From which tables the data is coming in to transaction fields, how to find?
Hi abapers,
I am new to abap,
I have some data in one transaction.
I want to know that one particular record in a field from which table the data is coming, how do i know?
How to find that for the transaction is haveing header and item tables?
How to find that what are tables used for that transaction?
by presseing f1 on a field we can find table name or structure name along with field name of that particular field?
If structrure means how to find that field from which table it is coming?
I found table name for some of the fields like this by pressing f1,double clicking on structure name?
but some fields in another transaction does not showing the table names only structure it is showing?
Moderator Message: Basic Question. Please search.
Edited by: kishan P on Nov 13, 2010 3:20 PM
hi ,
you can do that by Transation st05
where you have to 1) activate trace ,
2) execute transaction
3) deactivate trace after transaction complete
4) display trace
there you can find all step by step flow from where data has been retirved and tables also .
if you dont no take help from Basis People .
Regards
Deepak.
Similar Messages
-
From which table the ship to address is picked up in SRM
Hi,
Can anyone tell me From which table the ship to address is picked up in SRM?
BR
SairamHi,
See the foll related thread:
Table name for - ship to address.
BR,
Disha.
<b>Pls reward points for useful answers.</b> -
From which table Posting date is shown in Coois Confirmation list.
Dear gurus
Can you tell me that in t-code coois in confirmation list there is a posting date. can you tell me from which table that posting date is coming
regards
SaadI think its from table AFRU fieldname BUDAT.
-
From which table, the current number is taken for a WM TO?
Dear Experts,
Kindly let me know when a transfer order is created in LT01, how the TO number is assigned?
Before assigning a number, from which table it takes the current number?
regards
shettyHi,
r u able to see the current no in LT01 tcode ,if it is means pls let me know the field of that.
and check with the below tables also,
LAGP
LECMOFF
LEIN
LINK
LINP
LINV
LL01
LL02
thanks,
sankar m -
Hi,
We are executing a report. Fine. It is based on Multiprovider. Can we identity from which infoprovider that data belobs to?? I mean dynamically can we find out??
Regards,
MurthyMy point was that your question has no clarity, forget the joke. When asked what do you mean by 'dynamically' you reply ' I think you are right....in web report....'. Honestly, do you have any clarity on what you want? Say you have a layout to define with your Chars and KFs, what do you want to see there? Right click and the KFs disaggregate in a popup? Have a free char of infoprovider to drill down to? What? Post that and then expect clear answers.
To get an answer there has to be a question. Humor is one way of expressing frustration with vague questions. -
From which table the structure field is getting populated
Hi all,
I've a requirement to run the report for process orders when AFVGD-FLG_PURS(Indicator:purchase order exist)is active. I'm not able to find from which transparent table I can populate data in this flag value.
I've tried "where-used list" to get which table is having this field, but I didn't get any table name.
Is there any way to get it?
Thanks in advance.
Regards,
BhavanaHi,
another possible solution is to do a "trace".
1.- Go to transaction is ST05.
2.- Then activate the trace.
3.- Afterwards go to the transaction where the structure field is.
4.- And then return to ST05 to deactivate the trace.
5.- Last watch carefully the log of the trace.
Here you will find all the tables and select´s involved in the process.
Best regards. -
How Vlan identifies from which port the data has come ?
Hi ,
We know that more number of ports can be configured to same vlan. How vlan distinguish between the ports ? How vlan knows from which port this frame has come ? in tagging we add the vlan id to the frame and not any other info ? little confused on how this haapens ??Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
A VLAN doesn't really distinguish between ports. A switch does, though, "remember" (for some time) the source MAC as frames enter its ports.
Tagged frames may contain more than VLAN ID, such as L2 CoS. -
How to find from which table we r fetching the data
Hi friends,
i got a requirement to design a query,in my transfer rules i check the info object related to the fiels.but in my crm the field name is different.
how to find from which table the field is fetched........
please tell me........
Regards
sridathDear Sridath,
In ST05 switch on the SQL Trace.
Goto RSA3.
Give your DataSource name > Execute
Goto ST05...Switch OFF the Trace
Analyze the Trace file
Gives you details about the fields and Tables from where you are fetching.
OR
Goto LBWE
Find your DataSource > Maintenance > Display mode
In right side window...expand ALL list box...
Exclude MC and take other words...they are the Source Tables.
Regards,
Ramkumar. -
From which table Gross amount can be picked
Hi,
From which tables the gross amount of line item of sales order can be picked.
Please give me the table names to fetch gross amount.
Regards,
KrishnaHi,
Select the condition record number from VBAP i.e. KNUMH and pass this condition record number and condition type PR00 (Ctype PR00 is for gross value kindly check ) to KONV . in KONV KBETR would give the value .
Regards,
Raghavendra -
In which tables the GL account group field KTOKS
Hi,
From which tables the GL account group field KTOKS get
Regards,
Sivahi
DKOKS Open Item Account Balance Au
DSKOS Balance Audit Trail
SKA1 G/L Account Master (Chart of
T077S G/L account groups
T077Z Account Group Names (Table T
regds
laks. -
How to find that from which table data is coming in datasource?
Hi friends
I want to find that from which tables data is coming into datasource 2LIS_04_P_COMP,2LIS_04_P_MATNR..
I have searched in forums.. I also have checked in sap.help.. but I didnt get any tablename in field "Table of origin"..
