FSL-06002 Error 1060
During installation of WAS6.4SP9 i see the follwowing error in the log:
ERROR 2005-02-21 13:19:18
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (255), with parameter (SAPOsCol).
what does this error point to? what could be the effects when running EP6SP9 (as i faced problems logging in and therefor reinstalled NW)?
thanks patrick
Hi Patrick,
if i got you right, you uninstalled and reinstalled the WAS successfully? The error is the result of a trial and error step during installation, trying to open the service SAPOsCol and, if it doesn't exist, create it. So, if your reinstallation succeeded, nothing to really worry about.
Hope that helps.
Regards,
Stefan
Similar Messages
-
NetWeaver 04 SneakPreview Slim Error FSl-06002 Error 1060
I am running on Windows XP pro SP2 with 768 RAM. This is virtually an identical problem as raised by Ngoc Pham.
My system and DB have the ID J2E
The installation hangs during the SAP system installation (phase 2 of 24). Below is an extract from the log:
INFO 2005-09-16 21:46:28
Stopping SAP system services for J2E.
ERROR 2005-09-16 21:46:28
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (SAPOsCol).
ERROR 2005-09-16 21:46:58
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (SAPJ2E_01).
ERROR 2005-09-16 21:46:58
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (266), with parameter (SAPJ2E_00).
the installation does continue and ends at
INFO 2005-09-16 21:48:19
Execution of the command "C:\usr\sap\J2E\SCS01\exe\sapstartsrv.exe -r -q -p C:\usr\sap\J2E\SYS\profile\START_SCS01_ToshibaC28 -s J2E -n 01 -U ToshibaC28\SAPServiceJ2E -P XXXXXX -e ToshibaC28\j2eadm" finished with return code 0. Output: Service succesfully installed.
In addition to these error messages there were also several warning messages, the significance of which I cannot estimate. They were as follows:
WARNING[E] 2005-09-16 21:38:46
Error converting from service name=sapmsJ2E/protocol=tcp to port number. SAPRETURN=12
WARNING[E] 2005-09-16 21:38:46
Error converting from port number=3601/protocol=tcp to service names. SAPRETURN=12
WARNING 2005-09-16 21:46:21
Error 5 (Access is denied.
) in execution of a 'RegOpenKeyEx' function, line (336), with parameter (DirectInput).
WARNING 2005-09-16 21:47:29
While copying files to 'C:\usr\sap\J2E\SCS01\exe': source file 'C:/Documents and Settings/Adrian/My Documents/Downloads/SAP/Netweaver/NT/I386/UNINSAP.EXE' not found.
The services file had the following entries added before the installation hung:
sapdp01 3201/tcp # SAP System Dispatcher Port
sapdp01s 4701/tcp # SAP System Dispatcher Security Port
sapgw01s 4801/tcp # SAP System Gateway Security Port
sapgw00s 4800/tcp # SAP System Gateway Security Port
sapmsJ2E 3601/tcp # SAP System Message Port
I would be grateful for any help.
Adrian StaintonI'm willing to bet the bank you are attempting a re-install after a previous (possibly failed) installation attempt.
There's no way to truly uninstall the Sneak Preview once you have attempted a previous install. If you're on XP then use a System Restore (Accessories -> System Tools -> System Restore) and select a restore point on a date BEFORE you ever tried to install the Sneak Preview. After you do, the machine will reboot. Make sure all your prerequisites are still intact and run the install and it should work.
I did this myself after one week of banging my head on this. Best of luck --Shibli -
FSL-06002 Error 14001 This application has failed to start
Hello Folks
I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
The installation is under Windows 2003 server SP2 and Oracle 920
I'm in the Database Instance Installation (non-unicode) and phase 29 (Updating database statistics)
The following error is:
TRACE [synxccuren.cpp:452]
grantAccessTo
Granted access rights 0xf01ff for object default to user chavez-server\mauadm with inheritance flags 0.
TRACE<i> [synxccuren.cpp:1045]
CSyCurrentProcessEnvironmentImpl::setUser()
Switched to user: mauadm.
ERROR 2009-08-23 13:27:58
FSL-06002 Error 14001 (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
) in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\MAU\SYS\exe\run/brconnect ...).
When i ran the brconnect manually i received the same error (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem)
When i ran brconnect using cmd.exe i received the following error
E:\usr\sap\MAU\SYS\exe\run>brconnect.exe
The system cannot execute the specified program.
