Front and add-in USB not working

My onboard USB works like a charm, but my front USB and the rear add-in USB do not work.  They stopped working one day, and havent worked since.  The onboard works fine.  I have reinstalled and reformatted and done all that, and nothing wants to bring them back.
Considering they both went out at the same time, I know it has to be a software problem, and not a hardware problem.  
It might have coincided with my bios upgrade, but I'm not sure.
Using K7N415 pro, not sure what bios version, its one of the overclocking ones, but probably not the newest.
If the bios is the problem, whats the latest and greatest one that fixes my problems but still allows me to overclock?

Definitely enabled in the bios.  Its not a temporary problem.  Worked one day, and then just flat out stopped working.  I rechecked the connections, and theyre fine.  There are two USB root controllers and hubs installed in the device manager, so theyre certainly installed. But anything I plug in there just doesnt register.  Doesnt even make an optical mouse light up.  I am using two low power devices on my onboard USB, and they should be totally separate from the front and addon USB bracket.  None of the ports work at all.  Any other ideas?

Similar Messages

  • IPad 2 front and back camera is not work after update iOS 7.0.4 it gives like the resolution is not adjusted

    After updating my ipad 2 to iOS 7.0.4 , front and back camera is not working it gives like very small dots or dash. I did restore from iTunes and reset by holding on the home and sleep button, I also tried to close the app from the task bar but still all trials didn't solve the problem.

    I haven't heard of this before so I doubt it's a bug. Probably something happened during the 7.04 download.
    Backup your iPhone to iTunes and restore it as a new iphone, then restore from the backup. This will give you a fresh copy of iOS 7.04.

  • I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I bought a new 5s and its front and back camera are not working, showing black image. My phone is IOS 7.1.2 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest.

    I have the same issue on my iPhone 5s
    I've closed the app and re-booted the phone several times but it did not resolve the issue.
    Upgrading to iOS 8.0.2 did not resolve it either.
    Erasing the iPhone and restoring from a backup did not resolve it.
    I'm not sure what else to do.

  • I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Wil

    I bought a new iPhone 5s and its front and back camera are not working, showing black image. My phone is IOS 7 updated, and some one insisted that its is software updation problem, and can be resolved by updating to IOS 8. Kindly suggest on this. Will this resolve my issue?

    any advise..?

  • Please help- M-audio mic nova and fast track usb not working

    Hi All,
    I just purchased a m-audio nova microphone and the fast track usb interface. I was hoping to use this to record overhead voice. However, it doesn't seem to work. I plugged in a regular microphone in both the mic and guitar input and it seemed to work. Am I missing something? I have set audio-in to fast track in both systems preference and garageband preference. The output remained built-in because my speakers are plugged into my desktop. I also tried output using the fasttrack and plugged my speakers into the fast track's interface and the my old microphone also worked ok. Is it my newly purchased m-audio nova microphone that is not working?
    Thanks.

    Sorry about that, the regular mic is not the m-audio, it has an on/off switch. I am not familiar with audio gear terms, I apologize that. When I plug this mic in, it works in both the guitar input and the mic input on the usb interface (m-audio fast track). I can also plug this mic into a guitar amp. I hope that makes sense. Even when I plug it into my G5, it works, although I use an adaptor for the plug (same size as a headphone jack).

  • German dates and "add iCal event" not working

    I have a german formatted date in a mail (like 01.08.2008 = October, 1. 2008) and Mail does recognize this as a date. But when I select "add iCal event", the popup shows the date 08.01.08 (= January, 8. 2008). This only happens with days <= 12. When there is a date like 25.01.2008 everything works fine.
    Does anyone know how I can get this to work correctly? The global language settings are all set to the correct german format (= default settings for Germany after a clean install of Leopard).

    ERRRR the eighth month is August ???
    I reported this a bug to Apple in October 2007.
    but anyway 01.08.2008 = 01 Aug 2008 in every calender system EXCEPT US I believe.
    If I create an email and just type 01.08.2008 in it, iCal does the US format - ie 1st Jan 2008 BUT try typing 01/08/2008 and my UK spec setup converts that to 01 Aug 2008, this bug has been partially fixed by 10.5.2
    Hope this helps while Apple fixes the rest of the bug.

  • My front and back camera won't work, and my flash will not either.

