • TS1702 Just bought  iPad Air. All apps from previous iPad transferred over except one game. How can I get the app on this iPad? It does not even show up in purchased apps.

    Just bought an iPad Air. All apps from previous iPad transferred over except one. The app does not appear in my purchased apps. How can I move this app over?

    Some apps do indeed come off the market.  The vendor stops selling or supporting them for whatever reason.
    That is likely what happened.
    See if the app is still in the App Store.  If so, you can download it.  If not, it is gone.

  • How to Set Up Content Blocker to Block All Sites Except Those That Are Listed?

    How to Set Up Content Blocker to Block All Sites Except Those That Are Listed by Firefox?

    One other item I thought I would pass along...
    I noticed that the NVG589 gets terribly confused if a device behind it isn't setup properly first to be a static address.
    Here's the behavior: Say you have a router of your own and you intend to give it one of the addresses from your static IP block. You decide to set it up first and don't make the changes initially in the 589 to force it to be a static IP of some kind-- whether in the private or the public block. You configure the router in this case with DHCP. Your router starts handing out addresses in its own IP range however your configured it.
    But look what the 589 thinks is happening: it sees the DHCP client name associated with the same MAC address changing constantly. It makes entries for each different client name in its device list, sometimes aging out, sometimes not.
    Now trying to save the private IP will result in a "missing data" error. Worse, trying to change things to a public static IP will result in similar messages about the IP being in the wrong range.
    The same issue can also occur if the device was setup statically in the private range and you try to change it to a public static IP.
    The only way to fix this:
    1) If you intend to advertise the router on an IP from your static block, disconnect all devices from the router and the RG, except for the router you want to setup. Wait for the RG to see them as "offline" in the device list. Alternatively, if you intend to setup another device or server on a Static IP, make sure it is the only device connected to the RG.
    2) Switch the IP allocation to "Public"
    3) Renew the lease on the device
    4) Go into the IP Allocation page and fix the IP to one of the public static IPs from your pool
    5) Reconnect all devices.
    Generally, the best practice is to setup each static IP device before connecting any others to the RG.

  • Block all countries but one?

    Our management suddenly decided that some parts of our servlet based web application should only be visible from one country, and visitors from other countries should not be able to see that part of our web application. I have absolutely no idea how to do this. Can somebody point me in the right direction? What would be the general strategy to disallow access to a part of our web application for all countries except one? What is the typical approach to realize something like this?

    [http://www.blockacountry.com/]
    Yes, it's just that easy (to find at least). However, it is not a bullet proof solution. Someone can spoof their IP or use an anonymizer or proxy through the legal country.
    - Saish

  • Need all members except one

    We need a report in FRS 11.1.2.1 (for planning app) with all account members except one member (say XYZ), this dim is in page dim. Since we want the report to be dynamic, we tried few things:
    1. Tried using All Accounts AND NOT XYZ
    2. Created a UDA with all account members except XYZ. Used UDA in the report and it does not show up the right result. It shows only one page for each account.
    Any suggestions will be helpful either in any of the above options or something new.
    Thanks

    Hi
    What exactly is the requirement? Do you want a total of all accounts excluding one or do you want to display all accounts excluding one?
    What you are describing with the Page dimension is the way that the page is intended to work. If you want:
    1. Subtotal of all accounts except one
    a. Either add this member as a dyn calc member in the outline and call it directly or
    b. Call the overall total and the account you wish to exclude and use a formula in the report to subtract one from the other
    2. Display all accounts except one
    a. Move what you have on the page of the report into rows (I suspect it may be too large to fit in columns)
    Hope this helps
    Stuart

  • Question about import all tables except one

    I have exported all tables for a user. While importing I want to import all tables except one table whose name I know. How do I do this? Example: If I have tables: Employee, address, salary that I have exported. While importing I want to import only Employee and address. How do I do this. The database I have exported contains over 20 tables.

