From which table can we get the status of sales order
hi
from which table can we get the status of sales order
Hi
Check the Table <b>VBUK for HEADER level status</b> of Sales order
and <b>VBUP for Item level statuses</b>
enter VBELN = Sales order and VBTYP = C for sales orders
as VBUK and VBUP stores all Sales documents like deliveries, Invoices, quotations, contracts etc
<b>Reward points for useful Answers</b>
Regards
Anji
Message was edited by:
Anji Reddy Vangala
Similar Messages
-
Which table i will get the status of the User decision Result status
Hi Experts
Which table i will get the status of the User decision Result status
(eg : Inspection completion forced )
This i can see in QA33Hi jag
Ok fine actually it is not storing in any table...these r all text symols...if u see this program MQEVAF22...U EILL GET SOME IDEA
CALL FUNCTION 'QAST_STATUS_CHECK'
EXPORTING
I_OBJNR = QALS-OBJNR
I_STATUS = C_STATUS_PAKO
EXCEPTIONS
STATUS_NOT_ACTIV = 01.
IF SY-SUBRC NE C_RC01.
MOVE C_KREUZ TO L_STAT_PAKO.
ELSE.
CLEAR L_STAT_PAKO.
ENDIF.
Prüfen, ob Los bestandsrelevant ist
MOVE RQEVA-STAT_BERF TO L_STAT_BERF.
Prüfen, ob Los auf SKIP sitzt
CALL FUNCTION 'QAST_STATUS_CHECK'
EXPORTING
I_OBJNR = QALS-OBJNR
I_STATUS = C_STATUS_SKIP
EXCEPTIONS
STATUS_NOT_ACTIV = 01.
IF SY-SUBRC NE C_RC01.
MOVE C_KREUZ TO L_STAT_SKIP.
ELSE.
CLEAR L_STAT_SKIP.
ENDIF.
IF QALS-STAT35 >< C_KREUZ.
VE noch nicht getroffen !
IF ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 )
AND QALS-STAT13 = C_PPKTTYP-PHPR
AND G_ANZAHL_PPKT_LOEVM > CI_0.
Es wurden physische Proben storniert ! PRIORITÄT 1A
MOVE TEXT-I17 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I17'.
ELSEIF ( QALS-STAT14 = C_KREUZ AND QALS-OFFENNLZMK > CI_0 )
OR ( L_STAT_PAKO = C_KREUZ
AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ) ).
Prüfung wurde abgebrochen ! PRIORITÄT 1
MOVE TEXT-I04 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I04'.
MOVE C_KREUZ TO L_ICON.
ELSEIF G_ANZ_RUECK_MK > 0.
Es wurden Merkmale rückgewiesen ! PRIORITÄT 2
MOVE TEXT-I01 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I01'.
MOVE C_KREUZ TO L_ICON.
ELSEIF QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 .
IF QALS-OFFENNLZMK > CI_0.
Es sind nicht alle Merkmale abgeschlossen ! PRIORITÄT 3
MOVE TEXT-I02 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I02'.
ELSEIF QALS-OFFEN_LZMK > CI_0.
MOVE TEXT-I05 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I05'.
ENDIF.
ELSEIF QALS-WERK NE QALS-WERKVORG.
Prüflosmenge wurde umgelagert auf anderes Werk Priorität 4
MOVE TEXT-I16 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I16'.
ELSEIF QALS-LMENGEIST > QALS-LOSMENGE.
Istmenge im Los größer als Losmenge! Priorität 5
MOVE TEXT-I15 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I15'.
ELSEIF L_STAT_SKIP = C_KREUZ.
Prüfverzicht: Los ist geskippt ! PRIORITÄT 6
MOVE TEXT-I03 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I03'.
ENDIF.
ELSE.
VE getroffen bzw. eingetragen
IF ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 )
AND QALS-STAT13 = C_PPKTTYP-PHPR
AND G_ANZAHL_PPKT_LOEVM > CI_0.
Es wurden physische Proben storniert ! PRIORITÄT 1A
MOVE TEXT-I17 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I17'.
ELSEIF ( QALS-STAT14 = C_KREUZ AND QALS-OFFENNLZMK > CI_0 )
OR ( L_STAT_PAKO = C_KREUZ
AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ) ).