Please tell me how can I find that data is coming from which table into these datasources..
I dont want name of the setup tables.. I want name of the original tables (in R/3)which has data..
Regards
SwatiHi......
For data source 2LIS_04_P_COMP............MCAFKO, MCAFPO, MCCOMP are the R3 communication structures...........
Check these commonication Structure in SE11............I think u will get the required information........
2LIS_04_P_MATNR is Material View from PP/PP-PI ..........check this..........
http://help.sap.com/saphelp_nw70/helpdata/EN/88/7fc73c0c52085be10000000a114084/frameset.htm
Check this each field in SE11....from there try to find out these fields belongs to which table..........as I hav explained u in another thread..........
May be the extractor is using these fields from different tables.....
Regards,
Debjani........ -
How to find from which table we got the data
Hi friends ,
How can we find from which table we r getting data in the datasource.
I am getting data from crm system.based on that we created cubes and dsos.
we have only one datasource.now i need to know from which table we pull the data?
can any one give the procedure
Thanks in advance........
sridathHi,
Datasource / tables in the source system
Go to RSA2 (DS Repository) in your source system and display your source system.
If Extraction Method is 'V' - you are lucky and you see table name where data is taken from.
If it is F* - function module is used, and you have to go thru its code to see all the tables it uses and logic how data is
processed.
Ext. Meth Short text
V Transparent Table or DB View
D Fixed Domain Value
F1 Function Module (Complete Interface)
F2 Function Module (Simple Interface)
Q Extraction Using ABAP Query
A DataSource Append
OR
Since you have the extract structure and the extractor, you must have some transaction like the Extractor Checker RSA3. If so
then execute ST05, switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Hope this helps.
Thanks,
JituK -
To Get List of Tables from Database which has the data 'AAAA' - T-SQL Query
Hi,
I have a database "Adventureworks", I need to get list of tables, which has the data 'AAAA' in their rows.
Is there any optimised or simple way to do this task?
Any T-SQL Query Available
--- Thanks in advance..You can refer the same below URL provided by Praveen:
https://gallery.technet.microsoft.com/scriptcenter/c0c57332-8624-48c0-b4c3-5b31fe641c58
It has the SQL SP - "SP_SearchTables". You can pass parameters the way you want and get the expected output.
-- Search for 'bike' instead of 'AAAA'
Use AdventureWorks2012
EXEC SP_SearchTables @Tablenames = '%', @SearchStr = '%bike%'
-Vaibhav Chaudhari -
How to check from which table data is picking by datasource 0CDCY_ACT_ATTR
Hi Experts,
Could you please help me in finding out of the table from which datasource 0CDCY_ACT_ATTR is extracting.
As per my knowledge is should be extract from tables(infotypes) HRP5135 - 5141.If i am wrong please correct me.
Issue : My extractor(0cdcy_ACT_ATTR) is bringing wrong ACT_TYPE (Eg :5010) where as in table HRP5141 for that particular OBJID it is 9180( different).
Please help me why my extractor is bringing ACT_TYPE 5010.
This standard datasource and using Function Module : RCF_BIW_GET_ACTIVITY, How can i check from which table it is picking the data
Thanks in Advanve
SreeHi Sree,
In RSA3 on the first screen, you have the option to start debugging by marking the debug check box, once you put all the selections, click on execute and it will go to debug mode, then keep on pressing F5. It will debug your code line by line, then you can check for all the select statements.
Or once the debugging is started you will have the option to put break point on all the select statements in one shot, you can get in touch with your ABAP team.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 24, 2011 8:20 PM -
How to Find out the from which table we can get the following fields?
The following fields are from invoice data
How to know or from which table we get the following fields:
Header Details:
Manifest:, Finance Control #:, Alternate SID:, Carrier:, Container/Trailer #:, Hazmat Code:, Harmonizing Code, Freight Forwarder, Fiscal Rep., Ship From, Notify Party
Item Details:
VAT/Tax Rate %, VAT/Tax Amount, Measurements, Net Weight, Gross Weight
thanksDear Krishnama
Place your mouse on the required fields and press F1. A box with header Performance Assistant will appear in front of you where you select "Technical information" (icon like hammer and spanner).
You can now see what table it is.
thanks
G. Lakshmipathi
Maybe you are looking for
-
What's the best way to move a project from one HD to another?
I have a movie I've been working on for 2 years. The entire project is on an external hard drive. I recently got a new macbook pro and would like to take the project off of the external hard drive and move it to my macbook pro hard drive (my extern
-
Since upgrading to SharePoint Server 2013 SP1 (April 17th release) our search for people returns results but the links to the User Profile My Site page are invalid (double URL Encoding). If, from the search results page, a user clicks on a person the
-
Has anyone ever installed a G4 logic board into a G3 iBook?
I was just wondering if it was at all possible to install a G4 logic board in a G3 iBook. To be specific, I have an iBook G3 900MHz with a faulty logic board. I could have it replaced under the Apple Logic Board Replacement Program, but I'd hate to r
-
Hi Guys, I am looking for an online tutorial that will show me how to put something like this together... Movie table: movie_id, name Actor table: actor_id, first_name, last_name Movie_Actor table: movie_id, actor_id I would like an apex form screen
-
I am using iPhoto 9 to make a book. The cover of my new book looks perfect on screen, but when print it out before I have it published the cropping is all off. There is also a red exclamation point on the cover image. I have checked and rechecked but