Front Row won't work at all

Before the latest update of "Keychain and Login" my Front Row app would work partially
with blanking out in the slideshows and movies, However now it won't work at all.
Is there a fix in the works for this problem?
Dave

Figured it out...
The "Front Row" settings were set for a screensaver, That's why the monitor kept blanking out,
I've turned off the screensaver in the settings and "Front Row" works fine now.
There is no screensaver image chosen, That's why the screen kept going blank or even off.
Dave

Similar Messages

Front Row won't work in my user account

So I have followed the threads about non-working Front Row. Mine worked at 1st instal, but when I loaded a a bunch of MP3s into iTunes and then went to Front Row it spat the dummy.
I did as one poster suggested, made another user account; logged in, and Front Row worked immediately. Going back to me as the user, it wouldn't work.
As I understand it, this behaviour points to a preference file problem (?). If so, how does one correct the file problems (editing, delete etc).
I did an archive and instal - same problem
I did an erase and instal - same problem
I trashed the 1.3 update and attempted to re-instal it thru Software Update - but it didn't show as available, altho other software appeared.
From all this, can anyone give me some advice on what I do now? Many thanks for an information.

An update for anyone viewing.
I used the Apple-Esc combination from the keyboard and Front Row worked! But only once.
I came across a topic that suggested "pairing" the remote to my computer by aiming the remote at the Apple logo on my machine, 3-4" away, and pressing the Menu and Fast Forward buttons simultaneously. And that worked! And its continuing to work!
Now, after I'm finished my session and I get back on my machine again - the trick is for Front Row to continue working.
Hope these hints help anyone who might have my problem.

Front Row won't play playlist

I've worked with Apple Technicians on 3 different occasions and we have done everything to try and fix this problem. I have 2 iMacs ICD that you can't play playlists on iTunes using Front Row. We've re-loaded the music, re-loaded iTunes from scratch, thrown away prefrences, reloaded the system software using the Apple DVD's. Has anyone else had this problem? Apple seems to be stumped and so am I. Everything else in Front Row seems to work fine. I can also play songs individually through Front Row with no problem, just not the playlist's.
HELP?

My 19 yr old son was thinking outside the box and told me to select all the songs in the Library to see if Front Row would play the playlists then . . . it worked. I feel like a fool, but not too bad because Apple Techs didn't think of that either.

The front row is not working. Remote control not triger,

Front row is not working, Remote control no response, command-esc not triger as well.
check keyboard shortcut from system preference, there is no front row.
anyone know why?

Ok first try it in another Account.
1. Open the account system pref window (System Preferences > Accounts)
2. Click the plus button at the bottom
3. Specify an account name (ex: test)
4. Add account
5. Logout of your current account, and login to the newly created one
If it works, then something was wrong with your account, move your files to the new account, and delete the old one.
If it did not work:
1. Try the reinstall again (DO NOT DO "ARCHIVE AND REINSTALL", as this may keep some file that is hindering FR from operating correctly
2. Make sure the FR file is in the Core Services Folder (Macintosh HD/System/Library/CoreServices/Front Row.app)
3. Make sure that you do not have the IR sensor turned off on your computer (System Prefs > Security > Uncheck "Disable Remote Control IR Sensor")
4. Make sure that your remote is paired (http://docs.info.apple.com/article.html?artnum=302545)
5. Make sure that the Command + Esc key is setup to respond by opening front row:
(1) Open system prefs
(2) Open keyboard & mouse prefs
(3) Click keyboard shortcuts
(4) Scroll down until you see front row
(5) Assign the Command + Esc key if it is not mapped
6. Finally, if all else fails, call AppleCare while your computer is still under warranty
Hope this helps,
Cory

Front Row don't work on new Imac Intel.

Hello, i have a problem . i bought an Imac intel isight Mac OS tiger 10.4.7 few days ago , at the beginning front row it's ok becouse i have tried it at once but now if i use the remote control front row doesn't work. it's possible that the problem is connected with the update of itunes 7 ? becouse before the update front row was ok! can you help me ? thanks a lot
imac Mac OS X (10.4.7)

Having what appears to be the exact same problem. Just got my Imac a few days ago, front row worked when I hit menu on the remote at first but all of a sudden nothing happens?? Let me know if you find out anything. Thanks.
OXX

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Well, yes, data does get corrupted sometimes.
The trick is finding what data.
By 'cleaned' are you therefor meaning that the drive has been erased and the system re-installed?
Because that's the quickest way to deal with such a situation.
Back up the system first of course,
Add back 3rd party apps one at a time in case one of them is causing the problem.

Installed itunes 6 and now CD/DVD drive won't work at all

I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Computer Corporation Inspiron 5160
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: ASAPIW2K (6.0.2.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: SONY DVD+-RW DW-D56A, Rev PDS7
Drive is empty.
E: ROXIO DVD-ROM EMULATOR, Rev
Drive is empty.
If anyone has a solution for this stupid problem that would be great.
Thanks

Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
http://support.microsoft.com/default.aspx?kbid=290301
Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify you have sufficient privileges to start system services. Now, iTunes won't work at all.