    I took some picture in the rain, my iPod 5th gen wasn't affected, then my iPod was dropped in a parking lot and found later. Other than that, nothing has really happened to it, but both the front and back camera do not work. When I open up a camera, it's just black. The flash doesn't work either. Can anyone help me?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar
    Unless you purchased the optional AppleCare+ extended warranty,
    Apple will exchange your iPod for a refurbished one for $99 for 16 GB 5G and $149 for the other 4Gs. They do not fix yours.
      Apple - iPod Repair price             

  • Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!

    Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!

    - Try here:
    iOS: Device not recognized in iTunes for Windows
    - Next try a different computer to help determine if you have a computer or iPod problem.

  • Bluetooth AND USB not working

    Hi friends i'm facing 2 problems1. my bluetooth is not working properly, initially it wont show any blutooth icon when i start up, but after i restart it shows and start working, every time i need to repeat this to use bluetooth. kindly suggest me the solution.2. the usb ports (3.0 and2.0) both doesnt work properly, they only detect devices wen i go to device manager and scan for hardware devices.

     I was also worried that bluetooth is not working. But eventually came to know that  this model 15R203TX has bluetooth version 4.0  which is backward compatible to other bluetooth devices of version 2.0 to 2.1 EDR. Means if your hand set or any bluetooth device is having  version 2.0 or 2.1 EDR it won't able to send any data or see this laptop model while transferring data. Moreover if you try to send data from laptop to other bluetooth device irrespective of version it is able to send data. Now it is Same with WiFi  this model is backward compatible to IEEE 802.11 a/b/g. means  you can't receive signals from this devices unless the router is having IEEE 802.11 b/g/n/ac. For USB not working may be its a BIOS issue. While boot up try to press F2 key. And enter the diagonistic blue page. There you can check the version of BIOS or try to reinstall the updated BIOS by downloading it from HP support. If  USB still not woking then try to go to nearest authorised HP service centre.

  • HT4367 I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?

    Welcome to the Apple Community.
    Are you following these instructions.
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

    I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

    You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I bought Hp 15 g207ax, 2 out of 3 usb not working, and all drivers missing, no ethernet or no wifi

    i bought a new Hp 15 G207AX.
    issue 1 - 2 out of 3 usb not working, 1 usb 3.0 and 1 usb2.0 not working. 1 usb 2.0 is working properly
    question 1- is it because of faulty laptop or driver issue? also, if it is driver issue, then why 1 usb 2.0 is working?
    issue 2 - All Drivers are missing.
    question 2 - where can i find all the drivers?
    issue 3 - no ethernet and no wifi connecting
    question 3 - is there a driver for ethernet too? can you tell me what drivers i need to install for ethernet or wifi. because without those, i cant do anything?
    looking for your immediate reply. as if in 1st question, if usb ports are defective and laptop is faulty, i will ask for a replacement or refund.

    Likely all of these issues would be fixed with the chipset driver.
    Did you look at the solutions listed in that other forum post I linked to above?
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages and I need to!  Please help!!  "Add page" is not working!!!

    I have worked many hours on an iphoto book and I am up to page 29.  I cannot add any more pages past that and I need to!  Please help!!  "Add page" is not working!!!

    Fixed it thanks to similar questions and answers to them.  Thanks all!

  • With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

    I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    prompted to update iTunes today and now it does not work.  tried reinstalling and caanot successfully reinstall.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

Maybe you are looking for

  • CSS problem?

    I'm not sure what I did, but somehow I have managed to change a preference (or something?) in DW8 which is screwing with my templates and HTML files. The buttons I've created are now coming out as linked text, and the format of the page in the templa

  • REgarding Assignment details in RRI

    Hi Masters Now I have done RRI and this is working fine. There is one modification when I right click on 0calday that should not go to jump target(receiver query report). Hence, i have fixed delete type in assginment details in RSBBS for 0calday. Eve

  • CSS11501 - stuck when trying to download firmware

    I tried to FTP a new version of firmware to my 11501 last week. For some reason it got stuck at about the 3MB mark and just keeps sitting there churning like it's still trying to grab it. I've killed the FTP process on my desktop and rebooted the CSS

  • Can anyone explain to me why on god's green earth....

    ....Apple doesn't allow me the ability to turn off automatic downloads for TV Shows/Movies? It boggles my mind. I watch a TON of TV shows. I cut the cord a year ago and I have 12 shows that I have purchased season passes for. Every single episode get

  • Where used list for RFC function module

    Hi All, Is it possible to list where the RFC enabled FM is getting called? I mean in which all system (say RFC present in some Dev system, it might be called somewhere in other systems other than in Dev systems) RFC is getting called. Kindly suggest.