Front Row kills my KVM keyboard?

This is a pretty specific issue, but I have been finding that after going into Front Row, my USB keyboard, attached to a two-port KVM switch, is no longer responsive. I have to unplug the KVM from my PC and then from my MacMini, plug them back in and I'm good to go.
Probably the KVM switch's problem, not Front Row's, but I can replicate the issue readily and was wondering where I can start troubleshooting.
Thanks,
JJJ

Are you using the Apple remote to control Front Row? What happens if you try to use the keyboard to launch and control Front Row the whole time? Maybe you can discover at exactly which point the keyboard stops working? You can type Apple-esc to open Front Row from the keyboard. Then use the arrow keys and the "return" key to select. The "esc" key works like the "menu" button.
-Doug

Similar Messages

  • What are the keyboard commands to control Front Row

    I'm new to Front Row and running it on a 17" G4 PC. Since it isn't remote-control compatible how can I navigate and operate Front Row with just the keyboard. I need to know what key strokes to use to do stuff.

    Command+esc key turns ON Front Row
    The up and down arrow keys let you choose the selection
    The Enter key allows you to enter that selection.
    Volume when playing music is the up or down arrow keys.
    Command+esc key will back you out of any window and all the way back to the computer if you keep hitting those keys.

  • Front Row Disappears

    I have Front Row (1.3.1) running on an early 17-inch Intel iMac on 10.4.11, except that it is randomly disappearing. I’ve searched the message boards and Apple’s posted information without much success.
    When the computer has been off for at least an hour and then booted up, Front Row works via the keyboard shortcut as well as with the remote. Anywhere from 10 to 30 minutes later Front Row won’t launch using either mode. And, the option under the System Preferences pane for Security to “Disable remote control infrared receiver” also disappears.
    I have reinstalled the entire OS and applications from the ground up (wiped the drive clean). None of the applications are out of the ordinary (Adobe CS and MS Office 2008, Canon print driver, Canon scanner driver, and the rest is standard Apple apps). Prior to the clean install of everything the system wouldn’t update to Front Row 1.3.1 because it didn’t think the iMac had the infrared feature.
    I don’t know when this disappearing act showed up in terms of OS or firmware updates.
    Any assistance would be welcomed.

    I'm not sure what to say. The fact that Front Row stops working and the option to disable the IR receiver in the Security System Preferences seem to happen at the same time would indicate to me that the IR receiver is not available to Mac OS X. I don't remember ever hearing of an application or utility that was interfering with the receiver. Some people claim that florescent lights interfere with IR signals, but (and that has resolved issues for people here), but that wouldn't interfere with the Mac's internal connection to the IR receiver.
    If it continues to happen, you might want to take the computer into an Apple retail store or local Apple Authorized Service Provider for a more sophisticated check-up.
    -Doug

  • Wah??? Down Arrow activates Front Row?

    Well, the Question title pretty much says it all. On my laptop, pressing the down arrow (both on its own and in conjunction with other buttons) brings up Front Row. Every Time. I effectively don't have a down arrow.
    The weird thing is that once I'm in Front Row, the down arrow works just fine.
    This is the strangest bug I have ever seen. I worked at the Apple Store for 3 years diagnosing people's problems and I have no idea. Anyone else have any ideas?
    P.S. I haven't tried deleting Front Row yet, but I would prefer a solution that lets me keep Front Row, if anyone has one.

    Hi,
    Sounds like Keyboard short cut has been added to either the Front Row App or to Keyboard and Mouse in System Preferences.
    10:34 PM Tuesday; May 25, 2010

  • Front Row randomly activates itself

    Hi,
    I have Leopard running on a MacBook with bluetooth mouse and keyboard.
    Every so often, Front Row activates itself. I am happily doing something else on my Mac, the screen darkens all of a sudden and Front Row appears.
    I am definitely not triggering it via Ctrl-Escape, and definitely not using the remote (or any other iRdA device).
    Any ideas? Anyone else encounter this?
    It never happened under Tiger.
    Cheers,
    Dan

    I am having the exact same problem. I am on a MacBook Pro running Leopard, but had this problem with 10.4 as well. I also have a bluetooth keyboard, but I have an RF mouse (Logitech MX1000). I am certain that I'm not triggering Front Row by bumping the keyboard, and my remote is not being touched.
    Any help would be most appreciated. This is quite annoying and happens usually a few times a day.