Prüfung wurde abgebrochen ! PRIORITÄT 1
MOVE TEXT-I04 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I04'.
MOVE C_KREUZ TO L_ICON.
ELSEIF L_STAT_PAKO EQ SPACE
AND ( QALS-OFFENNLZMK > CI_0 OR QALS-OFFEN_LZMK > CI_0 ).
Es sind noch Langzeitmerkmale zu bearbeiten ! PRIORITÄT 2
MOVE TEXT-I05 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I05'.
ELSEIF L_STAT_BERF = C_KREUZ AND QALS-STAT34 EQ SPACE.
Los ist bestandsmäßig noch nicht entlastet ! PRIORITÄT 3
MOVE TEXT-I06 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I06'.
ELSEIF QALS-WERK NE QALS-WERKVORG.
Prüflosmenge wurde umgelagert auf anderes Werk Priorität 4
MOVE TEXT-I16 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I16'.
ELSEIF QALS-LMENGEIST > QALS-LOSMENGE.
Istmenge im Los größer als Losmenge! Priorität 5
MOVE TEXT-I15 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I15'.
ELSEIF L_STAT_SKIP = C_KREUZ.
Prüfverzicht: Los ist geskippt ! PRIORITÄT 6
MOVE TEXT-I03 TO RQEVA-INFO_LINE. L_TEXT_NR = 'I03'.
ENDIF.
ENDIF. -
The position of the worker, from which table can I get?
Hi,
Whether a person with a given pernr, how can I know whether he is a manager or an employee etc.
Which table and which field of this table.
Thanks.Hi,
To get the position for a person you need to go to table PA0001 table (PLANS field).
Once you get the position, to check whether that position is Manager's position
You need to go to table HRP1001 and check whether is there any entry exist for the position with relationship 'B002' (SUBTY field), if entry exists then the position is manager's position. The all the entries in SOBID fields are subordinate position to the managers position.
Hope this helps,
Shrinivas -
From which table could i get the process code and corresponding FM.
Thanks!
TMSG1 Logical Messages and Process Codes in Outb. Procg
TMSG2 Logical Messages and Process Codes in Inb. Procg
Also check other tables :
TEDE and TEDE1
Another table to look at is EDIFCT. It contains the link between message type and processing function module.
Thanks
Seshu -
Which table could i get the information of Sales org. and DC relationship?
Thanks!
And could you tell in what way could i found the corresponding table corresponding to any SPRO transactions??
ThanksHi,
In the SPRO setting Press F1 and check technical details,you will find the corresponding table.
Second way is if you do any changes in settings,then the request which is getting generated...in that request you can find the table name as well
Reward points if useful
Regards,
Amrish Purohit -
From which table could i get all the Variants of a ABAP program?
Hi,
From which table could i get all the Variants name which belong to a specific ABAP program?
Thanks.Hi Hoo,
You can get the variants of a ABAB Program from table <b>VARID</b>. Give the report name to the VARID-REPORT field and you will the list of variants for this report under field VARID-VARIANT and VARID-ENAME is the user who created the variant.
Otherwise, You can use the function module RM_GET_VARIANTS_4_REPORT_USER to get the variants of a report
Thanks,
Vinay -
From which table could i get all the Variants of a specific ABAP program?
Hi,
From which table could i get all the Variants name which belong to a specific ABAP program?
Thanks.Hi,
Check the table starting with TVAR*.
Regards,
Atish -
Hello everybody out there.
Which way can I get the screensaver from Lion get back on Mountain Lion??
Thanks
malibu0978Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though
-
From which table can I display PGI (material and quantity)for a spesific cu
Dear gurus,
From which table can I display PGI (material and quantity)for a spesific customer order?
Thanks in advanceHI
PGI and material quantity can be available in MSEG table
for this enter the sales order number in KDAUF or* MAT_KDAUF* fields in MSEG table
Also try with LIPS delivery item table and LIKP table
regards
SAP SD
Edited by: sapkpit_sd on Jul 22, 2010 8:14 AM -
Which Table, can I find the class and characteristic assigned to equipment.
Hi all,
I have assigned a characteristc to a class.
And assigned this class to an equipment.
Now in which table can i find the class assigned to this equipment.
What is the logic to find the class and characteristic.
Thanks in advance.
