FS10n Line item display issue

Hi,
When we are displaying line items in credit side of FS10N (double clic option), the result shows some line items with positive sign (It supposed to show only minus sign in all items). Is it correct? Is there a reason? Is it a bug?
If someone has an idea please let me know,
Thanks in advance,
Roberto C.

Hi Roberto,
please check, whether the mentioned items represent negative postings. Check if BSEG-XNEGP ='X'.
Please check note 1258687 as well.
Regards,
Joosz

Similar Messages

  • Problem with cents:"G/L Account Bal. Display (FS10N)  vs. Line Item Display

    Dear colleagues,
    We have used BSIS table within a batch input program using standard transactions such as F-02 and OASV, in order to leave several "old" G/L accounts completely up to zero, and therefore transferring their complete amount to "new" G/L accounts.
    What we see in several "old" accounts after doing the transfer is that system still displays me 1, 2 or 3 cents in transaction FS10N......but if I double click for its G/L account line item display, system correctly tells me that the old g/l account is completely balanced. Logically, for I have checked in BSIS table through program which is the necessary amount to balance the old g/l account.
    So we can say there is a lack of coordination between what I see in the first screen of FS10N and the Line Item display screen of the g/l account. No doubt, old account is completely balanced and well transferred to new g/l account (checked in BSIS table), but FS10N still reports few cents.........isn´t it somehow mischievous?
    Does anyone know how to clean those cents (which actually are virtual cents)? Is there any sap note reporting this bug and providing the solution?
    Thank you so much for your kind attention on reading my post and best regards.
    F. Albisu

    Dear Neeraj,
    Yes you are right, there a lots of notes related to this issue.
    I have found note 595776 which I think best fit with my problem. Would you hindly read it and confirm to me, from your point of view, I am in the correct track?
    (Of course, the system I am talking to you abput, proceeded to the Euro Conversion in 2002)
    Thanks!

  • Line item display in FS10n

    During our configuration days, we have set the Line Item Display indicator in all our GL accounts (ex, Sales account). Details of our SALES transactions in FS10n are posted by document, per material per profit center (same material and profit center, still displayed per line item) thus creating a large number of line items.  We want it to be posted in FS10n by document number but still per material but summarized by profit center (total of material per profit center), to reduce the number of line item display in FS10n. How can we change it? Do we need to configure it? Please guide me.
    Thanks a lot and more power!!
    kay

    Hi dear... the following links may guid u ...
    http://help.sap.com/saphelp_47x200/helpdata/en/fa/9fbcf9416811d182b10000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/2c/276be1456a11d189440000e829fbbd/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/96/8b457343ce11d189ee0000e81ddfac/frameset.htm
    Assigne points if useful
    Thank u - Dasharathi

  • Line item display problem FS10n

    Dear expert ,
    after run program RFSEPA01 to activate line item display in account xxxx. The display is FS10N  for 2011 is document in year 1997-1998.it should be line item balance for 2011.
    How to correct this problem?
    Kindly your advice.
    Thank you

    Hi,
    I would like to display line item display for cumulative balance  in FS10N.
    How to get cumulative balance line item in FBL3N?
    This is error after run program RFSEPA01
    Kindly advioce
    Thanks

  • Populate Assignment Field in G/L line item display (FS10N/FBL3N)

    Hi All,
    I am using FS10N to see G/L Account Line Item Display.
    I am seeing the Report Display with Coloumns like Doc.No., Type,Doc.Date,Amount in Local Currency etc etc
    There is coloumn showing Assignment.The entries are not getting populated/displayed under the same coloumn of Assignment
    When I go to Change Layout I see th Assignment field but the nothing is getting dislayed under the Assignment coloumn when I run FS10N/FBL3N.
    How do I solve the above problem?
    Thanks
    Vivek
    Edited by: VIVEK KAPOOR on Dec 11, 2009 4:11 PM

    Hi ,
    Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
    Thanks
    Vivek

  • Adding  fields in the  transaction  FS10N ( G/L  Account LIne Item  Display

    Hi all,
    in G/L  Account Balance Display( FS10N)  once i get list display when i click
    CUMULATIVE DISPLAY button it will go to G/L  Account LIne Item  Display list
    Here i have to add CUSTOMER field (sold to party or partner)  And NAME field in
    the list beside G/L account and  company code fileds
    Please let me know how to proceed.
    shall i have to do any back ground setting or
    i have to copy the program in to Z program
    then modify?
    urgent requirement
    please let me know
    thanks