I think is important mention this, i had problem 1 setp before about the brtools 7.00
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output:
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance MAU failed
BR0280I BRCONNECT time stamp: 2009-08-23 13.06.43
BR0804I BRCONNECT terminated with errors
I downloaded the correct version (640) DBATOOLS Package for Oracle 9.2 and i replaced the files
Please folks someone have any idea about this, i tried search on the web and nothing, on the marketplace and nothing
Thanks all for your help>
Markus Doehr wrote:
> > I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
> > The installation is under Windows 2003 server SP2 and Oracle 920
>
> and something on top: 640_EX2 is only for Oracle 10g - it won't work with Oracle 9.2. So you should change your kernel to 640 back - then the R3DLLINS works.
>
>
>
>
> Markus
Ok Markus, i did the following
First i downloaded vcredist_<platform>.exe from Microsoft web page and retry the installation
And the following error i got
Operative System open's a Window that say following
brconnect.exe Unable to locate component "this application has failed to start because orasql10.dll was not found. Re-installing the application may fix this problem"
And this is the log
WARNING 2009-08-23 17:52:07
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 128. Output:
ERROR 2009-08-23 17:52:07
CJS-00288 Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 128.<br>SOLUTION: See brconnect.log for details.
Second i downloaded the kernel 640 whitout ext2 and i get the following error
INFO 2009-08-23 17:41:32
Output of E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU is written to the logfile brconnect.log.
WARNING 2009-08-23 17:41:32
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output: BR0801I BRCONNECT 6.40 (51)BR0252E Function _popen() failed for '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' at location BrPipeOpen-4BR0253E errno 2: No such file or directoryBR0272E Execution of program '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' through pipe failedBR0303E Determination of Oracle version failed
ERROR 2009-08-23 17:41:32
CJS-00288 Could not update database statistics.<br>DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 3.<br>SOLUTION: See brconnect.log for details. -
FSL-06002 Error 193 during Database Instance
Hello, I am getting FSL-06002 Error 193 on step 29 (Update Database Statistics) of database instance. Please Advice.
Thank You.
ERROR 2008-01-01 15:34:55
FSL-06002 Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (C:\usr\sap\V11\SYS\exe\run/brconnect ...).
Detail Log:
INFO 2008-01-01 15:34:55
Removing file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB\brconnect.log.
INFO 2008-01-01 15:34:55
Creating file C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB\brconnect.log.
INFO 2008-01-01 15:34:55
Switched to user: v11adm.
ERROR 2008-01-01 15:34:55
FSL-06002 Error 193 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (284), with parameter (C:\usr\sap\V11\SYS\exe\run/brconnect ...).
INFO 2008-01-01 15:34:55
Working directory changed to C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB.hi syed
stop installation and login with sidadm user and goto brtolls menu
from brtools menu ---> update databse statastics manually from brtolls and after completion this process u start installation
I think this may be helpful for u
Regards
vasu -
FSL-06002 Error 2 is occuring for WEB AS Java 640 when applying SP18 64-bit
Hi,
We are on SQL server 2005 , Windows server 2003 all 64-bit. We have installed WEB AS JAVA 6.40 successfully. We are trying to apply SP18 and running into error
FSL-06002 Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (284), with parameter (java.exe ...).
Any Expert guidance will be appriciate and rewarded,
ParimalHi,
I was running into the same issue with Windows 2003 Server x64 and SQL Server 2005. I followed the above suggestion of copying the java.exe executable into the SAP Patch Installation directory which for me was C:\Program Files\sapinst_instdir\PATCH\MSS. Then, when I restarted the Patch Installation, I was able to move past this issue.
Thanks for the help.
Avi Barat -
FSL -06002 ERROR 193 while DBEXPORT
hi all,
We are trying to perform system copy in bw 3.0b through R3 load procedure,whle performing the sysytem copy we getting the following error:
FSL -06002 ERROR 193 (Unknown ,try 'net helpmsg <NR>') of a 'create process' function,line (284), with parameter (D:\usr\sap\BWA\SYS\exe\run\R3ldctl.exe..)
Can anyone help us out.
Regards,
Anthony.G'Day Anthony,
Please check your database schema and make sure the SAP Services are stopped.
This will fix the problem.
Please Reward if it satisfies you.