  • 'Front Row' hack Backfired - I think ......

    The problem I'm having started with the Optical Drive not responding to the Open/Close key. Then I noticed there are no System Preference icons in my Menu Bar - date & time / sound / displays / user ... it's empty. I discovered in sys prefs the the 'tick' marks for 'show in menu bar' won't stay ticked.
    I think this is related to trying to get Front Row going on my G4 MDD with OS 10.4.11. After downloading and installing FR you need to download and run an app called 'Front Row Enabler'. It is supposed to 'enable' the cmd - esc key shortcut to launch FR. Well, it didn't work and I believe has corrupted my system preferences to the point of .... System Preferences crash when I try and get in to Keyboard Shortcuts and the other issues I mentioned above.
    The read me that came with the 'enabler' says this:
    +1 - Download Front Row 1.0.1 from Apple.+
    +2 - Install the package using Pacifist. (The installer won't run unless you have a new iMac.)+
    +3 - Run 'Front Row Enabler' from the disk image. This will patch OS X (BezelServices.framework and BezelService.loginPlugin, to be exact) so it thinks you have an iMac G5 remote.+
    +4 - Reboot+
    +5 - Open the Keyboard & Mouse Preferences and enable the Front Row shortcut under the Keyboard Shortcuts tab.+
    +6 - Press cmd-esc and enjoy! (You may also change this shortcut in the Keyboard & Mouse Preferences)+
    After I ran the enabler and rebooted I saw in Sys Prefs that the shortcut for FR had been automatically enabled, I did not have to select it. Believing at this point that the enabler did more than it was supposed to and failed at what it was supposed to do.
    The issue is this .... I can't get my dvd drive to open. If i could I would simply reinstall my system, but ... no drive .... no install.
    I've tossed sys prefs .plist among other things - at a loss.
    Help Please!

    wishing it were that simple ... I have no dvd drive .... at least one that I can get opened. This computer has no 'precious' data on it fortunately, it's merely a family browsing / gaming computer and it was headed for fame as our HT media center.
    found this http://voice.firefallpro.com/2006/03/front-row-enabler-bringing-back-your.html but the last half is no longer available on the internet; i.e. the latest enabler and andrews fix for removing FR. I have downloaded and reinstalled the bezel files as in the first part of the directions, also went in to terminal and did the permissions part. From there on though the files and info don't exist, at least through the links provided there.
    Any other thoughts please.

  • Headless mini disagrees with Front Row

    FYI. I'm running a Mini Intel headless via Timbuktu. With no monitor attached the remote does fine controlling iTunes, but when one tries to invoke Front Row, either via the keyboard or the remote, it results in a blank white screen. This was news to Apple, so I thought I'd post the info.
    Mini Intel Core duo   Mac OS X (10.4.6)  

    Interesting, I've never tried Timbuktu with Front Row but Apple Remote Desktop works fine.

  • Keyboard disabled with Front Row

    Since I upgraded to Leopard, the keyboard no longer works when Front Row is open. The only thing I can do with the keyboard is Opt-Cmd-Esc, forcing Front Row to quit. Remote works fine, but keyboard arrows, Cmd-Esc to close, etc. do nothing on the keyboard.
    Does anyone know how to fix this?

    I have the same problem with my MacPro. It only affects one user. Try adding another user and see if that user sees the same issue. I have not been able to find what it is that is causing the issue with the one user. I have removed preference related to both front row and keyboard without any luck.
    Front row was not availabile for the Macpro before Leopard.

  • Front Row - Did the 10.6.3 update break keyboard control?!