    Hi,
    For writing a substitution exit code you will need the help of your ABAPer.
    Use T Code GGB1 to create a substitution. In the application Area select Financial Accounting --> Line item.
    Create a substitution for your company code. Under Substitution Create Step. When you click on step it will give you a list of fields in BSEG table. Select field name XREF1 or XREF2 or XREF3 any one. In the next screen select "Exit". In the Prerequisites give conditions as BKPF-BUKRS = 1000 (your company code).
    In the Substitution select your exit code against  your XREF1 or XREF2 or XREF3 field.
    While writing the exit code you can give the logic as select BSEG-KUNNR and pass to table KNA1. Then populate BSEG-XREF1 with KNA1-NAME1
    Save this substitution and activate it in T Code "OBBH"
    While writing Substitution exit copy the standard program "RGGBS000" and create your Z program. Write your new code in the Z program. This step should be done before you create a substitution. Use T Code GCX2 and maintain your Z program against Application Area "GBLS".
    Also see to it that the Reference Key1 / 2 / 3 field is made optional in all the Posting Keys and Field Status Groups.
    Please let me know whether this helps.
    Regards,
    Swapnil

  • Additional Field(customized) in G/L acct bal line item display FS10N-FBL3N

    Steps done:
    1st: I appended an extra field(customized) to RFPOS and RFPOSX structures.
    2nd: Went to FIBF and looked for BTE applicable and found sample_interface_00001650. (Line item display: Add data per line)
    3rd. I copied sample_interface_00001650 with a name of zsample_interface_00001650 and added line of codes for selection to fill the extra field I added.
    4th. I assigned the event found in FIBF=>Environment=>P/S Modules=>of a SAP application.
    5th. I executed RFPOSXEXTEND program in SE38. After running, RFPOSXEXT was updated but not RFPOSEXT.
    I run FS10N and check for the field I added if existing. The extra field is existing however when I tried to move the field to the columns to be displayed in ALV, I got an error saying that there are inconsistencies in table T021S and RFPOSEXT.
    Please help. Thanks.
    Is there a certain program needed to update RFPOSEXT just like RFPOSXEXTEND for RFPOSXEXT?

    Hi ,
    Actually when i do FS10N or FBL3N to see G/L Account Line Item Display i am able to see the display of the G/L Account but there is a coloumn under Assignment and it  shows no entries i.e. Assignment coloumn is blank.What should i do so that i get entries for assignment field because there are entries made in Assignment field.Table is BSEG and the field is ZUONR.How do i get these entries in the G/L Account Line item display for G/L Account using FS10N ?
    Thanks
    Vivek

  • Difference in GL Balance display and GL line item display

    Dear All,
    Can any one help me why the difference between GL display and GL line items display?
    Thanks in advance
    regards
    Elan

    Hi,
    You can do the following:
    1. carryout gl balance carryforward from previous to current year : Use t.code:F.16
             You can cross check the fs10n balance with FBL3N balance from previous years.  Assume these balance are matching for previous year 2007 and 2008, you have this problem only in 2009, then you can carryforward this balance from 2008 to 2009 once again. Some times users may post some adjustment entries as per the auditors recommendations. If this balance is not matching from 2007 itself, then first carryforward the balances to 2008 then 2009.  You can run this transaction no of times.
    2. check the master data of gl account through t.code:FS04, whether any changes has been done to line item display field?
               If you find any changes to line item display field then run the program "RFSEPA01" to get all the line items.
    3.If your issue was not resolved even after the above two activities, then let me know the  sap version you r working.
    all the best
    Prasad

  • Profit center clearing accounts line item display

    Dear all,
    I have implemented  document splitting at  profit center level.
    The zero balance clearing account (profit center clearing account) is open item managed and also line item display tick is  put. eg both ticks are active.
    I am trying to see the line items in the account using fbl3n,fs10n etc but am not able to view the line items althought the balance of the account is  visible in fs10n.
    the message i get is 'no line item selected'.
    Pl suggest some way through which i can see the line items of the profit center clearing account.
    Regards,
    Rishikesh

    Dear Venkatesh
    I am also facing same problem, I am using T Code FAGLL03 to display Line Items for Zero Balance Clearing A/c but I am not getting line item display instead it is giving following error.
    =========================================================================
    “Account 141010, company code VALC is clearing account
    Message no. MSITEM111
    Diagnosis
    You have stored account 141010 in company code VALC as a clearing account. At the same time, you use line item management with this account.
    System Response
    Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
    Procedure
    Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
    =========================================================================
    Please do suggest me.
    Thanks in Advance
    Regards
    Ratnakar

  • Segment Clearing A/c (GL account)-Line item display

    In our case new GL is active with segment clearing scenario.  The Segment Clearing A/c (GL) is maintained as line item display and open item.  However, when we view it from FS10n, period-wise balance is there but when we click on, no line item drill down is not displayed.  What is the solution to get line item display ?