    I don't think it is possible at all, you just need to explicitly specify all the tables.
    If you really don't want to include the single table, then you can import all the tables and drop the desired one.
    hare krishna
    Alok

  • How to  extracting data in all objects except one object?

    hi experts,
    when we are trying extracting(load) data, it should be updated in all objects except one object,what is the procedure, pl anybody can explain step by step procedure.
    thanks & regards
    vijay

    Hi vijay
    By object do you mean infoObject ?..if it is then you can set no update in update rule and do not map in transfer rule...
    Thanks
    Tripple k

  • Cisco 5510 blocking all websites except a few

    Hello:
    I see many post about how to block a single website, but I want to do the opposite. I would like to block all website except for a handful of them. Does anyone have any example configs?

    Hi,
    Yes you should be able to:
    http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
    Of course, you will need to create some soft of regex that will deny all the websites such as *.com, but first of course permit the websites you want.
    Another option will be using FQDN acls (Only supported on version 8.4.2 and higher) Here is the example.
    https://supportforums.cisco.com/docs/DOC-17014
    Cheers,
    Mike

  • Block All Websites except for a few

    I have a Linksys WRT54G router. I just got my 7 and 9 year old kids a computer. I need to block all websites except for about 5 - 10 websites that my wife and I let them visit. I don't think I can do this with the WRT54G router, but does anyone know how I can do it.
    Thanks,
    Skooter Columbo

    unfortunately, on wrt54g routers, you can only block and not allow websites.
    and to block websites, you can only put up to 4 websites which is what you do not want to do. cause you said you need to block all websites except for 5-10 sites.

  • Recently got a new computer and installed itunes from external drive - all music shows up in the library, however when i click on a song i receive this message "the song could not be used because the original file could not be found".  What do i do?

    I recently got a new computer and installed itunes from which had been saved onto an external drive - all music shows up in the library, however when I click on a song I receive this message "the song "abc" could not be used because the original file could not be found".  What can I do?

    I was given the option to locate the file where the song is held. If so select "locate" and direct it to the folder / file where the song is and open it. itunes then will give you the option to use this process to update all of your library. OK that as this will do it automatically instead of doing them one by one. I hope this helps.
    Martin

  • Setup write access for all descendants except one

    Hi,
    I'd like to give a write access to all descendants of a member, except one.
    I thought I could simply give WRITE too all descendants, and set a NONE on the member I didn't want to give access.
    That should work according to the Planning documentation :
    Inheriting Access Permissions
    Inheritance may determine the user or group’s access permissions. You can specify an attribute
    that causes the children or descendants of that member to inherit its access permissions. Access
    permissions assigned to members take precedence over inherited access permissions. You can
    include or exclude the member from the access permissions setting.
    However, after I set it up this way, the inherited WRITE takes precedence over the NONE set up on the member.
    Am I facing a bug, or is there an error in the documentation, or am I really missing something ?
    I am working with 11.1.2.1, EPMA application.
    Thanks,
    JM

    If you set write accesss to descendants and then set none to one of the members then the none access should take precedence.
    This statement should be true "Access permissions assigned to members take precedence over inherited access permissions."
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • Cannot install or deinstall upgrade to version 5

    I am running Firefox 4.01 on my desktop with Windows 7 Ultimate. Almost everyday Firefox comes up with a "This is embarrassing..." message. more or less independently of what sites I have visited. Don't you think it is time you did something about th

  • Can't download a patch for Camera raw files for Photoshop Elements 9.

    Can't open RAW files from a Canon 60D camera on Photoshop Elements 9. Went online and suggested solution is to download a patch for PE9, which has been done. Tried to open program and message says Adobe Application manager download required. This don

  • Send e-mail in HTML-format with attachment

    Does function SO_OBJECT_SEND allow to send e-mail with attachment? Does function SO_DOCUMENT_SEND_API1 allow to send e-mail in HTML format?

  • HT1420 I am trying to "authorize my computer."

    support says to go to the store menu and choose "authorize my computer." cant find it. help?

  • OCI & thin drivers

    I am using Oracle8i and I find two drivers are available for usage in JDBC applications: OCI8 and thin What is the distinction between OCI and thin dirvers? To which type of dirver does these two belong to? When should I use which dirver? A detailed