    So, I came across an odd problem today when helping a friend get her data moved from an old iBook G4 onto a new MacBook Pro 2.66GHz. I walked her through setting up the Migration Assistant while on the phone and drove over to help her install some new software. When I got there, she said she was exploring some of the new apps and Front Row looked like it had frozen on her. It wouldn't respond to the arrow keys, Return, or even Command-Escape. Force-quitting via Command-Opt-Esc worked though. I opened Front Row again, and the same thing happened. For kicks, I grabbed my Apple Remote from my backpack and tried it... it seemed to have control just fine, but the keyboard still didn't. Baffled, I told her I'd look into it more later.
    When I got home, I tried it on my MBP 2.53GHz and... low and behold... keyboard control wouldn't work on my machine either! I find this very strange because less than a month ago under 10.6.2 (I held out on 10.6.3 for quite a while... was just lazy, I admit) I KNOW I had full control without needing any Apple Remote to do it! I used it for photo slideshows, movies, and quicktime trailers with NO PROBLEM at all. Now, suddenly, under 10.6.3, I can't use Front Row without an Apple Remote?! What gives??
    Am I being stupid or blind to some simple setting somewhere, or did Front Row seriously take a change for the worse and disable keyboard control?? If anyone else can chime in here, it would be most appreciated, particularly if you know of a way to help me regain control like I had before without needing an Apple Remote. (For a computer that sits less than two feet away from me, this is a real annoyance!) Thanks for the help!

    I have tried that now, but still the same and now my wi-fi printer has stopped working - it is in the print and scan folder and showing as idle but when I send something to print it appears in the folder but does not print. This too was working fine before the update.
    I am afraid as a newbie Mac person all this is just far too much for me. After spending £1500 on a machine only 4 days ago, over £50 on books from Amazon to make sure I learn about the Snow Leopard OS X platform, I do not expect to have these issues from just a simple update. When I wanted to turn back the system to 10.6.2 Apple Care told me I have to re-load the iMac operating system to put it back into its original state - on a pc you would just have to do system restore and the whole thing would have been corrected in 5 minutes whilst I waited for all the apparent issues to be resolved relating to the current update.
    I have packed it and today it is going back to the shop - sorry I really tried but this experience is just too much for me - but thanks for all your help.

  • Front Row keyboard function

    I have a laptop and occasionally I do a key combination that triggers Front Row. I don't use Front Row on this computer, is there anyway to turn off Front Row?

    You can turn the keyboard function off if you go to *System Preferences* then click *Keyboard & Mouse*. From here click Keyboard Shortcuts and deselect "Hide and show Front Row".

  • Front Row & keyboard illumination

    I'm not sure if I asked about this before, but I can't find it anywhere in the forum, so, here's the thing (possibly, again). I have the keyboard illumination set to turn itself off after 30 seconds sitting still. It works perfectly fine anywhere within OSX expect Front Row. It turns itself off when I'm in the Front Row menu, but not during movie playback in Front Row. Could anyone try this, I'd like to know if it's just my computer or if it's actually a normal behavior...

    No comments?

  • Bluetooth keyboard crashes front row

    Hello,
    I've patched Front Row to work on a G5 in 10.4.11 with "Activate Front Row 0.1". I should say that the same problem I'm about to describe happened in 10.4.10 with another patch program...seems to be the BT keyboard, but not sure.
    Front Row will be humming along nicely and then shows the "keyboard lost connection" text with the keyboard icon, then, poof! It just flashes off...no warning or crash panel afterwards or anything, just poof.
    Anyone else have something similar?
    thank you.

    I have the same problem but also wanted to use the F13 thru F19 to launch programs and web browsers I use regularly. I called Apple Tech Support since I just got the new keyboard and was told that Leopard does not allow the user to program the function keys. The Tech Support sent me an article (http://www.info.apple.com/kbnum/n42674/) that says MAC OS 9 allowed the user to program function keys but not OS X.
    I seems strange to me that Apple would come out with a great keyboard and have 7 function keys ( 9 counting F5 and F6) that cannot be programmed with a brand new 10.5 operating system. The Tech Support told me to check out third party software but I have not been able to find any third party software that would allow me to program the function keys. I'd be interested in buying the software if anyone knows if it exists.
    I hope Apple corrects this problem in future OS updates. Why make a keyboard with function keys that cannot be programmed?