    Hi,
    When you create Segment clearing account, line item display should not be ticked in FS00, only then you will be able to see the line item display.
    There is a standard SAP not also on this issue. I dont remember the note but you can find it in service.sap.
    You also do not need to keep it open item managed.
    Regards,
    SAPFICO

  • GL & Vendor Line Item Display

    Dear Forum,
    The users want to display the Vendor Codes in the GL Line Item Display to reflect the corresponding vendor related to the expense in the GL line item and also want the GL Code to be displayed in the Vendor Line Item to reflect the nature of expense incurred thru that vendor. Are there any standard reports that could provide the details in this manner. Oherwsie how could we change the layout of the GL and Vendor line item Reports.
    Thanks for the help.
    Regards,
    Moderator: Please, search SDN before posting. This question has been answered 2-3 times only last week, not speaking about more recent period (as already mentioned by our SAP colleague)

    HEllo,
    In flb3n you can  do this by using the offsetting account logic which is explained in details in the SAP Note 112312.
    This way you can see vendor/customer information in the Line items report for GL ACcounts.    
    This issue has been discussed several times before. If you search the forum you'll see the replies.
    REgards,
    REnan

  • PO no not reflecting in GL/ Vendor line item display

    Hi Guys,
    Please let me know that why PO no (column is displaying but) data not reflecting in GL/ Vendor line item display using TCode FS10N? What may the possible reasons and how I can get the data flow in the column?

    Hi Amit,
    You are right and I've changed the layout. I've already said that the field displaying there but data is not flowing in the field. I mean to say that PO no is not reflecting in the specified field. However I am able to get the PO no. in  Assignment field. What may be the reason and how I get the data (PO no.) in this field?

  • RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

    I'm still hoping that someone can help with this issue.
    Here's a repeat of the original question:
    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

  • Vendor line item display -effective exchange rate showing inverse

    Dear All,
    We are using direct quote. In vendor line item display FBL1N . effective exchange rate field showing inverse for all currencies except USD.
    Issue: Rates are maintained in Direct quote then why in FBL1N its showing Indirect quote, but in header it showing correctly as direct quote.
    (eg AUD shows 1.31 instead of /0.76 even though shows /0.76 in
    document header)-  also how to add a field BKPF-KURSF Exchange rate in fbl1n layout.
    Kindly help me to resolve this issue.
    Regards
    Shanu

    How did you solve it?
    Regards
    Pablo

  • Withholding tax showing zero value in vendor line item display report

    Hello Friends,
    I have facing one strange issue in withholding tax, when im executing report of vendor line item display(fbl1n tcode) the column for withholding tax is showing zero value for some documents even though the tax is been deducted which is clearly visible in f-02 entry.
    Kindly help me on this!
    Regards,
    Sunny

    Hi,
    1.Please check the WHT config has been done properly.
    2.Check the vendor master and varify tax fields are filled up.
    Regards

Maybe you are looking for

  • How to get DP name via script

    Hello, We are migrating from Symantec Altiris to SCCM 2012. In our current environment we have both HP models and now moving towards Lenovo models. We are using both respective Enterprise solutions for managing driver that is HP SSM and Lenovo Thinin

  • Erratic syncing on iPhone 5s with iTunes 11

    I am going crazy trying to sync my iPhone 5s with iTunes 11.1.3.8. There is plenty of space as my iPhone is 64gb with apparantly 36.5gb available. Approx. 15.4gb of this is currently taken up by music, but it should be far more. I don't know if it is

  • Error 1155 when loading Itunes

    Think I've got a Windows Millenium package and when trying to load itunes, very early in the install it comes up with: 1155:File E:\INSTMSIA.EXE not found any ideas?

  • I can't get "Always open in list view" to stick.

    No matter how many times I click "Always open in list view" for the folder, it continues to open up in icon view. Help please. I used to think that I had this problem because I was working mainly off an external drive. But, this folder is on my inter

  • HP p1006 will not install on Lion 10.7

    I have an HP Laserjet P1006 printer.  I have updated my software with software update several times.  I have also downloaded the updated drivers for HP from Apple dated April 2013, which I noticed in another posting.  When I attempt to add a new prin