Regards,
Sai Raghuram.S. -
FSL -06002 ERROR 193 while DB Export
Hi all,
We are trying to perform system copy in bw 3.0b through R3 load procedure,whle performing the sysytem copy we getting the following error:
FSL -06002 ERROR 193 (Unknown ,try 'net helpmsg <NR>') of a 'create process' function,line (284), with parameter (D:\usr\sap\BWA\SYS\exe\run\R3ldctl.exe..)
Can anyone help us out.
Regards,
Anthony.Did u get the solution
-
SAP Web AS Java 6.40 installation - FSL-06002 Error 19
hi,
we are trying to install SAP WAS 640
we downloaded the file SAPinst_SP_WAS640.exe from SAP's site.
At an early stage of the installation we get the error :
ERROR 2004-08-24 14:53:47
FSL-06002 Error 19 (The media is write protected.
) in execution of a 'GetTempFileName' function, line (205), with parameter (W:/).
what is the problem ?
why does the installation refer to w:/ ?
i did not choose the w:/ drive !
This error happens very early, right after i click the "i agree" button of the license screen.
Note - i don't know if this causes the problem, but Rational Clear Case is installed on my w:/ drive
thanks
Assaftry to unmap the drives and install it. I have seen the installer trying to get write permissions on all the mapped drives
-
Failed to open service OracleDEV102TNSListener , error 1060
Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
<b>ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor</b>".
I have set the all the Environment variables , i run r3trans -d and the result is
<b>C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).</b>
<b>I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"</b>
Event Viewer result is
<b>----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.</b>
finally in SAPINST logs i could see
<b>
Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully</b>
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards, -
Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
ThanksHello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter -
Error 1060 Event server, integration services.
Hola,
Actualmente tenemos un problema al momento de instalar SAP 2007. Cuando se terminado de instalar totalmente el Server tools, Server y client. El server tools tiene dos herramientas nuevas que se llaman:
Event Sender Services
Integration Services
Estas herramientas me aparecen deshabilitadas y me aparece el mensaje: "Error 1060, el servicio especificado no existe como servicio instalado". ¿Que debo instalar para que se habiliten esas herramientas?
Saludos.Saludos Elias,
Integration services forma parte de las funcionalidades de integración de B1i. El mismo puede ser instalado en las instancia de SQL uicamente con el puerto por defecto (1433).
Deben verificar si estan utilizando una instancia diferente a la que se asigna por defecto. Ejemplo de una instancia de este tipo (YourSQLInstanceSQLExpress).
Adicionalmente les invitamos a revisar la nota 1107410, la cual documenta los detalles para configurar los puertos previo a el intento de instalación.
Esperando lo anterior les permita solventar lo reportado.
Juan Manuel Marrero
SAP Business One Forums Team -
FSL 0001 error in SAP NetWeaver '04 SR01 installation
Hi!!!
I have a problem while I'm installing SAP NetWeaver '04 SR01 installation Abap system, central installation.
I hace Oracle 9 and Windows 2003 Server. I'm installing locally. I'm installing from the hard disk (D:) and the drive E is the DVD Drive (but i'm not using it)
The installation give me the following error:
FSL-00001 System call failed. Error 267 (The directory name is invalid.
) in execution of system call 'GetTempFileName' with parameter (E:/), line (328) in file (synxcfsmnt.cpp).Hello,
I have been experiencing the same problem exactly for the last 2 days.
If you did not find any solution yet, here is the solution that worked for me perfectly.
if you are installing from your hard drive, check your cd/dvd drive if there is any cd or dvd in there, if so remove it and re-install the central instance.
YOUR CD/DVD DRIVE SHOULD BE EMPTY, all the way your installation
It should work.
good luck. -
I can't get the converter to work, the reported error is something about a mismatch between the JAR and JAD files, but I copied the attribute text directly so they have to be the same. The readme says something about a known bug 4511054 Error Code 1060 when converting JAR with MANIFEST at the end to PRC
What does that mean? Does the manifest have to be at the start of the JAR? If so, how can I force the jar utility to do that?
WBB[wbrogden],
The bug states that there was a problem with the PRC converter tool for the MIDP for Palm OS 1.0 BETA release. This bug is fixed in the officially released version of the MIDP for Palm OS 1.0 which is now available at:
http://java.sun.com/products/midp4palm/download.html
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/ -
Failed to open service OracleVIS_db111_RDBMSTNSListener , error 1060.
