Front row and itunes turning on when apple tv begins

Why does my computer itunes and front row always turn on my computer when I start watching my apple tv?  They play two different things.  I start watching the apple tv and then my computer will start blaring my itunes library or will start a movie using front row.  How do I stop this from happening?

Welcome to the Apple Community.
Your remote is controlling both devices.
If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System_Preferences/Security/General)
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

Similar Messages

  • Different Playlists in Front ROW and iTunes

    Hello
    I am new in using Front Row and i have some trouble with it.
    When i use the MUSIC playlists then they are not the same playlist as they are in the itunes 9.
    For example i have a "BEST OF" playlist. In this playlists are only 5 Star rated songs (about 60 songs) and when i open Front Row than i have in this playlist totally different songs aditionally.
    By the way, is there any possibility to check how many songs are in the playlists in FRONT ROW, so i can compare to itunes.
    thx for help
    Markus

    No, you are not dumb. It apparently does not show in Front Row.
    Ugh.. I am getting so frustrated with this. Surely someone at Apple wants to be able to play their music videos contiguously from within Front Row...???

  • Front Row and iTunes Radio

    Hi,
    I found no other forum for my question.
    Therefore I post my message here:
    I have a brand new iMac G5 20" (build in iSight) and I missing the iTunes radio station in Front Row.
    Is this not supported yet?
    Sorry for my bad english. I'm from germany
    Greetings, Bernd

    Hello David,
    same problem internet radio and itunes.
    Sorry, I mean "internet radio" too and not an real radio
    Work around
    make a new playlist called radio
    Drag the radio linke into it then start front row and
    you should see the Radio playlist
    Thanx, I will try it.
    Greetings, Bernd

  • How can I stop my apple tv remote from affecting my laptop?  It turns on Front Row and iTunes.

    Every time I use the remote to my apple tv it interferes with my macbook and starts the Front Row application or change the volume or make iTunes start playing.  Even if I am standing away from the laptop with my body between the lap top and the apple tv using the remote this happens.  It drives me insane and makes me want to throw my laptop out the window.  Truly, this is making me crazy.

    Hi All,
    I have a problem... my SETTINGS / SECURITY/ GENERAL tab does not have an option for IR?
    I'm on a macbook pro 10.7.5
    My options are:
    A login password has been set for this user
    Require password for sleep & Screensaver
    Show a messsage when screen saver is locked
    Disable Automatic Login (this is checked)
    Allow application downloads from:
    Mac App Store
    mac App store & identified developers
    Anywhere ( this is checked)
    HELP! My remote just keeps playing itunes on my macbook pro when i'm trying to change the channels on Apple TV. Argh!
    Any ideas?
    Thank you!

  • Possible to use both Front Row AND Media Central with same Apple Remote?

    Dear Fellow Mac Users,
    I have just got a copy of Media Central as i want to use it to view movie files with due to its great codec support. however due to its slightly sluggish and cumbersome design i'd like to continue to use front row for my itunes and dvd needs. whatsmore i'd like to be able to command both programs when i want them using my apple remote. is this possible?
    Tim

    Yes. I do this right now - mainly using Media Central, and switching to Front Row if I have .mkv files to watch.
    What I do is since you hit "Menu" to load Front Row, I just went into MediaCentral's preferences and had "Play" launch MediaCentral. Once you are in one, it 'grabs' the remote commands, so you shouldn't have to worry about it loading the other program.

  • Front Row and itunes problem

    Just got my new Macbook Pro and migrated my stuff over from my Powermac Quad G5. Problem when I try to run itunes from Front Row saying that my library is empty and no songs could be found. I have re - set the music folder in i-tunes but that hasn't corrected it.....I have around 3000 songs in the library which work ok when I open from the itunes icon.
    I photo works just fine, but also getting the server problems when trying to load movie trailers.

    Same here. I just got my new MacBook Pro two weeks ago, and I tried to use Front Row this week, and it claims that my iTunes library is empty. However, I have 228 songs, and when I launch iTunes normally, it is fine. Front Row launches iPhoto, movie trailers, and DVDs just fine. Any ideas?
    Thanks!

  • 10.6.2 Front Row and iTunes video still stutters

    I thought this was going to be fixed. What's really odd is Quicktime X no longer stutters.....
    Was the FR stuttering "fixed" for anyone?