PiyushHi,
As per above post, you can find classes. To find characteristics, Give EQUNR value in OBJEK field in AUSP table & get the ATINN value.
Give ATINN value in ATINN field in CABN table & get ATNAM field value.
In AUSP table, you can get the values against each characteristics as well.
Regards,
Maheswaran.
Edited by: Maheswaran.K on Apr 19, 2011 9:28 AM -
In which tables can I find the sd texts in the material register?
Hi,
In which tables can I find the sd texts in the material register?
Thanks.Hi,
The texts are stored in tables STXH , STXL etc. But it is not possible to fetch the details directly from the tables. You have to use the function module READ_TEXT where you have pass the parameters Text ID, Language, object as material number etc to fetch the text.
You can take the help of an ABAPer to create a program for this. -
In which transaction can I change the status of a field?
Hi,
In which transaction can I change the status of a field?
In transaction FB75 (enter customer credit memo) on the Details TAB, the G/L account is defaulted.
How can I change this field, so that I can enter a new G/L account?
Thank you for your feeback.
Kind regards,
Lindahi Linda,
this is the reconciliation account of the customer. As another commenter already pointed out, you can change this in the master data of the customer (tcode FD02, Company code data).
From Release 4.7 (and up) there is another option: in the master data of this G/L account you can set up, if you can change this G/L by posting. This is a checkbox in the G/L master data (tcode FS00). If you tick it, you'll be able to change this reconciliation account it in FB75 (and elswhere by customer postings).
"I see that in transaction Fd02, the reconc. account is also grey (cannot be changed)."
You have to check the field status settings in SPRO!
hope this helps
ec -
Which Table i will Get the Name of Receipt Recipient in FBCJ
Hi Experts
Which Table i will Get the Name of Receipt Recipient in FBCJ
Transaction Code : FBCJ
Technical name : Name of Receipt Recipient
Field Name : BP_NAME
But it is not stored in TCJ_POSITIONS table
Regards
JagadishHi,
Please check in TCJ_DOCUMENTS table, field name BP_NAME.
Regards
Radhika -
In which table can I find the name and surname for a username ?
Hello,
I search the table with the master data of users. Specially I search the table where I can find the
name, surname for a user.
In which table can I find the name and surname for a username ?
Thanx in AdvanceHello everybody,
thank you for the helpful informations.
thank you very much
with kind regards
cetoman -
In which table can I find the tcode, username and data of login ?
Hello,
I would like to know which tcode and when specific users use.
And therefore I have question:
In which table can I find the the tcode, username and data and time of login ?
Rgds StenwaDepending on the version of SAP you are using, you can trace this via:
1. STAD.
2. SM20. But proper config should be maintained via SM19.
Please read this documentation by SAP for details: [http://help.sap.com/saphelp_nw70/helpdata/EN/8a/a8b5386f64b555e10000009b38f8cf/content.htm]
BR,
Suhas
Edited by: Suhas Saha on Apr 22, 2010 6:45 PM
Maybe you are looking for
-
Can you have more than one 1phone account on the same itunes program?
my boyfriend has bought a iphone but is unable to activate it using his itunes account on his computer as he needs a new mouse. can he sign in to his account using the itunes on my laptop so he can activate his phone and access his account?
-
Bluetooth USB dongle stopped working
I have an unbranded USB bluetooth dongle. I'm running osx 10.4.11 on a G4 Dual Optical. The dongle worked fine, plug and play and I have used it to Sync my Sony Ericsson mobile using iSync. I do not leave it plugged in as I use it on my work PC too.
-
I have a page with spry tabbed panels, in CS3, and I need to display inline HTML content (data tables) within the tabs, but am having trouble finding a lightbox type application that does more than images. I've used Highslide in the past, but it seem
-
Installing Oracle 10g on Linux/Unixwhat
for installing the Oracle 10g on Red Hat Linux 4 and Sun Solaris 10, how can I 1.Initialization Parameters: determine the amount of physical memory; I need to change the default setting from 40% to 60% when I change the value I got an error then when
-
I have been a long time user of mac, this is the first time I've come across this problem. Symptoms: 1. All my applications seem to have lost its memory of previous settings: e.g. whenever I start Skype, iTunes etc, it keeps asking me to read conditi