11.1.4 gives me an error message that says Service "Apple Mobile Device" failed to start. Verify that you have sufficient privileges to start system services. Now, iTunes won't work at all.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

TS4079 My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

My ipad microphone next to the front camera, is not working at all, what can I do if the warranty is not available

Did you flip the switch?
http://i1224.photobucket.com/albums/ee374/Diavonex/91e9edf6b2127310428d94cf75cb6 15a_zps380c63c4.jpg

Front row video doesnt work any more....

After around two months of complete operation front row now doesnt play videos, when selected i get the following message:
'YOu dont have any movie files in the movies folder in your home folder'
In the finder window, the little blue movie icon isnt there anymore, instead theres just a normal blue file.
Think i need to get the blue movie icon back in the finder window.
Anyideas how i can get this back?
ta

Did you rename or move your "Movies" folder?
If you have your user home directory in the sidebar (far left hand side of the finder window that looks like a house), click on that.
Do you see a folder named "Movies"? If you do, is there anything inside it?
If you accidently renamed it or moved it out of your home directory, Front Row won't be able to find your movies.

Front Row for Lion works with Movies, Photos, but not with Music!

Hi guys,
what do i do wrong? i installed front row and everything works fine, just no music. i always get the message...
FRONT ROW CANNOT FIND ANY SONGS!
so at first i thought there is something wrong with this app, but then i realized, movies and photos are working perfectly!
maybe someone has a simple solution for that problem?

Hi guys,
what do i do wrong? i installed front row and everything works fine, just no music. i always get the message...
FRONT ROW CANNOT FIND ANY SONGS!
so at first i thought there is something wrong with this app, but then i realized, movies and photos are working perfectly!
maybe someone has a simple solution for that problem?

The tools on Adobe Photoshop Elements 9 seemed to have frozen. The crop symbol is 3 of the symbols nest to each other. The hand move tool is not one hand but 3 next to each other. Other tools won't work at all. Really nice!

Ya, okay ! I use a number of PSE programs, one of which is PSE 9. The tools for some reason seem to have frozen. When I use the move tool I don't get just one hand but 3 hand symbols all next to each other. Same thing with the crop tool, I don't get one symbol but 3 all next to each other. There are a couple of tools that just don't work at all. It's like the PSE 9 got hit with some virus or sorts. Oh well, live and learn. Trying to get through to tech service is next to impossible.

Have you seen this other thread you started about this problem?
Photoshop Elements 9 is messed up.
Did you use Barbara's fix?
It would be less confusing if you only posted this question once, not three times:
HOW DO I RESET ALL THE TOOLS IN PSE 9 ? THE CURSOR IS REALLY MESSED UP AND DOES NOT WORK WITH THE TOOLS. I TOUCH THE HAND AND I GET 3 HANDS, I TRY TO USE THE CROP AND I GET 3 SMALL CIRCLES. THE CURSOR IS REALLY MESSED UP. DO I HAVE TO GET ANOTHER PSE 9 ?
Photoshop Elements 9 is messed up.
The tools on Adobe Photoshop Elements 9 seemed to have frozen. The crop symbol is 3 of the symbols nest to each other. The hand move tool is not one hand but 3 next to each other. Other tools won't work at all. Really nice!

Color replacement tool won't work at all

Hi, I am using photoshop CS3 in 10.6.2. The color replacement tool is not a tool I have much experience with, but am wondering why it won't work at all. I have reset the tool to its default preferences and tried using it on multiple documents and with different users and it just won't work. Nothing happens at all. I have watched some tutorials on using the tool and it looks easy enough and quite straight forward to use. I have tried every setting for the tool and still nothing happens. I am working on the top layer and have not selected anything. I have tried merging all the layers onto one layer incase the tool wasn't working because it would only replace the color of what is on a layer.
Thanks for your help.

The mode is color. The sampling is continuous and the limits are contiguous. These are the default settings for the tool.
I am noticing that the tool does work a little. I created a new document with 3 layers. The bottom layer is a white background. The middle layer has a blue square on it and the top layer is blank.
I notice that the color replacement tool won't work on the white background layer or the top blank layer, but only works on the middle layer. Does the tool only work on the same layer that has a color you are trying to replace?
When I hit the command option shift E keys to merge the layers into a copy, the tool only worked on the part of that layer that had the rectangle drawn on it and ignored the white part of the image.

Sync with .mac never seemed to work great, now won't work at all

sync never seemed to work that well for me, now it won't work at all. I get the following message now:
.Mac Sync Error
A failure occurred while synchronizing the .Mac Sync Client.
I've tried reseting all the .mac stuff, but nothing seems to work now. Its pretty frustrating. Plus, while mac support in the store and over the phone is superb, .mac support online is a joke. Doesn't anyone have any suggestions?

With the exception of a framework reset, iSync no longer has anything to do with .Mac synchronization, which is instead handled exclusively by .Mac Sync.
I would start with a search of this forum for the error messages you describe:
http://discussions.apple.com/forum.jspa?forumID=957
Some of the same users who answer questions here regarding iSync, also do that there for users of .Mac Sync.

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

The screen repair was botched. Take iPhone back to place of screen repair, and have them get the home button working again.

Front Row won't work at all

Similar Messages

Maybe you are looking for