    Further Clarification
    Front Row will not play my HD content. Plays the .mp4 content fine, in fact plays it better over my wireless network than iTunes does over wireless but iTunes will not play .mp4 content now (10.6.2) without stutter even when loaded on the MAC HDD.
    I have not used Front Row before because I always used iTunes with iPod Touch as the remote so I don't know if this has always been a limitation with Front Row. Still prefer the iTunes method but the bulk of my content is .mp4 format.
    I'll probably go back to 10.5 so don't upgrade to Snow Leopard if you have mixed iTunes movie/TV content.

  • ISight, Front Row and Apple remote problems

    I've been using my iMac G5 with the built in iSight for a month now with no problems, however a few days ago I tried to pause iTunes with the remote and nothing happend.
    I have since tried to use Front Row and cannot launch it with the keyboard shortcuts, or indeed, find it anywhere on my hard drive. Very strange as I have certainly not deleted it and only updated it to 1.01 recently.
    I have also tried to use my iSight to test the remote using an Apple help sheet but when I launch iChat AV it tells me I have no camera installed! I know it did work as I took a photo of myself when I first set the Mac up.
    Apple's advice on deselcting the 'Disable remote control infrared receiver' checkbox in 'system preferences>scurity' confuses me further as I cannot find this checkbox anywhere.
    I have performed all the updates with Software Updat, repaired permissions and checked the disk with no problems found.
    Any advice?
    Thanks in advance. Jon
    iMac G5   Mac OS X (10.4.4)  

    Front Row will be included with the next version of Mac OS X to come out next year, version 10.5 (Leopard). Until it's released, there is no legal way for you to use Front Row. Also, until it's released, we won't know what hardware will work with it (as far as remote controls). If history is any indication, it will be a $129 upgrade for your current Mac mini.
    There are a couple of options for you right now, though. There's a shareware program called Media Central that will work similar to Front Row for you.
    -Doug

  • Front Row tiger problem [only works when iTunes already open]

    Ok this has never happened before and don't know why its started to happen;
    When I open up front row and go to movies,playlists or artists etc and click select, the little circling buffer symbol comes up and stays there. Nothing happens so I just have to force quit out of it.
    But, if I already have iTunes open, and then open up front row, and can select and play anything from within front row.
    Before I was always able to open front row without itunes already being open.
    Then only thing that I thought could be contributing was that a few days ago I installed you control: tunes which is an iTunes controller that stays in the menu bar.
    But even if i have this running or not, the problem with front row still persists.
    I've repaired any permissions I had but still no luck.
    Any suggestions??
    running MacBook C2D 2.16GHz with OS 10.4.11
    thanks, b.

    I apologise but there IS a new .plist file in ~/user/library/preferences. Still no fix though.
    I'm assuming its the first link I need because the second one is for leopard.
    When I try and install the .pkg I get an alert that says:
    'This software update requires a Macintosh with a built in IR receiver running Mac OS X 10.4.5'. I am running 10.4.11 and my apple remote is working just fine???
    I had Remote Buddy installed, thinkng that that may be causing the problem, but after uninstalling that, the problem still persists.
    Message was edited by: b_sheridan

  • Front Row and bluetooth headset

    Hi
    I'm using a bluetooth headset (no mic) and each time I enable it I don't have sound at all in front row. It works fine when I use this headset and run quicktime or itunes fron desktop but as soon as i switch to front row it stop working. Sometimes I may hear 1 or 2 sound effect when I scroll in the fron row menu but as soon as I try to play a movie or a music, I don't hear anything.
    Is there any tips to know to make them work together ?
    Tks,
    Xavier

    I have the exact same issue. I've filed a bug with apple, but no response. This is with the latest version of Leopard, on a Core 2 Duo Mac Mini

  • I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?

    I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes.  Any ideas?  I am on Windows 8.1 and my iPod is a Classic

    Hi murr18140,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • Iphoto and itunes files disappeared when i upgraded to os mavericks. How can i access these files?

    iphoto and itunes files disappeared when i upgraded to os mavericks. How can i retrieve these files? Time machine is not opening my backup files on an external Lacie HD.