Hi,
I am unable to connect to sqlplus
Enter user-name: /as sysdba
ERROR:
ORA-12518: TNS:listener could not hand off client connection
when I am trying to start the listener using addlnctl.cmd below error is encountered.
D:\OraVIS\oracle\11.1.0\appsutil\scripts\VIS_hoqaoravis01>addlnctl.cmd start VIS
ECHO is off.
ECHO is off.
Fri 01/14/2011 09:28 PM
ECHO is off.
ECHO is off.
Fri 01/14/2011 09:28 PM
VIS_hoqaoravis01.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : D:\OraVIS\oracle\11.1.0
LOCAL : VIS
ORACLE_SID :
PATH : D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVI
S\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11
.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-t
hread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\O
raVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWi
n32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsut
il\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl
\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracl
e\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\ora
cle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;
D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bi
n;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\ora
cle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\
appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread
\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS
\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x
86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jr
e\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.
3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.
1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\1
1.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\Or
aVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\
OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\1
1.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsu
til\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\
OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\orac
le\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-mu
lti-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin
;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin
\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\a
ppsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0
\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\
oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVI
S\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0
\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\j
re\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVI
S\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11
.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-t
hread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\O
raVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl\5.8.3\bin\MSWi
n32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracle\11.1.0\appsut
il\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\perl
\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;D:\OraVIS\oracl
e\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\ora
cle\11.1.0\perl\5.8.3\bin\MSWin32-x86-multi-thread\;D:\OraVIS\oracle\11.1.0\bin;
D:\OraVIS\oracle\11.1.0\appsutil\jre\bin;D:\OraVIS\oracle\11.1.0\appsutil\jre\bi
n;D:\erpapp\10.1.2\bin;D:\erpapp\10.1.2\jdk\jre\bin\classic;D:\erpapp\10.1.2\jdk
\jre\bin;D:\erpapp\10.1.2\jlib;D:\erpapp\10.1.3\bin;D:\OraVIS\oracle\11.1.0\bin;
C:\Perl\site\bin;C:\Perl\bin;C:\cygwin\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WIN
DOWS\System32\Wbem
LD_LIBRARY_PATH : D:\OraVIS\oracle\11.1.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"D:\OraVIS\oracle\11.1.0\appsutil\log\VIS_hoqaoravis01\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process VIS ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 14-JAN-2011 21:28
:37
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hoqaoravis01)(PORT=1521)
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 11.1.0.7.0 - Production on 14-JAN-2011 21:28
:38
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 11.1.0.7.0 - Production
System parameter file is D:\OraVIS\oracle\11.1.0\network\admin\VIS_hoqaoravis01\
listener.ora
Log messages written to D:\OraVIS\oracle\11.1.0/network/admin\vis.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hoqaoravis01)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=hoqaoravis01)(PORT=1521)))
STATUS of the LISTENER
Alias VIS
Version TNSLSNR for 32-bit Windows: Version 11.1.0.7.0 - Produ
ction
Start Date 14-JAN-2011 21:28:43
Uptime 0 days 0 hr. 0 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\OraVIS\oracle\11.1.0\network\admin\VIS_hoqaoravis01
\listener.ora
Listener Log File D:\OraVIS\oracle\11.1.0/network/admin\vis.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hoqaoravis01)(PORT=1521)))
Services Summary...
Service "VIS" has 1 instance(s).
Instance "VIS", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
My environment is R12.1.1 on windows 2003 with 11.1.0.7 database.
Database was up and running fine since one month. Once the server was rebooted issue started.
l
listener.ora file
VIS =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = hoqaoravis01.appsdba.com)(PORT = 1521))
SID_LIST_VIS =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME= D:\OraVIS\oracle\11.1.0)
(SID_NAME = VIS)
STARTUP_WAIT_TIME_VIS = 0
CONNECT_TIMEOUT_VIS = 10
TRACE_LEVEL_VIS = OFF
LOG_DIRECTORY_VIS = D:\OraVIS\oracle\11.1.0/network/admin
LOG_FILE_VIS = VIS
TRACE_DIRECTORY_VIS = D:\OraVIS\oracle\11.1.0/network/admin
TRACE_FILE_VIS = VIS
ADMIN_RESTRICTIONS_VIS = OFF
SUBSCRIBE_FOR_NODE_DOWN_EVENT_VIS = OFF
IFILE=D:\OraVIS\oracle\11.1.0\network\admin\VIS_hoqaoravis01\listener_ifile.ora
sqlnet.ora
NAMES.DIRECTORY_PATH=(TNSNAMES, ONAMES, HOSTNAME)
sqlnet.authentication_services= (NTS)
SQLNET.EXPIRE_TIME= 10
tnsnames.ora
VIS = (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=hoqaoravis01)(PORT=1521))
(CONNECT_DATA=(SID=VIS))
VIS_LOCAL =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=hoqaoravis01)(PORT=1521))
VIS_REMOTE =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=hoqaoravis01)(PORT=1521))
I tried with specifying ip address for HOST but still not working.