  • Scrolling through videos freezes Front Row

    I have many home videos in iTunes and thus Front Row. When scrolling up and down the list of videos in Front Row, I see the thumbnail sized videos begin to run. Eventually Front Row freezes when scrolling up/down through the list. Remote doesn't respond, keyboard and mouse do not respond and ultimately I have to either remotely logon and kill FrontRow.app or reboot. I know that all of these videos are playable without error using the QT player and in iTunes so the files are OK and furthermore are playable in the thumbnails again the next time in FrontRow.
    Anyone see this problem and know how to fix or work around? Thanks in advance.
    BTW, these videos are full sized H.264 videos converted from DVDs I had previously made with a miniDV camcorder. I've played iPod sized versions of these videos in Front Row with no problem except that now I am using an HDTV and the iPod sized versions are no longer good enough.

    I agree, but the problem only occured while scrolling. I was able to play each of the videos beginning to end. The problem was reproducable over a short time but not with any particular set of videos. In any case, the problem did go away as I am able to scroll up/down through all the videos with no problem. There's also been a few firmware updates, OS updates, and quicktime updates. Any of these could have fixed the problem. I'm happy to have my 'media center' Mac back in action.

  • Is there a way to open Front Row without the remote?

    I wonder, is there some keyboard shortcut that will open front row?
    I ask because a while ago I was about to force-quit an application(cmdoptesc), and then I cancelled(esc) that and toggled to another application's window(cmd+tab), etc., all of this using only the keyboard. But because of the application that wasn't working right, things got slow, and after waiting a couple of seconds for the other window to appear... Fron Row just appeared in front of me!!!
    I don't know if it was some keyboard shortcut that i accidentally pressed, or just a bug. Does enyone know?

    Command + Escape
    arrow keys
    return
    and escape to bail
    good luck
    -j

  • MBP Clamshell Mode - DVI to TV Adapter - Front Row Works - But No Video?

    Hi all,
    Have picked up an Apple DVI to TV adapter for my MB Pro. Have successfully got it to work in clamshell mode displaying Front Row on the TV without the external Mouse or keyboard.
    However, it will not play videos or movies on the TV.
    If I keep the lid open, it will play the video/movie on both displays as hoped. However, when I close the lid, all other Front Row stuff works - but no video picture! Is this some sort of overlay issue? How can I fix this? I do NOt want to burn my LCD when using it this way - would be a waste.
    Please pass on any thoughts!
    Thanks,
    Stu

    I also have this exact same problem. A little annoying since I have just spent $A35 on the mini dvi to dvi adapter and another $A50 on a good quality DVI cable. My LCD tv is set to millions of colors so that is not the issue.
    I have a 2.0Ghz Core2Duo Macbook. A quick google search If anyone knows how to fix it I'd be very grateful.

Maybe you are looking for

  • What is diff b/w Include Structure and Append Structure at Database Level

    Hi Experts, Could you please let me know what is the main difference between .Include Structure and .Append Structure at SE11? Thanks in advance and for good answer will give good points. Sekhar

  • IP Phone VPN connection to ASA using Anyconnect

    Hello, I will be configuring my first Anyconnect VPN to allow an IP Phone to connect over the internet.  I wanted to know what the best practice is in generating a certificate on the ASA...is self generating ok or get one from a CA?  What are the con

  • ITunes won't open in Tiger: Crash log included

    Hello, I've got iTunes 9.2.1 and Quicktime 7.6.4 installed on my iMac G4/800 (2,1), with 768MB RAM and a new install of Tiger 10.4.11, all the updates completed. I have not installed any iTunes plugins, and in fact, don't have any audio files on this

  • Property change listener error with jtabbedpane

    Greetings I have a property change listener on my jtabbedpane (2 panes (index 0 of course and index 1). my problem is when i want to run my app it gives me a java null pointer exception. I believe it is b/c it is starting the app and it see the prope

  • Creating an attribute editor like panel from Interface Builder

    The Attributes Inspector from Interface Builder presents the user with a great set of options that are neatly organized in folding panels. I really want to do something like this for a project I'm working on to help organize a large set of options th