    Apple keeps books for a short time (used to be 40 days. I've not seen a recent time frame)
    What version did you have?
    Books do nor exist except in the iPhoto database so you can not "find" a book vista TM. You restore a previous library (be sure NOT to overwrite your current library) and switch to it
    LN

  • Quiting front row and continue to play music

    It used to be that front row would continue to play music after you quit it from the same playlist but this isn't the case anymore. If you are using FR to listen to music and quit the music stops playing. Anyone know how to have the music continue to play?

    Well as much as I like the look of the new Front Row, I don't like the same thing, That it stops playing music upon closing. The older one (Tiger) was so much better Animation and usefulness wise. It also supported Air-Tunes (my best friend). So I thought to myself, "is there any way i can switch back to Front Row from Tiger (A.K.A. Front Row w/ Air Tunes)". I went on a hunt on the internet and I came across this web site
    http://www.edalytical.com/articles/2008/01/16/front-row-and-airtunes-back-to-tig er-for-me
    When typing the code into the terminal field, you can just copy and past for safety if need be.
    Just rememeber to exorcize caution whenever using terminal, for it can really do damage.
    And one more thing, I've realized that when going to the video/movies section it likes to freeze (though it always has for me for some reason when I was running Tiger). DVD Function works perfectly.
    Hope that helps!

  • Reinstalling Front Row and Photo Booth?

    Hi,
    I had a hard drive failure a couple of months ago on my 20" G5 iMac. The Apple store replaced it in a day and reinstalled the OS. Thanks. Only after I had my entire computer set back up with all my apps, music, movies, etc., I realized that Front Row, and Photo Booth were not installed. How can I get them back on my machine without reinstalling the OS again? I tried Pacifier, but I don't know all of the different files and packages needed to intsall those two apps. Anyone know of a different solution?
    Thanks

    Hey there ... Go search for a program called Pacifist. Its a shareware but it will let you do the job. I used it before to Install Mail which I accidently trashed it. It should absolutely work for Front Row too. Hope this will solve your problem. Sawadee Krub

  • Front Row and an external hard drive?

    I would like to be able to access files--pictures and movies--using Front Row and the remote, but would like to access these files from an external hard drive. Is this possible to set up/do? Thanks for the help!

    Jack,
    Create an alias to any folder on your MBP and you can then modify it to point at a folder on your read-only drive. Just open the Get Info window on the alias and Select New Original from the General section. It might not refresh to look as if it's changed the path, but it has. Close the Get Info window and re-open it to see that it's changed. Rename the alias to something more appropriate and move it to the Movies folder of your MBP. Front Row will display the folder in the Movies section of Videos.
    MacBook Pro 15", 1.83GHz, 2GB, 100GB 7200rpm   Mac OS X (10.4.7)  

Maybe you are looking for

  • 'class' or 'interface' expected_Error while activating mapping

    Hi All, I am getting this error while activating a mapping that has UDF's. The UDF is a very simple one and there is nothing wrong with the arguments, syntax or anything in the UDF. But it simply won't activate. <b>usr/sap/XD1/DVEBMGS01/j2ee/cluster/

  • How do I reconnect my iTunes with the files?

    So my wife, after not using iTunes for awhile, opened iTunes to find absolutely nothing at all. No lists of any artists or songs at all; it was like we just bought a new Macbook and opened iTunes on it. All her media files are on an external drive (m

  • Wireless WLAN Reporting

    Hi Currently running WCS7.0.164.0. Currently we're got 2 WLAN.  A 3rd is about to be activated which is Guest Access which is outsourced. What I'd like to do is get some figures of the traffic flow trough these WLANs. I'm guessing the Client Traffice

  • Wireless connection drops

    I know this has been covered in other threads, but I haven't seen my particular situation elucidated. So here goes. I'm using an Macbook C2D, an iBook G4, and an Airport Express connected to a ADSL modem. On the Macbook, I get intermittent stalls on

  • Problem finding WordService for Contract Generation in SAP E-Sourcing5.1

    Hi, I'm currently deploying Contract Generation Web Service in SAP E-Sourcing5.1/CLM 2.0 SP02. The problem is that I can't find WordService software which is mandatory for adding XML Schema in MS Word. In the instGuide it says that the installer is o