Ran adcfgclone.pl dbTechStack <xmlfile> but same issue.
Experts thoughts are appreciated.
Regards,Hi,
I disabled all the services restarted windows server and enabled /started the services....... it worked.
Typical windows environment.
Hussein I was unable to start listener instead I ran adcfgclone.pl dbTechStack xmlfile
so that listener comes up but the same error I pasted earlier. I changed the port and execute rapid clone, but no luck.
As DB/listener is required to execute autoconfig, DB/Listener was not coming up.
Once the DB/Listener came up I executed autoconfig which completed successfullly.
Thanks for all your valuable time/efforts.
Regards,
M.A.Moazzam -
SAP ERP 2005 SR 2 IDES installation error in step "Run ABAP Reports"
Hello,
I'm installing SAP ERP 2005 SR 2 IDES on Win2003 R2 SP2 and Oracle 10.2 to create a test-system for my diploma thesis.
During the step "Import ABAP" I got the following message:
object_checker.log
ERROR: 2008-05-21 20:50:38
1 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
invalid_objects.txt
package object type action status
SAPDFACT ?N pkey create
but the installation went on until "Run ABAP Reports".
Warnings and Errors in sapinst.log are:
WARNING 2008-05-27 15:09:36
Execution of the command "C:\usr\sap\IMP\SYS\exe\uc\NTI386\stopsap.exe name=IMP nr=00 SAPDIAHOST=imperia-sap" finished with return code -1. Output:
STOPSAP: execution of C:\usr\sap\IMP\SYS\exe\uc\NTI386\sapntwaitforhalt.exe name=IMP nr=00 SAPDIAHOST=imperia-sap 3600 failed
Details are written to C:\Programme\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\stopsap.log
WARNING 2008-05-27 15:09:36
Could not stop instance 'DVEBMGS00' of SAP system IMP.
WARNING 2008-05-27 15:09:38
Connect to message server (imperia-sap/3900) failed: NIECONN_REFUSED.
WARNING[E] 2008-05-27 15:12:05
FSL-06002 Error 1060 (Der angegebene Dienst ist kein installierter Dienst.) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
WARNING[E] 2008-05-27 15:21:42
FRF-00007 Unable to open RFC connection.
ERROR 2008-05-27 16:30:15
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
INFO 2008-05-27 16:30:19
RFC connection closed.
ERROR 2008-05-27 16:30:45
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2008-05-27 16:30:47
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Full log of today is available at [http://pastebin.com/f43531f97]
Has anyone an idea how I can finish this installation?
Thx
DanieleIt seems that the system did not come up and thus the RFC call fails.
What´s the output of
dev_w0
dev_disp
(in the ...work directory)?
Markus
Maybe you are looking for
-
I have a problem with the authorization of my computer: I'm signed in in the itunes store, buy a song, but when i want to play it I have to again enter my password. everytime i open and close itunes i have to enter my pasword for every song! don't kn
-
When I play songs, my iPod is silent. I press the + button and the volume goes up but then immediately decreases, back to silence. I try locking the volume in place by clicking the large button to the right (not sure what it's called...the main on-
-
Set nautilus as default file manager in kde?
I would give kde a good chance, but I have several issues with konqueror. Is it possible to set nautilus as the default file manager in kde? I have started nautilus from kde before. Is this possible?
-
Problem with Copied Business Object : SELFITEM
Hi, sub: Problem with Copied Business Object : SELFITEM I want to use changed selfitem BOR for carbon copy functionality. For it, i copied the BOR : SELFITEM. it is giving error In SWI2_DIAG it is showing like this. Work item cannot be read
-
Why is my Thunderbird connection 'timed out'?
I am new to Mozilla Thunderbird. And am not very savvy with computers. I have gone through all the settings and made sure all the ports etc are correct. In the top left hand corner where the email address [email protected] is displayed, there is a pa